report result of delete operation after failed upload

The sanity check shouldn't replace the error message if there is already
one.

.github/ISSUE_TEMPLATE.md

@@ -1,37 +0,0 @@
-<!--
-NOTE: Not filling out the issue template needs a good reason, otherwise it may
-take a lot longer to find the problem! Please take the time to help us
-debugging the problem by collecting information, even if it seems irrelevant to
-you. Thanks!
-
-If you have a question, maybe the forum at https://discourse.restic.net is a
-better place.
--->
-
-## Output of `restic version`
-
-
-## How did you run restic exactly?
-
-<!--
-Include the complete command line and any environment variables you used to
-configure restic's backend access. Make sure to replace sensitive values!
--->
-
-
-## What backend/server/service did you use?
-
-
-## Expected behavior
-
-
-## Actual behavior
-
-
-## Steps to reproduce the behavior
-
-
-## Do you have any idea what may have caused this?
-
-
-## Do you have an idea how to solve the issue?

.github/ISSUE_TEMPLATE/Bug.md

@@ -0,0 +1,93 @@
+---
+name: Bug report
+about: Report a problem with restic to help us resolve it and improve
+---
+
+<!--
+
+Welcome! - We kindly ask that you:
+
+  1. Fill out the issue template below - not doing so needs a good reason.
+  2. Use the forum if you have a question rather than a bug or feature request.
+
+The forum is at: https://forum.restic.net
+
+NOTE: Not filling out the issue template needs a good reason, as otherwise it
+may take a lot longer to find the problem, not to mention it can take up a lot
+more time which can otherwise be spent on development. Please also take the
+time to help us debug the issue by collecting relevant information, even if
+it doesn't seem to be relevant to you. Thanks!
+
+The forum is a better place for questions about restic or general suggestions
+and topics, e.g. usage or documentation questions! This issue tracker is mainly
+for tracking bugs and feature requests directly relating to the development of
+the software itself, rather than the project.
+
+Thanks for understanding, and for contributing to the project!
+
+-->
+
+
+Output of `restic version`
+--------------------------
+
+
+How did you run restic exactly?
+-------------------------------
+
+<!--
+This section should include at least:
+
+ * The complete command line and any environment variables you used to
+   configure restic's backend access. Make sure to replace sensitive values!
+
+ * The output of the commands, what restic prints gives may give us much
+   information to diagnose the problem!
+-->
+
+What backend/server/service did you use to store the repository?
+----------------------------------------------------------------
+
+
+
+Expected behavior
+-----------------
+
+<!--
+Describe what you'd like restic to do differently.
+-->
+
+Actual behavior
+---------------
+
+<!--
+In this section, please try to concentrate on observations, so only describe
+what you observed directly.
+-->
+
+Steps to reproduce the behavior
+-------------------------------
+
+<!--
+The more time you spend describing an easy way to reproduce the behavior (if
+this is possible), the easier it is for the project developers to fix it!
+-->
+
+Do you have any idea what may have caused this?
+-----------------------------------------------
+
+
+
+Do you have an idea how to solve the issue?
+-------------------------------------------
+
+
+
+Did restic help you today? Did it make you happy in any way?
+------------------------------------------------------------
+
+<!--
+Answering this question is not required, but if you have anything positive to share, please do so here!
+Sometimes we get tired of reading bug reports all day and a little positive end note does wonders.
+Idea by Joey Hess, https://joeyh.name/blog/entry/two_holiday_stories/
+-->

.github/ISSUE_TEMPLATE/Feature.md

@@ -0,0 +1,57 @@
+---
+name: Feature request
+about: Suggest a new feature or enhancement for restic
+---
+
+<!--
+
+Welcome! - We kindly ask that you:
+
+  1. Fill out the issue template below - not doing so needs a good reason.
+  2. Use the forum if you have a question rather than a bug or feature request.
+
+The forum is at: https://forum.restic.net
+
+The forum is a better place for questions about restic or general suggestions
+and topics, e.g. usage or documentation questions! This issue tracker is mainly
+for tracking bugs and feature requests directly relating to the development of
+the software itself, rather than the project.
+
+Thanks for understanding, and for contributing to the project!
+
+-->
+
+
+Output of `restic version`
+--------------------------
+
+<!--
+Please add the version of restic you're currently using here, this helps us
+later to see what has changed in restic when we revisit this issue after some
+time.
+-->
+
+What should restic do differently? Which functionality do you think we should add?
+----------------------------------------------------------------------------------
+
+<!--
+Please describe the feature you'd like us to add here.
+-->
+
+
+What are you trying to do? What problem would this solve?
+---------------------------------------------------------
+
+<!--
+This section should contain a brief description what you're trying to do, which
+would be possible after implementing the new feature.
+-->
+
+Did restic help you today? Did it make you happy in any way?
+------------------------------------------------------------
+
+<!--
+Answering this question is not required, but if you have anything positive to share, please do so here!
+Sometimes we get tired of reading bug reports all day and a little positive end note does wonders.
+Idea by Joey Hess, https://joeyh.name/blog/entry/two_holiday_stories/
+-->

.github/ISSUE_TEMPLATE/config.yml

@@ -0,0 +1,4 @@
+contact_links:
+  - name: restic forum
+    url: https://forum.restic.net
+    about: Please ask questions about using restic here, do not open an issue for questions.

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,40 @@
+
+
+<!--
+Thank you very much for contributing code or documentation to restic! Please
+fill out the following questions to make it easier for us to review your
+changes.
+
+You do not need to check all the boxes below all at once, feel free to take
+your time and add more commits. If you're done and ready for review, please
+check the last box.
+-->
+
+What does this PR change? What problem does it solve?
+-----------------------------------------------------
+
+<!--
+Describe the changes and their purpose here, as detailed as needed.
+-->
+
+Was the change discussed in an issue or in the forum before?
+------------------------------------------------------------
+
+<!--
+Link issues and relevant forum posts here.
+
+If this PR resolves an issue on GitHub, use "Closes #1234" so that the issue
+is closed automatically when this PR is merged.
+-->
+
+Checklist
+---------
+
+- [ ] I have read the [Contribution Guidelines](https://github.com/restic/restic/blob/master/CONTRIBUTING.md#providing-patches)
+- [ ] I have enabled [maintainer edits for this PR](https://help.github.com/en/github/collaborating-with-issues-and-pull-requests/allowing-changes-to-a-pull-request-branch-created-from-a-fork)
+- [ ] I have added tests for all changes in this PR
+- [ ] I have added documentation for the changes (in the manual)
+- [ ] There's a new file in `changelog/unreleased/` that describes the changes for our users (template [here](https://github.com/restic/restic/blob/master/changelog/TEMPLATE))
+- [ ] I have run `gofmt` on the code in all commits
+- [ ] All commit messages are formatted in the same style as [the other commits in the repo](https://github.com/restic/restic/blob/master/CONTRIBUTING.md#git-commits)
+- [ ] I'm done, this Pull Request is ready for review

.github/workflows/tests.yml

@@ -0,0 +1,258 @@
+name: test
+on:
+  # run tests on push to master, but not when other branches are pushed to
+  push:
+    branches:
+      - master
+
+  # run tests for all pull requests
+  pull_request:
+
+jobs:
+  test:
+    strategy:
+      matrix:
+        # list of jobs to run:
+        include:
+          - job_name: Windows
+            go: 1.15.x
+            os: windows-latest
+
+          - job_name: macOS
+            go: 1.15.x
+            os: macOS-latest
+            test_fuse: false
+
+          - job_name: Linux
+            go: 1.15.x
+            os: ubuntu-latest
+            test_cloud_backends: true
+            test_fuse: true
+            check_changelog: true
+
+          - job_name: Linux
+            go: 1.14.x
+            os: ubuntu-latest
+            test_fuse: true
+
+          - job_name: Linux
+            go: 1.13.x
+            os: ubuntu-latest
+            test_fuse: true
+
+    name: ${{ matrix.job_name }} Go ${{ matrix.go }}
+    runs-on: ${{ matrix.os }}
+
+    env:
+      GOPROXY: https://proxy.golang.org
+
+    steps:
+      - name: Set up Go ${{ matrix.go }}
+        uses: actions/setup-go@v2
+        with:
+          go-version: ${{ matrix.go }}
+
+      - name: Get programs (Linux/macOS)
+        run: |
+          echo "build Go tools"
+          go get github.com/restic/rest-server/...
+
+          echo "install minio server"
+          mkdir $HOME/bin
+          if [ "$RUNNER_OS" == "macOS" ]; then
+            wget --no-verbose -O $HOME/bin/minio https://dl.minio.io/server/minio/release/darwin-amd64/minio
+          else
+            wget --no-verbose -O $HOME/bin/minio https://dl.minio.io/server/minio/release/linux-amd64/minio
+          fi
+          chmod 755 $HOME/bin/minio
+
+          echo "install rclone"
+          if [ "$RUNNER_OS" == "macOS" ]; then
+            wget --no-verbose -O rclone.zip https://downloads.rclone.org/rclone-current-osx-amd64.zip
+          else
+            wget --no-verbose -O rclone.zip https://downloads.rclone.org/rclone-current-linux-amd64.zip
+          fi
+          unzip rclone.zip
+          cp rclone*/rclone $HOME/bin
+          chmod 755 $HOME/bin/rclone
+          rm -rf rclone*
+
+          # add $HOME/bin to path ($GOBIN was already added to the path by setup-go@v2)
+          echo $HOME/bin >> $GITHUB_PATH
+        if: matrix.os == 'ubuntu-latest' || matrix.os == 'macOS-latest'
+
+      - name: Get programs (Windows)
+        shell: powershell
+        run: |
+          $ProgressPreference = 'SilentlyContinue'
+
+          echo "build Go tools"
+          go get github.com/restic/rest-server/...
+
+          echo "install minio server"
+          mkdir $Env:USERPROFILE/bin
+          Invoke-WebRequest https://dl.minio.io/server/minio/release/windows-amd64/minio.exe -OutFile $Env:USERPROFILE/bin/minio.exe
+
+          echo "install rclone"
+          Invoke-WebRequest https://downloads.rclone.org/rclone-current-windows-amd64.zip -OutFile rclone.zip
+
+          unzip rclone.zip
+          copy rclone*/rclone.exe $Env:USERPROFILE/bin
+
+          # add $USERPROFILE/bin to path ($GOBIN was already added to the path by setup-go@v2)
+          echo $Env:USERPROFILE\bin >> $Env:GITHUB_PATH
+
+          echo "install tar"
+          cd $env:USERPROFILE
+          mkdir tar
+          cd tar
+
+          # install exactly these versions of tar and the libraries, other combinations might not work!
+
+          Invoke-WebRequest https://github.com/restic/test-assets/raw/master/tar-1.13-1-bin.zip -OutFile tar.zip
+          unzip tar.zip
+          Invoke-WebRequest https://github.com/restic/test-assets/raw/master/libintl-0.11.5-2-bin.zip -OutFile libintl.zip
+          unzip libintl.zip
+          Invoke-WebRequest https://github.com/restic/test-assets/raw/master/libiconv-1.8-1-bin.zip -OutFile libiconv.zip
+          unzip libiconv.zip
+
+          # add $USERPROFILE/tar/bin to path
+          echo $Env:USERPROFILE\tar\bin >> $Env:GITHUB_PATH
+        if: matrix.os == 'windows-latest'
+
+      - name: Check out code
+        uses: actions/checkout@v2
+
+      - name: Build with build.go
+        run: |
+          go run build.go
+
+      - name: Run local Tests
+        env:
+          RESTIC_TEST_FUSE: ${{ matrix.test_fuse }}
+        run: |
+          go test -cover ./...
+
+      - name: Test cloud backends
+        env:
+          RESTIC_TEST_S3_KEY: ${{ secrets.RESTIC_TEST_S3_KEY }}
+          RESTIC_TEST_S3_SECRET: ${{ secrets.RESTIC_TEST_S3_SECRET }}
+          RESTIC_TEST_S3_REPOSITORY: ${{ secrets.RESTIC_TEST_S3_REPOSITORY }}
+          RESTIC_TEST_AZURE_ACCOUNT_NAME: ${{ secrets.RESTIC_TEST_AZURE_ACCOUNT_NAME }}
+          RESTIC_TEST_AZURE_ACCOUNT_KEY: ${{ secrets.RESTIC_TEST_AZURE_ACCOUNT_KEY }}
+          RESTIC_TEST_AZURE_REPOSITORY: ${{ secrets.RESTIC_TEST_AZURE_REPOSITORY }}
+          RESTIC_TEST_B2_ACCOUNT_ID: ${{ secrets.RESTIC_TEST_B2_ACCOUNT_ID }}
+          RESTIC_TEST_B2_ACCOUNT_KEY: ${{ secrets.RESTIC_TEST_B2_ACCOUNT_KEY }}
+          RESTIC_TEST_B2_REPOSITORY: ${{ secrets.RESTIC_TEST_B2_REPOSITORY }}
+          RESTIC_TEST_GS_REPOSITORY: ${{ secrets.RESTIC_TEST_GS_REPOSITORY }}
+          RESTIC_TEST_GS_PROJECT_ID: ${{ secrets.RESTIC_TEST_GS_PROJECT_ID }}
+          GOOGLE_PROJECT_ID: ${{ secrets.RESTIC_TEST_GS_PROJECT_ID }}
+          RESTIC_TEST_GS_APPLICATION_CREDENTIALS_B64: ${{ secrets.RESTIC_TEST_GS_APPLICATION_CREDENTIALS_B64 }}
+          RESTIC_TEST_OS_AUTH_URL: ${{ secrets.RESTIC_TEST_OS_AUTH_URL }}
+          RESTIC_TEST_OS_TENANT_NAME: ${{ secrets.RESTIC_TEST_OS_TENANT_NAME }}
+          RESTIC_TEST_OS_USERNAME: ${{ secrets.RESTIC_TEST_OS_USERNAME }}
+          RESTIC_TEST_OS_PASSWORD: ${{ secrets.RESTIC_TEST_OS_PASSWORD }}
+          RESTIC_TEST_OS_REGION_NAME: ${{ secrets.RESTIC_TEST_OS_REGION_NAME }}
+          RESTIC_TEST_SWIFT: ${{ secrets.RESTIC_TEST_SWIFT }}
+          # fail if any of the following tests cannot be run
+          RESTIC_TEST_DISALLOW_SKIP: "restic/backend/rest.TestBackendREST,\
+            restic/backend/sftp.TestBackendSFTP,\
+            restic/backend/s3.TestBackendMinio,\
+            restic/backend/rclone.TestBackendRclone,\
+            restic/backend/s3.TestBackendS3,\
+            restic/backend/swift.TestBackendSwift,\
+            restic/backend/b2.TestBackendB2,\
+            restic/backend/gs.TestBackendGS,\
+            restic/backend/azure.TestBackendAzure"
+        run: |
+          # prepare credentials for Google Cloud Storage tests in a temp file
+          export GOOGLE_APPLICATION_CREDENTIALS=$(mktemp --tmpdir restic-gcs-auth-XXXXXXX)
+          echo $RESTIC_TEST_GS_APPLICATION_CREDENTIALS_B64 | base64 -d > $GOOGLE_APPLICATION_CREDENTIALS
+          go test -cover -parallel 4 ./internal/backend/...
+
+        # only run cloud backend tests for pull requests from and pushes to our
+        # own repo, otherwise the secrets are not available
+        if: (github.event_name == 'push' || github.event.pull_request.head.repo.full_name == github.repository) && matrix.test_cloud_backends
+
+      - name: Check changelog files with calens
+        run: |
+          echo "install calens"
+          go get github.com/restic/calens
+
+          echo "check changelog files"
+          calens
+        if: matrix.check_changelog
+
+  cross_compile:
+    strategy:
+
+      # ATTENTION: the list of architectures must be in sync with helpers/build-release-binaries/main.go!
+      matrix:
+        # run cross-compile in two batches parallel so the overall tests run faster
+        targets:
+          - "linux/386 linux/amd64 linux/arm linux/arm64 linux/ppc64le linux/mips linux/mipsle linux/mips64 linux/mips64le \
+            openbsd/386 openbsd/amd64"
+
+          - "freebsd/386 freebsd/amd64 freebsd/arm \
+            aix/ppc64 \
+            darwin/amd64 \
+            netbsd/386 netbsd/amd64 \
+            windows/386 windows/amd64 \
+            solaris/amd64"
+
+    env:
+      go: 1.15.x
+      GOPROXY: https://proxy.golang.org
+
+    runs-on: ubuntu-latest
+
+    name: Cross Compile for ${{ matrix.targets }}
+
+    steps:
+      - name: Set up Go ${{ env.go }}
+        uses: actions/setup-go@v2
+        with:
+          go-version: ${{ env.go }}
+
+      - name: Check out code
+        uses: actions/checkout@v2
+
+      - name: Install gox
+        run: |
+          go get github.com/mitchellh/gox
+
+      - name: Cross-compile with gox for ${{ matrix.targets }}
+        env:
+          GOFLAGS: "-trimpath"
+          GOX_ARCHS: "${{ matrix.targets }}"
+        run: |
+          mkdir build-output
+          gox -parallel 2 -verbose -osarch "$GOX_ARCHS" -output "build-output/{{.Dir}}_{{.OS}}_{{.Arch}}" ./cmd/restic
+          gox -parallel 2 -verbose -osarch "$GOX_ARCHS" -tags debug -output "build-output/{{.Dir}}_{{.OS}}_{{.Arch}}_debug" ./cmd/restic
+
+  lint:
+    name: lint
+    runs-on: ubuntu-latest
+    steps:
+      - name: Check out code
+        uses: actions/checkout@v2
+
+      - name: golangci-lint
+        uses: golangci/golangci-lint-action@v2
+        with:
+          # Required: the version of golangci-lint is required and must be specified without patch version: we always use the latest patch version.
+          version: v1.36
+          # Optional: show only new issues if it's a pull request. The default value is `false`.
+          only-new-issues: true
+          args: --verbose --timeout 5m
+
+        # only run golangci-lint for pull requests, otherwise ALL hints get
+        # reported. We need to slowly address all issues until we can enable
+        # linting the master branch :)
+        if: github.event_name == 'pull_request'
+
+      - name: Check go.mod/go.sum
+        run: |
+          echo "check if go.mod and go.sum are up to date"
+          go mod tidy
+          git diff --exit-code go.mod go.sum

