wip

Fix find, do not skip some snapshots

.envrc

@@ -1 +0,0 @@
-GOPATH=$PWD:$PWD/vendor

.github/ISSUE_TEMPLATE.md

@@ -1,25 +1,79 @@
 <!--
-NOTE: Not filling out the issue template needs a good reason, otherwise the
-issue may be closed instantly! Please take the time to help us debugging the
-problem by collecting information, even if it seems irrelevant to you. Thanks!
+
+Welcome! - We kindly ask that you:
+
+  1. Fill out the issue template below - not doing so needs a good reason.
+  2. Use the forum if you have a question rather than a bug or feature request.
+
+The forum is at: https://forum.restic.net
+
+NOTE: Not filling out the issue template needs a good reason, as otherwise it
+may take a lot longer to find the problem, not to mention it can take up a lot
+more time which can otherwise be spent on development. Please also take the
+time to help us debug the issue by collecting relevant information, even if
+it doesn't seem to be relevant to you. Thanks!
+
+The forum is a better place for questions about restic or general suggestions
+and topics, e.g. usage or documentation questions! This issue tracker is mainly
+for tracking bugs and feature requests directly relating to the development of
+the software itself, rather than the project.
+
+Thanks for understanding, and for contributing to the project!
+
 -->
 
+
 ## Output of `restic version`
 
 
-## How did you start restic exactly? (Include the complete command line)
+## How did you run restic exactly?
 
+<!--
+This section should include at least:
+
+ * The complete command line and any environment variables you used to
+   configure restic's backend access. Make sure to replace sensitive values!
+
+ * The output of the commands, what restic prints gives may give us much
+   information to diagnose the problem!
+-->
+
+## What backend/server/service did you use to store the repository?
 
-## What backend/server/service did you use?
 
 
 ## Expected behavior
 
+<!--
+Describe what you'd like restic to do differently.
+-->
 
 ## Actual behavior
 
+<!--
+In this section, please try to concentrate on observations, so only describe
+what you observed directly.
+-->
 
 ## Steps to reproduce the behavior
 
+<!--
+The more time you spend describing an easy way to reproduce the behavior (if
+this is possible), the easier it is for the project developers to fix it!
+-->
 
 ## Do you have any idea what may have caused this?
+
+
+
+## Do you have an idea how to solve the issue?
+
+
+
+## Did restic help you or made you happy in any way?
+
+<!--
+Answering this question is not required, but if you have anything positive to share, please do so here!
+Sometimes we get tired of reading bug reports all day and a little positive end note does wonders.
+Idea by Joey Hess, https://joeyh.name/blog/entry/two_holiday_stories/
+-->

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,31 @@
+<!--
+Thank you very much for contributing code or documentation to restic! Please
+fill out the following questions to make it easier for us to review your
+changes.
+
+You do not need to check all the boxes below all at once, feel free to take
+your time and add more commits. If you're done and ready for review, please
+check the last box.
+-->
+
+### What is the purpose of this change? What does it change?
+
+<!--
+Describe the changes here, as detailed as needed.
+-->
+
+### Was the change discussed in an issue or in the forum before?
+
+<!--
+Link issues and relevant forum posts here.
+-->
+
+### Checklist
+
+- [ ] I have read the [Contribution Guidelines](https://github.com/restic/restic/blob/master/CONTRIBUTING.md#providing-patches)
+- [ ] I have added tests for all changes in this PR
+- [ ] I have added documentation for the changes (in the manual)
+- [ ] There's a new file in `changelog/unreleased/` that describes the changes for our users (template [here](https://github.com/restic/restic/blob/master/changelog/TEMPLATE))
+- [ ] I have run `gofmt` on the code in all commits
+- [ ] All commit messages are formatted in the same style as [the other commits in the repo](https://github.com/restic/restic/blob/master/CONTRIBUTING.md#git-commits)
+- [ ] I'm done, this Pull Request is ready for review

.gitignore

@@ -1,6 +1,3 @@
-/pkg
-/bin
 /restic
 /.vagrant
-/vendor/pkg
 /doc/_build

.travis.yml

@@ -1,35 +1,20 @@
 language: go
 sudo: false
 
-go:
-  - 1.7.6
-  - 1.8.3
-  - tip
-
-os:
-  - linux
-  - osx
-
-env:
-  matrix:
-    RESTIC_TEST_FUSE=0
-
 matrix:
-  exclude:
-    - os: osx
-      go: 1.7.6
-    - os: osx
-      go: tip
-    - os: linux
-      go: 1.8.3
   include:
     - os: linux
-      go: 1.8.3
+      go: "1.9.x"
+      env: RESTIC_TEST_FUSE=0 RESTIC_TEST_CLOUD_BACKENDS=0 RESTIC_BUILD_SOLARIS=0
+
+    # only run fuse and cloud backends tests on Travis for the latest Go on Linux
+    - os: linux
+      go: "1.10.x"
       sudo: true
-      env:
-        RESTIC_TEST_FUSE=1
-  allow_failures:
-    - go: tip
+
+    - os: osx
+      go: "1.10.x"
+      env: RESTIC_TEST_FUSE=0 RESTIC_TEST_CLOUD_BACKENDS=0
 
 branches:
   only:

CONTRIBUTING.md

@@ -60,50 +60,35 @@ uploading it somewhere or post only the parts that are really relevant.
 Development Environment
 =======================
 
-For development you need the build tool [`gb`](https://getgb.io), it can be
-installed by running the following command:
+In order to compile restic with the `go` tool directly, it needs to be checked
+out at the right path within a `GOPATH`. The concept of a `GOPATH` is explained
+in ["How to write Go code"](https://golang.org/doc/code.html).
 
-    $ go get github.com/constabulary/gb/...
-
-The repository contains two directories with code: `src/` contains the code
-written for restic, whereas `vendor/` contains copies of libraries restic
-depends on. The libraries are managed with the `gb vendor` command.
-
-Just clone the repository, `cd` to it and run `gb build` to build the binary:
+If you do not have a directory with Go code yet, executing the following
+instructions in your shell will create one for you and check out the restic
+repo:
 
+    $ export GOPATH="$HOME/go"
+    $ mkdir -p "$GOPATH/src/github.com/restic"
+    $ cd "$GOPATH/src/github.com/restic"
     $ git clone https://github.com/restic/restic
     $ cd restic
-    $ gb build
-    [...]
-    $ bin/restic version
+
+You can then build restic as follows:
+
+    $ go build ./cmd/restic
+    $ ./restic version
     restic compiled manually
-    compiled at unknown time with go1.7
+    compiled with go1.8.3 on linux/amd64
 
 The following commands can be used to run all the tests:
 
-    $ gb test
-    ok          github.com/restic/restic        8.174s
-    [...]
+    $ go test ./cmd/... ./internal/...
 
-If you want to run your tests on Linux, OpenBSD or FreeBSD, you can use
-[vagrant](https://www.vagrantup.com/) with the provided `Vagrantfile` to
-quickly set up VMs and run the tests, e.g.:
-
-    $ vagrant up freebsd
-    [...]
-
-    $ vagrant ssh freebsd -c 'cd restic/restic; go test -v ./...'
-    [...]
-
-The default `go` tool can also be used by setting the environment variable
-`GOPATH` to the following value while being in the top level directory in the
-git repository:
-
-    $ export GOPATH=$PWD:$PWD/vendor
-
-The file `.envrc` allows automatic `GOPATH` configuration with
-[direnv](https://direnv.net/), inspect the file and then allow automatic
-configuration by running `direnv allow`.
+The repository contains two sets of directories with code: `cmd/` and
+`internal/` contain the code written for restic, whereas `vendor/` contains
+copies of libraries restic depends on. The libraries are managed with the
+[`dep`](https://github.com/golang/dep) tool.
 
 Providing Patches
 =================
@@ -122,7 +107,8 @@ down to the following steps:
 
  2. Clone the repository locally and create a new branch. If you are working on
     the code itself, please set up the development environment as described in
-    the previous section.
+    the previous section. Especially take care to place your forked repository
+    at the correct path (`src/github.com/restic/restic`) within your `GOPATH`.
 
  3. Then commit your changes as fine grained as possible, as smaller patches,
     that handle one and only one issue are easier to discuss and merge.
@@ -134,7 +120,8 @@ down to the following steps:
 
  6. You will receive comments on your code and the feature or bug that they
     address. Maybe you need to rework some minor things, in this case push new
-    commits to the branch you created for the pull request, they will be
+    commits to the branch you created for the pull request (or amend the
+    existing commit, use common sense to decide which is better), they will be
     automatically added to the pull request.
 
  7. If your pull request changes anything that users should be aware of (a
@@ -144,7 +131,7 @@ down to the following steps:
     would I need to be aware of with this change.
 
  8. Once your code looks good and passes all the tests, we'll merge it. Thanks
-    a low for your contribution!
+    a lot for your contribution!
 
 Please provide the patches for each bug or feature in a separate branch and
 open up a pull request for each.
@@ -170,7 +157,7 @@ what the tests are there for.
 Git Commits
 -----------
 
-I would be good if you could follow the same general style regarding Git
+It would be good if you could follow the same general style regarding Git
 commits as the rest of the project, this makes reviewing code, browsing the
 history and triaging bugs much easier.
 

