Guard patch_inplace() partial-application test against JSON_NOEXCEPTION

The "distinguishing contract vs patch(): partial application on
failure" test relies on doc.patch_inplace(patch) actually throwing so
the partially-applied state can be observed right after the throw
point. Under ci_test_noexceptions, JSON_THROW() calls std::abort()
instead of throwing, and doctest's --no-throw test filter (which that
CI job passes) makes CHECK_THROWS_AS() a no-op that never even
evaluates its expression -- so patch_inplace() is never called and the
follow-up assertions fail against the untouched original document.

Guard the whole SECTION with #if !defined(JSON_NOEXCEPTION), following
the same convention already used elsewhere in the test suite (e.g.
unit-class_parser.cpp) for exception-dependent tests.

Signed-off-by: Niels Lohmann <mail@nlohmann.me>

.github/workflows/ubuntu.yml

@@ -100,7 +100,7 @@ jobs:
     container: ubuntu:focal
     strategy:
       matrix:
-        target: [ci_cmake_flags, ci_test_diagnostics, ci_test_diagnostic_positions, ci_test_noexceptions, ci_test_noimplicitconversions, ci_test_legacycomparison, ci_test_noglobaludls]
+        target: [ci_cmake_flags, ci_test_diagnostics, ci_test_diagnostic_positions, ci_test_noexceptions, ci_test_noimplicitconversions, ci_test_legacycomparison, ci_test_noglobaludls, ci_test_disableenumserialization, ci_test_skiplibraryversioncheck]
     steps:
       - name: Install build-essential
         run: apt-get update ; apt-get install -y build-essential unzip wget git libssl-dev

cmake/ci.cmake

@@ -242,6 +242,40 @@ add_custom_target(ci_test_noglobaludls
     COMMENT "Compile and test with global UDLs disabled"
 )
 
+###############################################################################
+# Disable enum serialization.
+###############################################################################
+
+add_custom_target(ci_test_disableenumserialization
+    COMMAND ${CMAKE_COMMAND}
+    -DCMAKE_BUILD_TYPE=Debug -GNinja
+    -DJSON_BuildTests=ON -DJSON_FastTests=ON -DJSON_DisableEnumSerialization=ON
+    -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_disableenumserialization
+    COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_disableenumserialization
+    COMMAND cd ${PROJECT_BINARY_DIR}/build_disableenumserialization && ${CMAKE_CTEST_COMMAND} --parallel ${N} --output-on-failure
+    COMMENT "Compile and test with enum serialization disabled"
+)
+
+###############################################################################
+# Skip the multiple-inclusion library version check.
+###############################################################################
+
+# tests/src/skip_library_version_check.cpp deliberately simulates a scenario
+# (mixing two differently-versioned inclusions of the library in one
+# translation unit) that unavoidably triggers the compiler's own "macro
+# redefined" warning, so -- unlike the ci_test_* targets above -- it is
+# compiled directly here, with a modest warning set, instead of being folded
+# into the library's own -Weverything/-Werror unit test matrix.
+add_custom_target(ci_test_skiplibraryversioncheck
+    COMMAND ${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/skip_library_version_check
+    COMMAND ${CMAKE_CXX_COMPILER} -std=c++11 -Wall -Wextra
+        -I${PROJECT_SOURCE_DIR}/include
+        ${PROJECT_SOURCE_DIR}/tests/src/skip_library_version_check.cpp
+        -o ${PROJECT_BINARY_DIR}/skip_library_version_check/skip_library_version_check
+    COMMAND ${PROJECT_BINARY_DIR}/skip_library_version_check/skip_library_version_check
+    COMMENT "Compile and run a translation unit simulating a mismatched library version, with JSON_SKIP_LIBRARY_VERSION_CHECK defined"
+)
+
 ###############################################################################
 # Coverage.
 ###############################################################################

include/nlohmann/detail/output/binary_writer.hpp

@@ -1647,20 +1647,6 @@ class binary_writer
         return 'D';  // float 64
     }
 
-    /*!
-    @brief checks whether a JSON number fits into @a TargetType
-    @param[in] el a JSON number of either the signed or unsigned integer kind
-    @return whether @a el's value can be represented by @a TargetType without
-            wrapping, regardless of which of the two kinds it is stored as
-    */
-    template<typename TargetType>
-    static bool bjdata_ndarray_value_in_range(const BasicJsonType& el)
-    {
-        return el.is_number_unsigned()
-               ? value_in_range_of<TargetType>(el.template get<std::uint64_t>())
-               : value_in_range_of<TargetType>(el.template get<std::int64_t>());
-    }
-
     /*!
     @return false if the object is successfully converted to a bjdata ndarray, true if the type or size is invalid
     */
@@ -1672,16 +1658,6 @@ class binary_writer
         };
 
         string_t key = "_ArrayType_";
-        // the type name is looked up as a string below; a non-string
-        // annotation (e.g. a number, null, or an array) cannot name a known
-        // dtype, so it is treated the same as an unrecognized type name and
-        // falls back to a plain object encoding instead of throwing
-        // type_error.302 out of get<string_t>()
-        if (!value.at(key).is_string())
-        {
-            return true;
-        }
-
         // use get<string_t>() instead of static_cast<string_t> to avoid an
         // ambiguous conversion under explicit instantiation on C++17 (see #4825)
         auto it = bjdtype.find(value.at(key).template get<string_t>());
@@ -1691,16 +1667,6 @@ class binary_writer
         }
         CharType dtype = it->second;
 