.gitignore

@@ -1,3 +1,3 @@
 /restic
 /.vagrant
-/doc/_build
+/.vscode

.golangci.yml

@@ -0,0 +1,57 @@
+# This is the configuration for golangci-lint for the restic project.
+#
+# A sample config with all settings is here:
+# https://github.com/golangci/golangci-lint/blob/master/.golangci.example.yml
+
+linters:
+  # only enable the linters listed below
+  disable-all: true
+  enable:
+    # make sure all errors returned by functions are handled
+    - errcheck
+
+    # find unused code
+    - deadcode
+
+    # show how code can be simplified
+    - gosimple
+
+    # # make sure code is formatted
+    - gofmt
+
+    # examine code and report suspicious constructs, such as Printf calls whose
+    # arguments do not align with the format string
+    - govet
+
+    # make sure names and comments are used according to the conventions
+    - golint
+
+    # detect when assignments to existing variables are not used
+    - ineffassign
+
+    # run static analysis and find errors
+    - staticcheck
+
+    # find unused variables, functions, structs, types, etc.
+    - unused
+
+    # find unused struct fields
+    - structcheck
+
+    # find unused global variables
+    - varcheck
+
+    # parse and typecheck code
+    - typecheck
+
+issues:
+  # don't use the default exclude rules, this hides (among others) ignored
+  # errors from Close() calls
+  exclude-use-default: false
+
+  # list of things to not warn about
+  exclude:
+    # golint: do not warn about missing comments for exported stuff
+    - exported (function|method|var|type|const) `.*` should have comment or be unexported
+    # golint: ignore constants in all caps
+    - don't use ALL_CAPS in Go names; use CamelCase

.hound.yml

@@ -1,2 +0,0 @@
-go:
-  enabled: true

.travis.yml

@@ -1,51 +0,0 @@
-language: go
-sudo: false
-
-go:
-  - 1.8.3
-  - 1.9
-
-os:
-  - linux
-  - osx
-
-env:
-  matrix:
-    RESTIC_TEST_FUSE=0
-
-matrix:
-  exclude:
-    - os: osx
-      go: 1.8.3
-    - os: linux
-      go: 1.9
-  include:
-    - os: linux
-      go: 1.9
-      sudo: true
-      env:
-        RESTIC_TEST_FUSE=1
-
-branches:
-  only:
-    - master
-
-notifications:
-  irc:
-    channels:
-      - "chat.freenode.net#restic"
-    on_success: change
-    on_failure: change
-    skip_join: true
-
-install:
-  - go version
-  - export GOBIN="$GOPATH/bin"
-  - export PATH="$PATH:$GOBIN"
-  - go env
-
-script:
-  - go run run_integration_tests.go
-
-after_success:
-  - bash <(curl -s https://codecov.io/bash) -f all.cov

CONTRIBUTING.md

@@ -16,7 +16,8 @@ help also.
 
 The restic project uses the GitHub infrastructure (see the
 [project page](https://github.com/restic/restic)) for all related discussions
-as well as the `#restic` channel on `irc.freenode.net`.
+as well as the [forum](https://forum.restic.net/) and the `#restic` channel
+on [irc.freenode.net](https://kiwiirc.com/nextclient/irc.freenode.net/restic).
 
 If you want to find an area that currently needs improving have a look at the
 open issues listed at the
@@ -25,7 +26,10 @@ for discussing enhancement to the restic tools.
 
 If you are unsure what to do, please have a look at the issues, especially
 those tagged
-[minor complexity](https://github.com/restic/restic/labels/minor%20complexity).
+[minor complexity](https://github.com/restic/restic/labels/help%3A%20minor%20complexity)
+or [good first issue](https://github.com/restic/restic/labels/help%3A%20good%20first%20issue).
+If you are already a bit experienced with the restic internals, take a look
+at the issues tagged as [help wanted](https://github.com/restic/restic/labels/help%3A%20wanted).
 
 
 Reporting Bugs
@@ -46,8 +50,8 @@ Remember, the easier it is for us to reproduce the bug, the earlier it will be
 corrected!
 
 In addition, you can compile restic with debug support by running
-`go run build.go -tags debug` and instructing it to create a debug log by
-setting the environment variable `DEBUG_LOG` to a file, e.g. like this:
+`go run build.go -tags debug` and instructing it to create a debug
+log by setting the environment variable `DEBUG_LOG` to a file, e.g. like this:
 
     $ export DEBUG_LOG=/tmp/restic-debug.log
     $ restic backup ~/work
@@ -60,35 +64,25 @@ uploading it somewhere or post only the parts that are really relevant.
 Development Environment
 =======================
 
-In order to compile restic with the `go` tool directly, it needs to be checked
-out at the right path within a `GOPATH`. The concept of a `GOPATH` is explained
-in ["How to write Go code"](https://golang.org/doc/code.html).
+The repository contains the code written for restic in the directories
+`cmd/` and `internal/`.
 
-If you do not have a directory with Go code yet, executing the following
-instructions in your shell will create one for you and check out the restic
-repo:
+Restic requires Go version 1.13 or later for compiling. Clone the repo (without
+having `$GOPATH` set) and `cd` into the directory:
 
-    $ export GOPATH="$HOME/go"
-    $ mkdir -p "$GOPATH/src/github.com/restic"
-    $ cd "$GOPATH/src/github.com/restic"
+    $ unset GOPATH
     $ git clone https://github.com/restic/restic
     $ cd restic
 
-You can then build restic as follows:
+Then use the `go` tool to build restic:
 
     $ go build ./cmd/restic
     $ ./restic version
-    restic compiled manually
-    compiled with go1.8.3 on linux/amd64
+    restic 0.10.0-dev (compiled manually) compiled with go1.15.2 on linux/amd64
 
-The following commands can be used to run all the tests:
+You can run all tests with the following command:
 
-    $ go test ./cmd/... ./internal/...
-
-The repository contains two sets of directories with code: `cmd/` and
-`internal/` contain the code written for restic, whereas `vendor/` contains
-copies of libraries restic depends on. The libraries are managed with the
-[`dep`](https://github.com/golang/dep) tool.
+    $ go test ./...
 
 Providing Patches
 =================
@@ -102,57 +96,61 @@ down to the following steps:
     GitHub. For a new feature, please add an issue before starting to work on
     it, so that duplicate work is prevented.
 
- 1. First we would kindly ask you to fork our project on GitHub if you haven't
-    done so already.
+ 1. Next, fork our project on GitHub if you haven't done so already.
 
- 2. Clone the repository locally and create a new branch. If you are working on
-    the code itself, please set up the development environment as described in
-    the previous section. Especially take care to place your forked repository
-    at the correct path (`src/github.com/restic/restic`) within your `GOPATH`.
+ 2. Clone your fork of the repository locally and **create a new branch** for
+    your changes. If you are working on the code itself, please set up the
+    development environment as described in the previous section.
 
- 3. Then commit your changes as fine grained as possible, as smaller patches,
-    that handle one and only one issue are easier to discuss and merge.
+ 3. Commit your changes to the new branch as fine grained as possible, as
+    smaller patches, for individual changes, are easier to discuss and merge.
 
  4. Push the new branch with your changes to your fork of the repository.
 
  5. Create a pull request by visiting the GitHub website, it will guide you
-    through the process.
+    through the process. Please [allow edits from maintainers](https://help.github.com/en/github/collaborating-with-issues-and-pull-requests/allowing-changes-to-a-pull-request-branch-created-from-a-fork).
 
  6. You will receive comments on your code and the feature or bug that they
     address. Maybe you need to rework some minor things, in this case push new
-    commits to the branch you created for the pull request, they will be
+    commits to the branch you created for the pull request (or amend the
+    existing commit, use common sense to decide which is better), they will be
     automatically added to the pull request.
 
- 7. If your pull request changes anything that users should be aware of (a
-    bugfix, a new feature, ...) please add an entry to the file
-    ['CHANGELOG.md'](CHANGELOG.md). It will be used in the announcement of the
-    next stable release. While writing, ask yourself: If I were the user, what
-    would I need to be aware of with this change.
+ 7. If your pull request changes anything that users should be aware of
+    (a bugfix, a new feature, ...) please add an entry as a new file in
+    `changelog/unreleased` including the issue number in the filename (e.g.
+    `issue-8756`). Use the template in `changelog/TEMPLATE` for the content.
+    It will be used in the announcement of the next stable release. While
+    writing, ask yourself: If I were the user, what would I need to be aware
+    of with this change?
 
- 8. When your contribution adds and/or changes command-line parameters or help
-    texts, the manual pages need to be regenerated and commited to the
-    repository. In order to do this, compile restic and save the generated
-    updated man pages in the subdir `doc/man` with the following command:
-    `./restic manpage --output-dir doc/man`
-
- 9. Once your code looks good and passes all the tests, we'll merge it. Thanks
+ 8. Once your code looks good and passes all the tests, we'll merge it. Thanks
     a lot for your contribution!
 
 Please provide the patches for each bug or feature in a separate branch and
-open up a pull request for each.
+open up a pull request for each, as this simplifies discussion and merging.
 