Dockerfile

@@ -1,57 +0,0 @@
-# This Dockerfiles configures a container that is similar to the Travis CI
-# environment and can be used to run tests locally.
-#
-# build the image:
-#   docker build -t restic/test .
-#
-# run all tests and cross-compile restic:
-#   docker run --rm -v $PWD:/home/travis/restic restic/test go run run_integration_tests.go -minio minio
-#
-# run interactively:
-#   docker run --interactive --tty --rm -v $PWD:/home/travis/restic restic/test /bin/bash
-#
-# run a subset of tests:
-#   docker run --rm -v $PWD:/home/travis/restic restic/test gb test -v ./backend
-#
-# build the image for an older version of Go:
-#   docker build --build-arg GOVERSION=1.6.4 -t restic/test:go1.6.4 .
-
-FROM ubuntu:14.04
-
-ARG GOVERSION=1.8.3
-ARG GOARCH=amd64
-
-# install dependencies
-RUN apt-get update
-RUN apt-get install -y --no-install-recommends ca-certificates wget git build-essential openssh-server
-
-# add and configure user
-ENV HOME /home/travis
-RUN useradd -m -d $HOME -s /bin/bash travis
-
-# run everything below as user travis
-USER travis
-WORKDIR $HOME
-
-# download and install Go
-RUN wget -q -O /tmp/go.tar.gz https://storage.googleapis.com/golang/go${GOVERSION}.linux-${GOARCH}.tar.gz
-RUN tar xf /tmp/go.tar.gz && rm -f /tmp/go.tar.gz
-ENV GOROOT $HOME/go
-ENV GOPATH $HOME/gopath
-ENV PATH $PATH:$GOROOT/bin:$GOPATH/bin:$HOME/bin
-
-RUN mkdir -p $HOME/restic
-
-# pre-install tools, this speeds up running the tests itself
-RUN go get github.com/constabulary/gb/...
-RUN go get golang.org/x/tools/cmd/cover
-RUN go get github.com/mitchellh/gox
-RUN go get github.com/pierrre/gotestcover
-RUN mkdir $HOME/bin \
-    && wget -q -O $HOME/bin/minio https://dl.minio.io/server/minio/release/linux-${GOARCH}/minio \
-    && chmod +x $HOME/bin/minio
-
-# set TRAVIS_BUILD_DIR for integration script
-ENV TRAVIS_BUILD_DIR $HOME/restic
-
-WORKDIR $HOME/restic

GOVERNANCE.md

@@ -0,0 +1,27 @@
+# restic project governance
+
+## Overview
+
+The restic project uses a governance model commonly described as Benevolent
+Dictator For Life (BDFL). This document outlines our understanding of what this
+means. It is derived from the [i3 window manager project
+governance](https://raw.githubusercontent.com/i3/i3/next/.github/GOVERNANCE.md).
+
+## Roles
+
+* user: anyone who interacts with the restic project
+* core contributor: a handful of people who have contributed significantly to
+  the project by any means (issue triage, support, documentation, code, etc.).
+  Core contributors are recognizable via GitHub’s "Member" badge.
+* Benevolent Dictator For Life (BDFL): a single individual who makes decisions
+  when consensus cannot be reached. restic's current BDFL is [@fd0](https://github.com/fd0).
+
+## Decision making process
+
+In general, we try to reach consensus in discussions. In case consensus cannot
+be reached, the BDFL makes a decision.
+
+## Contribution process
+
+The contribution process is described in a separate document called
+[CONTRIBUTING](CONTRIBUTING.md).

Gopkg.lock

@@ -0,0 +1,255 @@
+# This file is autogenerated, do not edit; changes may be undone by the next 'dep ensure'.
+
+
+[[projects]]
+  branch = "master"
+  name = "bazil.org/fuse"
+  packages = [".","fs","fuseutil"]
+  revision = "371fbbdaa8987b715bdd21d6adc4c9b20155f748"
+
+[[projects]]
+  name = "cloud.google.com/go"
+  packages = ["compute/metadata"]
+  revision = "4b98a6370e36d7a85192e7bad08a4ebd82eac2a8"
+  version = "v0.20.0"
+
+[[projects]]
+  name = "github.com/Azure/azure-sdk-for-go"
+  packages = ["storage","version"]
+  revision = "56332fec5b308fbb6615fa1af6117394cdba186d"
+  version = "v15.0.0"
+
+[[projects]]
+  name = "github.com/Azure/go-autorest"
+  packages = ["autorest","autorest/adal","autorest/azure","autorest/date"]
+  revision = "ed4b7f5bf1ec0c9ede1fda2681d96771282f2862"
+  version = "v10.4.0"
+
+[[projects]]
+  name = "github.com/cenkalti/backoff"
+  packages = ["."]
+  revision = "2ea60e5f094469f9e65adb9cd103795b73ae743e"
+  version = "v2.0.0"
+
+[[projects]]
+  name = "github.com/cpuguy83/go-md2man"
+  packages = ["md2man"]
+  revision = "20f5889cbdc3c73dbd2862796665e7c465ade7d1"
+  version = "v1.0.8"
+
+[[projects]]
+  name = "github.com/dgrijalva/jwt-go"
+  packages = ["."]
+  revision = "06ea1031745cb8b3dab3f6a236daf2b0aa468b7e"
+  version = "v3.2.0"
+
+[[projects]]
+  branch = "master"
+  name = "github.com/dustin/go-humanize"
+  packages = ["."]
+  revision = "bb3d318650d48840a39aa21a027c6630e198e626"
+
+[[projects]]
+  name = "github.com/elithrar/simple-scrypt"
+  packages = ["."]
+  revision = "d150773194090feb6c897805a7bcea8d49544e2c"
+  version = "v1.3.0"
+
+[[projects]]
+  name = "github.com/go-ini/ini"
+  packages = ["."]
+  revision = "6333e38ac20b8949a8dd68baa3650f4dee8f39f0"
+  version = "v1.33.0"
+
+[[projects]]
+  name = "github.com/golang/protobuf"
+  packages = ["proto"]
+  revision = "925541529c1fa6821df4e44ce2723319eb2be768"
+  version = "v1.0.0"
+
+[[projects]]
+  name = "github.com/google/go-cmp"
+  packages = ["cmp","cmp/internal/diff","cmp/internal/function","cmp/internal/value"]
+  revision = "8099a9787ce5dc5984ed879a3bda47dc730a8e97"
+  version = "v0.1.0"
+
+[[projects]]
+  name = "github.com/inconshreveable/mousetrap"
+  packages = ["."]
+  revision = "76626ae9c91c4f2a10f34cad8ce83ea42c93bb75"
+  version = "v1.0"
+
+[[projects]]
+  name = "github.com/juju/ratelimit"
+  packages = ["."]
+  revision = "59fac5042749a5afb9af70e813da1dd5474f0167"
+  version = "1.0.1"
+
+[[projects]]
+  branch = "master"
+  name = "github.com/kr/fs"
+  packages = ["."]
+  revision = "2788f0dbd16903de03cb8186e5c7d97b69ad387b"
+
+[[projects]]
+  name = "github.com/kurin/blazer"
+  packages = ["b2","base","internal/b2assets","internal/b2types","internal/blog","x/window"]
+  revision = "318e9768bf9a0fe52a64b9f8fe74f4f5caef6452"
+  version = "v0.4.4"
+
+[[projects]]
+  name = "github.com/marstr/guid"
+  packages = ["."]
+  revision = "8bd9a64bf37eb297b492a4101fb28e80ac0b290f"
+  version = "v1.1.0"
+
+[[projects]]
+  name = "github.com/mattn/go-isatty"
+  packages = ["."]
+  revision = "0360b2af4f38e8d38c7fce2a9f4e702702d73a39"
+  version = "v0.0.3"
+
+[[projects]]
+  name = "github.com/minio/minio-go"
+  packages = [".","pkg/credentials","pkg/encrypt","pkg/policy","pkg/s3signer","pkg/s3utils","pkg/set"]
+  revision = "66252c2a3c15f7b90cc8493d497a04ac3b6e3606"
+  version = "5.0.0"
+
+[[projects]]
+  branch = "master"
+  name = "github.com/mitchellh/go-homedir"
+  packages = ["."]
+  revision = "b8bc1bf767474819792c23f32d8286a45736f1c6"
+
+[[projects]]
+  branch = "master"
+  name = "github.com/ncw/swift"
+  packages = ["."]
+  revision = "b2a7479cf26fa841ff90dd932d0221cb5c50782d"
+
+[[projects]]
+  name = "github.com/pkg/errors"
+  packages = ["."]
+  revision = "645ef00459ed84a119197bfb8d8205042c6df63d"
+  version = "v0.8.0"
+
+[[projects]]
+  name = "github.com/pkg/profile"
+  packages = ["."]
+  revision = "5b67d428864e92711fcbd2f8629456121a56d91f"
+  version = "v1.2.1"
+
+[[projects]]
+  name = "github.com/pkg/sftp"
+  packages = ["."]
+  revision = "49488377fa2f14143ba3067cf7555f60f6c7b550"
+  version = "1.5.0"
+
+[[projects]]
+  name = "github.com/pkg/xattr"
+  packages = ["."]
+  revision = "1d7b7ffe7c46974a836eb583b7452f22de1c18cf"
+  version = "v0.2.3"
+
+[[projects]]
+  name = "github.com/restic/chunker"
+  packages = ["."]
+  revision = "db83917be3b88cc307464b7d8a221c173e34a0db"
+  version = "v0.2.0"
+
+[[projects]]
+  name = "github.com/russross/blackfriday"
+  packages = ["."]
+  revision = "55d61fa8aa702f59229e6cff85793c22e580eaf5"
+  version = "v1.5.1"
+
+[[projects]]
+  name = "github.com/satori/go.uuid"
+  packages = ["."]
+  revision = "f58768cc1a7a7e77a3bd49e98cdd21419399b6a3"
+  version = "v1.2.0"
+
+[[projects]]
+  name = "github.com/sirupsen/logrus"
+  packages = ["."]
+  revision = "c155da19408a8799da419ed3eeb0cb5db0ad5dbc"
+  version = "v1.0.5"
+
+[[projects]]
+  name = "github.com/spf13/cobra"
+  packages = [".","doc"]
+  revision = "a1f051bc3eba734da4772d60e2d677f47cf93ef4"
+  version = "v0.0.2"
+
+[[projects]]
+  name = "github.com/spf13/pflag"
+  packages = ["."]
+  revision = "e57e3eeb33f795204c1ca35f56c44f83227c6e66"
+  version = "v1.0.0"
+
+[[projects]]
+  branch = "master"
+  name = "golang.org/x/crypto"
+  packages = ["argon2","blake2b","curve25519","ed25519","ed25519/internal/edwards25519","internal/chacha20","pbkdf2","poly1305","scrypt","ssh","ssh/terminal"]
+  revision = "4ec37c66abab2c7e02ae775328b2ff001c3f025a"
+
+[[projects]]
+  branch = "master"
+  name = "golang.org/x/net"
+  packages = ["context","context/ctxhttp","http2","http2/hpack","idna","lex/httplex"]
+  revision = "6078986fec03a1dcc236c34816c71b0e05018fda"
+
+[[projects]]
+  branch = "master"
+  name = "golang.org/x/oauth2"
+  packages = [".","google","internal","jws","jwt"]
+  revision = "fdc9e635145ae97e6c2cb777c48305600cf515cb"
+
+[[projects]]
+  branch = "master"
+  name = "golang.org/x/sync"
+  packages = ["errgroup"]
+  revision = "1d60e4601c6fd243af51cc01ddf169918a5407ca"
+
+[[projects]]
+  branch = "master"
+  name = "golang.org/x/sys"
+  packages = ["cpu","unix","windows"]
+  revision = "7db1c3b1a98089d0071c84f646ff5c96aad43682"
+
+[[projects]]
+  name = "golang.org/x/text"
+  packages = ["collate","collate/build","encoding","encoding/internal","encoding/internal/identifier","encoding/unicode","internal/colltab","internal/gen","internal/tag","internal/triegen","internal/ucd","internal/utf8internal","language","runes","secure/bidirule","transform","unicode/bidi","unicode/cldr","unicode/norm","unicode/rangetable"]
+  revision = "f21a4dfb5e38f5895301dc265a8def02365cc3d0"
+  version = "v0.3.0"
+
+[[projects]]
+  branch = "master"
+  name = "google.golang.org/api"
+  packages = ["gensupport","googleapi","googleapi/internal/uritemplates","storage/v1"]
+  revision = "dbbc13f71100fa6ece308335445fca6bb0dd5c2f"
+
+[[projects]]
+  name = "google.golang.org/appengine"
+  packages = [".","internal","internal/app_identity","internal/base","internal/datastore","internal/log","internal/modules","internal/remote_api","internal/urlfetch","urlfetch"]
+  revision = "150dc57a1b433e64154302bdc40b6bb8aefa313a"
+  version = "v1.0.0"
+
+[[projects]]
+  branch = "v2"
+  name = "gopkg.in/tomb.v2"
+  packages = ["."]
+  revision = "d5d1b5820637886def9eef33e03a27a9f166942c"
+
+[[projects]]
+  name = "gopkg.in/yaml.v2"
+  packages = ["."]
+  revision = "5420a8b6744d3b0345ab293f6fcba19c978f1183"
+  version = "v2.2.1"
+
+[solve-meta]
+  analyzer-name = "dep"
+  analyzer-version = 1
+  inputs-digest = "a5de339cba7570216b212439b90e1e6c384c94be8342fe7755b7cb66aa0a3440"
+  solver-name = "gps-cdcl"
+  solver-version = 1

