parsedmarc/docs/source/elasticsearch.md

# Elasticsearch and Kibana

To set up visual dashboards of DMARC data, install Elasticsearch and Kibana.

:::{note}
Elasticsearch and Kibana 8 or later are required (parsedmarc's 8.x Python
client also supports Elasticsearch 9). OpenSearch users must use the
`[opensearch]` configuration section instead — the Elasticsearch 8.x client
refuses to connect to non-Elasticsearch clusters.
:::

## Installation

On Debian/Ubuntu based systems, run:

```bash
sudo apt-get install -y apt-transport-https
wget -qO - https://artifacts.elastic.co/GPG-KEY-elasticsearch | sudo gpg --dearmor -o /usr/share/keyrings/elasticsearch-keyring.gpg
echo "deb [signed-by=/usr/share/keyrings/elasticsearch-keyring.gpg] https://artifacts.elastic.co/packages/8.x/apt stable main" | sudo tee /etc/apt/sources.list.d/elastic-8.x.list
sudo apt-get update
sudo apt-get install -y elasticsearch kibana
```

For CentOS, RHEL, and other RPM systems, follow the Elastic RPM guides for
[Elasticsearch] and [Kibana].

:::{note}
Previously, the default JVM heap size for Elasticsearch was very small (1g),
which will cause it to crash under a heavy load. To fix this, increase the
minimum and maximum JVM heap sizes in `/etc/elasticsearch/jvm.options` to
more reasonable levels, depending on your server's resources.

Make sure the system has at least 2 GB more RAM than the assigned JVM
heap size.

Always set the minimum and maximum JVM heap sizes to the same
value.

For example, to set a 4 GB heap size, set

```bash
-Xms4g
-Xmx4g
```

See <https://www.elastic.co/guide/en/elasticsearch/reference/current/important-settings.html#heap-size-settings>
for more information.
:::

```bash
sudo systemctl daemon-reload
sudo systemctl enable elasticsearch.service
sudo systemctl enable kibana.service
sudo systemctl start elasticsearch.service
sudo systemctl start kibana.service
```

As of Elasticsearch 8.7, activate secure mode (xpack.security.*.ssl)

```bash
sudo vim /etc/elasticsearch/elasticsearch.yml
```

Add the following configuration

```text
# Enable security features
xpack.security.enabled: true
xpack.security.enrollment.enabled: true
# Enable encryption for HTTP API client connections, such as Kibana, Logstash, and Agents
xpack.security.http.ssl:
  enabled: true
  keystore.path: certs/http.p12
# Enable encryption and mutual authentication between cluster nodes
xpack.security.transport.ssl:
  enabled: true
  verification_mode: certificate
  keystore.path: certs/transport.p12
  truststore.path: certs/transport.p12
```

```bash
sudo systemctl restart elasticsearch
```

To create a self-signed certificate, run:

```bash
openssl req -x509 -nodes -days 365 -newkey rsa:4096 -keyout kibana.key -out kibana.crt
```

Or, to create a Certificate Signing Request (CSR) for a CA, run:

```bash
openssl req -newkey rsa:4096-nodes -keyout kibana.key -out kibana.csr
```

Fill in the prompts. Watch out for Common Name (e.g. server FQDN or YOUR
domain name), which is the IP address or domain name that you will use to access Kibana. it is the most important field.

If you generated a CSR, remove the CSR after you have your certs

```bash
rm -f kibana.csr
```

Move the keys into place and secure them:

```bash
sudo mv kibana.* /etc/kibana
sudo chmod 660 /etc/kibana/kibana.key
```

Activate the HTTPS server in Kibana

```bash
sudo vim /etc/kibana/kibana.yml
```

Add the following configuration

```text
server.host: "SERVER_IP"
server.publicBaseUrl: "https://SERVER_IP"
server.ssl.enabled: true
server.ssl.certificate: /etc/kibana/kibana.crt
server.ssl.key: /etc/kibana/kibana.key
```