 The restic project uses the `gofmt` tool for Go source indentation, so please
 run
 
     gofmt -w **/*.go
 
-in the project root directory before committing. Installing the script
-`fmt-check` from https://github.com/edsrzf/gofmt-git-hook locally as a
-pre-commit hook checks formatting before committing automatically, just copy
-this script to `.git/hooks/pre-commit`.
+in the project root directory before committing. For each Pull Request, the
+formatting is tested with `gofmt` for the latest stable version of Go.
+Installing the script `fmt-check` from https://github.com/edsrzf/gofmt-git-hook
+locally as a pre-commit hook checks formatting before committing automatically,
+just copy this script to `.git/hooks/pre-commit`.
+
+The project is using the program
+[`golangci-lint`](https://github.com/golangci/golangci-lint) to run a list of
+linters and checkers. It will be run on the code when you submit a PR. In order
+to check your code beforehand, you can run `golangci-lint run` manually.
+Eventually, we will enable `golangci-lint` for the whole code base. For now,
+you can ignore warnings printed for lines you did not modify, those will be
+ignored by the CI.
 
 For each pull request, several different systems run the integration tests on
-Linux, OS X and Windows. We won't merge any code that does not pass all tests
+Linux, macOS and Windows. We won't merge any code that does not pass all tests
 for all systems, so when a tests fails, try to find out what's wrong and fix
 it. If you need help on this, please leave a comment in the pull request, and
 we'll be glad to assist. Having a PR with failing integration tests is nothing
@@ -169,7 +167,7 @@ history and triaging bugs much easier.
 Git commit messages have a very terse summary in the first line of the commit
 message, followed by an empty line, followed by a more verbose description or a
 List of changed things. For examples, please refer to the excellent [How to
-Write a Git Commit Message](http://chris.beams.io/posts/git-commit/).
+Write a Git Commit Message](https://chris.beams.io/posts/git-commit/).
 
 If you change/add multiple different things that aren't related at all, try to
 make several smaller commits. This is much easier to review. Using `git add -p`

GOVERNANCE.md

@@ -0,0 +1,27 @@
+# restic project governance
+
+## Overview
+
+The restic project uses a governance model commonly described as Benevolent
+Dictator For Life (BDFL). This document outlines our understanding of what this
+means. It is derived from the [i3 window manager project
+governance](https://raw.githubusercontent.com/i3/i3/next/.github/GOVERNANCE.md).
+
+## Roles
+
+* user: anyone who interacts with the restic project
+* core contributor: a handful of people who have contributed significantly to
+  the project by any means (issue triage, support, documentation, code, etc.).
+  Core contributors are recognizable via GitHub’s "Member" badge.
+* Benevolent Dictator For Life (BDFL): a single individual who makes decisions
+  when consensus cannot be reached. restic's current BDFL is [@fd0](https://github.com/fd0).
+
+## Decision making process
+
+In general, we try to reach consensus in discussions. In case consensus cannot
+be reached, the BDFL makes a decision.
+
+## Contribution process
+
+The contribution process is described in a separate document called
+[CONTRIBUTING](CONTRIBUTING.md).

Gopkg.lock

@@ -1,207 +0,0 @@
-# This file is autogenerated, do not edit; changes may be undone by the next 'dep ensure'.
-
-
-[[projects]]
-  branch = "master"
-  name = "bazil.org/fuse"
-  packages = [".","fs","fuseutil"]
-  revision = "371fbbdaa8987b715bdd21d6adc4c9b20155f748"
-
-[[projects]]
-  name = "cloud.google.com/go"
-  packages = ["compute/metadata"]
-  revision = "5a9e19d4e1e41a734154e44a2132b358afb49a03"
-  version = "v0.13.0"
-
-[[projects]]
-  name = "github.com/Azure/azure-sdk-for-go"
-  packages = ["storage"]
-  revision = "df4dd90d076ebbf6e87d08d3f00bfac8ff4bde1a"
-  version = "v10.3.1-beta"
-
-[[projects]]
-  name = "github.com/Azure/go-autorest"
-  packages = ["autorest","autorest/adal","autorest/azure","autorest/date"]
-  revision = "5432abe734f8d95c78340cd56712f912906e6514"
-  version = "v8.3.1"
-
-[[projects]]
-  name = "github.com/cpuguy83/go-md2man"
-  packages = ["md2man"]
-  revision = "1d903dcb749992f3741d744c0f8376b4bd7eb3e1"
-  version = "v1.0.7"
-
-[[projects]]
-  name = "github.com/dgrijalva/jwt-go"
-  packages = ["."]
-  revision = "d2709f9f1f31ebcda9651b03077758c1f3a0018c"
-  version = "v3.0.0"
-
-[[projects]]
-  branch = "master"
-  name = "github.com/dustin/go-humanize"
-  packages = ["."]
-  revision = "79e699ccd02f240a1f1fbbdcee7e64c1c12e41aa"
-
-[[projects]]
-  name = "github.com/elithrar/simple-scrypt"
-  packages = ["."]
-  revision = "2325946f714c95de4a6088202c402fbdfa64163b"
-  version = "v1.2.0"
-
-[[projects]]
-  name = "github.com/go-ini/ini"
-  packages = ["."]
-  revision = "20b96f641a5ea98f2f8619ff4f3e061cff4833bd"
-  version = "v1.28.2"
-
-[[projects]]
-  branch = "master"
-  name = "github.com/golang/protobuf"
-  packages = ["proto"]
-  revision = "17ce1425424ab154092bbb43af630bd647f3bb0d"
-
-[[projects]]
-  name = "github.com/inconshreveable/mousetrap"
-  packages = ["."]
-  revision = "76626ae9c91c4f2a10f34cad8ce83ea42c93bb75"
-  version = "v1.0"
-
-[[projects]]
-  branch = "master"
-  name = "github.com/kr/fs"
-  packages = ["."]
-  revision = "2788f0dbd16903de03cb8186e5c7d97b69ad387b"
-
-[[projects]]
-  name = "github.com/kurin/blazer"
-  packages = ["b2","base","internal/b2types","internal/blog"]
-  revision = "1a870c3ee8b83e17d762307c6eae8f390ac3f4a0"
-  version = "v0.1.1"
-
-[[projects]]
-  branch = "master"
-  name = "github.com/minio/go-homedir"
-  packages = ["."]
-  revision = "21304a94172ae3a09dee2cd86a12fb6f842138c7"
-
-[[projects]]
-  name = "github.com/minio/minio-go"
-  packages = [".","pkg/credentials","pkg/encrypt","pkg/policy","pkg/s3signer","pkg/s3utils","pkg/set"]
-  revision = "4e0f567303d4cc90ceb055a451959fb9fc391fb9"
-  version = "3.0.3"
-
-[[projects]]
-  branch = "master"
-  name = "github.com/ncw/swift"
-  packages = ["."]
-  revision = "9d3f812e23d270d1c66a9a01e20af1005061cdc4"
-
-[[projects]]
-  name = "github.com/pkg/errors"
-  packages = ["."]
-  revision = "645ef00459ed84a119197bfb8d8205042c6df63d"
-  version = "v0.8.0"
-
-[[projects]]
-  name = "github.com/pkg/profile"
-  packages = ["."]
-  revision = "5b67d428864e92711fcbd2f8629456121a56d91f"
-  version = "v1.2.1"
-
-[[projects]]
-  name = "github.com/pkg/sftp"
-  packages = ["."]
-  revision = "98203f5a8333288eb3163b7c667d4260fe1333e9"
-  version = "1.0.0"
-
-[[projects]]
-  name = "github.com/pkg/xattr"
-  packages = ["."]
-  revision = "23c75e3f6c1d8b13b3dd905b011a7f38a06044b7"
-  version = "v0.2.1"
-
-[[projects]]
-  name = "github.com/restic/chunker"
-  packages = ["."]
-  revision = "bb2ecf9a98e35a0b336ffc23fc515fb6e7961577"
-  version = "v0.1.0"
-
-[[projects]]
-  name = "github.com/russross/blackfriday"
-  packages = ["."]
-  revision = "4048872b16cc0fc2c5fd9eacf0ed2c2fedaa0c8c"
-  version = "v1.5"
-
-[[projects]]
-  name = "github.com/satori/uuid"
-  packages = ["."]
-  revision = "879c5887cd475cd7864858769793b2ceb0d44feb"
-  version = "v1.1.0"
-
-[[projects]]
-  name = "github.com/sirupsen/logrus"
-  packages = ["."]
-  revision = "f006c2ac4710855cf0f916dd6b77acf6b048dc6e"
-  version = "v1.0.3"
-
-[[projects]]
-  branch = "master"
-  name = "github.com/spf13/cobra"
-  packages = [".","doc"]
-  revision = "b78744579491c1ceeaaa3b40205e56b0591b93a3"
-
-[[projects]]
-  name = "github.com/spf13/pflag"
-  packages = ["."]
-  revision = "e57e3eeb33f795204c1ca35f56c44f83227c6e66"
-  version = "v1.0.0"
-
-[[projects]]
-  branch = "master"
-  name = "golang.org/x/crypto"
-  packages = ["curve25519","ed25519","ed25519/internal/edwards25519","pbkdf2","poly1305","scrypt","ssh","ssh/terminal"]
-  revision = "faadfbdc035307d901e69eea569f5dda451a3ee3"
-
-[[projects]]
-  branch = "master"
-  name = "golang.org/x/net"
-  packages = ["context","context/ctxhttp"]
-  revision = "b129b8e0fbeb39c8358e51a07ab6c50ad415e72e"
-
-[[projects]]
-  branch = "master"
-  name = "golang.org/x/oauth2"
-  packages = [".","google","internal","jws","jwt"]
-  revision = "13449ad91cb26cb47661c1b080790392170385fd"
-
-[[projects]]
-  branch = "master"
-  name = "golang.org/x/sys"
-  packages = ["unix","windows"]
-  revision = "062cd7e4e68206d8bab9b18396626e855c992658"
-
-[[projects]]
-  branch = "master"
-  name = "google.golang.org/api"
-  packages = ["gensupport","googleapi","googleapi/internal/uritemplates","storage/v1"]
-  revision = "2fe03ca2dc379c00d654a4459d1a50812cac2848"
-
-[[projects]]
-  name = "google.golang.org/appengine"
-  packages = [".","internal","internal/app_identity","internal/base","internal/datastore","internal/log","internal/modules","internal/remote_api","internal/urlfetch","urlfetch"]
-  revision = "150dc57a1b433e64154302bdc40b6bb8aefa313a"
-  version = "v1.0.0"
-
-[[projects]]
-  branch = "v2"
-  name = "gopkg.in/yaml.v2"
-  packages = ["."]
-  revision = "eb3733d160e74a9c7e442f435eb3bea458e1d19f"
-
-[solve-meta]
-  analyzer-name = "dep"
-  analyzer-version = 1
-  inputs-digest = "53e4779dc4c7de2cd8b195f13c215c24da5efc5e33acf584615b5c43bfefd2db"
-  solver-name = "gps-cdcl"
-  solver-version = 1

Gopkg.toml

@@ -1,78 +0,0 @@
-
-# Gopkg.toml example
-#
-# Refer to https://github.com/golang/dep/blob/master/docs/Gopkg.toml.md
-# for detailed Gopkg.toml documentation.
-#
-# required = ["github.com/user/thing/cmd/thing"]
-# ignored = ["github.com/user/project/pkgX", "bitbucket.org/user/project/pkgA/pkgY"]
-#
-# [[constraint]]
-#   name = "github.com/user/project"
-#   version = "1.0.0"
-#
-# [[constraint]]
-#   name = "github.com/user/project2"
-#   branch = "dev"
-#   source = "github.com/myfork/project2"
-#
-# [[override]]
-#  name = "github.com/x/y"
-#  version = "2.4.0"
-
-
-[[constraint]]
-  branch = "master"
-  name = "bazil.org/fuse"
-
-[[constraint]]
-  name = "github.com/elithrar/simple-scrypt"
-  branch = "master"
-
-[[constraint]]
-  name = "github.com/kurin/blazer"
-  version = "0.1.0"
-
-[[constraint]]
-  name = "github.com/minio/minio-go"
-  version = "3.0.0"
-
-[[constraint]]
-  branch = "master"
-  name = "github.com/ncw/swift"
-
-[[constraint]]
-  name = "github.com/pkg/errors"
-  version = "0.8.0"
-
-[[constraint]]
-  name = "github.com/pkg/profile"
-  version = "1.2.1"
-
-[[constraint]]
-  branch = "master"
-  name = "github.com/pkg/sftp"
-
-[[constraint]]
-  name = "github.com/pkg/xattr"
-  version = "0.2.1"
-
-[[constraint]]
-  name = "github.com/restic/chunker"
-  version = "0.1.0"
-
-[[constraint]]
-  branch = "master"
-  name = "github.com/spf13/cobra"
-
-[[constraint]]
-  branch = "master"
-  name = "golang.org/x/crypto"
-
-[[constraint]]
-  branch = "master"
-  name = "golang.org/x/net"
-
-[[constraint]]
-  branch = "master"
-  name = "golang.org/x/sys"

LICENSE

@@ -1,19 +1,21 @@
+BSD 2-Clause License
+
 Copyright (c) 2014, Alexander Neumann <alexander@bumpern.de>
 All rights reserved.
 
 Redistribution and use in source and binary forms, with or without
 modification, are permitted provided that the following conditions are met:
 
-1. Redistributions of source code must retain the above copyright notice, this
-   list of conditions and the following disclaimer.
+* Redistributions of source code must retain the above copyright notice, this
+  list of conditions and the following disclaimer.
 
-2. Redistributions in binary form must reproduce the above copyright notice,
-   this list of conditions and the following disclaimer in the documentation
-   and/or other materials provided with the distribution.
+* Redistributions in binary form must reproduce the above copyright notice,
+  this list of conditions and the following disclaimer in the documentation
+  and/or other materials provided with the distribution.
 