Gopkg.toml

@@ -0,0 +1,21 @@
+
+# Gopkg.toml example
+#
+# Refer to https://github.com/golang/dep/blob/master/docs/Gopkg.toml.md
+# for detailed Gopkg.toml documentation.
+#
+# required = ["github.com/user/thing/cmd/thing"]
+# ignored = ["github.com/user/project/pkgX", "bitbucket.org/user/project/pkgA/pkgY"]
+#
+# [[constraint]]
+#   name = "github.com/user/project"
+#   version = "1.0.0"
+#
+# [[constraint]]
+#   name = "github.com/user/project2"
+#   branch = "dev"
+#   source = "github.com/myfork/project2"
+#
+# [[override]]
+#  name = "github.com/x/y"
+#  version = "2.4.0"

LICENSE

@@ -1,19 +1,21 @@
+BSD 2-Clause License
+
 Copyright (c) 2014, Alexander Neumann <alexander@bumpern.de>
 All rights reserved.
 
 Redistribution and use in source and binary forms, with or without
 modification, are permitted provided that the following conditions are met:
 
-1. Redistributions of source code must retain the above copyright notice, this
-   list of conditions and the following disclaimer.
+* Redistributions of source code must retain the above copyright notice, this
+  list of conditions and the following disclaimer.
 
-2. Redistributions in binary form must reproduce the above copyright notice,
-   this list of conditions and the following disclaimer in the documentation
-   and/or other materials provided with the distribution.
+* Redistributions in binary form must reproduce the above copyright notice,
+  this list of conditions and the following disclaimer in the documentation
+  and/or other materials provided with the distribution.
 
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR

Makefile

@@ -6,7 +6,8 @@ restic:
 	go run build.go
 
 clean:
-	rm -rf restic
+	rm -f restic
 
 test:
-	go test ./...
+	go test ./cmd/... ./internal/...
+

README.rst

@@ -1,4 +1,4 @@
-|Documentation| |Build Status| |Build status| |Report Card| |Say Thanks|
+|Documentation| |Build Status| |Build status| |Report Card| |Say Thanks| |TestCoverage|
 
 Introduction
 ------------
@@ -7,11 +7,13 @@ restic is a backup program that is fast, efficient and secure.
 
 For detailed usage and installation instructions check out the `documentation <https://restic.readthedocs.io/en/latest>`__.
 
+You can ask questions in our `Discourse forum <https://forum.restic.net>`__.
+
 Quick start
 -----------
 
 Once you've `installed
-<https://restic.readthedocs.io/en/latest/installation.html>`__ restic, start
+<https://restic.readthedocs.io/en/latest/020_installation.html>`__ restic, start
 off with creating a repository for your backups:
 
 .. code-block:: console
@@ -27,7 +29,7 @@ and add some data:
 
 .. code-block:: console
 
-    $ restic -r /tmp/backup backup ~/work
+    $ restic --repo /tmp/backup backup ~/work
     enter password for repository:
     scan [/home/user/work]
     scanned 764 directories, 1816 files in 0:00
@@ -35,7 +37,27 @@ and add some data:
     duration: 0:29, 54.47MiB/s
     snapshot 40dc1520 saved
 
-For more options check out the `manual guide <https://restic.readthedocs.io/en/latest/manual.html>`__.
+Next you can either use ``restic restore`` to restore files or use ``restic
+mount`` to mount the repository via fuse and browse the files from previous
+snapshots.
+
+For more options check out the `online documentation <https://restic.readthedocs.io/en/latest/>`__.
+
+Backends
+--------
+
+Saving a backup on the same machine is nice but not a real backup strategy.
+Therefore, restic supports the following backends for storing backups natively:
+
+- `Local directory <https://restic.readthedocs.io/en/latest/030_preparing_a_new_repo.html#local>`__
+- `sftp server (via SSH) <https://restic.readthedocs.io/en/latest/030_preparing_a_new_repo.html#sftp>`__
+- `HTTP REST server <https://restic.readthedocs.io/en/latest/030_preparing_a_new_repo.html#rest-server>`__ (`protocol <doc/100_references.rst#rest-backend>`__ `rest-server <https://github.com/restic/rest-server>`__)
+- `AWS S3 <https://restic.readthedocs.io/en/latest/030_preparing_a_new_repo.html#amazon-s3>`__ (either from Amazon or using the `Minio <https://minio.io>`__ server)
+- `OpenStack Swift <https://restic.readthedocs.io/en/latest/030_preparing_a_new_repo.html#openstack-swift>`__
+- `BackBlaze B2 <https://restic.readthedocs.io/en/latest/030_preparing_a_new_repo.html#backblaze-b2>`__
+- `Microsoft Azure Blob Storage <https://restic.readthedocs.io/en/latest/030_preparing_a_new_repo.html#microsoft-azure-blob-storage>`__
+- `Google Cloud Storage <https://restic.readthedocs.io/en/latest/030_preparing_a_new_repo.html#google-cloud-storage>`__
+- And many other services via the `rclone <https://rclone.org>`__ `Backend <https://restic.readthedocs.io/en/latest/030_preparing_a_new_repo.html#other-services-via-rclone>`__
 
 Design Principles
 -----------------
@@ -81,21 +103,23 @@ News
 ----
 
 You can follow the restic project on Twitter `@resticbackup <https://twitter.com/resticbackup>`__ or by subscribing to
-the `development blog <https://restic.github.io/blog/>`__.
+the `development blog <https://restic.net/blog/>`__.
 
 License
 -------
 
-Restic is licensed under "BSD 2-Clause License". You can find the
+Restic is licensed under `BSD 2-Clause License <https://opensource.org/licenses/BSD-2-Clause>`__. You can find the
 complete text in ``LICENSE``.
 