:::{note}
For more security, you can configure Kibana to use a local network connection
to elasticsearch :
```text
elasticsearch.hosts: ['https://SERVER_IP:9200']
```
=> 
```text
elasticsearch.hosts: ['https://127.0.0.1:9200']
```
:::

```bash
sudo systemctl restart kibana
```

Enroll Kibana in Elasticsearch

```bash
sudo /usr/share/elasticsearch/bin/elasticsearch-create-enrollment-token -s kibana
```

Then access to your web server at `https://SERVER_IP:5601`, accept the self-signed
certificate and paste the token in the "Enrollment token" field.

```bash
sudo /usr/share/kibana/bin/kibana-verification-code
```

Then put the verification code to your web browser.

End Kibana configuration

```bash
sudo /usr/share/elasticsearch/bin/elasticsearch-setup-passwords interactive
sudo /usr/share/kibana/bin/kibana-encryption-keys generate
sudo vim /etc/kibana/kibana.yml
```

Add previously generated encryption keys

```text
xpack.encryptedSavedObjects.encryptionKey: xxxx...xxxx
xpack.reporting.encryptionKey: xxxx...xxxx
xpack.security.encryptionKey: xxxx...xxxx
```

```bash
sudo systemctl restart kibana
sudo systemctl restart elasticsearch
```

Now that Elasticsearch is up and running, use `parsedmarc` to send data to
it.

Download (right-click the link and click save as) [export.ndjson].

Connect to kibana using the "elastic" user and the password you previously provide
on the console ("End Kibana configuration" part).

Import `export.ndjson` the Saved Objects tab of the Stack management
page of Kibana. (Hamburger menu -> "Management" -> "Stack Management" ->
"Kibana" -> "Saved Objects")

It will give you the option to overwrite existing saved dashboards or
visualizations, which could be used to restore them if you or someone else
breaks them, as there are no permissions/access controls in Kibana without
the commercial [X-Pack].

```{image} _static/screenshots/saved-objects.png
:align: center
:alt: A screenshot of setting the Saved Objects Stack management UI in Kibana
:target: _static/screenshots/saved-objects.png
```

```{image} _static/screenshots/confirm-overwrite.png
:align: center
:alt: A screenshot of the overwrite conformation prompt
:target: _static/screenshots/confirm-overwrite.png
```

## Upgrading Kibana index patterns

`parsedmarc` 5.0.0 makes some changes to the way data is indexed in
Elasticsearch. if you are upgrading from a previous release of
`parsedmarc`, you need to complete the following steps to replace the
Kibana index patterns with versions that match the upgraded indexes:

1. Login in to Kibana, and click on Management
2. Under Kibana, click on Saved Objects
3. Check the checkboxes for the `dmarc_aggregate` and `dmarc_failure`
   index patterns
4. Click Delete
5. Click Delete on the conformation message
6. Download (right-click the link and click save as)
   the latest version of [export.ndjson]
7. Import `export.ndjson` by clicking Import from the Kibana
   Saved Objects page

## Backfilling the combined DKIM/SPF result fields

As of the version fixing [#169](https://github.com/domainaware/parsedmarc/issues/169),
aggregate documents include `dkim_results_combined` and `spf_results_combined` —
scalar string arrays that keep each auth result's selector/scope, domain, and
result paired, which the dashboards' alignment-detail tables aggregate on.
Reports saved by older versions lack these fields and will not appear in
those tables.

parsedmarc now backfills this automatically. On startup, it runs a cheap
count query against each configured aggregate index pattern to check for
documents that have DKIM or SPF results but are missing the corresponding
combined field. If any are found, it submits the backfill as a background
`_update_by_query` task (`wait_for_completion=false`), so startup is never
blocked on it; progress is logged, including the task ID. The check itself
is idempotent — once an index is fully backfilled, later startups see a
count of 0 and log nothing further — and it works the same way on
OpenSearch. Any error talking to the cluster (for example, no indexes yet
on a fresh install) is logged as a warning and retried on the next startup,
rather than aborting parsedmarc.