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR

README.md

@@ -0,0 +1,113 @@
+[![Documentation](https://readthedocs.org/projects/restic/badge/?version=latest)](https://restic.readthedocs.io/en/latest/?badge=latest)
+[![Build Status](https://github.com/restic/restic/workflows/test/badge.svg)](https://github.com/restic/restic/actions?query=workflow%3Atest)
+[![Go Report Card](https://goreportcard.com/badge/github.com/restic/restic)](https://goreportcard.com/report/github.com/restic/restic)
+
+# Introduction
+
+restic is a backup program that is fast, efficient and secure. It supports the three major operating systems (Linux, macOS, Windows) and a few smaller ones (FreeBSD, OpenBSD).
+
+For detailed usage and installation instructions check out the [documentation](https://restic.readthedocs.io/en/latest).
+
+You can ask questions in our [Discourse forum](https://forum.restic.net).
+
+Quick start
+-----------
+
+Once you've [installed](https://restic.readthedocs.io/en/latest/020_installation.html) restic, start
+off with creating a repository for your backups:
+
+    $ restic init --repo /tmp/backup
+    enter password for new backend:
+    enter password again:
+    created restic backend 085b3c76b9 at /tmp/backup
+    Please note that knowledge of your password is required to access the repository.
+    Losing your password means that your data is irrecoverably lost.
+
+and add some data:
+
+    $ restic --repo /tmp/backup backup ~/work
+    enter password for repository:
+    scan [/home/user/work]
+    scanned 764 directories, 1816 files in 0:00
+    [0:29] 100.00%  54.732 MiB/s  1.582 GiB / 1.582 GiB  2580 / 2580 items  0 errors  ETA 0:00
+    duration: 0:29, 54.47MiB/s
+    snapshot 40dc1520 saved
+
+Next you can either use `restic restore` to restore files or use `restic
+mount` to mount the repository via fuse and browse the files from previous
+snapshots.
+
+For more options check out the [online documentation](https://restic.readthedocs.io/en/latest/).
+
+# Backends
+
+Saving a backup on the same machine is nice but not a real backup strategy.
+Therefore, restic supports the following backends for storing backups natively:
+
+- [Local directory](https://restic.readthedocs.io/en/latest/030_preparing_a_new_repo.html#local)
+- [sftp server (via SSH)](https://restic.readthedocs.io/en/latest/030_preparing_a_new_repo.html#sftp)
+- [HTTP REST server](https://restic.readthedocs.io/en/latest/030_preparing_a_new_repo.html#rest-server) ([protocol](doc/100_references.rst#rest-backend), [rest-server](https://github.com/restic/rest-server))
+- [AWS S3](https://restic.readthedocs.io/en/latest/030_preparing_a_new_repo.html#amazon-s3) (either from Amazon or using the [Minio](https://minio.io) server)
+- [OpenStack Swift](https://restic.readthedocs.io/en/latest/030_preparing_a_new_repo.html#openstack-swift)
+- [BackBlaze B2](https://restic.readthedocs.io/en/latest/030_preparing_a_new_repo.html#backblaze-b2)
+- [Microsoft Azure Blob Storage](https://restic.readthedocs.io/en/latest/030_preparing_a_new_repo.html#microsoft-azure-blob-storage)
+- [Google Cloud Storage](https://restic.readthedocs.io/en/latest/030_preparing_a_new_repo.html#google-cloud-storage)
+- And many other services via the [rclone](https://rclone.org) [Backend](https://restic.readthedocs.io/en/latest/030_preparing_a_new_repo.html#other-services-via-rclone)
+
+# Design Principles
+
+Restic is a program that does backups right and was designed with the
+following principles in mind:
+
+-  **Easy:** Doing backups should be a frictionless process, otherwise
+   you might be tempted to skip it. Restic should be easy to configure
+   and use, so that, in the event of a data loss, you can just restore
+   it. Likewise, restoring data should not be complicated.
+
+-  **Fast**: Backing up your data with restic should only be limited by
+   your network or hard disk bandwidth so that you can backup your files
+   every day. Nobody does backups if it takes too much time. Restoring
+   backups should only transfer data that is needed for the files that
+   are to be restored, so that this process is also fast.
+
+-  **Verifiable**: Much more important than backup is restore, so restic
+   enables you to easily verify that all data can be restored.
+
+-  **Secure**: Restic uses cryptography to guarantee confidentiality and
+   integrity of your data. The location the backup data is stored is
+   assumed not to be a trusted environment (e.g. a shared space where
+   others like system administrators are able to access your backups).
+   Restic is built to secure your data against such attackers.
+
+-  **Efficient**: With the growth of data, additional snapshots should
+   only take the storage of the actual increment. Even more, duplicate
+   data should be de-duplicated before it is actually written to the
+   storage back end to save precious backup space.
+
+# Reproducible Builds
+
+The binaries released with each restic version starting at 0.6.1 are
+[reproducible](https://reproducible-builds.org/), which means that you can
+reproduce a byte identical version from the source code for that
+release. Instructions on how to do that are contained in the
+[builder repository](https://github.com/restic/builder).
+
+News
+----
+
+You can follow the restic project on Twitter [@resticbackup](https://twitter.com/resticbackup) or by subscribing to
+the [project blog](https://restic.net/blog/).
+
+License
+-------
+
+Restic is licensed under [BSD 2-Clause License](https://opensource.org/licenses/BSD-2-Clause). You can find the
+complete text in [``LICENSE``](LICENSE).
+
+Sponsorship
+-----------
+
+Backend integration tests for Google Cloud Storage and Microsoft Azure Blob
+Storage are sponsored by [AppsCode](https://appscode.com)!
+
+[![Sponsored by AppsCode](https://cdn.appscode.com/images/logo/appscode/ac-logo-color.png)](https://appscode.com)

README.rst

@@ -1,122 +0,0 @@
-|Documentation| |Build Status| |Build status| |Report Card| |Say Thanks|
-
-Introduction
-------------
-
-restic is a backup program that is fast, efficient and secure.
-
-For detailed usage and installation instructions check out the `documentation <https://restic.readthedocs.io/en/latest>`__.
-
-You can ask questions in our `Discourse forum <https://forum.restic.net>`__.
-
-Quick start
------------
-
-Once you've `installed
-<https://restic.readthedocs.io/en/latest/installation.html>`__ restic, start
-off with creating a repository for your backups:
-
-.. code-block:: console
-
-    $ restic init --repo /tmp/backup
-    enter password for new backend:
-    enter password again:
-    created restic backend 085b3c76b9 at /tmp/backup
-    Please note that knowledge of your password is required to access the repository.
-    Losing your password means that your data is irrecoverably lost.
-
-and add some data:
-
-.. code-block:: console
-
-    $ restic -r /tmp/backup backup ~/work
-    enter password for repository:
-    scan [/home/user/work]
-    scanned 764 directories, 1816 files in 0:00
-    [0:29] 100.00%  54.732 MiB/s  1.582 GiB / 1.582 GiB  2580 / 2580 items  0 errors  ETA 0:00
-    duration: 0:29, 54.47MiB/s
-    snapshot 40dc1520 saved
-
-Next you can either use ``restic restore`` to restore files or use ``restic
-mount`` to mount the repository via fuse and browse the files from previous
-snapshots.
-
-For more options check out the `manual guide <https://restic.readthedocs.io/en/latest/manual.html>`__.
-
-Backends
---------
-
-Saving a backup on the same machine is nice but not a real backup strategy.
-Therefore, restic supports the following backends for storing backups natively:
-
-- `Local directory <https://restic.readthedocs.io/en/latest/manual.html#local>`__
-- `sftp server (via SSH) <https://restic.readthedocs.io/en/latest/manual.html#sftp>`__
-- `HTTP REST server <https://restic.readthedocs.io/en/latest/manual.html#rest-server>`__ (`protocol <doc/rest_backend.rst>`__ `rest-server <https://github.com/restic/rest-server>`__)
-- `AWS S3 <https://restic.readthedocs.io/en/latest/manual.html#amazon-s3>`__ (either from Amazon or using the `Minio <https://minio.io>`__ server)
-- `OpenStack Swift <https://restic.readthedocs.io/en/latest/manual.html#openstack-swift>`__
-- `BackBlaze B2 <https://restic.readthedocs.io/en/latest/manual.html#backblaze-b2>`__
-- `Microsoft Azure Blob Storage <https://restic.readthedocs.io/en/latest/manual.html#microsoft-azure-blob-storage>`__
-- `Google Cloud Storage <https://restic.readthedocs.io/en/latest/manual.html#google-cloud-storage>`__
-
-Design Principles
------------------
-
-Restic is a program that does backups right and was designed with the
-following principles in mind:
-
--  **Easy:** Doing backups should be a frictionless process, otherwise
-   you might be tempted to skip it. Restic should be easy to configure
-   and use, so that, in the event of a data loss, you can just restore
-   it. Likewise, restoring data should not be complicated.
-
--  **Fast**: Backing up your data with restic should only be limited by
-   your network or hard disk bandwidth so that you can backup your files
-   every day. Nobody does backups if it takes too much time. Restoring
-   backups should only transfer data that is needed for the files that
-   are to be restored, so that this process is also fast.
-
--  **Verifiable**: Much more important than backup is restore, so restic
-   enables you to easily verify that all data can be restored.
-
--  **Secure**: Restic uses cryptography to guarantee confidentiality and
-   integrity of your data. The location the backup data is stored is
-   assumed not to be a trusted environment (e.g. a shared space where
-   others like system administrators are able to access your backups).
-   Restic is built to secure your data against such attackers.
-
--  **Efficient**: With the growth of data, additional snapshots should
-   only take the storage of the actual increment. Even more, duplicate
-   data should be de-duplicated before it is actually written to the
-   storage back end to save precious backup space.
-
-Reproducible Builds
--------------------
-
-The binaries released with each restic version starting at 0.6.1 are
-`reproducible <https://reproducible-builds.org/>`__, which means that you can
-easily reproduce a byte identical version from the source code for that
-release. Instructions on how to do that are contained in the
-`builder repository <https://github.com/restic/builder>`__.
-
-News
-----
-
-You can follow the restic project on Twitter `@resticbackup <https://twitter.com/resticbackup>`__ or by subscribing to
-the `development blog <https://restic.github.io/blog/>`__.
-
-License
--------
-
-Restic is licensed under "BSD 2-Clause License". You can find the
-complete text in ``LICENSE``.
-
-.. |Documentation| image:: https://readthedocs.org/projects/restic/badge/?version=latest
-   :target: https://restic.readthedocs.io/en/latest/?badge=latest
-.. |Build Status| image:: https://travis-ci.org/restic/restic.svg?branch=master
-   :target: https://travis-ci.org/restic/restic
-.. |Build status| image:: https://ci.appveyor.com/api/projects/status/nuy4lfbgfbytw92q/branch/master?svg=true
-   :target: https://ci.appveyor.com/project/fd0/restic/branch/master
-.. |Report Card| image:: https://goreportcard.com/badge/github.com/restic/restic
-   :target: https://goreportcard.com/report/github.com/restic/restic
-.. |Say Thanks| image:: https://img.shields.io/badge/Say%20Thanks-!-1EAEDB.svg
-   :target: https://saythanks.io/to/restic

VERSION

@@ -1 +1 @@
-0.7.2
+0.12.0

appveyor.yml

@@ -1,29 +0,0 @@
-clone_folder: c:\restic
-
-environment:
-  GOPATH: c:\gopath
-
-branches:
-  only:
-    - master
-
-init:
-  - ps: >-
-      $app = Get-WmiObject -Class Win32_Product -Filter "Vendor = 'http://golang.org'"
-
-      if ($app) {
-        $app.Uninstall()
-      }
-
-install:
-  - rmdir c:\go /s /q
-  - appveyor DownloadFile https://storage.googleapis.com/golang/go1.9.windows-amd64.msi
-  - msiexec /i go1.9.windows-amd64.msi /q
-  - go version
-  - go env
-  - appveyor DownloadFile http://sourceforge.netcologne.de/project/gnuwin32/tar/1.13-1/tar-1.13-1-bin.zip -FileName tar.zip
-  - 7z x tar.zip bin/tar.exe
-  - set PATH=bin/;%PATH%
-
-build_script:
-  - go run run_integration_tests.go

build.go

@@ -1,4 +1,41 @@
-// +build ignore
+// Description
+//
+// This program aims to make building Go programs for end users easier by just
+// calling it with `go run`, without having to setup a GOPATH.
+//
+// This program needs Go >= 1.12. It'll use Go modules for compilation. It
+// builds the package configured as Main in the Config struct.
+
+// BSD 2-Clause License
+//
+// Copyright (c) 2016-2018, Alexander Neumann <alexander@bumpern.de>
+// All rights reserved.
+//
+// This file has been derived from the repository at:
+// https://github.com/fd0/build-go
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are met:
+//
+// * Redistributions of source code must retain the above copyright notice, this
+//   list of conditions and the following disclaimer.
+//
+// * Redistributions in binary form must reproduce the above copyright notice,
+//   this list of conditions and the following disclaimer in the documentation
+//   and/or other materials provided with the distribution.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+// FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+// +build ignore_build_go
 
 package main
 
@@ -8,159 +45,40 @@ import (
 	"io/ioutil"
 	"os"
 	"os/exec"
-	"path"
 	"path/filepath"
 	"runtime"
+	"strconv"
 	"strings"
 )
 
+// config contains the configuration for the program to build.
+var config = Config{
+	Name:             "restic",                                 // name of the program executable and directory
+	Namespace:        "github.com/restic/restic",               // subdir of GOPATH, e.g. "github.com/foo/bar"
+	Main:             "./cmd/restic",                           // package name for the main package
+	DefaultBuildTags: []string{"selfupdate"},                   // specify build tags which are always used
+	Tests:            []string{"./..."},                        // tests to run
+	MinVersion:       GoVersion{Major: 1, Minor: 11, Patch: 0}, // minimum Go version supported
+}
+
+// Config configures the build.
+type Config struct {
+	Name             string
+	Namespace        string
+	Main             string
+	DefaultBuildTags []string
+	Tests            []string
+	MinVersion       GoVersion
+}
+
 var (
-	verbose    bool
-	keepGopath bool
-	runTests   bool
-	enableCGO  bool
+	verbose   bool
+	runTests  bool
+	enableCGO bool
+	enablePIE bool
+	goVersion = ParseGoVersion(runtime.Version())
 )
 
