🔀 merge branch 'release/2.0.10'

Add Doozer build badge

.doozer.json

@@ -0,0 +1,24 @@
+{
+  "targets": {
+    "xenial-i386": {
+      "buildenv": "xenial-i386",
+      "builddeps": ["build-essential", "cmake"],
+      "buildcmd": ["mkdir cm", "cd cm", "cmake ..", "cmake --build .", "ctest --output-on-failure"]
+    },
+    "xenial-amd64": {
+      "buildenv": "xenial-amd64",
+      "builddeps": ["build-essential", "cmake"],
+      "buildcmd": ["mkdir cm", "cd cm", "cmake ..", "cmake --build .", "ctest --output-on-failure"]
+    },
+    "fedora24-x86_64": {
+      "buildenv": "fedora24-x86_64",
+      "builddeps": ["cmake", "make", "clang"],
+      "buildcmd": ["mkdir cm", "cd cm", "CXX=clang++ cmake ..", "cmake --build .", "ctest --output-on-failure"]
+    },
+    "osx": {
+      "buildenv": "osx",
+      "builddeps": ["build-essential"],
+      "buildcmd": ["make check"]
+    }
+  }
+}

.github/CONTRIBUTING.md

@@ -6,6 +6,10 @@ This project started as a little excuse to exercise some of the cool new C++11 f
 
 To make it as easy as possible for you to contribute and for me to keep an overview, here are a few guidelines which should help us avoid all kinds of unnecessary work or disappointment. And of course, this document is subject to discussion, so please [create an issue](https://github.com/nlohmann/json/issues/new) or a pull request if you find a way to improve it!
 
+## Private reports
+
+Usually, all issues are tracked publicly on [Github](https://github.com/nlohmann/json/issues). If you want to make a private report (e.g., for a vulnerability or to attach an example that is not meant to be publisheed), please send an email to <mail@nlohmann.me>.
+
 ## Prerequisites
 
 Please [create an issue](https://github.com/nlohmann/json/issues/new), assuming one does not already exist, and describe your concern. Note you need a [GitHub account](https://github.com/signup/free) for this.
@@ -32,21 +36,15 @@ There are currently two files which need to be edited:
    make re2c
    ```
 
-   To run [`re2c`](http://re2c.org) and generate/overwrite file `src/json.hpp` with your changes in file `src/json.hpp.re2c`.
+   To run [`re2c`](http://re2c.org) and generate/overwrite file `src/json.hpp` with your changes in file `src/json.hpp.re2c`. We currently use re2c version 0.16. Please also use this version, because other re2c versions tend to create code that differs a lot from which makes diffs unusable.
 
 
-2. [`test/unit.cpp`](https://github.com/nlohmann/json/blob/master/test/unit.cpp) - This contains the [Catch](https://github.com/philsquared/Catch) unit tests which currently cover [100 %](https://coveralls.io/github/nlohmann/json) of the library's code.
+2. [`test/src/unit.cpp`](https://github.com/nlohmann/json/blob/master/test/unit.cpp) - This contains the [Catch](https://github.com/philsquared/Catch) unit tests which currently cover [100 %](https://coveralls.io/github/nlohmann/json) of the library's code.
 
-   If you add or change a feature, please also add a unit test to this file. The unit tests can be compiled with
+   If you add or change a feature, please also add a unit test to this file. The unit tests can be compiled and executed with
 
    ```sh
-   make
-   ```
-
-   and can be executed with
-
-   ```sh
-   ./json_unit
+   make check
    ```
 
    The test cases are also executed with several different compilers on [Travis](https://travis-ci.org/nlohmann/json) once you open a pull request.
@@ -57,22 +55,23 @@ Please understand that I cannot accept pull requests changing only file `src/jso
 ## Note
 
 - If you open a pull request, the code will be automatically tested with [Valgrind](http://valgrind.org)'s Memcheck tool to detect memory leaks. Please be aware that the execution with Valgrind _may_ in rare cases yield different behavior than running the code directly. This can result in failing unit tests which run successfully without Valgrind.
+- There is a Makefile target `make pretty` which runs [Artistic Style](http://astyle.sourceforge.net) to fix indentation. If possible, run it before opening the pull request. Otherwise, we shall run it afterward.
 