Which index patterns it targets follows the ones parsedmarc writes to, and
is logged at debug level on startup:

- With `index_prefix_domain_map` configured in `[general]` and no
  `index_prefix` set, every tenant prefix in the map gets its own index
  pattern, alongside the unprefixed one — aggregate and failure reports for
  a domain that is not in the map are still saved without a prefix. A
  configuration reload (`SIGHUP`) re-reads the map, so a newly onboarded
  tenant is covered without a restart.
- With an `index_prefix` set in `[elasticsearch]`/`[opensearch]`, only that
  prefix is targeted, and the map is not consulted. That is deliberate: such
  a deployment writes only under its own prefix, and an `_update_by_query`
  against a pattern it does not write to could reach another deployment's
  data on a shared cluster.
- With an `index_suffix` set, both the suffixed and the unsuffixed pattern
  are targeted, so documents indexed before the suffix was configured are
  backfilled too. Note that the unsuffixed pattern also matches any *other*
  suffix on the same cluster.

If you upgrade the dashboards without pointing the new parsedmarc version
at the cluster, or you'd rather control when the write load happens, you
can still run the backfill manually. It is idempotent (documents that
already have the fields are skipped), so it is safe to re-run. It works
identically on OpenSearch; just adjust the URL and credentials. The query
matches only documents that have at least one DKIM or SPF auth result and
lack the corresponding combined field; documents with no auth results are
skipped, because an `exists` query cannot see an empty array, and for
search purposes an empty `dkim_results_combined` is identical to an
absent one. Each result is matched on either its `domain` or its `result`
subfield as defense in depth: an empty string indexes no text tokens and
is invisible to `exists`, and the storage shape of every historical
parsedmarc version can't be audited, so matching either subfield ensures
no backfillable document is skipped.

```bash
curl -X POST "http://localhost:9200/dmarc_aggregate*/_update_by_query?conflicts=proceed&wait_for_completion=false" \
  -H "Content-Type: application/json" -d '
{
  "query": {
    "bool": {
      "minimum_should_match": 1,
      "should": [
        {
          "bool": {
            "must": [
              {
                "bool": {
                  "minimum_should_match": 1,
                  "should": [
                    {"exists": {"field": "dkim_results.domain"}},
                    {"exists": {"field": "dkim_results.result"}}
                  ]
                }
              }
            ],
            "must_not": [{"exists": {"field": "dkim_results_combined"}}]
          }
        },
        {
          "bool": {
            "must": [
              {
                "bool": {
                  "minimum_should_match": 1,
                  "should": [
                    {"exists": {"field": "spf_results.domain"}},
                    {"exists": {"field": "spf_results.result"}}
                  ]
                }
              }
            ],
            "must_not": [{"exists": {"field": "spf_results_combined"}}]
          }
        }
      ]
    }
  },
  "script": {
    "lang": "painless",
    "source": "List dk = new ArrayList(); def dr = ctx._source.dkim_results; if (dr != null) { if (!(dr instanceof List)) { dr = [dr]; } for (e in dr) { if (e == null) { continue; } def sel = e.selector != null ? e.selector : \"none\"; def dom = e.domain != null ? e.domain : \"none\"; def res = e.result != null ? e.result : \"none\"; dk.add(sel + \" / \" + dom + \" / \" + res); } } ctx._source.dkim_results_combined = dk; List sp = new ArrayList(); def sr = ctx._source.spf_results; if (sr != null) { if (!(sr instanceof List)) { sr = [sr]; } for (e in sr) { if (e == null) { continue; } def sc = e.scope != null ? e.scope : \"mfrom\"; def dom = e.domain != null ? e.domain : \"none\"; def res = e.result != null ? e.result : (e.results != null ? e.results : \"none\"); sp.add(sc + \" / \" + dom + \" / \" + res); } } ctx._source.spf_results_combined = sp;"
  }
}'
```