-var config = struct {
-	Name      string
-	Namespace string
-	Main      string
-	Tests     []string
-}{
-	Name:      "restic",                              // name of the program executable and directory
-	Namespace: "github.com/restic/restic",            // subdir of GOPATH, e.g. "github.com/foo/bar"
-	Main:      "github.com/restic/restic/cmd/restic", // package name for the main package
-	Tests: []string{ // tests to run
-		"github.com/restic/restic/internal/...",
-		"github.com/restic/restic/cmd/..."},
-}
-
-// specialDir returns true if the file begins with a special character ('.' or '_').
-func specialDir(name string) bool {
-	if name == "." {
-		return false
-	}
-
-	base := filepath.Base(name)
-	if base == "vendor" || base[0] == '_' || base[0] == '.' {
-		return true
-	}
-
-	return false
-}
-
-// excludePath returns true if the file should not be copied to the new GOPATH.
-func excludePath(name string) bool {
-	ext := path.Ext(name)
-	if ext == ".go" || ext == ".s" || ext == ".h" {
-		return false
-	}
-
-	parentDir := filepath.Base(filepath.Dir(name))
-	if parentDir == "testdata" {
-		return false
-	}
-
-	return true
-}
-
-// updateGopath builds a valid GOPATH at dst, with all Go files in src/ copied
-// to dst/prefix/, so calling
-//
-//   updateGopath("/tmp/gopath", "/home/u/restic", "github.com/restic/restic")
-//
-// with "/home/u/restic" containing the file "foo.go" yields the following tree
-// at "/tmp/gopath":
-//
-//   /tmp/gopath
-//   └── src
-//       └── github.com
-//           └── restic
-//               └── restic
-//                   └── foo.go
-func updateGopath(dst, src, prefix string) error {
-	verbosePrintf("copy contents of %v to %v\n", src, filepath.Join(dst, prefix))
-	return filepath.Walk(src, func(name string, fi os.FileInfo, err error) error {
-		if name == src {
-			return err
-		}
-
-		if specialDir(name) {
-			if fi.IsDir() {
-				return filepath.SkipDir
-			}
-
-			return nil
-		}
-
-		if err != nil {
-			return err
-		}
-
-		if fi.IsDir() {
-			return nil
-		}
-
-		if excludePath(name) {
-			return nil
-		}
-
-		intermediatePath, err := filepath.Rel(src, name)
-		if err != nil {
-			return err
-		}
-
-		fileSrc := filepath.Join(src, intermediatePath)
-		fileDst := filepath.Join(dst, "src", prefix, intermediatePath)
-
-		return copyFile(fileDst, fileSrc)
-	})
-}
-
-func directoryExists(dirname string) bool {
-	stat, err := os.Stat(dirname)
-	if err != nil && os.IsNotExist(err) {
-		return false
-	}
-
-	return stat.IsDir()
-}
-
-// copyFile creates dst from src, preserving file attributes and timestamps.
-func copyFile(dst, src string) error {
-	fi, err := os.Stat(src)
-	if err != nil {
-		return err
-	}
-
-	fsrc, err := os.Open(src)
-	if err != nil {
-		return err
-	}
-	defer fsrc.Close()
-
-	if err = os.MkdirAll(filepath.Dir(dst), 0755); err != nil {
-		fmt.Printf("MkdirAll(%v)\n", filepath.Dir(dst))
-		return err
-	}
-
-	fdst, err := os.Create(dst)
-	if err != nil {
-		return err
-	}
-	defer fdst.Close()
-
-	_, err = io.Copy(fdst, fsrc)
-	if err == nil {
-		err = os.Chmod(dst, fi.Mode())
-	}
-	if err == nil {
-		err = os.Chtimes(dst, fi.ModTime(), fi.ModTime())
-	}
-
-	return err
-}
-
 // die prints the message with fmt.Fprintf() to stderr and exits with an error
 // code.
 func die(message string, args ...interface{}) {
@@ -174,12 +92,13 @@ func showUsage(output io.Writer) {
 	fmt.Fprintf(output, "OPTIONS:\n")
 	fmt.Fprintf(output, "  -v     --verbose       output more messages\n")
 	fmt.Fprintf(output, "  -t     --tags          specify additional build tags\n")
-	fmt.Fprintf(output, "  -k     --keep-gopath   do not remove the GOPATH after build\n")
 	fmt.Fprintf(output, "  -T     --test          run tests\n")
 	fmt.Fprintf(output, "  -o     --output        set output file name\n")
 	fmt.Fprintf(output, "         --enable-cgo    use CGO to link against libc\n")
+	fmt.Fprintf(output, "         --enable-pie    use PIE buildmode\n")
 	fmt.Fprintf(output, "         --goos value    set GOOS for cross-compilation\n")
 	fmt.Fprintf(output, "         --goarch value  set GOARCH for cross-compilation\n")
+	fmt.Fprintf(output, "         --goarm value   set GOARM for cross-compilation\n")
 }
 
 func verbosePrintf(message string, args ...interface{}) {
@@ -190,49 +109,77 @@ func verbosePrintf(message string, args ...interface{}) {
 	fmt.Printf("build: "+message, args...)
 }
 
-// cleanEnv returns a clean environment with GOPATH and GOBIN removed (if
-// present).
-func cleanEnv() (env []string) {
-	for _, v := range os.Environ() {
-		if strings.HasPrefix(v, "GOPATH=") || strings.HasPrefix(v, "GOBIN=") {
+// printEnv prints Go-relevant environment variables in a nice way using verbosePrintf.
+func printEnv(env []string) {
+	verbosePrintf("environment (GO*):\n")
+	for _, v := range env {
+		// ignore environment variables which do not start with GO*.
+		if !strings.HasPrefix(v, "GO") {
 			continue
 		}
-
-		env = append(env, v)
+		verbosePrintf("  %s\n", v)
 	}
-
-	return env
 }
 
 // build runs "go build args..." with GOPATH set to gopath.
-func build(cwd, goos, goarch, gopath string, args ...string) error {
+func build(cwd string, env map[string]string, args ...string) error {
 	a := []string{"build"}
-	a = append(a, "-asmflags", fmt.Sprintf("-trimpath=%s", gopath))
-	a = append(a, "-gcflags", fmt.Sprintf("-trimpath=%s", gopath))
+
+	// try to remove all absolute paths from resulting binary
+	if goVersion.AtLeast(GoVersion{1, 13, 0}) {
+		// use the new flag introduced by Go 1.13
+		a = append(a, "-trimpath")
+	} else {
+		// otherwise try to trim as many paths as possible
+		a = append(a, "-asmflags", fmt.Sprintf("all=-trimpath=%s", cwd))
+		a = append(a, "-gcflags", fmt.Sprintf("all=-trimpath=%s", cwd))
+	}
+
+	if enablePIE {
+		a = append(a, "-buildmode=pie")
+	}
+
 	a = append(a, args...)
 	cmd := exec.Command("go", a...)
-	cmd.Env = append(cleanEnv(), "GOPATH="+gopath, "GOARCH="+goarch, "GOOS="+goos)
+	cmd.Env = os.Environ()
+	for k, v := range env {
+		cmd.Env = append(cmd.Env, k+"="+v)
+	}
 	if !enableCGO {
 		cmd.Env = append(cmd.Env, "CGO_ENABLED=0")
 	}
 
+	printEnv(cmd.Env)
+
 	cmd.Dir = cwd
 	cmd.Stdout = os.Stdout
 	cmd.Stderr = os.Stderr
-	verbosePrintf("go %s\n", args)
+
+	verbosePrintf("chdir %q\n", cwd)
+	verbosePrintf("go %q\n", a)
 
 	return cmd.Run()
 }
 
 // test runs "go test args..." with GOPATH set to gopath.
-func test(cwd, gopath string, args ...string) error {
-	args = append([]string{"test"}, args...)
+func test(cwd string, env map[string]string, args ...string) error {
+	args = append([]string{"test", "-count", "1"}, args...)
 	cmd := exec.Command("go", args...)
-	cmd.Env = append(cleanEnv(), "GOPATH="+gopath)
+	cmd.Env = os.Environ()
+	for k, v := range env {
+		cmd.Env = append(cmd.Env, k+"="+v)
+	}
+	if !enableCGO {
+		cmd.Env = append(cmd.Env, "CGO_ENABLED=0")
+	}
 	cmd.Dir = cwd
 	cmd.Stdout = os.Stdout
 	cmd.Stderr = os.Stderr
-	verbosePrintf("go %s\n", args)
+
+	printEnv(cmd.Env)
+
+	verbosePrintf("chdir %q\n", cwd)
+	verbosePrintf("go %q\n", args)
 
 	return cmd.Run()
 }
@@ -300,20 +247,106 @@ func (cs Constants) LDFlags() string {
 	return strings.Join(l, " ")
 }
 
+// GoVersion is the version of Go used to compile the project.
+type GoVersion struct {
+	Major int
+	Minor int
+	Patch int
+}
+
+// ParseGoVersion parses the Go version s. If s cannot be parsed, the returned GoVersion is null.
+func ParseGoVersion(s string) (v GoVersion) {
+	if !strings.HasPrefix(s, "go") {
+		return
+	}
+
+	s = s[2:]
+	data := strings.Split(s, ".")
+	if len(data) < 2 || len(data) > 3 {
+		// invalid version
+		return GoVersion{}
+	}
+
+	var err error
+
+	v.Major, err = strconv.Atoi(data[0])
+	if err != nil {
+		return GoVersion{}
+	}
+
+	// try to parse the minor version while removing an eventual suffix (like
+	// "rc2" or so)
+	for s := data[1]; s != ""; s = s[:len(s)-1] {
+		v.Minor, err = strconv.Atoi(s)
+		if err == nil {
+			break
+		}
+	}
+
+	if v.Minor == 0 {
+		// no minor version found
+		return GoVersion{}
+	}
+
+	if len(data) >= 3 {
+		v.Patch, err = strconv.Atoi(data[2])
+		if err != nil {
+			return GoVersion{}
+		}
+	}
+
+	return
+}
+
+// AtLeast returns true if v is at least as new as other. If v is empty, true is returned.
+func (v GoVersion) AtLeast(other GoVersion) bool {
+	var empty GoVersion
+
+	// the empty version satisfies all versions
+	if v == empty {
+		return true
+	}
+
+	if v.Major < other.Major {
+		return false
+	}
+
+	if v.Minor < other.Minor {
+		return false
+	}
+
+	if v.Patch < other.Patch {
+		return false
+	}
+
+	return true
+}
+
+func (v GoVersion) String() string {
+	return fmt.Sprintf("Go %d.%d.%d", v.Major, v.Minor, v.Patch)
+}
+
 func main() {
-	ver := runtime.Version()
-	if strings.HasPrefix(ver, "go1") && ver < "go1.8" {
-		fmt.Fprintf(os.Stderr, "Go version %s detected, restic requires at least Go 1.8\n", ver)
+	if !goVersion.AtLeast(GoVersion{1, 12, 0}) {
+		die("Go version (%v) is too old, restic requires Go >= 1.12\n", goVersion)
+	}
+
+	if !goVersion.AtLeast(config.MinVersion) {
+		fmt.Fprintf(os.Stderr, "%s detected, this program requires at least %s\n", goVersion, config.MinVersion)
 		os.Exit(1)
 	}
 
-	buildTags := []string{}
+	buildTags := config.DefaultBuildTags
 
 	skipNext := false
 	params := os.Args[1:]
 
-	targetGOOS := runtime.GOOS
-	targetGOARCH := runtime.GOARCH
+	env := map[string]string{
+		"GO111MODULE": "on", // make sure we build in Module mode
+		"GOOS":        runtime.GOOS,
+		"GOARCH":      runtime.GOARCH,
+		"GOARM":       "",
+	}
 
 	var outputFilename string
 
@@ -326,14 +359,12 @@ func main() {
 		switch arg {
 		case "-v", "--verbose":
 			verbose = true
-		case "-k", "--keep-gopath":
-			keepGopath = true
 		case "-t", "-tags", "--tags":
 			if i+1 >= len(params) {
 				die("-t given but no tag specified")
 			}
 			skipNext = true
-			buildTags = strings.Split(params[i+1], " ")
+			buildTags = append(buildTags, strings.Split(params[i+1], " ")...)
 		case "-o", "--output":
 			skipNext = true
 			outputFilename = params[i+1]
@@ -341,12 +372,17 @@ func main() {
 			runTests = true
 		case "--enable-cgo":
 			enableCGO = true
+		case "--enable-pie":
+			enablePIE = true
 		case "--goos":
 			skipNext = true
-			targetGOOS = params[i+1]
+			env["GOOS"] = params[i+1]
 		case "--goarch":
 			skipNext = true
-			targetGOARCH = params[i+1]
+			env["GOARCH"] = params[i+1]
+		case "--goarm":
+			skipNext = true
+			env["GOARM"] = params[i+1]
 		case "-h":
 			showUsage(os.Stdout)
 			return
@@ -357,13 +393,14 @@ func main() {
 		}
 	}
 
-	if len(buildTags) == 0 {
-		verbosePrintf("adding build-tag release\n")
-		buildTags = []string{"release"}
-	}
+	verbosePrintf("detected Go version %v\n", goVersion)
 
+	preserveSymbols := false
 	for i := range buildTags {
 		buildTags[i] = strings.TrimSpace(buildTags[i])
+		if buildTags[i] == "debug" || buildTags[i] == "profile" {
+			preserveSymbols = true
+		}
 	}
 
 	verbosePrintf("build tags: %s\n", buildTags)
@@ -373,48 +410,16 @@ func main() {
 		die("Getwd(): %v\n", err)
 	}
 