-        // the 'B' (byte) marker is only defined by BJData Draft 3; emitting it
-        // under the default Draft 2 mode would produce a stream that Draft 2
-        // readers reject, so such an object falls back to a plain object
-        // encoding instead (see the "Binary values" section of the BJData
-        // documentation)
-        if (dtype == 'B' && bjdata_version != bjdata_version_t::draft3)
-        {
-            return true;
-        }
-
         key = "_ArraySize_";
         // the dimensions are written verbatim as the header length below, so a
         // value that is not an array cannot produce a valid one: null emits 'Z'
@@ -1765,60 +1731,6 @@ class binary_writer
             }
         }
 
-        // every element is cast to the (possibly narrower) C++ type matching
-        // dtype below; a value that does not fit that type would silently
-        // wrap (integers) or overflow to infinity (the "single" precision
-        // float) instead of being reported, so such an object falls back to
-        // a plain object encoding as well
-        for (const auto& el : value.at(key))
-        {
-            bool in_range = true;
-            switch (dtype)
-            {
-                case 'U':
-                case 'C':
-                case 'B':
-                    in_range = bjdata_ndarray_value_in_range<std::uint8_t>(el);
-                    break;
-                case 'i':
-                    in_range = bjdata_ndarray_value_in_range<std::int8_t>(el);
-                    break;
-                case 'u':
-                    in_range = bjdata_ndarray_value_in_range<std::uint16_t>(el);
-                    break;
-                case 'I':
-                    in_range = bjdata_ndarray_value_in_range<std::int16_t>(el);
-                    break;
-                case 'm':
-                    in_range = bjdata_ndarray_value_in_range<std::uint32_t>(el);
-                    break;
-                case 'l':
-                    in_range = bjdata_ndarray_value_in_range<std::int32_t>(el);
-                    break;
-                case 'M':
-                    in_range = bjdata_ndarray_value_in_range<std::uint64_t>(el);
-                    break;
-                case 'L':
-                    in_range = bjdata_ndarray_value_in_range<std::int64_t>(el);
-                    break;
-                case 'd':
-                {
-                    const auto dval = el.template get<double>();
-                    in_range = !std::isfinite(dval) ||
-                               (dval >= static_cast<double>(std::numeric_limits<float>::lowest()) &&
-                                dval <= static_cast<double>((std::numeric_limits<float>::max)()));
-                    break;
-                }
-                default:
-                    // 'D' (double) already spans the full range of number_float_t
-                    break;
-            }
-            if (!in_range)
-            {
-                return true;
-            }
-        }
-
         oa->write_character('[');
         oa->write_character('$');
         oa->write_character(dtype);

single_include/nlohmann/json.hpp

@@ -18655,20 +18655,6 @@ class binary_writer
         return 'D';  // float 64
     }
 
-    /*!
-    @brief checks whether a JSON number fits into @a TargetType
-    @param[in] el a JSON number of either the signed or unsigned integer kind
-    @return whether @a el's value can be represented by @a TargetType without
-            wrapping, regardless of which of the two kinds it is stored as
-    */
-    template<typename TargetType>
-    static bool bjdata_ndarray_value_in_range(const BasicJsonType& el)
-    {
-        return el.is_number_unsigned()
-               ? value_in_range_of<TargetType>(el.template get<std::uint64_t>())
-               : value_in_range_of<TargetType>(el.template get<std::int64_t>());
-    }
-
     /*!
     @return false if the object is successfully converted to a bjdata ndarray, true if the type or size is invalid
     */
@@ -18680,16 +18666,6 @@ class binary_writer
         };
 
         string_t key = "_ArrayType_";
-        // the type name is looked up as a string below; a non-string
-        // annotation (e.g. a number, null, or an array) cannot name a known
-        // dtype, so it is treated the same as an unrecognized type name and
-        // falls back to a plain object encoding instead of throwing
-        // type_error.302 out of get<string_t>()
-        if (!value.at(key).is_string())
-        {
-            return true;
-        }
-
         // use get<string_t>() instead of static_cast<string_t> to avoid an
         // ambiguous conversion under explicit instantiation on C++17 (see #4825)
         auto it = bjdtype.find(value.at(key).template get<string_t>());
@@ -18699,16 +18675,6 @@ class binary_writer
         }
         CharType dtype = it->second;
 