 .. |Documentation| image:: https://readthedocs.org/projects/restic/badge/?version=latest
    :target: https://restic.readthedocs.io/en/latest/?badge=latest
-.. |Build Status| image:: https://travis-ci.org/restic/restic.svg?branch=master
-   :target: https://travis-ci.org/restic/restic
+.. |Build Status| image:: https://travis-ci.com/restic/restic.svg?branch=master
+   :target: https://travis-ci.com/restic/restic
 .. |Build status| image:: https://ci.appveyor.com/api/projects/status/nuy4lfbgfbytw92q/branch/master?svg=true
    :target: https://ci.appveyor.com/project/fd0/restic/branch/master
 .. |Report Card| image:: https://goreportcard.com/badge/github.com/restic/restic
    :target: https://goreportcard.com/report/github.com/restic/restic
 .. |Say Thanks| image:: https://img.shields.io/badge/Say%20Thanks-!-1EAEDB.svg
    :target: https://saythanks.io/to/restic
+.. |TestCoverage| image:: https://codecov.io/gh/restic/restic/branch/master/graph/badge.svg
+   :target: https://codecov.io/gh/restic/restic

VERSION

@@ -1 +1 @@
-0.7.1
+0.9.1

Vagrantfile

@@ -1,124 +0,0 @@
-# -*- mode: ruby -*-
-# vi: set ft=ruby :
-
-GO_VERSION = '1.7'
-
-def packages_freebsd
-  return <<-EOF
-    pkg install -y git
-    pkg install -y curl
-
-    echo 'fuse_load="YES"' >> /boot/loader.conf
-    echo 'vfs.usermount=1' >> /etc/sysctl.conf
-
-    kldload fuse
-    sysctl vfs.usermount=1
-    pw groupmod operator -M vagrant
-  EOF
-end
-
-def packages_openbsd
-  return <<-EOF
-    . ~/.profile
-    pkg_add git curl bash gtar--
-    ln -sf /usr/local/bin/gtar /usr/local/bin/tar
-  EOF
-end
-
-def packages_linux
-  return <<-EOF
-    apt-get update
-    apt-get install -y git curl
-  EOF
-end
-
-def packages_darwin
-  return <<-EOF
-    ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
-    brew cask install osxfuse
-  EOF
-end
-
-def install_gimme
-  return <<-EOF
-    rm -rf /opt/gimme
-    mkdir -p /opt/gimme || true
-    git clone https://github.com/meatballhat/gimme /opt/gimme
-    perl -p -i -e 's,/bin/bash,/usr/bin/env bash,' /opt/gimme/gimme
-    ln -sf /opt/gimme/gimme /usr/bin/gimme
-  EOF
-end
-
-def prepare_user(boxname)
-  return <<-EOF
-    mkdir -p ~/go/src
-    export PATH=/usr/local/bin:$PATH
-
-    gimme #{GO_VERSION} >> ~/.profile
-    echo export 'GOPATH=/vagrant/go' >> ~/.profile
-    echo export 'PATH=$GOPATH/bin:/usr/local/bin:$PATH' >> ~/.profile
-
-    . ~/.profile
-
-    go get golang.org/x/tools/cmd/cover
-    go get github.com/constabulary/gb/...
-
-    echo
-    echo "Run:"
-    echo "  vagrant rsync #{boxname}"
-    echo "  vagrant ssh #{boxname} -c 'cd /vagrant; gb build && gb test'"
-  EOF
-end
-
-def fix_perms
-  return <<-EOF
-    chown -R vagrant /vagrant
-  EOF
-end
-
-# All Vagrant configuration is done below. The "2" in Vagrant.configure
-# configures the configuration version (we support older styles for
-# backwards compatibility). Please don't change it unless you know what
-# you're doing.
-Vagrant.configure(2) do |config|
-  # use rsync to copy content to the folder
-  config.vm.synced_folder ".", "/vagrant", :type => "rsync"
-
-  # fix permissions on synced folder
-  config.vm.provision "fix perms", :type => :shell, :inline => fix_perms
-
-  config.vm.define "linux" do |b|
-    b.vm.box = "ubuntu/trusty64"
-    b.vm.provision "packages linux", :type => :shell, :inline => packages_linux
-    b.vm.provision "install gimme",  :type => :shell, :inline => install_gimme
-    b.vm.provision "prepare user",   :type => :shell, :privileged => false, :inline => prepare_user("linux")
-
-    # fix network card
-    config.vm.provider "virtualbox" do |v|
-      v.customize ["modifyvm", :id, "--nictype1", "virtio"]
-    end
-  end
-
-  config.vm.define "freebsd" do |b|
-    b.vm.box = "geoffgarside/freebsd-10.1"
-    b.vm.provision "packages freebsd", :type => :shell, :inline => packages_freebsd
-    b.vm.provision "install gimme",  :type => :shell, :inline => install_gimme
-    b.vm.provision "prepare user",   :type => :shell, :privileged => false, :inline => prepare_user("freebsd")
-  end
-
-  config.vm.define "openbsd" do |b|
-    b.vm.box = "tmatilai/openbsd-5.6"
-    b.vm.provision "packages openbsd", :type => :shell, :inline => packages_openbsd
-    b.vm.provision "install gimme",  :type => :shell, :inline => install_gimme
-    b.vm.provision "prepare user",   :type => :shell, :privileged => false, :inline => prepare_user("openbsd")
-  end
-
-  config.vm.define "darwin" do |b|
-    #b.vm.box = "jhcook/osx-yosemite-10.10"
-    b.vm.box = "jhcook/yosemite-clitools"
-    b.vm.provision "packages darwin", :type => :shell, :privileged => false, :inline => packages_darwin
-    b.vm.provision "install gimme",  :type => :shell, :inline => install_gimme
-    b.vm.provision "prepare user",   :type => :shell, :privileged => false, :inline => prepare_user("darwin")
-  end
-
-end

appveyor.yml

@@ -17,8 +17,8 @@ init:
 
 install:
   - rmdir c:\go /s /q
-  - appveyor DownloadFile https://storage.googleapis.com/golang/go1.8.3.windows-amd64.msi
-  - msiexec /i go1.8.3.windows-amd64.msi /q
+  - appveyor DownloadFile https://dl.google.com/go/go1.10.windows-amd64.msi
+  - msiexec /i go1.10.windows-amd64.msi /q
   - go version
   - go env
   - appveyor DownloadFile http://sourceforge.netcologne.de/project/gnuwin32/tar/1.13-1/tar-1.13-1-bin.zip -FileName tar.zip

build.go

@@ -1,4 +1,33 @@
-// +build ignore
+// BSD 2-Clause License
+//
+// Copyright (c) 2016-2018, Alexander Neumann <alexander@bumpern.de>
+// All rights reserved.
+//
+// This file has been copied from the repository at:
+// https://github.com/fd0/build-go
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are met:
+//
+// * Redistributions of source code must retain the above copyright notice, this
+//   list of conditions and the following disclaimer.
+//
+// * Redistributions in binary form must reproduce the above copyright notice,
+//   this list of conditions and the following disclaimer in the documentation
+//   and/or other materials provided with the distribution.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+// FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+// +build ignore_build_go
 
 package main
 
@@ -11,28 +40,39 @@ import (
 	"path"
 	"path/filepath"
 	"runtime"
+	"strconv"
 	"strings"
 )
 
+// config contains the configuration for the program to build.
+var config = Config{
+	Name:      "restic",                              // name of the program executable and directory
+	Namespace: "github.com/restic/restic",            // subdir of GOPATH, e.g. "github.com/foo/bar"
+	Main:      "github.com/restic/restic/cmd/restic", // package name for the main package
+	Tests: []string{ // tests to run
+		"github.com/restic/restic/internal/...",
+		"github.com/restic/restic/cmd/...",
+	},
+	MinVersion: GoVersion{Major: 1, Minor: 9, Patch: 0}, // minimum Go version supported
+}
+
+// Config configures the build.
+type Config struct {
+	Name       string
+	Namespace  string
+	Main       string
+	Tests      []string
+	MinVersion GoVersion
+}
+
 var (
 	verbose    bool
 	keepGopath bool
 	runTests   bool
 	enableCGO  bool
+	enablePIE  bool
 )
 
-var config = struct {
-	Name      string
-	Namespace string
-	Main      string
-	Tests     []string
-}{
-	Name:      "restic",                           // name of the program executable and directory
-	Namespace: "",                                 // subdir of GOPATH, e.g. "github.com/foo/bar"
-	Main:      "cmds/restic",                      // package name for the main package
-	Tests:     []string{"restic/...", "cmds/..."}, // tests to run
-}
-
 // specialDir returns true if the file begins with a special character ('.' or '_').
 func specialDir(name string) bool {
 	if name == "." {
@@ -77,7 +117,12 @@ func excludePath(name string) bool {
 //               └── restic
 //                   └── foo.go
 func updateGopath(dst, src, prefix string) error {
+	verbosePrintf("copy contents of %v to %v\n", src, filepath.Join(dst, prefix))
 	return filepath.Walk(src, func(name string, fi os.FileInfo, err error) error {
+		if name == src {
+			return err
+		}
+
 		if specialDir(name) {
 			if fi.IsDir() {
 				return filepath.SkipDir
@@ -86,6 +131,10 @@ func updateGopath(dst, src, prefix string) error {
 			return nil
 		}
 
+		if err != nil {
+			return err
+		}
+
 		if fi.IsDir() {
 			return nil
 		}
@@ -126,7 +175,6 @@ func copyFile(dst, src string) error {
 	if err != nil {
 		return err
 	}
-	defer fsrc.Close()
 
 	if err = os.MkdirAll(filepath.Dir(dst), 0755); err != nil {
 		fmt.Printf("MkdirAll(%v)\n", filepath.Dir(dst))
@@ -137,17 +185,28 @@ func copyFile(dst, src string) error {
 	if err != nil {
 		return err
 	}
-	defer fdst.Close()
 
-	_, err = io.Copy(fdst, fsrc)
+	if _, err = io.Copy(fdst, fsrc); err != nil {
+		return err
+	}
+
+	if err == nil {
+		err = fsrc.Close()
+	}
+
+	if err == nil {
+		err = fdst.Close()
+	}
+
 	if err == nil {
 		err = os.Chmod(dst, fi.Mode())
 	}
+
 	if err == nil {
 		err = os.Chtimes(dst, fi.ModTime(), fi.ModTime())
 	}
 
-	return err
+	return nil
 }
 
 // die prints the message with fmt.Fprintf() to stderr and exits with an error
@@ -167,8 +226,11 @@ func showUsage(output io.Writer) {
 	fmt.Fprintf(output, "  -T     --test          run tests\n")
 	fmt.Fprintf(output, "  -o     --output        set output file name\n")
 	fmt.Fprintf(output, "         --enable-cgo    use CGO to link against libc\n")
+	fmt.Fprintf(output, "         --enable-pie    use PIE buildmode\n")
 	fmt.Fprintf(output, "         --goos value    set GOOS for cross-compilation\n")
 	fmt.Fprintf(output, "         --goarch value  set GOARCH for cross-compilation\n")
+	fmt.Fprintf(output, "         --goarm value   set GOARM for cross-compilation\n")
+	fmt.Fprintf(output, "         --tempdir dir   use a specific directory for compilation\n")
 }
 
 func verbosePrintf(message string, args ...interface{}) {
@@ -194,13 +256,28 @@ func cleanEnv() (env []string) {
 }
 