`wait_for_completion=false` returns a task ID — check progress with
`GET _tasks/<task id>`. Adjust the index pattern if you use a custom
`index_prefix`/`index_suffix`; with `index_prefix_domain_map`, run the
command once per tenant prefix (`acme_corp_dmarc_aggregate*`) plus once for
the unprefixed pattern, or widen it to `*dmarc_aggregate*` to cover every
tenant in one pass. After backfilling, re-import the updated
dashboards ndjson (the index pattern saved object changed too) per the
import instructions above.

SMTP TLS documents have the same class of defect one level deeper:
`policies` is an object array, and each policy's `failure_details` is an
object array inside it. SMTP TLS documents now also carry
`policies_combined` and `failure_details_combined`, backfilled
automatically at startup the same way, and the equivalent manual command
is:

```bash
curl -X POST "http://localhost:9200/smtp_tls*/_update_by_query?conflicts=proceed&wait_for_completion=false" \
  -H "Content-Type: application/json" -d '
{
  "query": {
    "bool": {
      "minimum_should_match": 1,
      "should": [
        {
          "bool": {
            "must": [
              {
                "bool": {
                  "minimum_should_match": 1,
                  "should": [
                    {"exists": {"field": "policies.policy_domain"}},
                    {"exists": {"field": "policies.policy_type"}}
                  ]
                }
              }
            ],
            "must_not": [{"exists": {"field": "policies_combined"}}]
          }
        },
        {
          "bool": {
            "must": [
              {
                "bool": {
                  "minimum_should_match": 1,
                  "should": [
                    {"exists": {"field": "policies.failure_details.result_type"}},
                    {"exists": {"field": "policies.failure_details.sending_mta_ip"}}
                  ]
                }
              }
            ],
            "must_not": [{"exists": {"field": "failure_details_combined"}}]
          }
        }
      ]
    }
  },
  "script": {
    "lang": "painless",
    "source": "List pols = new ArrayList(); List dets = new ArrayList(); def ps = ctx._source.policies; if (ps != null) { if (!(ps instanceof List)) { ps = [ps]; } for (p in ps) { if (p == null) { continue; } def dom = p.policy_domain != null ? p.policy_domain : \"none\"; def typ = p.policy_type != null ? p.policy_type : \"none\"; pols.add(dom + \" / \" + typ); def fds = p.failure_details; if (fds != null) { if (!(fds instanceof List)) { fds = [fds]; } for (f in fds) { if (f == null) { continue; } def rt = f.result_type != null ? f.result_type : \"none\"; def smi = f.sending_mta_ip != null ? f.sending_mta_ip : \"none\"; def ri = f.receiving_ip != null ? f.receiving_ip : \"none\"; def rmh = f.receiving_mx_hostname != null ? f.receiving_mx_hostname : \"none\"; dets.add(dom + \" / \" + typ + \" / \" + rt + \" / \" + smi + \" / \" + ri + \" / \" + rmh); } } } } ctx._source.policies_combined = pols; ctx._source.failure_details_combined = dets;"
  }
}'
```

It works identically on OpenSearch; just adjust the URL and credentials, same
as the aggregate command above.

## Records retention

Starting in version 5.0.0, `parsedmarc` stores data in a separate
index for each day to make it easy to comply with records
retention regulations such as GDPR. For more information,
check out the Elastic guide to [managing time-based indexes efficiently](https://www.elastic.co/blog/managing-time-based-indices-efficiently).

[elasticsearch]: https://www.elastic.co/guide/en/elasticsearch/reference/current/rpm.html
[export.ndjson]: https://raw.githubusercontent.com/domainaware/parsedmarc/master/dashboards/opensearch/opensearch_dashboards.ndjson
[kibana]: https://www.elastic.co/guide/en/kibana/current/rpm.html
[x-pack]: https://www.elastic.co/products/x-pack