 ## Please don't
 
-- Only make changes to file `src/json.hpp` -- please read the paragraph above and understand why `src/json.hpp.re2c` exists.
+- Please do not only make changes to file `src/json.hpp` -- please read the paragraph above and understand why `src/json.hpp.re2c` exists.
 - The C++11 support varies between different **compilers** and versions. Please note the [list of supported compilers](https://github.com/nlohmann/json/blob/master/README.md#supported-compilers). Some compilers like GCC 4.8 (and earlier), Clang 3.3 (and earlier), or Microsoft Visual Studio 13.0 and earlier are known not to work due to missing or incomplete C++11 support. Please refrain from proposing changes that work around these compiler's limitations with `#ifdef`s or other means.
 - Specifically, I am aware of compilation problems with **Microsoft Visual Studio** (there even is an [issue label](https://github.com/nlohmann/json/issues?utf8=✓&q=label%3A%22visual+studio%22+) for these kind of bugs). I understand that even in 2016, complete C++11 support isn't there yet. But please also understand that I do not want to drop features or uglify the code just to make Microsoft's sub-standard compiler happy. The past has shown that there are ways to express the functionality such that the code compiles with the most recent MSVC - unfortunately, this is not the main objective of the project.
 - Please refrain from proposing changes that would **break [JSON](http://json.org) conformance**. If you propose a conformant extension of JSON to be supported by the library, please motivate this extension.
+  - We shall not extend the library to **support comments**. There is quite some [controversy](https://www.reddit.com/r/programming/comments/4v6chu/why_json_doesnt_support_comments_douglas_crockford/) around this topic, and there were quite some [issues](https://github.com/nlohmann/json/issues/376) on this. We believe that JSON is fine without comments.
+  - We do not preserve the **insertion order of object elements**. The [JSON standard](https://tools.ietf.org/html/rfc7159.html) defines objects as "an unordered collection of zero or more name/value pairs". To this end, this library does not preserve insertion order of name/value pairs. (In fact, keys will be traversed in alphabetical order as `std::map` with `std::less` is used by default.) Note this behavior conforms to the standard, and we shall not it to any other order.
+
 - Please do not open pull requests that address **multiple issues**.
 
 ## Wanted
 
 The following areas really need contribution:
 
-- Getting the code to compile without errors with the latest **Microsoft Visual Studio** version. I am not using Windows, so I cannot debug code with MSVC myself. There is a job on [AppVeyor](https://ci.appveyor.com/project/nlohmann/json) though.
-- Extending the **continuous integration** beyond Linux running some versions of GCC and Clang on [Travis](https://travis-ci.org/nlohmann/json) and Microsoft Visual Studio on [AppVeyor](https://ci.appveyor.com/project/nlohmann/json). We have found a lot of bugs just because several compilers behave in a slightly different manner.
+- Extending the **continuous integration** toward more exotic compilers such as Android NDK, Intel's Compiler, or the bleeding-edge versions of GCC or Clang.
 - Improving the efficiency of the **JSON parser**. The current parser is implemented as a naive recursive descent parser with hand coded string handling. More sophisticated approaches like LALR parsers would be really appreciated. That said, parser generators like Bison or ANTLR do not play nice with single-header files -- I really would like to keep the parser inside the `json.hpp` header, and I am not aware of approaches similar to [`re2c`](http://re2c.org) for parsing.
 - Extending and updating existing **benchmarks** to include (the most recent version of) this library. Though efficiency is not everything, speed and memory consumption are very important characteristics for C++ developers, so having proper comparisons would be interesting.
-- Check the code with [**Coverity**](https://scan.coverity.com).
-- Make the code **locale-independent**. The library currently only works for a locale where `.` is the decimal point character.