-        // the 'B' (byte) marker is only defined by BJData Draft 3; emitting it
-        // under the default Draft 2 mode would produce a stream that Draft 2
-        // readers reject, so such an object falls back to a plain object
-        // encoding instead (see the "Binary values" section of the BJData
-        // documentation)
-        if (dtype == 'B' && bjdata_version != bjdata_version_t::draft3)
-        {
-            return true;
-        }
-
         key = "_ArraySize_";
         // the dimensions are written verbatim as the header length below, so a
         // value that is not an array cannot produce a valid one: null emits 'Z'
@@ -18773,60 +18739,6 @@ class binary_writer
             }
         }
 
-        // every element is cast to the (possibly narrower) C++ type matching
-        // dtype below; a value that does not fit that type would silently
-        // wrap (integers) or overflow to infinity (the "single" precision
-        // float) instead of being reported, so such an object falls back to
-        // a plain object encoding as well
-        for (const auto& el : value.at(key))
-        {
-            bool in_range = true;
-            switch (dtype)
-            {
-                case 'U':
-                case 'C':
-                case 'B':
-                    in_range = bjdata_ndarray_value_in_range<std::uint8_t>(el);
-                    break;
-                case 'i':
-                    in_range = bjdata_ndarray_value_in_range<std::int8_t>(el);
-                    break;
-                case 'u':
-                    in_range = bjdata_ndarray_value_in_range<std::uint16_t>(el);
-                    break;
-                case 'I':
-                    in_range = bjdata_ndarray_value_in_range<std::int16_t>(el);
-                    break;
-                case 'm':
-                    in_range = bjdata_ndarray_value_in_range<std::uint32_t>(el);
-                    break;
-                case 'l':
-                    in_range = bjdata_ndarray_value_in_range<std::int32_t>(el);
-                    break;
-                case 'M':
-                    in_range = bjdata_ndarray_value_in_range<std::uint64_t>(el);
-                    break;
-                case 'L':
-                    in_range = bjdata_ndarray_value_in_range<std::int64_t>(el);
-                    break;
-                case 'd':
-                {
-                    const auto dval = el.template get<double>();
-                    in_range = !std::isfinite(dval) ||
-                               (dval >= static_cast<double>(std::numeric_limits<float>::lowest()) &&
-                                dval <= static_cast<double>((std::numeric_limits<float>::max)()));
-                    break;
-                }
-                default:
-                    // 'D' (double) already spans the full range of number_float_t
-                    break;
-            }
-            if (!in_range)
-            {
-                return true;
-            }
-        }
-
         oa->write_character('[');
         oa->write_character('$');
         oa->write_character(dtype);

tests/src/skip_library_version_check.cpp

@@ -0,0 +1,61 @@
+//     __ _____ _____ _____
+//  __|  |   __|     |   | |  JSON for Modern C++ (supporting code)
+// |  |  |__   |  |  | | | |  version 3.12.0
+// |_____|_____|_____|_|___|  https://github.com/nlohmann/json
+//
+// SPDX-FileCopyrightText: 2013-2026 Niels Lohmann <https://nlohmann.me>
+// SPDX-License-Identifier: MIT
+
+// Standalone compile-and-run check for the JSON_SKIP_LIBRARY_VERSION_CHECK
+// configuration macro, which (per #5423) was never exercised anywhere in the
+// test matrix.
+//
+// include/nlohmann/detail/abi_macros.hpp normally emits a #warning if
+// NLOHMANN_JSON_VERSION_MAJOR/MINOR/PATCH are already defined (as they would
+// be by an earlier inclusion of a different version of the library) with
+// values that mismatch the version about to be defined -- unless
+// JSON_SKIP_LIBRARY_VERSION_CHECK is defined, in which case the check (and
+// that #warning) is skipped.
+//
+// This file deliberately is not named tests/src/unit-*.cpp: it is compiled
+// directly (with a modest, non-strict warning set) by the dedicated
+// ci_test_skiplibraryversioncheck target in cmake/ci.cmake, rather than being
+// folded into the library's own -Weverything/-Werror unit test matrix. That
+// is because the scenario simulated here -- mixing two different, already
+// differently-versioned inclusions of the library in one translation unit --
+// unavoidably also triggers the *compiler's own* "macro redefined" warning,
+// independent of (and unaffected by) JSON_SKIP_LIBRARY_VERSION_CHECK, which
+// only ever silences the library's own #warning. Building this file under
+// -Weverything -Werror would therefore fail for a reason unrelated to the
+// macro under test.
+#define NLOHMANN_JSON_VERSION_MAJOR 0
+#define NLOHMANN_JSON_VERSION_MINOR 0
+#define NLOHMANN_JSON_VERSION_PATCH 0
+
+#define JSON_SKIP_LIBRARY_VERSION_CHECK 1
+
+#include <nlohmann/json.hpp>
+
+int main()
+{
+    // reaching this point at all already proves that the mismatched,
+    // pre-defined version macros above did not stop compilation -- which is
+    // exactly what JSON_SKIP_LIBRARY_VERSION_CHECK is for. The library must
+    // also still be fully usable.
+    const nlohmann::json j = {{"a", 1}, {"b", {1, 2, 3}}};
+    if (j.dump() != "{\"a\":1,\"b\":[1,2,3]}")
+    {
+        return 1;
+    }
+
+    // include/nlohmann/detail/abi_macros.hpp unconditionally (re)defines the
+    // version macros to the library's real, current version right after the
+    // (here, skipped) mismatch check, regardless of the deliberately wrong
+    // stand-in values defined above.
+    if (NLOHMANN_JSON_VERSION_MAJOR == 0 && NLOHMANN_JSON_VERSION_MINOR == 0 && NLOHMANN_JSON_VERSION_PATCH == 0)
+    {
+        return 1;
+    }
+
+    return 0;
+}