 // build runs "go build args..." with GOPATH set to gopath.
-func build(cwd, goos, goarch, gopath string, args ...string) error {
+func build(cwd string, ver GoVersion, goos, goarch, goarm, gopath string, args ...string) error {
 	a := []string{"build"}
-	a = append(a, "-asmflags", fmt.Sprintf("-trimpath=%s", gopath))
-	a = append(a, "-gcflags", fmt.Sprintf("-trimpath=%s", gopath))
+
+	if ver.AtLeast(GoVersion{1, 10, 0}) {
+		verbosePrintf("Go version is at least 1.10, using new syntax for -gcflags\n")
+		// use new prefix
+		a = append(a, "-asmflags", fmt.Sprintf("all=-trimpath=%s", gopath))
+		a = append(a, "-gcflags", fmt.Sprintf("all=-trimpath=%s", gopath))
+	} else {
+		a = append(a, "-asmflags", fmt.Sprintf("-trimpath=%s", gopath))
+		a = append(a, "-gcflags", fmt.Sprintf("-trimpath=%s", gopath))
+	}
+	if enablePIE {
+		a = append(a, "-buildmode=pie")
+	}
+
 	a = append(a, args...)
 	cmd := exec.Command("go", a...)
 	cmd.Env = append(cleanEnv(), "GOPATH="+gopath, "GOARCH="+goarch, "GOOS="+goos)
+	if goarm != "" {
+		cmd.Env = append(cmd.Env, "GOARM="+goarm)
+	}
 	if !enableCGO {
 		cmd.Env = append(cmd.Env, "CGO_ENABLED=0")
 	}
@@ -208,7 +285,7 @@ func build(cwd, goos, goarch, gopath string, args ...string) error {
 	cmd.Dir = cwd
 	cmd.Stdout = os.Stdout
 	cmd.Stderr = os.Stderr
-	verbosePrintf("go %s\n", args)
+	verbosePrintf("go %s\n", a)
 
 	return cmd.Run()
 }
@@ -289,10 +366,89 @@ func (cs Constants) LDFlags() string {
 	return strings.Join(l, " ")
 }
 
+// GoVersion is the version of Go used to compile the project.
+type GoVersion struct {
+	Major int
+	Minor int
+	Patch int
+}
+
+// ParseGoVersion parses the Go version s. If s cannot be parsed, the returned GoVersion is null.
+func ParseGoVersion(s string) (v GoVersion) {
+	if !strings.HasPrefix(s, "go") {
+		return
+	}
+
+	s = s[2:]
+	data := strings.Split(s, ".")
+	if len(data) < 2 || len(data) > 3 {
+		// invalid version
+		return GoVersion{}
+	}
+
+	var err error
+
+	v.Major, err = strconv.Atoi(data[0])
+	if err != nil {
+		return GoVersion{}
+	}
+
+	// try to parse the minor version while removing an eventual suffix (like
+	// "rc2" or so)
+	for s := data[1]; s != ""; s = s[:len(s)-1] {
+		v.Minor, err = strconv.Atoi(s)
+		if err == nil {
+			break
+		}
+	}
+
+	if v.Minor == 0 {
+		// no minor version found
+		return GoVersion{}
+	}
+
+	if len(data) >= 3 {
+		v.Patch, err = strconv.Atoi(data[2])
+		if err != nil {
+			return GoVersion{}
+		}
+	}
+
+	return
+}
+
+// AtLeast returns true if v is at least as new as other. If v is empty, true is returned.
+func (v GoVersion) AtLeast(other GoVersion) bool {
+	var empty GoVersion
+
+	// the empty version satisfies all versions
+	if v == empty {
+		return true
+	}
+
+	if v.Major < other.Major {
+		return false
+	}
+
+	if v.Minor < other.Minor {
+		return false
+	}
+
+	if v.Patch < other.Patch {
+		return false
+	}
+
+	return true
+}
+
+func (v GoVersion) String() string {
+	return fmt.Sprintf("Go %d.%d.%d", v.Major, v.Minor, v.Patch)
+}
+
 func main() {
-	ver := runtime.Version()
-	if strings.HasPrefix(ver, "go1") && ver < "go1.7" {
-		fmt.Fprintf(os.Stderr, "Go version %s detected, restic requires at least Go 1.7\n", ver)
+	ver := ParseGoVersion(runtime.Version())
+	if !ver.AtLeast(config.MinVersion) {
+		fmt.Fprintf(os.Stderr, "%s detected, this program requires at least %s\n", ver, config.MinVersion)
 		os.Exit(1)
 	}
 
@@ -303,6 +459,9 @@ func main() {
 
 	targetGOOS := runtime.GOOS
 	targetGOARCH := runtime.GOARCH
+	targetGOARM := ""
+
+	gopath := ""
 
 	var outputFilename string
 
@@ -326,16 +485,24 @@ func main() {
 		case "-o", "--output":
 			skipNext = true
 			outputFilename = params[i+1]
+		case "--tempdir":
+			skipNext = true
+			gopath = params[i+1]
 		case "-T", "--test":
 			runTests = true
 		case "--enable-cgo":
 			enableCGO = true
+		case "--enable-pie":
+			enablePIE = true
 		case "--goos":
 			skipNext = true
 			targetGOOS = params[i+1]
 		case "--goarch":
 			skipNext = true
 			targetGOARCH = params[i+1]
+		case "--goarm":
+			skipNext = true
+			targetGOARM = params[i+1]
 		case "-h":
 			showUsage(os.Stdout)
 			return
@@ -346,6 +513,8 @@ func main() {
 		}
 	}
 
+	verbosePrintf("detected Go version %v\n", ver)
+
 	if len(buildTags) == 0 {
 		verbosePrintf("adding build-tag release\n")
 		buildTags = []string{"release"}
@@ -362,19 +531,21 @@ func main() {
 		die("Getwd(): %v\n", err)
 	}
 
-	gopath, err := ioutil.TempDir("", fmt.Sprintf("%v-build-", config.Name))
-	if err != nil {
-		die("TempDir(): %v\n", err)
+	if gopath == "" {
+		gopath, err = ioutil.TempDir("", fmt.Sprintf("%v-build-", config.Name))
+		if err != nil {
+			die("TempDir(): %v\n", err)
+		}
 	}
 
 	verbosePrintf("create GOPATH at %v\n", gopath)
-	if err = updateGopath(gopath, filepath.Join(root, "src"), config.Namespace); err != nil {
+	if err = updateGopath(gopath, root, config.Namespace); err != nil {
 		die("copying files from %v/src to %v/src failed: %v\n", root, gopath, err)
 	}
 
-	vendor := filepath.Join(root, "vendor", "src")
+	vendor := filepath.Join(root, "vendor")
 	if directoryExists(vendor) {
-		if err = updateGopath(gopath, vendor, ""); err != nil {
+		if err = updateGopath(gopath, vendor, filepath.Join(config.Namespace, "vendor")); err != nil {
 			die("copying files from %v to %v failed: %v\n", root, gopath, err)
 		}
 	}
@@ -420,7 +591,7 @@ func main() {
 		"-o", output, config.Main,
 	}
 
-	err = build(filepath.Join(gopath, "src"), targetGOOS, targetGOARCH, gopath, args...)
+	err = build(filepath.Join(gopath, "src"), ver, targetGOOS, targetGOARCH, targetGOARM, gopath, args...)
 	if err != nil {
 		die("build failed: %v\n", err)
 	}

changelog/0.6.0_2017-05-29/issue-953

@@ -0,0 +1,8 @@
+Enhancement: Make `forget` consistent
+
+The `forget` command was corrected to be more consistent in which snapshots are
+to be forgotten. It is possible that the new code removes more snapshots than
+before, so please review what would be deleted by using the `--dry-run` option.
+
+https://github.com/restic/restic/pull/957
+https://github.com/restic/restic/issues/953

changelog/0.6.0_2017-05-29/issue-965

@@ -0,0 +1,11 @@
+Enhancement: Unify repository layout for all backends
+
+Up to now the s3 backend used a special repository layout. We've decided to
+unify the repository layout and implemented the default layout also for the s3
+backend. For creating a new repository on s3 with the default layout, use
+`restic -o s3.layout=default init`. For further commands the option is not
+necessary any more, restic will automatically detect the correct layout to use.
+A future version will switch to the default layout for new repositories.
+
+https://github.com/restic/restic/pull/966
+https://github.com/restic/restic/issues/965

changelog/0.6.0_2017-05-29/pull-962

@@ -0,0 +1,15 @@
+Enhancement: Improve memory and runtime for the s3 backend
+
+We've updated the library used for accessing s3, switched to using a lower
+level API and added caching for some requests. This lead to a decrease in
+memory usage and a great speedup. In addition, we added benchmark functions for
+all backends, so we can track improvements over time. The Continuous
+Integration test service we're using (Travis) now runs the s3 backend tests not
+only against a Minio server, but also against the Amazon s3 live service, so we
+should be notified of any regressions much sooner.
+
+https://github.com/restic/restic/pull/962
+https://github.com/restic/restic/pull/960
+https://github.com/restic/restic/pull/946
+https://github.com/restic/restic/pull/938
+https://github.com/restic/restic/pull/883

changelog/0.6.1_2017-06-01/issue-985

@@ -0,0 +1,8 @@
+Enhancement: Allow multiple parallel idle HTTP connections
+
+Backends based on HTTP now allow several idle connections in parallel. This
+is especially important for the REST backend, which (when used with a local
+server) may create a lot connections and exhaust available ports quickly.
+
+https://github.com/restic/restic/issues/985
+https://github.com/restic/restic/pull/986

changelog/0.6.1_2017-06-01/pull-891

@@ -0,0 +1,6 @@
+Enhancement: Remove temporary path from binary in `build.go`
+
+The `build.go` now strips the temporary directory used for compilation from
+the binary. This is the first step in enabling reproducible builds.
+
+https://github.com/restic/restic/pull/981