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,46 @@
+
+## Files to change
+
+There are currently two files which need to be edited:
+
+1. [`src/json.hpp.re2c`](https://github.com/nlohmann/json/blob/master/src/json.hpp.re2c) (note the `.re2c` suffix) - This file contains a comment section which describes the JSON lexic. This section is translated by [`re2c`](http://re2c.org) into file [`src/json.hpp`](https://github.com/nlohmann/json/blob/master/src/json.hpp) which is plain "vanilla" C++11 code. (In fact, the generated lexer consists of some hundred lines of `goto`s, which is a hint you never want to edit this file...).
+
+   If you only edit file `src/json.hpp` (without the `.re2c` suffix), your changes will be overwritten as soon as the lexer is touched again. To generate the `src/json.hpp` file which is actually used during compilation of the tests and all other code, please execute
+
+   ```sh
+   make re2c
+   ```
+
+   To run [`re2c`](http://re2c.org) and generate/overwrite file `src/json.hpp` with your changes in file `src/json.hpp.re2c`.
+
+
+2. [`test/src/unit.cpp`](https://github.com/nlohmann/json/blob/master/test/unit.cpp) - This contains the [Catch](https://github.com/philsquared/Catch) unit tests which currently cover [100 %](https://coveralls.io/github/nlohmann/json) of the library's code.
+
+   If you add or change a feature, please also add a unit test to this file. The unit tests can be compiled with
+
+   ```sh
+   make
+   ```
+
+   and can be executed with
+
+   ```sh
+   ./json_unit
+   ```
+
+   The test cases are also executed with several different compilers on [Travis](https://travis-ci.org/nlohmann/json) once you open a pull request.
+
+Please understand that I cannot accept pull requests changing only file `src/json.hpp`.
+
+
+## Note
+
+- If you open a pull request, the code will be automatically tested with [Valgrind](http://valgrind.org)'s Memcheck tool to detect memory leaks. Please be aware that the execution with Valgrind _may_ in rare cases yield different behavior than running the code directly. This can result in failing unit tests which run successfully without Valgrind.
+
+## Please don't
+
+- Only make changes to file `src/json.hpp` -- please read the paragraph above and understand why `src/json.hpp.re2c` exists.
+- The C++11 support varies between different **compilers** and versions. Please note the [list of supported compilers](https://github.com/nlohmann/json/blob/master/README.md#supported-compilers). Some compilers like GCC 4.8 (and earlier), Clang 3.3 (and earlier), or Microsoft Visual Studio 13.0 and earlier are known not to work due to missing or incomplete C++11 support. Please refrain from proposing changes that work around these compiler's limitations with `#ifdef`s or other means.
+- Specifically, I am aware of compilation problems with **Microsoft Visual Studio** (there even is an [issue label](https://github.com/nlohmann/json/issues?utf8=✓&q=label%3A%22visual+studio%22+) for these kind of bugs). I understand that even in 2016, complete C++11 support isn't there yet. But please also understand that I do not want to drop features or uglify the code just to make Microsoft's sub-standard compiler happy. The past has shown that there are ways to express the functionality such that the code compiles with the most recent MSVC - unfortunately, this is not the main objective of the project.
+- Please refrain from proposing changes that would **break [JSON](http://json.org) conformance**. If you propose a conformant extension of JSON to be supported by the library, please motivate this extension.
+- Please do not open pull requests that address **multiple issues**.