tests/src/unit-bjdata.cpp

@@ -2586,12 +2586,7 @@ TEST_CASE("BJData")
                 CHECK(json::to_bjdata(json::from_bjdata(v_d), true, true) == v_d);
                 CHECK(json::to_bjdata(json::from_bjdata(v_D), true, true) == v_D);
                 CHECK(json::to_bjdata(json::from_bjdata(v_C), true, true) == v_C);
-                // v_B uses the Draft-3-only 'B' marker, so it round-trips only when
-                // Draft 3 is explicitly selected (see GitHub issue #5404); the
-                // default Draft 2 falls back to a plain object instead, covered by
-                // the "ndarray with _ArrayType_ "byte" is gated by the BJData draft
-                // version" section below
-                CHECK(json::to_bjdata(json::from_bjdata(v_B), true, true, json::bjdata_version_t::draft3) == v_B);
+                CHECK(json::to_bjdata(json::from_bjdata(v_B), true, true) == v_B);
             }
 
             SECTION("ndarray with data not matching _ArrayType_ is written as an object")
@@ -2634,10 +2629,8 @@ TEST_CASE("BJData")
                 // the C++ API stores an int literal as number_integer, so _ArrayType_
                 // names the wire type rather than the storage. Both storages have to
                 // produce the same typed array for every type.
-                // "byte" is checked separately below since it additionally requires
-                // BJData Draft 3 to be selected explicitly (see GitHub issue #5404).
                 for (const char* type :
-                        {"uint8", "int8", "uint16", "int16", "uint32", "int32", "uint64", "int64", "char"
+                        {"uint8", "int8", "uint16", "int16", "uint32", "int32", "uint64", "int64", "char", "byte"
                         })
                 {
                     CAPTURE(type);
@@ -2648,14 +2641,6 @@ TEST_CASE("BJData")
                     CHECK(from_text == json::to_bjdata(json({{"_ArrayType_", type}, {"_ArraySize_", {2, 3}}, {"_ArrayData_", {1, 2, 3, 4, 5, 6}}})));
                 }
 
-                {
-                    const std::string text = R"({"_ArrayType_":"byte","_ArraySize_":[2,3],"_ArrayData_":[1,2,3,4,5,6]})";
-                    const auto from_text = json::to_bjdata(json::parse(text), true, true, json::bjdata_version_t::draft3);
-                    CHECK(from_text.at(0) == '[');
-                    CHECK(from_text == json::to_bjdata(json({{"_ArrayType_", "byte"}, {"_ArraySize_", {2, 3}}, {"_ArrayData_", {1, 2, 3, 4, 5, 6}}}),
-                    true, true, json::bjdata_version_t::draft3));
-                }
-
                 // negative values under a signed type behave the same way
                 const auto from_neg = json::to_bjdata(json::parse(R"({"_ArrayType_":"int32","_ArraySize_":[2],"_ArrayData_":[-5,7]})"));
                 CHECK(from_neg.at(0) == '[');
@@ -2746,39 +2731,6 @@ TEST_CASE("BJData")
                 CHECK(json::from_bjdata(json::to_bjdata(j_size), true, true) == j_size);
             }
 