-	gopath, err := ioutil.TempDir("", fmt.Sprintf("%v-build-", config.Name))
-	if err != nil {
-		die("TempDir(): %v\n", err)
-	}
-
-	verbosePrintf("create GOPATH at %v\n", gopath)
-	if err = updateGopath(gopath, root, config.Namespace); err != nil {
-		die("copying files from %v/src to %v/src failed: %v\n", root, gopath, err)
-	}
-
-	vendor := filepath.Join(root, "vendor")
-	if directoryExists(vendor) {
-		if err = updateGopath(gopath, vendor, filepath.Join(config.Namespace, "vendor")); err != nil {
-			die("copying files from %v to %v failed: %v\n", root, gopath, err)
-		}
-	}
-
-	defer func() {
-		if !keepGopath {
-			verbosePrintf("remove %v\n", gopath)
-			if err = os.RemoveAll(gopath); err != nil {
-				die("remove GOPATH at %s failed: %v\n", err)
-			}
-		} else {
-			verbosePrintf("leaving temporary GOPATH at %v\n", gopath)
-		}
-	}()
-
 	if outputFilename == "" {
 		outputFilename = config.Name
-		if targetGOOS == "windows" {
+		if env["GOOS"] == "windows" {
 			outputFilename += ".exe"
 		}
 	}
 
-	cwd, err := os.Getwd()
-	if err != nil {
-		die("Getwd() returned %v\n", err)
-	}
 	output := outputFilename
 	if !filepath.IsAbs(output) {
-		output = filepath.Join(cwd, output)
+		output = filepath.Join(root, output)
 	}
 
 	version := getVersion()
@@ -422,16 +427,36 @@ func main() {
 	if version != "" {
 		constants["main.version"] = version
 	}
-	ldflags := "-s -w " + constants.LDFlags()
+	ldflags := constants.LDFlags()
+	if !preserveSymbols {
+		// Strip debug symbols.
+		ldflags = "-s -w " + ldflags
+	}
 	verbosePrintf("ldflags: %s\n", ldflags)
 
-	args := []string{
-		"-tags", strings.Join(buildTags, " "),
-		"-ldflags", ldflags,
-		"-o", output, config.Main,
+	var (
+		buildArgs []string
+		testArgs  []string
+	)
+
+	mainPackage := config.Main
+	if strings.HasPrefix(mainPackage, config.Namespace) {
+		mainPackage = strings.Replace(mainPackage, config.Namespace, "./", 1)
 	}
 
-	err = build(filepath.Join(gopath, "src"), targetGOOS, targetGOARCH, gopath, args...)
+	buildTarget := filepath.FromSlash(mainPackage)
+	buildCWD, err := os.Getwd()
+	if err != nil {
+		die("unable to determine current working directory: %v\n", err)
+	}
+
+	buildArgs = append(buildArgs,
+		"-tags", strings.Join(buildTags, " "),
+		"-ldflags", ldflags,
+		"-o", output, buildTarget,
+	)
+
+	err = build(buildCWD, env, buildArgs...)
 	if err != nil {
 		die("build failed: %v\n", err)
 	}
@@ -439,7 +464,9 @@ func main() {
 	if runTests {
 		verbosePrintf("running tests\n")
 
-		err = test(cwd, gopath, config.Tests...)
+		testArgs = append(testArgs, config.Tests...)
+
+		err = test(buildCWD, env, testArgs...)
 		if err != nil {
 			die("running tests failed: %v\n", err)
 		}

changelog/0.10.0_2020-09-19/issue-1570

@@ -0,0 +1,9 @@
+Enhancement: Support specifying multiple host flags for various commands
+
+Previously commands didn't take more than one `--host` or `-H` argument into account, which could be limiting with e.g.
+the `forget` command.
+
+The `dump`, `find`, `forget`, `ls`, `mount`, `restore`, `snapshots`, `stats` and `tag` commands will now take into account
+multiple `--host` and `-H` flags.
+
+https://github.com/restic/restic/issues/1570

changelog/0.10.0_2020-09-19/issue-1680

@@ -0,0 +1,8 @@
+Enhancement: Optimize `restic mount`
+
+We've optimized the FUSE implementation used within restic.
+`restic mount` is now more responsive and uses less memory.
+
+https://github.com/restic/restic/issues/1680
+https://github.com/restic/restic/pull/2587
+https://github.com/restic/restic/pull/2787

changelog/0.10.0_2020-09-19/issue-1863

@@ -0,0 +1,6 @@
+Bugfix: Report correct number of directories processed by backup
+
+The directory statistics calculation was fixed to report the actual number
+of processed directories instead of always zero.
+
+https://github.com/restic/restic/issues/1863

changelog/0.10.0_2020-09-19/issue-2072

@@ -0,0 +1,5 @@
+Enhancement: Display snapshot date when using `restic find`
+
+Added the respective snapshot date to the output of `restic find`.
+
+https://github.com/restic/restic/issues/2072

changelog/0.10.0_2020-09-19/issue-2175

@@ -0,0 +1,9 @@
+Enhancement: Allow specifying user and host when creating keys
+
+When adding a new key to the repository, the username and hostname for the new
+key can be specified on the command line. This allows overriding the defaults,
+for example if you would prefer to use the FQDN to identify the host or if you
+want to add keys for several different hosts without having to run the key add
+command on those hosts.
+
+https://github.com/restic/restic/issues/2175

changelog/0.10.0_2020-09-19/issue-2254

@@ -0,0 +1,9 @@
+Bugfix: Fix tar issues when dumping `/`
+
+We've fixed an issue with dumping either `/` or files on the first sublevel
+e.g. `/foo` to tar. This also fixes tar dumping issues on Windows where this
+issue could also happen.
+
+https://github.com/restic/restic/issues/2254
+https://github.com/restic/restic/issues/2357
+https://github.com/restic/restic/pull/2255

changelog/0.10.0_2020-09-19/issue-2277

@@ -0,0 +1,5 @@
+Enhancement: Add support for ppc64le
+
+Adds support for ppc64le, the processor architecture from IBM.
+
+https://github.com/restic/restic/issues/2277

changelog/0.10.0_2020-09-19/issue-2281

@@ -0,0 +1,7 @@
+Bugfix: Handle format verbs like '%' properly in `find` output
+
+The JSON or "normal" output of the `find` command can now deal with file names
+that contain substrings which the Golang `fmt` package considers "format verbs"
+like `%s`.
+
+https://github.com/restic/restic/issues/2281

changelog/0.10.0_2020-09-19/issue-2298

@@ -0,0 +1,8 @@
+Bugfix: Do not hang when run as a background job
+
+Restic did hang on exit while restoring the terminal configuration when it was
+started as a background job, for example using `restic ... &`. This has been
+fixed by only restoring the terminal configuration when restic is interrupted
+while reading a password from the terminal.
+
+https://github.com/restic/restic/issues/2298

changelog/0.10.0_2020-09-19/issue-2389

@@ -0,0 +1,8 @@
+Bugfix: Fix mangled json output of backup command
+
+We've fixed a race condition in the json output of the backup command
+that could cause multiple lines to get mixed up. We've also ensured that
+the backup summary is printed last.
+
+https://github.com/restic/restic/issues/2389
+https://github.com/restic/restic/pull/2545

changelog/0.10.0_2020-09-19/issue-2390

@@ -0,0 +1,5 @@
+Bugfix: Refresh lock timestamp
+
+Long-running operations did not refresh lock timestamp, resulting in locks becoming stale. This is now fixed.
+
+https://github.com/restic/restic/issues/2390

changelog/0.10.0_2020-09-19/issue-2395

@@ -0,0 +1,12 @@
+Enhancement: Ignore sync errors when operation not supported by local filesystem
+
+The local backend has been modified to work with filesystems which doesn't support
+the `sync` operation. This operation is normally used by restic to ensure that data
+files are fully written to disk before continuing.
+
+For these limited filesystems, saving a file in the backend would previously fail with
+an "operation not supported" error. This error is now ignored, which means that e.g.
+an SMB mount on macOS can now be used as storage location for a repository.
+
+https://github.com/restic/restic/issues/2395
+https://forum.restic.net/t/sync-errors-on-mac-over-smb/1859

changelog/0.10.0_2020-09-19/issue-2427

@@ -0,0 +1,7 @@
+Enhancement: Add flag `--iexclude-file` to backup command
+
+The backup command now supports the flag `--iexclude-file` which is a
+case-insensitive version of `--exclude-file`.
+
+https://github.com/restic/restic/issues/2427
+https://github.com/restic/restic/pull/2898

changelog/0.10.0_2020-09-19/issue-2429

@@ -0,0 +1,6 @@
+Bugfix: backup --json reports total_bytes_processed as 0
+
+We've fixed the json output of total_bytes_processed. The non-json output
+was already fixed with pull request #2138 but left the json output untouched.
+
+https://github.com/restic/restic/issues/2429

changelog/0.10.0_2020-09-19/issue-2469

@@ -0,0 +1,5 @@
+Bugfix: Fix incorrect bytes stats in `diff` command
+
+In some cases, the wrong number of bytes (e.g. 16777215.998 TiB) were reported by the `diff` command. This is now fixed.
+
+https://github.com/restic/restic/issues/2469

changelog/0.10.0_2020-09-19/issue-2482

@@ -0,0 +1,9 @@
+Change: Remove vendored dependencies
+
+We've removed the vendored dependencies (in the subdir `vendor/`). When
+building restic, the Go compiler automatically fetches the dependencies. It
+will also cryptographically verify that the correct code has been fetched by
+using the hashes in `go.sum` (see the link to the documentation below).
+
+https://github.com/restic/restic/issues/2482
+https://golang.org/cmd/go/#hdr-Module_downloading_and_verification

changelog/0.10.0_2020-09-19/issue-2518

@@ -0,0 +1,16 @@
+Bugfix: Do not crash with Synology NAS sftp server
+
+It was found that when restic is used to store data on an sftp server on a
+Synology NAS with a relative path (one which does not start with a slash), it
+may go into an endless loop trying to create directories on the server. We've
+fixed this bug by using a function in the sftp library instead of our own
+implementation.
+
+The bug was discovered because the Synology sftp server behaves erratic with
+non-absolute path (e.g. `home/restic-repo`). This can be resolved by just using
+an absolute path instead (`/home/restic-repo`). We've also added a paragraph in
+the FAQ.
+
+https://github.com/restic/restic/issues/2518
+https://github.com/restic/restic/issues/2363
+https://github.com/restic/restic/pull/2530

changelog/0.10.0_2020-09-19/issue-2531

@@ -0,0 +1,5 @@
+Bugfix: Fix incorrect size calculation in `stats --mode restore-size` 
+
+The restore-size mode of stats was counting hard-linked files as if they were independent.
+
+https://github.com/restic/restic/issues/2531

changelog/0.10.0_2020-09-19/issue-2537

@@ -0,0 +1,5 @@
+Bugfix: Fix incorrect file counts in `stats --mode restore-size` 
+
+The restore-size mode of stats was failing to count empty directories and some files with hard links.
+
+https://github.com/restic/restic/issues/2537

changelog/0.10.0_2020-09-19/issue-2569

@@ -0,0 +1,8 @@
+Enhancement: Support excluding files by their size
+
+The `backup` command now supports the `--exclude-larger-than` option to exclude files which are
+larger than the specified maximum size. This can for example be useful to exclude unimportant
+files with a large file size.
+
+https://github.com/restic/restic/issues/2569
+https://github.com/restic/restic/pull/2914

changelog/0.10.0_2020-09-19/issue-2571

@@ -0,0 +1,16 @@
+Enhancement: Self-heal missing file parts during backup of unchanged files
+
+We've improved the resilience of restic to certain types of repository corruption.
+
+For files that are unchanged since the parent snapshot, the backup command now
+verifies that all parts of the files still exist in the repository. Parts that are
+missing, e.g. from a damaged repository, are backed up again. This verification
+was already run for files that were modified since the parent snapshot, but is
+now also done for unchanged files.
+
+Note that restic will not backup file parts that are referenced in the index but
+where the actual data is not present on disk, as this situation can only be
+detected by restic check. Please ensure that you run `restic check` regularly.
+
+https://github.com/restic/restic/issues/2571
+https://github.com/restic/restic/pull/2827

changelog/0.10.0_2020-09-19/issue-2858

@@ -0,0 +1,9 @@
+Enhancement: Support filtering snapshots by tag and path in the stats command
+
+We've added filtering snapshots by `--tag tagList` and by `--path path` to
+the `stats` command. This includes filtering of only 'latest' snapshots or
+all snapshots in a repository.
+
+https://github.com/restic/restic/issues/2858
+https://github.com/restic/restic/pull/2859
+https://forum.restic.net/t/stats-for-a-host-and-filtered-snapshots/3020

changelog/0.10.0_2020-09-19/issue-323

@@ -0,0 +1,20 @@
+Enhancement: Add command for copying snapshots between repositories
+
+We've added a copy command, allowing you to copy snapshots from one
+repository to another.
+
+Note that this process will have to read (download) and write (upload) the
+entire snapshot(s) due to the different encryption keys used on the source
+and destination repository. Also, the transferred files are not re-chunked,
+which may break deduplication between files already stored in the
+destination repo and files copied there using this command.
+
+To fully support deduplication between repositories when the copy command is
+used, the init command now supports the `--copy-chunker-params` option,
+which initializes the new repository with identical parameters for splitting
+files into chunks as an already existing repository. This allows copied
+snapshots to be equally deduplicated in both repositories.
+
+https://github.com/restic/restic/issues/323
+https://github.com/restic/restic/pull/2606
+https://github.com/restic/restic/pull/2928

changelog/0.10.0_2020-09-19/issue-551

@@ -0,0 +1,10 @@
+Enhancement: Use optimized library for hash calculation of file chunks
+
+We've switched the library used to calculate the hashes of file chunks, which
+are used for deduplication, to the optimized Minio SHA-256 implementation.
+
+Depending on the CPU it improves the hashing throughput by 10-30%. Modern x86
+CPUs with the SHA Extension should be about two to three times faster.
+
+https://github.com/restic/restic/issues/551
+https://github.com/restic/restic/pull/2709