.gitignore

@@ -1,7 +1,31 @@
 json_unit
 json_benchmarks
+fuzz-testing
+
+*.dSYM
+*.o
+*.gcno
+*.gcda
 
 working
 
-html
+doc/xml
+doc/html
 me.nlohmann.json.docset
+
+benchmarks/files/numbers/*.json
+
+.idea
+cmake-build-debug
+
+
+test/test-*
+.svn
+
+test/thirdparty/Fuzzer/libFuzzer.a
+
+test/parse_afl_fuzzer
+
+test/parse_cbor_fuzzer
+
+test/parse_msgpack_fuzzer

.travis.yml

@@ -1,58 +1,262 @@
+#########################
+# project configuration #
+#########################
+
+# C++ project
 language: cpp
 
-sudo: false
+dist: trusty
+sudo: required
+
+
+###################
+# global settings #
+###################
+
+env:
+  global:
+   # The next declaration is the encrypted COVERITY_SCAN_TOKEN, created
+   #   via the "travis encrypt" command using the project repo's public key
+   - secure: "m89SSgE+ASLO38rSKx7MTXK3n5NkP9bIx95jwY71YEiuFzib30PDJ/DifKnXxBjvy/AkCGztErQRk/8ZCvq+4HXozU2knEGnL/RUitvlwbhzfh2D4lmS3BvWBGS3N3NewoPBrRmdcvnT0xjOGXxtZaJ3P74TkB9GBnlz/HmKORA="
+
+
+################
+# build matrix #
+################
 
-# from http://stackoverflow.com/a/32127147/266378
 matrix:
   include:
-    - os: linux
-      compiler: gcc
-      addons:
-        apt:
-          sources: ['ubuntu-toolchain-r-test']
-          packages: ['g++-4.9', 'valgrind', 'python-pip', 'python-yaml']
-      before_script:
-        - pip install --user git+git://github.com/eddyxu/cpp-coveralls.git
-      after_success:
-        - make clean
-        - touch src/json.hpp
-        - make json_unit CXXFLAGS="-fprofile-arcs -ftest-coverage -std=c++11 -lstdc++" CXX=$COMPILER
-        - ./json_unit "*"
-        - coveralls --exclude test/catch.hpp --exclude test/unit.cpp --include src/json.hpp --gcov-options '\-lp' --gcov 'gcov-4.9'
-      env: COMPILER=g++-4.9
 
-    - os: linux
-      compiler: gcc
-      addons:
-        apt:
-          sources: ['ubuntu-toolchain-r-test']
-          packages: ['g++-5', 'valgrind']
-      env: COMPILER=g++-5
+  # Valgrind
 
-    - os: linux
-      compiler: clang
-      addons:
-        apt:
-          sources: ['ubuntu-toolchain-r-test', 'llvm-toolchain-precise-3.6']
-          packages: ['clang-3.6', 'valgrind']
-      env: COMPILER=clang++-3.6
+  - os: linux
+    compiler: gcc
+    env:
+      - COMPILER=g++-4.9
+      - SPECIAL=valgrind
+    addons:
+      apt:
+        sources: ['ubuntu-toolchain-r-test']
+        packages: [g++-4.9, valgrind]
+    after_success:
+      - make check TEST_PREFIX="valgrind --error-exitcode=1 --leak-check=full " TEST_PATTERN=""
 