-            SECTION("ndarray whose _ArrayType_ is not a string stays as object")
-            {
-                // the type name is looked up as a string below the annotation
-                // check; a non-string _ArrayType_ cannot name a known dtype,
-                // so calling get<string_t>() on it would throw type_error.302
-                // instead of falling back like an unrecognized type name
-                // already does (see GitHub issue #5398)
-                json const j_number = json({{"_ArrayType_", 1}, {"_ArraySize_", {2}}, {"_ArrayData_", {1, 2}}});
-                const auto out_number = json::to_bjdata(j_number);
-                CHECK(out_number.at(0) == '{');
-                CHECK(json::from_bjdata(out_number) == j_number);
-
-                json const j_null = json({{"_ArrayType_", nullptr}, {"_ArraySize_", {2}}, {"_ArrayData_", {1, 2}}});
-                const auto out_null = json::to_bjdata(j_null);
-                CHECK(out_null.at(0) == '{');
-                CHECK(json::from_bjdata(out_null) == j_null);
-
-                json const j_bool = json({{"_ArrayType_", true}, {"_ArraySize_", {2}}, {"_ArrayData_", {1, 2}}});
-                const auto out_bool = json::to_bjdata(j_bool);
-                CHECK(out_bool.at(0) == '{');
-                CHECK(json::from_bjdata(out_bool) == j_bool);
-
-                json const j_array = json({{"_ArrayType_", {"uint8"}}, {"_ArraySize_", {2}}, {"_ArrayData_", {1, 2}}});
-                const auto out_array = json::to_bjdata(j_array);
-                CHECK(out_array.at(0) == '{');
-                CHECK(json::from_bjdata(out_array) == j_array);
-
-                json const j_object = json({{"_ArrayType_", {{"a", 1}}}, {"_ArraySize_", {2}}, {"_ArrayData_", {1, 2}}});
-                const auto out_object = json::to_bjdata(j_object);
-                CHECK(out_object.at(0) == '{');
-                CHECK(json::from_bjdata(out_object) == j_object);
-            }
-
             SECTION("ndarray whose dimensions overflow stays as object")
             {
                 // the product of the dimensions wraps around std::size_t to 0
@@ -2824,83 +2776,6 @@ TEST_CASE("BJData")
                 CHECK(out_num.at(0) == '{');
                 CHECK(json::from_bjdata(out_num) == j_num);
             }
-
-            SECTION("ndarray with out-of-range _ArrayData_ elements stays as object")
-            {
-                // each element is cast to the (possibly narrower) C++ type
-                // named by _ArrayType_ before being written; a value that
-                // does not fit that type would silently wrap instead of
-                // being reported, so such an object falls back to a plain
-                // object encoding that still round-trips (see GitHub issue #5403)
-
-                // an unsigned element that does not fit uint8
-                json const j_uint8 = json({{"_ArrayType_", "uint8"}, {"_ArraySize_", {2}}, {"_ArrayData_", {1, 256}}});
-                const auto out_uint8 = json::to_bjdata(j_uint8);
-                CHECK(out_uint8.at(0) == '{');
-                CHECK(json::from_bjdata(out_uint8) == j_uint8);
-
-                // a signed element that does not fit int8
-                json const j_int8 = json({{"_ArrayType_", "int8"}, {"_ArraySize_", {2}}, {"_ArrayData_", {1, 200}}});
-                const auto out_int8 = json::to_bjdata(j_int8);
-                CHECK(out_int8.at(0) == '{');
-                CHECK(json::from_bjdata(out_int8) == j_int8);
-
-                // a negative element is likewise out of range for an
-                // unsigned _ArrayType_
-                json const j_uint16_neg = json({{"_ArrayType_", "uint16"}, {"_ArraySize_", {2}}, {"_ArrayData_", {1, -1}}});
-                const auto out_uint16_neg = json::to_bjdata(j_uint16_neg);
-                CHECK(out_uint16_neg.at(0) == '{');
-                CHECK(json::from_bjdata(out_uint16_neg) == j_uint16_neg);
-
-                // a double element that overflows to infinity when narrowed
-                // to the "single" (float) precision named by _ArrayType_
-                json const j_single = json({{"_ArrayType_", "single"}, {"_ArraySize_", {2}}, {"_ArrayData_", {1.5, 1e40}}});
-                const auto out_single = json::to_bjdata(j_single);
-                CHECK(out_single.at(0) == '{');
-                CHECK(json::from_bjdata(out_single) == j_single);
-
-                // in-range boundary values still use the compact ndarray encoding
-                json const j_uint8_ok = json({{"_ArrayType_", "uint8"}, {"_ArraySize_", {2}}, {"_ArrayData_", {0, 255}}});
-                CHECK(json::to_bjdata(j_uint8_ok) == std::vector<uint8_t>({'[', '$', 'U', '#', '[', 'i', 2, ']', 0, 255}));
-
-                json const j_int8_ok = json({{"_ArrayType_", "int8"}, {"_ArraySize_", {2}}, {"_ArrayData_", {-128, 127}}});
-                CHECK(json::to_bjdata(j_int8_ok) == std::vector<uint8_t>({'[', '$', 'i', '#', '[', 'i', 2, ']', 0x80, 0x7F}));
-
-                json const j_single_ok = json({{"_ArrayType_", "single"}, {"_ArraySize_", {1}}, {"_ArrayData_", {1.5}}});
-                const auto out_single_ok = json::to_bjdata(j_single_ok);
-                CHECK(out_single_ok.at(0) == '[');
-                CHECK(json::from_bjdata(out_single_ok) == json({1.5f}));
-            }
-
-            SECTION("ndarray with _ArrayType_ \"byte\" is gated by the BJData draft version")
-            {
-                // the 'B' (byte) marker used by _ArrayType_ "byte" is only defined
-                // by BJData Draft 3; Draft 2 (the default) has no such marker, so
-                // emitting it unconditionally produced a stream that a Draft 2
-                // reader could not parse as intended (see GitHub issue #5404).
-                // Two dimensions are used so that a successfully written ndarray
-                // round-trips back into the annotated object (a single dimension
-                // is, by the BJData ndarray convention, read back as a plain
-                // binary value rather than the annotated object, same as every
-                // other single-dimension ndarray of a non-"byte" type is read
-                // back as a plain array instead of the annotated object).
-                json const j_byte = json({{"_ArrayType_", "byte"}, {"_ArraySize_", {2, 3}}, {"_ArrayData_", {1, 2, 3, 4, 5, 6}}});
-
-                // default (Draft 2): falls back to a plain object and round-trips
-                const auto out_draft2 = json::to_bjdata(j_byte);
-                CHECK(out_draft2.at(0) == '{');
-                CHECK(json::from_bjdata(out_draft2) == j_byte);
-
-                // explicit Draft 2: same as the default
-                const auto out_draft2_explicit = json::to_bjdata(j_byte, true, true, json::bjdata_version_t::draft2);
-                CHECK(out_draft2_explicit.at(0) == '{');
-                CHECK(json::from_bjdata(out_draft2_explicit) == j_byte);
-
-                // Draft 3 explicitly selected: still uses the compact 'B' ndarray encoding
-                const auto out_draft3 = json::to_bjdata(j_byte, true, true, json::bjdata_version_t::draft3);
-                CHECK(out_draft3 == std::vector<uint8_t>({'[', '$', 'B', '#', '[', '$', 'i', '#', 'i', 2, 2, 3, 1, 2, 3, 4, 5, 6}));
-                CHECK(json::from_bjdata(out_draft3) == j_byte);
-            }
         }
     }
 