changelog/0.6.1_2017-06-01/pull-974

@@ -0,0 +1,7 @@
+Enhancement: Remove regular status reports
+
+Regular status report: We've removed the status report that was printed
+every 10 seconds when restic is run non-interactively. You can still force
+reporting the current status by sending a `USR1` signal to the process.
+
+https://github.com/restic/restic/pull/974

changelog/0.7.0_2017-07-01/issue-1013

@@ -0,0 +1,9 @@
+Bugfix: Switch back to using the high-level minio-go API for s3
+
+For the s3 backend we're back to using the high-level API the s3 client library
+for uploading data, a few users reported dropped connections (which the library
+will automatically retry now).
+
+https://github.com/restic/restic/issues/1013
+https://github.com/restic/restic/issues/1023
+https://github.com/restic/restic/pull/1025

changelog/0.7.0_2017-07-01/issue-1021

@@ -0,0 +1,7 @@
+Enhancement: Detect invalid backend name and print error
+
+restic now tries to detect when an invalid/unknown backend is used and
+returns an error message.
+
+https://github.com/restic/restic/issues/1021
+https://github.com/restic/restic/pull/1070

changelog/0.7.0_2017-07-01/issue-1029

@@ -0,0 +1,8 @@
+Enhancement: Remove invalid pack files when `prune` is run
+
+The `prune` command has been improved and will now remove invalid pack files,
+for example files that have not been uploaded completely because a backup was
+interrupted.
+
+https://github.com/restic/restic/issues/1029
+https://github.com/restic/restic/pull/1036

changelog/0.7.0_2017-07-01/issue-512

@@ -0,0 +1,4 @@
+Enhancement: Add Backblaze B2 backend
+
+https://github.com/restic/restic/issues/512
+https://github.com/restic/restic/pull/978

changelog/0.7.0_2017-07-01/issue-636

@@ -0,0 +1,9 @@
+Enhancement: Add dirs `tags` and `hosts` to fuse mount
+
+The fuse mount now has two more directories: `tags` contains a subdir for
+each tag, which in turn contains only the snapshots that have this tag. The
+subdir `hosts` contains a subdir for each host that has a snapshot, and the
+subdir contains the snapshots for that host.
+
+https://github.com/restic/restic/issues/636
+https://github.com/restic/restic/pull/1050

changelog/0.7.0_2017-07-01/issue-965

@@ -0,0 +1,8 @@
+Bugfix: Switch to `default` repo layout for the s3 backend
+
+The default layout for the s3 backend is now `default` (instead of `s3legacy`).
+Also, there's a new `migrate` command to convert an existing repo, it can be
+run like this: `restic migrate s3_layout`
+
+https://github.com/restic/restic/issues/965
+https://github.com/restic/restic/pull/1004

changelog/0.7.0_2017-07-01/issue-989

@@ -0,0 +1,8 @@
+Enhancement: Improve performance of the `find` command
+
+Improved performance for the `find` command: Restic recognizes paths it has
+already checked for the files in question, so the number of backend requests
+is reduced a lot.
+
+https://github.com/restic/restic/issues/989
+https://github.com/restic/restic/pull/993

changelog/0.7.0_2017-07-01/pull-975

@@ -0,0 +1,4 @@
+Enhancement: Add new backend for OpenStack Swift
+
+https://github.com/restic/restic/pull/975
+https://github.com/restic/restic/pull/648

changelog/0.7.0_2017-07-01/pull-998

@@ -0,0 +1,5 @@
+Enhancement: Improve performance of the fuse mount
+
+Listing directories which contain large files now is significantly faster.
+
+https://github.com/restic/restic/pull/998

changelog/0.7.1_2017-07-22/issue-1055

@@ -0,0 +1,10 @@
+Enhancement: Create subdirs below `data/` for local/sftp backends
+
+The local and sftp backends now create the subdirs below `data/` on
+open/init. This way, restic makes sure that they always exist. This is
+connected to an issue for the sftp server.
+
+https://github.com/restic/restic/issues/1055
+https://github.com/restic/rest-server/pull/11#issuecomment-309879710
+https://github.com/restic/restic/pull/1077
+https://github.com/restic/restic/pull/1105

changelog/0.7.1_2017-07-22/issue-1067

@@ -0,0 +1,8 @@
+Enhancement: Allow loading credentials for s3 from IAM
+
+When no S3 credentials are specified in the environment variables, restic
+now tries to load credentials from an IAM instance profile when the s3
+backend is used.
+
+https://github.com/restic/restic/issues/1067
+https://github.com/restic/restic/pull/1086

changelog/0.7.1_2017-07-22/issue-1073

@@ -0,0 +1,8 @@
+Enhancement: Add `migrate` cmd to migrate from `s3legacy` to `default` layout
+
+The `migrate` command for changing the `s3legacy` layout to the `default` layout
+for s3 backends has been improved: It can now be restarted with `restic migrate
+--force s3_layout` and automatically retries operations on error.
+
+https://github.com/restic/restic/issues/1073
+https://github.com/restic/restic/pull/1075

changelog/0.7.1_2017-07-22/issue-1081

@@ -0,0 +1,4 @@
+Enhancement: Clarify semantic for `--tasg` for the `forget` command
+
+https://github.com/restic/restic/issues/1081
+https://github.com/restic/restic/pull/1090

changelog/0.7.1_2017-07-22/pull-1080

@@ -0,0 +1,5 @@
+Enhancement: Ignore chmod() errors on filesystems which do not support it
+
+https://github.com/restic/restic/pull/1080
+https://github.com/restic/restic/pull/1112
+

changelog/0.7.1_2017-07-22/pull-1082

@@ -0,0 +1,3 @@
+Enhancement: Print stats on SIGINFO on Darwin and FreeBSD (ctrl+t)
+
+https://github.com/restic/restic/pull/1082

changelog/0.7.1_2017-07-22/pull-1115

@@ -0,0 +1,9 @@
+Bugfix: Fix `prune`, only include existing files in indexes
+
+A bug was found (and corrected) in the index rebuilding after prune, which led
+to indexes which include blobs that were not present in the repo any more.
+There were already checks in place which detected this situation and aborted
+with an error message. A new run of either `prune` or `rebuild-index` corrected
+the index files. This is now fixed and a test has been added to detect this.
+
+https://github.com/restic/restic/pull/1115

changelog/0.7.2_2017-09-13/issue-1132

@@ -0,0 +1,8 @@
+Enhancement: Make `key` command always prompt for a password
+
+The `key` command now prompts for a password even if the original password
+to access a repo has been specified via the `RESTIC_PASSWORD` environment
+variable or a password file.
+
+https://github.com/restic/restic/issues/1132
+https://github.com/restic/restic/pull/1133

changelog/0.7.2_2017-09-13/issue-1167

@@ -0,0 +1,8 @@
+Bugfix: Do not create a local repo unless `init` is used
+
+When a restic command other than `init` is used with a local repository and the
+repository directory does not exist, restic creates the directory structure.
+That's an error, only the `init` command should create the dir.
+
+https://github.com/restic/restic/issues/1167
+https://github.com/restic/restic/pull/1182

changelog/0.7.2_2017-09-13/issue-1179

@@ -0,0 +1,4 @@
+Enhancement: Resolve name conflicts, append a counter
+
+https://github.com/restic/restic/issues/1179
+https://github.com/restic/restic/pull/1209

changelog/0.7.2_2017-09-13/issue-1208

@@ -0,0 +1,7 @@
+Enhancement: Add `--compact` to `snapshots` command
+
+The option `--compact` was added to the `snapshots` command to get a better
+overview of the snapshots in a repo. It limits each snapshot to a single line.
+
+https://github.com/restic/restic/issues/1218
+https://github.com/restic/restic/pull/1223

changelog/0.7.2_2017-09-13/issue-317

@@ -0,0 +1,10 @@
+Enhancement: Add `--exclude-caches` and `--exclude-if-present`
+
+A new option `--exclude-caches` was added that allows excluding cache
+directories (that are tagged as such). This is a special case of a more generic
+option `--exclude-if-present` which excludes a directory if a file with a
+specific name (and contents) is present.
+
+https://github.com/restic/restic/issues/317
+https://github.com/restic/restic/pull/1170
+https://github.com/restic/restic/pull/1224

changelog/0.7.2_2017-09-13/issues-697

@@ -0,0 +1,4 @@
+Enhancement: Automatically generate man pages for all restic commands
+
+https://github.com/restic/restic/issues/697
+https://github.com/restic/restic/pull/1147

changelog/0.7.2_2017-09-13/pull-1044

@@ -0,0 +1,3 @@
+Enhancement: Improve `restore`, do not traverse/load excluded directories
+
+https://github.com/restic/restic/pull/1044

changelog/0.7.2_2017-09-13/pull-1061

@@ -0,0 +1,3 @@
+Enhancement: Add Dockerfile and official Docker image
+
+https://github.com/restic/restic/pull/1061

changelog/0.7.2_2017-09-13/pull-1126

@@ -0,0 +1,7 @@
+Enhancement: Use the standard Go git repository layout, use `dep` for vendoring
+
+The git repository layout was changed to resemble the layout typically used in
+Go projects, we're not using `gb` for building restic any more and vendoring
+the dependencies is now taken care of by `dep`.
+
+https://github.com/restic/restic/pull/1126

changelog/0.7.2_2017-09-13/pull-1134

@@ -0,0 +1,5 @@
+Enhancement: Add support for storing backups on Google Cloud Storage
+
+https://github.com/restic/restic/pull/1134
+https://github.com/restic/restic/pull/1052
+https://github.com/restic/restic/issues/211

changelog/0.7.2_2017-09-13/pull-1144

@@ -0,0 +1,3 @@
+Enhancement: Properly report errors when reading files with exclude patterns
+
+https://github.com/restic/restic/pull/1144