changelog/0.10.0_2020-09-19/pull-2195

@@ -0,0 +1,23 @@
+Enhancement: Simplify and improve restore performance
+
+Significantly improves restore performance of large files (i.e. 50M+):
+https://github.com/restic/restic/issues/2074
+https://forum.restic.net/t/restore-using-rclone-gdrive-backend-is-slow/1112/8
+https://forum.restic.net/t/degraded-restore-performance-s3-backend/1400
+
+Fixes "not enough cache capacity" error during restore:
+https://github.com/restic/restic/issues/2244
+
+NOTE: This new implementation does not guarantee order in which blobs
+are written to the target files and, for example, the last blob of a
+file can be written to the file before any of the preceeding file blobs.
+It is therefore possible to have gaps in the data written to the target
+files if restore fails or interrupted by the user.
+
+The implementation will try to preallocate space for the restored files
+on the filesystem to prevent file fragmentation. This ensures good read
+performance for large files, like for example VM images. If preallocating
+space is not supported by the filesystem, then this step is silently skipped.
+
+https://github.com/restic/restic/pull/2195
+https://github.com/restic/restic/pull/2893

changelog/0.10.0_2020-09-19/pull-2328

@@ -0,0 +1,8 @@
+Enhancement: Improve speed of check command
+
+We've improved the check command to traverse trees only once independent of
+whether they are contained in multiple snapshots. The check command is now much
+faster for repositories with a large number of snapshots.
+
+https://github.com/restic/restic/pull/2328
+https://github.com/restic/restic/issues/2284

changelog/0.10.0_2020-09-19/pull-2423

@@ -0,0 +1,5 @@
+Enhancement: support user@domain parsing as user
+
+Added the ability for user@domain-like users to be authenticated over SFTP servers.
+
+https://github.com/restic/restic/pull/2423

changelog/0.10.0_2020-09-19/pull-2546

@@ -0,0 +1,19 @@
+Change: Return exit code 3 when failing to backup all source data
+
+The backup command used to return a zero exit code as long as a snapshot
+could be created successfully, even if some of the source files could not
+be read (in which case the snapshot would contain the rest of the files).
+
+This made it hard for automation/scripts to detect failures/incomplete
+backups by looking at the exit code. Restic now returns the following exit
+codes for the backup command:
+
+ - 0 when the command was successful
+ - 1 when there was a fatal error (no snapshot created)
+ - 3 when some source data could not be read (incomplete snapshot created)
+
+https://github.com/restic/restic/pull/2546
+https://github.com/restic/restic/issues/956
+https://github.com/restic/restic/issues/2064
+https://github.com/restic/restic/issues/2526
+https://github.com/restic/restic/issues/2364

changelog/0.10.0_2020-09-19/pull-2576

@@ -0,0 +1,9 @@
+Enhancement: Improve the chunking algorithm
+
+We've updated the chunker library responsible for splitting files into smaller
+blocks. It should improve the chunking throughput by 5-15% depending on the
+CPU.
+
+https://github.com/restic/restic/pull/2576
+https://github.com/restic/restic/pull/2845
+https://github.com/restic/restic/issues/2820

changelog/0.10.0_2020-09-19/pull-2592

@@ -0,0 +1,6 @@
+Bugfix: SFTP backend supports IPv6 addresses
+
+The SFTP backend now supports IPv6 addresses natively, without relying on
+aliases in the external SSH configuration.
+
+https://github.com/restic/restic/pull/2592

changelog/0.10.0_2020-09-19/pull-2598

@@ -0,0 +1,6 @@
+Enhancement: Improve speed of diff command
+
+We've improved the performance of the diff command when comparing snapshots
+with similar content. It should run up to twice as fast as before.
+
+https://github.com/restic/restic/pull/2598

changelog/0.10.0_2020-09-19/pull-2599

@@ -0,0 +1,6 @@
+Enhancement: Slightly reduce memory usage of prune and stats commands
+
+The prune and the stats command kept directory identifiers in memory twice
+while searching for used blobs.
+
+https://github.com/restic/restic/pull/2599

changelog/0.10.0_2020-09-19/pull-2600

@@ -0,0 +1,14 @@
+Change: Update dependencies, require Go >= 1.13
+
+Restic now requires Go to be at least 1.13. This allows simplifications in the
+build process and removing workarounds.
+
+This is also probably the last version of restic still supporting mounting
+repositories via fuse on macOS. The library we're using for fuse does not
+support macOS any more and osxfuse is not open source any more.
+
+https://github.com/restic/restic/pull/2600
+https://github.com/restic/restic/pull/2852
+https://github.com/restic/restic/pull/2927
+https://github.com/bazil/fuse/issues/224
+https://github.com/osxfuse/osxfuse/issues/590

changelog/0.10.0_2020-09-19/pull-2607

@@ -0,0 +1,7 @@
+Bugfix: Honor RESTIC_CACHE_DIR environment variable on Mac and Windows
+
+On Mac and Windows, the RESTIC_CACHE_DIR environment variable was ignored.
+This variable can now be used on all platforms to set the directory where
+restic stores caches.
+
+https://github.com/restic/restic/pull/2607

changelog/0.10.0_2020-09-19/pull-2668

@@ -0,0 +1,6 @@
+Bugfix: Don't abort the stats command when data blobs are missing
+
+Runing the stats command in the blobs-per-file mode on a repository with
+missing data blobs previously resulted in a crash.
+
+https://github.com/restic/restic/pull/2668

changelog/0.10.0_2020-09-19/pull-2674

@@ -0,0 +1,8 @@
+Bugfix: Add stricter prune error checks
+
+Additional checks were added to the prune command in order to improve
+resiliency to backend, hardware and/or networking issues. The checks now
+detect a few more cases where such outside factors could potentially cause
+data loss.
+
+https://github.com/restic/restic/pull/2674

changelog/0.10.0_2020-09-19/pull-2733

@@ -0,0 +1,6 @@
+Enhancement: S3 backend: Add support for WebIdentityTokenFile
+
+We've added support for EKS IAM roles for service accounts feature to the S3 backend.
+
+https://github.com/restic/restic/pull/2733
+https://github.com/restic/restic/issues/2703

changelog/0.10.0_2020-09-19/pull-2773

@@ -0,0 +1,6 @@
+Enhancement: Optimize handling of new index entries
+
+Restic now uses less memory for backups which add a lot of data, e.g. large initial backups.
+In addition, we've improved the stability in some edge cases.
+
+https://github.com/restic/restic/pull/2773

changelog/0.10.0_2020-09-19/pull-2781

@@ -0,0 +1,8 @@
+Enhancement: Reduce memory consumption of in-memory index
+
+We've improved how the index is stored in memory.
+This change can reduce memory usage for large repositories by up to 50%
+(depending on the operation).
+
+https://github.com/restic/restic/pull/2781
+https://github.com/restic/restic/pull/2812

changelog/0.10.0_2020-09-19/pull-2786

@@ -0,0 +1,6 @@
+Enhancement: Optimize `list blobs` command
+
+We've changed the implementation of `list blobs` which should be now a bit faster
+and consume almost no memory even for large repositories.
+
+https://github.com/restic/restic/pull/2786

changelog/0.10.0_2020-09-19/pull-2790

@@ -0,0 +1,6 @@
+Enhancement: Optimized file access in restic mount
+
+Reading large (> 100GiB) files from restic mountpoints is now faster,
+and the speedup is greater for larger files.
+
+https://github.com/restic/restic/pull/2790

changelog/0.10.0_2020-09-19/pull-2821

@@ -0,0 +1,8 @@
+Change: Honor the --no-lock flag in the mount command
+
+The mount command now does not lock the repository if given the
+--no-lock flag. This allows to mount repositories which are archived
+on a read only backend/filesystem.
+
+https://github.com/restic/restic/issues/1597
+https://github.com/restic/restic/pull/2821

changelog/0.10.0_2020-09-19/pull-2840

@@ -0,0 +1,7 @@
+Enhancement: Speed-up file deletion in forget, prune and rebuild-index
+
+We've sped up the file deletion for the commands forget, prune and
+rebuild-index, especially for remote repositories.
+Deletion was sequential before and is now run in parallel.
+
+https://github.com/restic/restic/pull/2840

changelog/0.10.0_2020-09-19/pull-2899

@@ -0,0 +1,9 @@
+Bugfix: Fix possible crash in the progress bar of check --read-data
+
+We've fixed a possible crash while displaying the progress bar for the
+check --read-data command. The crash occurred when the length of the
+progress bar status exceeded the terminal width, which only happened for
+very narrow terminal windows.
+
+https://github.com/restic/restic/pull/2899
+https://forum.restic.net/t/restic-rclone-pcloud-connection-issues/2963/15

changelog/0.11.0_2020-11-05/issue-1212

@@ -0,0 +1,11 @@
+Bugfix: Restore timestamps and permissions on intermediate directories
+
+When using the `--include` option of the restore command, restic restored
+timestamps and permissions only on directories selected by the include pattern.
+Intermediate directories, which are necessary to restore files located in sub-
+directories, were created with default permissions. We've fixed the restore
+command to restore timestamps and permissions for these directories as well.
+
+https://github.com/restic/restic/issues/1212
+https://github.com/restic/restic/issues/1402
+https://github.com/restic/restic/pull/2906

changelog/0.11.0_2020-11-05/issue-1756

@@ -0,0 +1,15 @@
+Bugfix: Mark repository files as read-only when using the local backend
+
+Files stored in a local repository were marked as writeable on the
+filesystem for non-Windows systems, which did not prevent accidental file
+modifications outside of restic. In addition, the local backend did not work
+with certain filesystems and network mounts which do not permit modifications
+of file permissions.
+
+restic now marks files stored in a local repository as read-only on the
+filesystem on non-Windows systems. The error handling is improved to support
+more filesystems.
+
+https://github.com/restic/restic/issues/1756
+https://github.com/restic/restic/issues/2157
+https://github.com/restic/restic/pull/2989

changelog/0.11.0_2020-11-05/issue-2241

@@ -0,0 +1,10 @@
+Bugfix: Hide password in REST backend repository URLs
+
+When using a password in the REST backend repository URL,
+the password could in some cases be included in the output
+from restic, e.g. when initializing a repo or during an error.
+
+The password is now replaced with "***" where applicable.
+
+https://github.com/restic/restic/issues/2241
+https://github.com/restic/restic/pull/2658

changelog/0.11.0_2020-11-05/issue-2319

@@ -0,0 +1,12 @@
+Bugfix: Correctly dump directories into tar files
+
+The dump command previously wrote directories in a tar file in a way which
+can cause compatibility problems. This caused, for example, 7zip on Windows
+to not open tar files containing directories. In addition it was not possible
+to dump directories with extended attributes. These compatibility problems
+are now corrected.
+
+In addition, a tar file now includes the name of the owner and group of a file.
+
+https://github.com/restic/restic/issues/2319
+https://github.com/restic/restic/pull/3039

changelog/0.11.0_2020-11-05/issue-2491

@@ -0,0 +1,9 @@
+Bugfix: Don't require `self-update --output` placeholder file
+
+`restic self-update --output /path/to/new-restic` used to require that
+new-restic was an existing file, to be overwritten. Now it's possible
+to download an updated restic binary to a new path, without first
+having to create a placeholder file.
+
+https://github.com/restic/restic/issues/2491
+https://github.com/restic/restic/pull/2937

changelog/0.11.0_2020-11-05/issue-2834

@@ -0,0 +1,7 @@
+Bugfix: Fix rare cases of backup command hanging forever
+
+We've fixed an issue with the backup progress reporting which could cause
+restic to hang forever right before finishing a backup.
+
+https://github.com/restic/restic/issues/2834
+https://github.com/restic/restic/pull/2963

changelog/0.11.0_2020-11-05/issue-2938

@@ -0,0 +1,6 @@
+Bugfix: Fix manpage formatting
+
+The manpage formatting in restic v0.10.0 was garbled, which is fixed now.
+
+https://github.com/restic/restic/issues/2938
+https://github.com/restic/restic/pull/2977

changelog/0.11.0_2020-11-05/issue-2942

@@ -0,0 +1,7 @@
+Bugfix: Make --exclude-larger-than handle disappearing files
+
+There was a small bug in the backup command's --exclude-larger-than
+option where files that disappeared between scanning and actually
+backing them up to the repository caused a panic. This is now fixed.
+
+https://github.com/restic/restic/issues/2942

changelog/0.11.0_2020-11-05/issue-2951

@@ -0,0 +1,9 @@
+Bugfix: restic generate, help and self-update no longer check passwords
+
+The commands `restic cache`, `generate`, `help` and `self-update` don't need
+passwords, but they previously did run the RESTIC_PASSWORD_COMMAND (if set in
+the environment), prompting users to authenticate for no reason. They now skip
+running the password command.
+
+https://github.com/restic/restic/issues/2951
+https://github.com/restic/restic/pull/2987

changelog/0.11.0_2020-11-05/issue-2969

@@ -0,0 +1,9 @@
+Enhancement: Optimize check for unchanged files during backup
+
+During a backup restic skips processing files which have not changed since the last backup run.
+Previously this required opening each file once which can be slow on network filesystems. The
+backup command now checks for file changes before opening a file. This considerably reduces
+the time to create a backup on network filesystems.
+
+https://github.com/restic/restic/issues/2969
+https://github.com/restic/restic/pull/2970

changelog/0.11.0_2020-11-05/issue-2979

@@ -0,0 +1,9 @@
+Bugfix: Make snapshots --json output [] instead of null when no snapshots
+
+Restic previously output `null` instead of `[]` for the `--json snapshots`
+command, when there were no snapshots in the repository. This caused some
+minor problems when parsing the output, but is now fixed such that `[]` is
+output when the list of snapshots is empty.
+
+https://github.com/restic/restic/issues/2979
+https://github.com/restic/restic/pull/2984

changelog/0.11.0_2020-11-05/issue-340

@@ -0,0 +1,12 @@
+Enhancement: Add support for Volume Shadow Copy Service (VSS) on Windows
+
+Volume Shadow Copy Service allows read access to files that are locked by
+another process using an exclusive lock through a filesystem snapshot. Restic
+was unable to backup those files before. This update enables backing up these
+files.
+
+This needs to be enabled explicitely using the --use-fs-snapshot option of the
+backup command.
+
+https://github.com/restic/restic/issues/340
+https://github.com/restic/restic/pull/2274