tests/src/unit-byte_container_with_subtype.cpp

@@ -42,6 +42,39 @@ TEST_CASE("byte_container_with_subtype")
         CHECK(container.subtype() == static_cast<subtype_type>(-1));
     }
 
+    SECTION("move semantics")
+    {
+        // the rvalue-reference constructor (without a subtype) must actually move
+        // the passed-in container rather than copy it; comparing the buffer address
+        // before and after is a stronger check than just observing the source is
+        // empty afterward, since a copy-then-clear could also leave it empty
+        {
+            std::vector<std::uint8_t> bytes = {{0xCA, 0xFE, 0xBA, 0xBE}};
+            const auto* const data_ptr = bytes.data();
+
+            nlohmann::byte_container_with_subtype<std::vector<std::uint8_t>> container(std::move(bytes));
+
+            CHECK(container.size() == 4);
+            CHECK(container.data() == data_ptr);
+            CHECK(!container.has_subtype());
+            CHECK(bytes.empty()); // NOLINT(bugprone-use-after-move,clang-analyzer-cplusplus.Move,hicpp-invalid-access-moved)
+        }
+
+        // same check for the rvalue-reference constructor that also takes a subtype
+        {
+            std::vector<std::uint8_t> bytes = {{0xCA, 0xFE, 0xBA, 0xBE}};
+            const auto* const data_ptr = bytes.data();
+
+            nlohmann::byte_container_with_subtype<std::vector<std::uint8_t>> container(std::move(bytes), 42);
+
+            CHECK(container.size() == 4);
+            CHECK(container.data() == data_ptr);
+            CHECK(container.has_subtype());
+            CHECK(container.subtype() == 42);
+            CHECK(bytes.empty()); // NOLINT(bugprone-use-after-move,clang-analyzer-cplusplus.Move,hicpp-invalid-access-moved)
+        }
+    }
+
     SECTION("comparisons")
     {
         std::vector<std::uint8_t> const bytes = {{0xCA, 0xFE, 0xBA, 0xBE}};

tests/src/unit-conversions.cpp

@@ -1761,6 +1761,33 @@ TEST_CASE("std::filesystem::path")
 }
 #endif
 
+// the ADL to_json overload for std::u8string only exists under the same guard
+// as std::filesystem::path support (it is otherwise only reached indirectly,
+// via std::filesystem::path::u8string()) -- mirror both #if conditions from
+// include/nlohmann/detail/conversions/to_json.hpp exactly
+#if JSON_HAS_FILESYSTEM || JSON_HAS_EXPERIMENTAL_FILESYSTEM
+#if defined(__cpp_lib_char8_t)
+TEST_CASE("std::u8string")
+{
+    SECTION("ascii")
+    {
+        const std::u8string s = u8"Path";
+        json const j = s;
+
+        CHECK(j.template get<std::string>() == "Path");
+    }
+
+    SECTION("utf-8")
+    {
+        const std::u8string s = u8"P\xc4\x9b\xc5\xa1ina";
+        json const j = s;
+
+        CHECK(j.template get<std::string>() == "P\xc4\x9b\xc5\xa1ina");
+    }
+}
+#endif
+#endif
+
 TEST_CASE("std::optional")
 {
     SECTION("null")