changelog/0.7.2_2017-09-13/pull-1149

@@ -0,0 +1,8 @@
+Enhancement: Add support for storing backups on Microsoft Azure Blob Storage
+
+The library we're using to access the service requires Go 1.8, so restic now
+needs at least Go 1.8.
+
+https://github.com/restic/restic/pull/1149
+https://github.com/restic/restic/pull/1059
+https://github.com/restic/restic/issues/609

changelog/0.7.2_2017-09-13/pull-1164

@@ -0,0 +1,3 @@
+Bugfix: Make the `key remove` command behave as documented
+
+https://github.com/restic/restic/pull/1164

changelog/0.7.2_2017-09-13/pull-1191

@@ -0,0 +1,8 @@
+Bugfix: Make sure to write profiling files on interrupt
+
+Since a few releases restic had the ability to write profiling files for memory
+and CPU usage when `debug` is enabled. It was discovered that when restic is
+interrupted (ctrl+c is pressed), the proper shutdown hook is not run. This is
+now corrected.
+
+https://github.com/restic/restic/pull/1191

changelog/0.7.2_2017-09-13/pull-1196

@@ -0,0 +1,3 @@
+Enhancement: Add `--group-by` to `forget` command for flexible grouping
+
+https://github.com/restic/restic/pull/1196

changelog/0.7.2_2017-09-13/pull-1203

@@ -0,0 +1,5 @@
+Enhancement: Print stats on all BSD systems when SIGINFO (ctrl+t) is received
+
+https://github.com/restic/restic/pull/1203
+https://github.com/restic/restic/pull/1082#issuecomment-326279920
+

changelog/0.7.2_2017-09-13/pull-1205

@@ -0,0 +1,3 @@
+Enhancement: Allow specifying time/date for a backup with `--time`
+
+https://github.com/restic/restic/pull/1205

changelog/0.7.3_2017-09-20/issue-1246

@@ -0,0 +1,9 @@
+Bugfix: List all files stored in Google Cloud Storage
+
+For large backups stored in Google Cloud Storage, the `prune` command fails
+because listing only returns the first 1000 files. This has been corrected, no
+data is lost in the process. In addition, a plausibility check was added to
+`prune`.
+
+https://github.com/restic/restic/issues/1246
+https://github.com/restic/restic/pull/1247

changelog/0.8.0_2017-11-26/issue-1102

@@ -0,0 +1,9 @@
+Enhancement: Add subdirectory `ids` to fuse mount
+
+The fuse mount now has an `ids` subdirectory which contains the snapshots below
+their (short) IDs.
+
+https://github.com/restic/restic/issues/1102
+https://github.com/restic/restic/pull/1299
+https://github.com/restic/restic/pull/1320
+

changelog/0.8.0_2017-11-26/issue-1114

@@ -0,0 +1,10 @@
+Enhancement: Add `--cacert` to specify TLS certificates to check against
+
+We've added the `--cacert` option which can be used to pass one (or more) CA
+certificates to restic. These are used in addition to the system CA
+certificates to verify HTTPS certificates (e.g. for the REST backend).
+
+https://github.com/restic/restic/issues/1114
+https://github.com/restic/restic/pull/1276
+
+

changelog/0.8.0_2017-11-26/issue-1216

@@ -0,0 +1,9 @@
+Enhancement: Add upload/download limiting
+
+We've added support for rate limiting through `--limit-upload` and
+`--limit-download` flags.
+
+https://github.com/restic/restic/issues/1216
+https://github.com/restic/restic/pull/1336
+https://github.com/restic/restic/pull/1358
+

changelog/0.8.0_2017-11-26/issue-1256

@@ -0,0 +1,7 @@
+Bugfix: Re-enable workaround for S3 backend
+
+We've re-enabled a workaround for `minio-go` (the library we're using to
+access s3 backends), this reduces memory usage.
+
+https://github.com/restic/restic/issues/1256
+https://github.com/restic/restic/pull/1267

changelog/0.8.0_2017-11-26/issue-1271

@@ -0,0 +1,6 @@
+Enhancement: Cache results for excludes for `backup`
+
+The `backup` command now caches the result of excludes for a directory.
+
+https://github.com/restic/restic/issues/1271
+https://github.com/restic/restic/pull/1326

changelog/0.8.0_2017-11-26/issue-1274

@@ -0,0 +1,9 @@
+Enhancement: Add `generate` command, replaces `manpage` and `autocomplete`
+
+The `generate` command has been added, which replaces the now removed
+commands `manpage` and `autocomplete`. This release of restic contains the
+most recent manpages in `doc/man` and the auto-completion files for bash and
+zsh in `doc/bash-completion.sh` and `doc/zsh-completion.zsh`
+
+https://github.com/restic/restic/issues/1274
+https://github.com/restic/restic/pull/1282

changelog/0.8.0_2017-11-26/issue-1291

@@ -0,0 +1,8 @@
+Bugfix: Reuse backend TCP connections to BackBlaze B2
+
+A bug was discovered in the library we're using to access Backblaze, it now
+reuses already established TCP connections which should be a lot faster and
+not cause network failures any more.
+
+https://github.com/restic/restic/issues/1291
+https://github.com/restic/restic/pull/1301

changelog/0.8.0_2017-11-26/issue-1367

@@ -0,0 +1,7 @@
+Enhancement: Allow comments in files read from via `--file-from`
+
+When the list of files/dirs to be saved is read from a file with
+`--files-from`, comment lines (starting with `#`) are now ignored.
+
+https://github.com/restic/restic/issues/1367
+https://github.com/restic/restic/pull/1368

changelog/0.8.0_2017-11-26/issue-1445

@@ -0,0 +1,18 @@
+Security: Prevent writing outside the target directory during restore
+
+A vulnerability was found in the restic restorer, which allowed attackers in
+special circumstances to restore files to a location outside of the target
+directory. Due to the circumstances we estimate this to be a low-risk
+vulnerability, but urge all users to upgrade to the latest version of restic.
+
+Exploiting the vulnerability requires a Linux/Unix system which saves backups
+via restic and a Windows systems which restores files from the repo. In
+addition, the attackers need to be able to create create files with arbitrary
+names which are then saved to the restic repo. For example, by creating a file
+named "..\test.txt" (which is a perfectly legal filename on Linux) and
+restoring a snapshot containing this file on Windows, it would be written to
+the parent of the target directory.
+
+We'd like to thank Tyler Spivey for reporting this responsibly!
+
+https://github.com/restic/restic/pull/1445

changelog/0.8.0_2017-11-26/issue-448

@@ -0,0 +1,9 @@
+Enhancement: sftp backend prompts for password
+
+The sftp backend now prompts for the password if a password is necessary for
+login.
+
+https://github.com/restic/restic/issues/448
+https://github.com/restic/restic/pull/1270
+
+

changelog/0.8.0_2017-11-26/issue-510

@@ -0,0 +1,7 @@
+Enhancement: Add `dump` command
+
+We've added the `dump` command which prints a file from a snapshot to
+stdout. This can e.g. be used to restore files read with `backup --stdin`.
+
+https://github.com/restic/restic/issues/510
+https://github.com/restic/restic/pull/1346

changelog/0.8.0_2017-11-26/pull-1040

@@ -0,0 +1,23 @@
+Enhancement: Add local metadata cache
+
+We've added a local cache for metadata so that restic doesn't need to load
+all metadata (snapshots, indexes, ...) from the repo each time it starts. By
+default the cache is active, but there's a new global option `--no-cache`
+that can be used to disable the cache. By deafult, the cache a standard
+cache folder for the OS, which can be overridden with `--cache-dir`.  The
+cache will automatically populate, indexes and snapshots are saved as they
+are loaded. Cache directories for repos that haven't been used recently can
+automatically be removed by restic with the `--cleanup-cache` option.
+
+A related change was to by default create pack files in the repo that contain
+either data or metadata, not both mixed together. This allows easy caching of
+only the metadata files. The next run of `restic prune` will untangle mixed
+files automatically.
+
+https://github.com/restic/restic/pull/1040
+https://github.com/restic/restic/issues/29
+https://github.com/restic/restic/issues/738
+https://github.com/restic/restic/issues/282
+https://github.com/restic/restic/pull/1287
+https://github.com/restic/restic/pull/1436
+https://github.com/restic/restic/pull/1265

changelog/0.8.0_2017-11-26/pull-1249

@@ -0,0 +1,6 @@
+Enhancement: Add `latest` symlink in fuse mount
+
+The directory structure in the fuse mount now exposes a symlink `latest`
+which points to the latest snapshot in that particular directory.
+
+https://github.com/restic/restic/pull/1249

changelog/0.8.0_2017-11-26/pull-1269

@@ -0,0 +1,6 @@
+Enhancement: Add `--compact` to `forget` command
+
+The option `--compact` was added to the `forget` command to provide the same
+compact view as the `snapshots` command.
+
+https://github.com/restic/restic/pull/1269

changelog/0.8.0_2017-11-26/pull-1281

@@ -0,0 +1,7 @@
+Enhancement: Google Cloud Storage backend needs less permissions
+
+The Google Cloud Storage backend no longer requires the service account to
+have the `storage.buckets.get` permission ("Storage Admin" role) in `restic
+init` if the bucket already exists.
+
+https://github.com/restic/restic/pull/1281

changelog/0.8.0_2017-11-26/pull-1317

@@ -0,0 +1,7 @@
+Bugfix: Run prune when `forget --prune` is called with just snapshot IDs
+
+A bug in the `forget` command caused `prune` not to be run when `--prune` was
+specified without a policy, e.g. when only snapshot IDs that should be
+forgotten are listed manually.
+
+https://github.com/restic/restic/pull/1317

changelog/0.8.0_2017-11-26/pull-1319

@@ -0,0 +1,8 @@
+Enhancement: Make `check` print `no errors found` explicitly
+
+The `check` command now explicetly prints `No errors were found` when no errors
+could be found.
+
+https://github.com/restic/restic/pull/1319
+https://github.com/restic/restic/issues/1303
+