changelog/0.11.0_2020-11-05/pull-2849

@@ -0,0 +1,7 @@
+Enhancement: Authenticate to Google Cloud Storage with access token
+
+When using the GCS backend, it is now possible to authenticate with OAuth2
+access tokens instead of a credentials file by setting the GOOGLE_ACCESS_TOKEN
+environment variable.
+
+https://github.com/restic/restic/pull/2849

changelog/0.11.0_2020-11-05/pull-2910

@@ -0,0 +1,10 @@
+Enhancement: New option --repository-file
+
+We've added a new command-line option --repository-file as an alternative
+to -r. This allows to read the repository URL from a file in order to
+prevent certain types of information leaks, especially for URLs containing
+credentials.
+
+https://github.com/restic/restic/issues/1458
+https://github.com/restic/restic/issues/2900
+https://github.com/restic/restic/pull/2910

changelog/0.11.0_2020-11-05/pull-2978

@@ -0,0 +1,8 @@
+Enhancement: Warn if parent snapshot cannot be loaded during backup
+
+During a backup restic uses the parent snapshot to check whether a file was
+changed and has to be backed up again. For this check the backup has to read
+the directories contained in the old snapshot. If a tree blob cannot be
+loaded, restic now warns about this problem with the backup repository.
+
+https://github.com/restic/restic/pull/2978

changelog/0.12.0_2021-02-14/issue-1681

@@ -0,0 +1,10 @@
+Bugfix: Make `mount` not create missing mount point directory
+
+When specifying a non-existent directory as mount point for the `mount`
+command, restic used to create the specified directory automatically.
+
+This has now changed such that restic instead gives an error when the
+specified directory for the mount point does not exist.
+
+https://github.com/restic/restic/issues/1681
+https://github.com/restic/restic/pull/3008

changelog/0.12.0_2021-02-14/issue-1800

@@ -0,0 +1,8 @@
+Bugfix: Ignore `no data available` filesystem error during backup
+
+Restic was unable to backup files on some filesystems, for example certain
+configurations of CIFS on Linux which return a `no data available` error
+when reading extended attributes. These errors are now ignored.
+
+https://github.com/restic/restic/issues/1800
+https://github.com/restic/restic/pull/3034

changelog/0.12.0_2021-02-14/issue-2186

@@ -0,0 +1,8 @@
+Enhancement: Allow specifying percentage in `check --read-data-subset`
+
+We've enhanced the `check` command's `--read-data-subset` option to also accept
+a percentage (e.g. `2.5%` or `10%`). This will check the given percentage of
+pack files (which are randomly selected on each run).
+
+https://github.com/restic/restic/issues/2186
+https://github.com/restic/restic/pull/3038

changelog/0.12.0_2021-02-14/issue-2453

@@ -0,0 +1,14 @@
+Enhancement: Report permanent/fatal backend errors earlier
+
+When encountering errors in reading from or writing to storage backends,
+restic retries the failing operation up to nine times (for a total of ten
+attempts). It used to retry all backend operations, but now detects some
+permanent error conditions so that it can report fatal errors earlier.
+
+Permanent failures include local disks being full, SSH connections
+dropping and permission errors.
+
+https://github.com/restic/restic/issues/2453
+https://github.com/restic/restic/pull/3170
+https://github.com/restic/restic/issues/3180
+https://github.com/restic/restic/pull/3181

changelog/0.12.0_2021-02-14/issue-2528

@@ -0,0 +1,21 @@
+Enhancement: Add Alibaba/Aliyun OSS support in the `s3` backend
+
+A new extended option `s3.bucket-lookup` has been added to support
+Alibaba/Aliyun OSS in the `s3` backend. The option can be set to one
+of the following values:
+
+- `auto` - Existing behaviour
+- `dns` - Use DNS style bucket access
+- `path` - Use path style bucket access
+
+To make the `s3` backend work with Alibaba/Aliyun OSS you must set
+`s3.bucket-lookup` to `dns` and set the `s3.region` parameter. For
+example:
+
+    restic -o s3.bucket-lookup=dns -o s3.region=oss-eu-west-1 -r s3:https://oss-eu-west-1.aliyuncs.com/bucketname init
+
+Note that `s3.region` must be set, otherwise the MinIO SDK tries to
+look it up and it seems that Alibaba doesn't support that properly.
+
+https://github.com/restic/restic/issues/2528
+https://github.com/restic/restic/pull/2535

changelog/0.12.0_2021-02-14/issue-2563

@@ -0,0 +1,9 @@
+Bugfix: Report the correct owner of directories in FUSE mounts
+
+Restic 0.10.0 changed the FUSE mount to always report the current user
+as the owner of directories within the FUSE mount, which is incorrect.
+
+This is now changed back to reporting the correct owner of a directory.
+
+https://github.com/restic/restic/issues/2563
+https://github.com/restic/restic/pull/3141

changelog/0.12.0_2021-02-14/issue-2688

@@ -0,0 +1,31 @@
+Bugfix: Make `backup` and `tag` commands separate tags by comma
+
+Running `restic backup --tag foo,bar` previously created snapshots with one
+single tag containing a comma (`foo,bar`) instead of two tags (`foo`, `bar`).
+
+Similarly, the `tag` command's `--set`, `--add` and `--remove` options would
+treat `foo,bar` as one tag instead of two tags. This was inconsistent with
+other commands and often unexpected when one intended `foo,bar` to mean two
+tags.
+
+To be consistent in all commands, restic now interprets `foo,bar` to mean two
+separate tags (`foo` and `bar`) instead of one tag (`foo,bar`) everywhere,
+including in the `backup` and `tag` commands.
+
+NOTE: This change might result in unexpected behavior in cases where you use
+the `forget` command and filter on tags like `foo,bar`. Snapshots previously
+backed up with `--tag foo,bar` will still not match that filter, but snapshots
+saved from now on will match that filter.
+
+To replace `foo,bar` tags with `foo` and `bar` tags in old snapshots, you can
+first generate a list of the relevant snapshots using a command like:
+
+    restic snapshots --json --quiet | jq '.[] | select(contains({tags: ["foo,bar"]})) | .id'
+
+and then use `restic tag --set foo --set bar snapshotID [...]` to set the new
+tags. Please adjust the commands to include real tag names and any additional
+tags, as well as the list of snapshots to process.
+
+https://github.com/restic/restic/issues/2688
+https://github.com/restic/restic/pull/2690
+https://github.com/restic/restic/pull/3197

changelog/0.12.0_2021-02-14/issue-2706

@@ -0,0 +1,17 @@
+Enhancement: Configurable progress reports for non-interactive terminals
+
+The `backup`, `check` and `prune` commands never printed any progress
+reports on non-interactive terminals. This behavior is now configurable
+using the `RESTIC_PROGRESS_FPS` environment variable. Use for example a
+value of `1` for an update every second, or `0.01666` for an update every
+minute.
+
+The `backup` command now also prints the current progress when restic
+receives a `SIGUSR1` signal.
+
+Setting the `RESTIC_PROGRESS_FPS` environment variable or sending a `SIGUSR1`
+signal prints a status report even when `--quiet` was specified.
+
+https://github.com/restic/restic/issues/2706
+https://github.com/restic/restic/issues/3194
+https://github.com/restic/restic/pull/3199

changelog/0.12.0_2021-02-14/issue-2739

@@ -0,0 +1,5 @@
+Bugfix: Make the `cat` command respect the `--no-lock` option
+
+The `cat` command would not respect the `--no-lock` flag. This is now fixed.
+
+https://github.com/restic/restic/issues/2739

changelog/0.12.0_2021-02-14/issue-2944

@@ -0,0 +1,13 @@
+Enhancement: Add `backup` options `--files-from-{verbatim,raw}`
+
+The new `backup` options `--files-from-verbatim` and `--files-from-raw` read a
+list of files to back up from a file. Unlike the existing `--files-from`
+option, these options do not interpret the listed filenames as glob patterns;
+instead, whitespace in filenames is preserved as-is and no pattern expansion is
+done. Please see the documentation for specifics.
+
+These new options are highly recommended over `--files-from`, when using a
+script to generate the list of files to back up.
+
+https://github.com/restic/restic/issues/2944
+https://github.com/restic/restic/issues/3013

changelog/0.12.0_2021-02-14/issue-3083

@@ -0,0 +1,18 @@
+Enhancement: Allow usage of deprecated S3 `ListObjects` API
+
+Some S3 API implementations, e.g. Ceph before version 14.2.5, have a broken
+`ListObjectsV2` implementation which causes problems for restic when using
+their API endpoints. When a broken server implementation is used, restic prints
+errors similar to the following:
+
+    List() returned error: Truncated response should have continuation token set
+
+As a temporary workaround, restic now allows using the older `ListObjects`
+endpoint by setting the `s3.list-objects-v1` extended option, for instance:
+
+    restic -o s3.list-objects-v1=true snapshots
+
+Please note that this option may be removed in future versions of restic.
+
+https://github.com/restic/restic/issues/3083
+https://github.com/restic/restic/pull/3085

changelog/0.12.0_2021-02-14/issue-3090

@@ -0,0 +1,10 @@
+Bugfix: The `--use-fs-snapshot` option now works on windows/386
+
+Restic failed to create VSS snapshots on windows/386 with the following error:
+
+    GetSnapshotProperties() failed: E_INVALIDARG (0x80070057)
+
+This is now fixed.
+
+https://github.com/restic/restic/issues/3087
+https://github.com/restic/restic/pull/3090

changelog/0.12.0_2021-02-14/issue-3095

@@ -0,0 +1,17 @@
+Change: Deleting files on Google Drive now moves them to the trash
+
+When deleting files on Google Drive via the `rclone` backend, restic used to
+bypass the trash folder required that one used the `-o rclone.args` option to
+enable usage of the trash folder. This ensured that deleted files in Google
+Drive were not kept indefinitely in the trash folder. However, since Google
+Drive's trash retention policy changed to deleting trashed files after 30 days,
+this is no longer needed.
+
+Restic now leaves it up to rclone and its configuration to use or not use the
+trash folder when deleting files. The default is to use the trash folder, as
+of rclone 1.53.2. To re-enable the restic 0.11 behavior, set the
+`RCLONE_DRIVE_USE_TRASH` environment variable or change the rclone
+configuration. See the rclone documentation for more details.
+
+https://github.com/restic/restic/issues/3095
+https://github.com/restic/restic/pull/3102

changelog/0.12.0_2021-02-14/issue-3100

@@ -0,0 +1,10 @@
+Bugfix: Do not require gs bucket permissions when running `init`
+
+Restic used to require bucket level permissions for the `gs` backend 
+in order to initialize a restic repository.
+
+It now allows a `gs` service account to initialize a repository if the
+bucket does exist and the service account has permissions to write/read
+to that bucket.
+
+https://github.com/restic/restic/issues/3100

changelog/0.12.0_2021-02-14/issue-3111

@@ -0,0 +1,9 @@
+Bugfix: Correctly detect output redirection for `backup` command on Windows
+
+On Windows, since restic 0.10.0 the `backup` command did not properly detect
+when the output was redirected to a file. This caused restic to output
+terminal control characters. This has been fixed by correcting the terminal
+detection.
+
+https://github.com/restic/restic/issues/3111
+https://github.com/restic/restic/pull/3150

changelog/0.12.0_2021-02-14/issue-3147

@@ -0,0 +1,11 @@
+Enhancement: Support additional environment variables for Swift authentication
+
+The `swift` backend now supports the following additional environment variables
+for passing authentication details to restic:
+`OS_USER_ID`, `OS_USER_DOMAIN_ID`, `OS_PROJECT_DOMAIN_ID` and `OS_TRUST_ID`
+
+Depending on the `openrc` configuration file these might be required when the
+user and project domains differ from one another.
+
+https://github.com/restic/restic/issues/3147
+https://github.com/restic/restic/pull/3158

changelog/0.12.0_2021-02-14/issue-3151

@@ -0,0 +1,9 @@
+Bugfix: Don't create invalid snapshots when `backup` is interrupted
+
+When canceling a backup run at a certain moment it was possible that
+restic created a snapshot with an invalid "null" tree. This caused
+`check` and other operations to fail. The `backup` command now properly
+handles interruptions and never saves a snapshot when interrupted.
+
+https://github.com/restic/restic/issues/3151
+https://github.com/restic/restic/pull/3164

changelog/0.12.0_2021-02-14/issue-3166

@@ -0,0 +1,9 @@
+Bugfix: Improve error handling in the `restore` command
+
+The `restore` command used to not print errors while downloading file contents
+from the repository. It also incorrectly exited with a zero error code even
+when there were errors during the restore process. This has all been fixed and
+`restore` now returns with a non-zero exit code when there's an error.
+
+https://github.com/restic/restic/issues/3166
+https://github.com/restic/restic/pull/3207

changelog/0.12.0_2021-02-14/issue-3191

@@ -0,0 +1,8 @@
+Enhancement: Add release binaries for MIPS architectures
+
+We've added a few new architectures for Linux to the release binaries: `mips`,
+`mipsle`, `mips64`, and `mip64le`. MIPS is mostly used for low-end embedded
+systems.
+
+https://github.com/restic/restic/issues/3191
+https://github.com/restic/restic/pull/3208

changelog/0.12.0_2021-02-14/issue-3232

@@ -0,0 +1,11 @@
+Bugfix: Correct statistics for overlapping targets
+
+A user reported that restic's statistics and progress information during backup
+was not correctly calculated when the backup targets (files/dirs to save)
+overlap. For example, consider a directory `foo` which contains (among others)
+a file `foo/bar`. When `restic backup foo foo/bar` was run, restic counted the
+size of the file `foo/bar` twice, so the completeness percentage as well as the
+number of files was wrong. This is now corrected.
+
+https://github.com/restic/restic/issues/3232
+https://github.com/restic/restic/pull/3243