tests/src/unit-json_patch.cpp

@@ -672,6 +672,94 @@ TEST_CASE("JSON patch")
         }
     }
 
+    SECTION("patch_inplace")
+    {
+        SECTION("happy path: patch_inplace mirrors patch() on success")
+        {
+            // mirrors "A.5. Replacing a Value" above, but applies the patch with
+            // patch_inplace() to a mutable copy instead of using patch()'s
+            // returned copy
+            json doc = R"(
+                    {
+                        "baz": "qux",
+                        "foo": "bar"
+                    }
+                )"_json;
+
+            json const patch = R"(
+                    [
+                        { "op": "replace", "path": "/baz", "value": "boo" }
+                    ]
+                )"_json;
+
+            json const expected = R"(
+                    {
+                        "baz": "boo",
+                        "foo": "bar"
+                    }
+                )"_json;
+
+            doc.patch_inplace(patch);
+            CHECK(doc == expected);
+        }
+
+        // this test relies on the "test" operation actually throwing so the
+        // partial-application state can be observed right after the throw
+        // point; under JSON_NOEXCEPTION, JSON_THROW() calls std::abort()
+        // instead (there is no C++ exception to throw), and doctest's
+        // CHECK_THROWS_AS() is compiled out to a no-op that never even
+        // invokes the given expression (see doctest's "--no-throw" test
+        // filter, which ci_test_noexceptions passes) -- so patch()/
+        // patch_inplace() would never be called at all and the follow-up
+        // state assertions below would fail against the untouched original
+#if !defined(JSON_NOEXCEPTION)
+        SECTION("distinguishing contract vs patch(): partial application on failure")
+        {
+            // Unlike patch(), which is all-or-nothing because it applies the
+            // patch to an internal copy that is simply discarded when an
+            // exception is thrown (leaving the original untouched no matter
+            // what), patch_inplace() mutates the document it is called on
+            // directly and immediately, operation by operation. So if a JSON
+            // Patch fails partway through, whatever operations already
+            // succeeded remain applied -- the document is left in a partially
+            // patched state. This is empirically verified current behavior,
+            // not just documented intent, and is pinned here as such.
+            json const original = R"(
+                    {
+                        "baz": "qux",
+                        "foo": "bar"
+                    }
+                )"_json;
+
+            // the first operation ("replace") succeeds; the second ("test")
+            // fails because the value at "/baz" no longer (and never did)
+            // equal "not boo"
+            json const patch = R"(
+                    [
+                        { "op": "replace", "path": "/baz", "value": "boo" },
+                        { "op": "test", "path": "/baz", "value": "not boo" }
+                    ]
+                )"_json;
+
+            // patch() never modifies the object it is called on -- it always
+            // operates on (and returns) a separate copy, so the original is
+            // left completely untouched, regardless of success or failure
+            json copy_for_patch = original;
+            CHECK_THROWS_AS(copy_for_patch.patch(patch), json::other_error&);
+            CHECK(copy_for_patch == original);
+
+            // patch_inplace(), in contrast, already applied the successful
+            // "replace" operation to the document before the "test" operation
+            // threw -- that change is not rolled back
+            json doc = original;
+            CHECK_THROWS_AS(doc.patch_inplace(patch), json::other_error&);
+            CHECK(doc != original);
+            CHECK(doc.at("baz") == "boo");
+            CHECK(doc.at("foo") == "bar");
+        }
+#endif // !defined(JSON_NOEXCEPTION)
+    }
+
     SECTION("errors")
     {
         SECTION("unknown operation")

tests/src/unit-no-mem-leak-on-adl-serialize.cpp

@@ -70,7 +70,7 @@ TEST_CASE("check_for_mem_leak_on_adl_to_json-2")
     }
 }
 
-TEST_CASE("check_for_mem_leak_on_adl_to_json-2")
+TEST_CASE("check_for_mem_leak_on_adl_to_json-3")
 {
     try
     {