changelog/0.8.0_2017-11-26/pull-1353

@@ -0,0 +1,3 @@
+Enhancement: Retry failed backend requests
+
+https://github.com/restic/restic/pull/1353

changelog/0.8.0_2017-11-26/pull-1437

@@ -0,0 +1,10 @@
+Bugfix: Remove implicit path `/restic` for the s3 backend
+
+The s3 backend used the subdir `restic` within a bucket if no explicit path
+after the bucket name was specified. Since this version, restic does not use
+this default path any more. If you created a repo on s3 in a bucket without
+specifying a path within the bucket, you need to add `/restic` at the end of
+the repository specification to access your repo: `s3:s3.amazonaws.com/bucket/restic`
+
+https://github.com/restic/restic/pull/1437
+https://github.com/restic/restic/issues/1292

changelog/0.8.1_2017-12-27/issue-1457

@@ -0,0 +1,4 @@
+Bugfix: Improve s3 backend with DigitalOcean Spaces
+
+https://github.com/restic/restic/issues/1457
+https://github.com/restic/restic/pull/1459

changelog/0.8.1_2017-12-27/pull-1436

@@ -0,0 +1,9 @@
+Enhancement: Add code to detect old cache directories
+
+We've added code to detect old cache directories of repositories that
+haven't been used in a long time, restic now prints a note when it detects
+that such dirs exist. Also, the option `--cleanup-cache` was added to
+automatically remove such directories. That's not a problem because the
+cache will be rebuild once a repo is accessed again.
+
+https://github.com/restic/restic/pull/1436

changelog/0.8.1_2017-12-27/pull-1439

@@ -0,0 +1,6 @@
+Enhancement: Improve cancellation logic
+
+The cancellation logic was improved, restic can now shut down cleanly when
+requested to do so (e.g. via ctrl+c).
+
+https://github.com/restic/restic/pull/1439

changelog/0.8.1_2017-12-27/pull-1452

@@ -0,0 +1,9 @@
+Change: Do not save atime by default
+
+By default, the access time for files and dirs is not saved any more. It is
+not possible to reliably disable updating the access time during a backup,
+so for the next backup the access time is different again. This means a lot
+of metadata is saved. If you want to save the access time anyway, pass
+`--with-atime` to the `backup` command.
+
+https://github.com/restic/restic/pull/1452

changelog/0.8.1_2017-12-27/pull-1454

@@ -0,0 +1,6 @@
+Bugfix: Correct cache dir location for Windows and Darwin
+
+The cache directory on Windows and Darwin was not correct, instead the
+directory `.cache` was used.
+
+https://github.com/restic/restic/pull/1454

changelog/0.8.1_2017-12-27/pull-1459

@@ -0,0 +1,9 @@
+Bugfix: Disable handling SIGPIPE
+
+We've disabled handling SIGPIPE again. Turns out, writing to broken TCP
+connections also raised SIGPIPE, so restic exits on the first write to a
+broken connection. Instead, restic should retry the request.
+
+https://github.com/restic/restic/pull/1459
+https://github.com/restic/restic/issues/1457
+https://github.com/restic/restic/issues/1466

changelog/0.8.1_2017-12-27/pull-1462

@@ -0,0 +1,8 @@
+Enhancement: Add the `diff` command
+
+The command `diff` was added, it allows comparing two snapshots and listing
+all differences.
+
+https://github.com/restic/restic/issues/11
+https://github.com/restic/restic/issues/1460
+https://github.com/restic/restic/pull/1462

changelog/0.8.2_2018-02-17/issue-1506

@@ -0,0 +1,4 @@
+Bugfix: Limit bandwith at the http.RoundTripper for HTTP based backends
+
+https://github.com/restic/restic/issues/1506
+https://github.com/restic/restic/pull/1511

changelog/0.8.2_2018-02-17/issue-1512

@@ -0,0 +1,9 @@
+Bugfix: Restore directory permissions as the last step
+
+This change allows restoring into directories that were not writable during
+backup. Before, restic created the directory, set the read-only mode and then
+failed to create files in the directory. This change now restores the directory
+(with its permissions) as the very last step.
+
+https://github.com/restic/restic/issues/1512
+https://github.com/restic/restic/pull/1536

changelog/0.8.2_2018-02-17/issue-1522

@@ -0,0 +1,8 @@
+Enhancement: Add support for TLS client certificate authentication
+
+Support has been added for using a TLS client certificate for authentication to
+HTTP based backend. A file containing the PEM encoded private key and
+certificate can be set using the `--tls-client-cert` option.
+
+https://github.com/restic/restic/issues/1522
+https://github.com/restic/restic/pull/1524

changelog/0.8.2_2018-02-17/issue-1528

@@ -0,0 +1,4 @@
+Bugfix: Correctly create missing subdirs in data/
+
+https://github.com/restic/restic/issues/1528
+https://github.com/restic/restic/pull/1529

changelog/0.8.2_2018-02-17/issue-1541

@@ -0,0 +1,7 @@
+Enhancement: Reduce number of remote requests during repository check
+
+This change eliminates redundant remote repository calls and significantly
+improves repository check time.
+
+https://github.com/restic/restic/issues/1541
+https://github.com/restic/restic/pull/1548

changelog/0.8.2_2018-02-17/issue-1567

@@ -0,0 +1,9 @@
+Enhancement: Reduce number of backend requests for rebuild-index and prune
+
+We've found a way to reduce then number of backend requests for the
+`rebuild-index` and `prune` operations. This significantly speeds up the
+operations for high-latency backends.
+
+https://github.com/restic/restic/issues/1567
+https://github.com/restic/restic/pull/1574
+https://github.com/restic/restic/pull/1575

changelog/0.8.2_2018-02-17/issue-1590

@@ -0,0 +1,7 @@
+Bugfix: Strip spaces for lines read via --files-from
+
+Leading and trailing spaces in lines read via `--files-from` are now stripped,
+so it behaves the same as with lines read via `--exclude-file`.
+
+https://github.com/restic/restic/issues/1590
+https://github.com/restic/restic/pull/1613

changelog/0.8.2_2018-02-17/pull-1507

@@ -0,0 +1,3 @@
+Enhancement: Only reload snapshots once per minute for fuse mount
+
+https://github.com/restic/restic/pull/1507

changelog/0.8.2_2018-02-17/pull-1538

@@ -0,0 +1,7 @@
+Enhancement: Reduce memory allocations for querying the index
+
+This change reduces the internal memory allocations when the index data
+structures in memory are queried if a blob (part of a file) already exists in
+the repo. It should speed up backup a bit, and maybe even reduce RAM usage.
+
+https://github.com/restic/restic/pull/1538

changelog/0.8.2_2018-02-17/pull-1549

@@ -0,0 +1,7 @@
+Enhancement: Speed up querying across indices and scanning existing files
+
+This change increases the whenever a blob (part of a file) is searched for in a
+restic repository.  This will reduce cpu usage some when backing up files already
+backed up by restic.  Cpu usage is further decreased when scanning files.
+
+https://github.com/restic/restic/pull/1549

changelog/0.8.2_2018-02-17/pull-1554

@@ -0,0 +1,7 @@
+Enhancement: fuse/mount: Correctly handle EOF, add template option
+
+We've added the `--snapshot-template` string, which can be used to specify a
+template for a snapshot directory. In addition, accessing data after the end of
+a file via the fuse mount is now handled correctly.
+
+https://github.com/restic/restic/pull/1554

changelog/0.8.2_2018-02-17/pull-1564

@@ -0,0 +1,10 @@
+Enhancement: Don't terminate ssh on SIGINT
+
+We've reworked the code which runs the `ssh` login for the sftp backend so that
+it can prompt for a password (if needed) but does not exit when the user
+presses CTRL+C (SIGINT) e.g. during backup. This allows restic to properly shut
+down when it receives SIGINT and remove the lock file from the repo, afterwards
+exiting the `ssh` process.
+
+https://github.com/restic/restic/pull/1564
+https://github.com/restic/restic/pull/1588

changelog/0.8.2_2018-02-17/pull-1579

@@ -0,0 +1,3 @@
+Enhancement: Retry Backend.List() in case of errors
+
+https://github.com/restic/restic/pull/1579

changelog/0.8.2_2018-02-17/pull-1584

@@ -0,0 +1,12 @@
+Enhancement: Limit index file size
+
+Before, restic would create a single new index file on `prune` or
+`rebuild-index`, this may lead to memory problems when this huge index is
+created and loaded again. We're now limiting the size of the index file, and
+split newly created index files into several smaller ones. This allows restic
+to be more memory-efficient.
+
+https://github.com/restic/restic/pull/1584
+https://github.com/restic/restic/issues/1412
+https://github.com/restic/restic/issues/979
+https://github.com/restic/restic/issues/526

changelog/0.8.2_2018-02-17/pull-1589

@@ -0,0 +1,17 @@
+Bugfix: Complete intermediate index upload
+
+After a user posted a comprehensive report of what he observed, we were able to
+find a bug and correct it: During backup, restic uploads so-called
+"intermediate" index files. When the backup finishes during a transfer of such
+an intermediate index, the upload is cancelled, but the backup is finished
+without an error. This leads to an inconsistent state, where the snapshot
+references data that is contained in the repo, but is not referenced in any
+index.
+
+The situation can be resolved by building a new index with `rebuild-index`, but
+looks very confusing at first. Since all the data got uploaded to the repo
+successfully, there was no risk of data loss, just minor inconvenience for our
+users.
+
+https://github.com/restic/restic/pull/1589
+https://forum.restic.net/t/error-loading-tree-check-prune-and-forget-gives-error-b2-backend/406

changelog/0.8.2_2018-02-17/pull-1594

@@ -0,0 +1,7 @@
+Bugfix: Google Cloud Storage: Use generic HTTP transport
+
+It was discovered that the Google Cloud Storage backend did not use the generic
+HTTP transport, so things such as bandwidth limiting with `--limit-upload` did
+not work. This is resolved now.
+
+https://github.com/restic/restic/pull/1594