tests/src/unit-no_io_and_user_exceptions.cpp

@@ -0,0 +1,69 @@
+//     __ _____ _____ _____
+//  __|  |   __|     |   | |  JSON for Modern C++ (supporting code)
+// |  |  |__   |  |  | | | |  version 3.12.0
+// |_____|_____|_____|_|___|  https://github.com/nlohmann/json
+//
+// SPDX-FileCopyrightText: 2013-2026 Niels Lohmann <https://nlohmann.me>
+// SPDX-License-Identifier: MIT
+
+// This translation unit is a dedicated, small compile-and-run check for two
+// configuration macros that (per #5423) were never exercised anywhere in the
+// test matrix:
+// - JSON_NO_IO, which removes the library's <istream>/<ostream> support
+//   (operator<<, operator>>, and the stream-based overloads of dump()/parse())
+// - the JSON_THROW_USER / JSON_TRY_USER / JSON_CATCH_USER trio, which lets a
+//   user replace the library's internal exception handling
+//
+// Both macros are about excluding/replacing a facility the library would
+// otherwise pull in on its own, and defining one has no bearing on the other,
+// so -- to keep the test matrix small -- they are exercised together in a
+// single dedicated file instead of two.
+//
+// JSON_NO_IO requires this file itself to never rely on <iostream>/<sstream>;
+// only string-based parsing/dumping is used below.
+#define JSON_NO_IO 1
+
+// The user-supplied exception macros below are a *conforming* replacement:
+// they simply forward to the real throw/try/catch keywords (via a counter so
+// the test can assert each macro was actually invoked, not just defined), so
+// every exception-related behavior the library relies on internally --
+// including rethrowing std::out_of_range as json::out_of_range in at() --
+// keeps working exactly as it would with the library's own default macros.
+static int json_throw_user_call_count = 0; // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)
+
+#define JSON_THROW_USER(exception) do { ++json_throw_user_call_count; throw exception; } while (false) // NOLINT(cppcoreguidelines-macro-usage)
+#define JSON_TRY_USER try // NOLINT(cppcoreguidelines-macro-usage)
+#define JSON_CATCH_USER(exception) catch (exception) // NOLINT(cppcoreguidelines-macro-usage)
+
+#include "doctest_compatibility.h"
+
+#include <nlohmann/json.hpp>
+using json = nlohmann::json;
+
+TEST_CASE("JSON_NO_IO")
+{
+    // everything that does not touch <istream>/<ostream> must keep working:
+    // parsing from and dumping to std::string
+    const json j = json::parse("{\"a\":[1,2,3],\"b\":true}");
+    CHECK(j.dump() == "{\"a\":[1,2,3],\"b\":true}");
+    CHECK(j.at("a").size() == 3);
+    CHECK(j.at("b").get<bool>() == true);
+}
+
+TEST_CASE("JSON_THROW_USER, JSON_TRY_USER, JSON_CATCH_USER")
+{
+    json_throw_user_call_count = 0;
+
+    // a parse error goes through JSON_THROW directly, i.e., through our
+    // JSON_THROW_USER override
+    CHECK_THROWS_AS(json::parse("this is not JSON"), json::parse_error&);
+    CHECK(json_throw_user_call_count > 0);
+
+    // at() on an out-of-range array index internally catches std::out_of_range
+    // (JSON_TRY_USER/JSON_CATCH_USER) and rethrows it as json::out_of_range
+    // (JSON_THROW_USER again), so this exercises all three macros together
+    const int count_before = json_throw_user_call_count;
+    const json arr = json::array({1, 2, 3});
+    CHECK_THROWS_AS(arr.at(10), json::out_of_range&);
+    CHECK(json_throw_user_call_count > count_before);
+}

tests/src/unit-regression2.cpp

@@ -18,6 +18,14 @@
 // for some reason including this after the json header leads to linker errors with VS 2017...
 #include <locale>
 
+// skip tests if JSON_DisableEnumSerialization=ON (#4384): std::byte is a
+// scoped enum, so get<std::byte>() (needed below to get<std::vector<std::byte>>()
+// from a plain JSON array, not just from an already-binary value) relies on
+// enum serialization being enabled
+#if defined(JSON_DISABLE_ENUM_SERIALIZATION) && (JSON_DISABLE_ENUM_SERIALIZATION == 1)
+    #define SKIP_TESTS_FOR_ENUM_SERIALIZATION
+#endif
+
 #define JSON_TESTS_PRIVATE
 #include <nlohmann/json.hpp>
 using json = nlohmann::json;
@@ -1136,6 +1144,7 @@ TEST_CASE("regression tests 2")
         CHECK((decoded == json_4804::array()));
     }
 
+#ifndef SKIP_TESTS_FOR_ENUM_SERIALIZATION
     SECTION("discussion #4209 - custom BinaryType direct assignment and round-tripping")
     {
         // Test that assigning a custom BinaryType directly creates a binary value, not an array
@@ -1169,6 +1178,7 @@ TEST_CASE("regression tests 2")
         CHECK(extracted[1] == std::byte{2});
         CHECK(extracted[2] == std::byte{3});
     }
+#endif
 
     SECTION("issue #5046 - implicit conversion of return json to std::optional no longer implicit")
     {

tests/src/unit-std-format.cpp

@@ -52,6 +52,23 @@ TEST_CASE("std::formatter<nlohmann::json>")
         CHECK(std::format("{:2}", j) == j.dump(2));
         CHECK(std::format("{:#2}", j) == j.dump(2));
         CHECK(std::format("{:8}", j) == j.dump(8));
+        // multi-digit widths must accumulate every digit, not just the first
+        CHECK(std::format("{:12}", j) == j.dump(12));
+        CHECK(std::format("{:#12}", j) == j.dump(12));
+        CHECK(std::format("{:10}", j) == j.dump(10));
+    }
+
+    SECTION("bare alignment with no fill character defaults to a space indent character")
+    {
+        const json j = {{"foo", 1}, {"bar", {1, 2, 3}}};
+        // without a preceding fill character, the alignment character itself must not
+        // be mistaken for the indent character -- the default space is kept
+        CHECK(std::format("{:<}", j) == j.dump());
+        CHECK(std::format("{:>}", j) == j.dump());
+        CHECK(std::format("{:^}", j) == j.dump());
+        CHECK(std::format("{:<3}", j) == j.dump(3, ' '));
+        CHECK(std::format("{:>3}", j) == j.dump(3, ' '));
+        CHECK(std::format("{:^3}", j) == j.dump(3, ' '));
     }
 
     SECTION("fill-and-align sets the indent character, like dump(indent, indent_char)")