-    - os: linux
-      compiler: clang
-      addons:
-        apt:
-          sources: ['ubuntu-toolchain-r-test', 'llvm-toolchain-precise-3.7']
-          packages: ['clang-3.7', 'valgrind']
-      env: COMPILER=clang++-3.7
-     
-   # - os: osx
-   #   compiler: clang
-   #   env: COMPILER=clang
-   #   before_install:
-   #     - brew update
-   #     - brew install valgrind
+  # cLang sanitizer
+  # note: sadly clang's libc++ has errors when running with sanitize,
+  # so we use clang with gcc's libstdc++ which doesn't give those error.
+  # that's why we need to install g++-6 to get the lastest version
+  - os: linux
+    env:
+      - LLVM_VERSION=3.8.1
+      - SPECIAL=sanitizer
+    addons:
+      apt:
+        sources: ['ubuntu-toolchain-r-test']
+        packages: g++-6
+    compiler: clang
+    before_script:
+      - make clang_sanitize
+
+  # cppcheck
+
+  - os: linux
+    compiler: gcc
+    env:
+      - COMPILER=g++-4.9
+      - SPECIAL=cppcheck
+    addons:
+      apt:
+        sources: ['ubuntu-toolchain-r-test']
+        packages: [g++-4.9, cppcheck]
+    after_success:
+      - make cppcheck
+
+  # Coveralls (http://gronlier.fr/blog/2015/01/adding-code-coverage-to-your-c-project/)
+
+  - os: linux
+    compiler: gcc
+    addons:
+      apt:
+        sources: ['ubuntu-toolchain-r-test']
+        packages: ['g++-4.9', 'ruby']
+    before_script:
+      - wget http://ftp.de.debian.org/debian/pool/main/l/lcov/lcov_1.11.orig.tar.gz
+      - tar xf lcov_1.11.orig.tar.gz
+      - sudo make -C lcov-1.11/ install
+      - gem install coveralls-lcov
+      - pip install --user cpp-coveralls
+    after_success:
+      - make clean
+      - CXXFLAGS="--coverage -g -O0" CPPFLAGS="-DNDEBUG" make json_unit
+      - test/json_unit "*"
+      - coveralls --build-root test --exclude src/catch.hpp --exclude src/unit-algorithms.cpp --exclude src/unit-allocator.cpp --exclude src/unit-capacity.cpp --exclude src/unit-class_const_iterator.cpp --exclude src/unit-class_iterator.cpp --exclude src/unit-class_lexer.cpp --exclude src/unit-class_parser.cpp --exclude src/unit-comparison.cpp --exclude src/unit-concepts.cpp --exclude src/unit-constructor1.cpp --exclude src/unit-constructor2.cpp --exclude src/unit-convenience.cpp --exclude src/unit-conversions.cpp --exclude src/unit-deserialization.cpp --exclude src/unit-element_access1.cpp --exclude src/unit-element_access2.cpp --exclude src/unit-inspection.cpp --exclude src/unit-iterator_wrapper.cpp --exclude src/unit-iterators1.cpp --exclude src/unit-iterators2.cpp --exclude src/unit-json_patch.cpp --exclude src/unit-json_pointer.cpp --exclude src/unit-modifiers.cpp --exclude src/unit-pointer_access.cpp --exclude src/unit-readme.cpp --exclude src/unit-reference_access.cpp --exclude src/unit-regression.cpp --exclude src/unit-serialization.cpp --exclude src/unit-testsuites.cpp --exclude src/unit-unicode.cpp --include ../src/json.hpp --gcov-options '\-lp' --gcov 'gcov-4.9'
+      - lcov --directory src --directory test/src --capture --output-file coverage.info --rc lcov_branch_coverage=1 --no-external
+      - lcov --remove coverage.info 'test/src/*' --output-file coverage.info --rc lcov_branch_coverage=1
+      - lcov --list coverage.info --rc lcov_branch_coverage=1
+      - coveralls-lcov --repo-token F9bs4Nop10JRgqPQXRcifyQKYhb3FczkS coverage.info
+    env:
+      - COMPILER=g++-4.9
+      - SPECIAL=coveralls
+
+  # Coverity (only for branch coverity_scan)
+
+  - os: linux
+    compiler: clang
+    before_install: echo -n | openssl s_client -connect scan.coverity.com:443 | sed -ne '/-BEGIN CERTIFICATE-/,/-END CERTIFICATE-/p' | sudo tee -a /etc/ssl/certs/ca-certificates.crt
+    addons:
+      coverity_scan:
+        project:
+          name: "nlohmann/json"
+          description: "Build submitted via Travis CI"
+        notification_email: niels.lohmann@gmail.com
+        build_command_prepend: "make clean"
+        build_command: "make"
+        branch_pattern: coverity_scan
+    env:
+      - LLVM_VERSION=3.6.0
+      - SPECIAL=coverity
+
+  # OSX / Clang
+
+  - os: osx
+    osx_image: xcode6.4
+
+  - os: osx
+    osx_image: xcode7.3
+
+  - os: osx
+    osx_image: xcode8
+
+  - os: osx
+    osx_image: xcode8.1
+
+  - os: osx
+    osx_image: xcode8.2
+
+  # Linux / GCC
+
+  - os: linux
+    compiler: gcc
+    env: COMPILER=g++-4.9
+    addons:
+      apt:
+        sources: ['ubuntu-toolchain-r-test']
+        packages: g++-4.9
+
+  - os: linux
+    compiler: gcc
+    env: COMPILER=g++-5
+    addons:
+      apt:
+        sources: ['ubuntu-toolchain-r-test']
+        packages: g++-5
+
+  - os: linux
+    compiler: gcc
+    env: COMPILER=g++-6
+    addons:
+      apt:
+        sources: ['ubuntu-toolchain-r-test']
+        packages: g++-6
+
+  # Linux / Clang
+
+  - os: linux
+    env: LLVM_VERSION=3.6.0
+    compiler: clang
+
+  - os: linux
+    env: LLVM_VERSION=3.6.1
+    compiler: clang
+
+  - os: linux
+    env: LLVM_VERSION=3.6.2
+    compiler: clang
+
+  - os: linux
+    env: LLVM_VERSION=3.7.0
+    compiler: clang
+
+  - os: linux
+    env: LLVM_VERSION=3.7.1
+    compiler: clang
+
+  - os: linux
+    env: LLVM_VERSION=3.8.0
+    compiler: clang
+
+  - os: linux
+    env: LLVM_VERSION=3.8.1
+    compiler: clang
+
+#####################
+# installation step #
+#####################
+
+# set directories to cache
+cache:
+  directories:
+    - ${TRAVIS_BUILD_DIR}/deps/llvm-3.6.2
+    - ${TRAVIS_BUILD_DIR}/deps/llvm-3.6.1
+    - ${TRAVIS_BUILD_DIR}/deps/llvm-3.6.0
+    - ${TRAVIS_BUILD_DIR}/deps/llvm-3.7.0
+    - ${TRAVIS_BUILD_DIR}/deps/llvm-3.7.1
+    - ${TRAVIS_BUILD_DIR}/deps/llvm-3.8.0
+    - ${TRAVIS_BUILD_DIR}/deps/llvm-3.8.1
+
+
+install:
+  # create deps dir if not existing
+  - DEPS_DIR="${TRAVIS_BUILD_DIR}/deps"
+  - mkdir -p ${DEPS_DIR}
+
+  # make sure CXX is correctly set
+  - if [[ "${COMPILER}" != "" ]]; then export CXX=${COMPILER}; fi
+
+  # install LLVM/clang when LLVM_VERSION is set
+  - |
+     if [[ "${LLVM_VERSION}" != "" ]]; then
+       LLVM_DIR=${DEPS_DIR}/llvm-${LLVM_VERSION}
+       if [[ -z "$(ls -A ${LLVM_DIR})" ]]; then
+         travis_retry wget --quiet https://cmake.org/files/v3.6/cmake-3.6.1.tar.gz
+         tar xfz cmake-3.6.1.tar.gz
+         (cd cmake-3.6.1 && ./configure --prefix=${LLVM_DIR}/cmake && make install)
+         export PATH="${LLVM_DIR}/cmake/bin:${PATH}"
+         LLVM_URL="http://llvm.org/releases/${LLVM_VERSION}/llvm-${LLVM_VERSION}.src.tar.xz"
+         LIBCXX_URL="http://llvm.org/releases/${LLVM_VERSION}/libcxx-${LLVM_VERSION}.src.tar.xz"
+         LIBCXXABI_URL="http://llvm.org/releases/${LLVM_VERSION}/libcxxabi-${LLVM_VERSION}.src.tar.xz"
+         CLANG_URL="http://llvm.org/releases/${LLVM_VERSION}/clang+llvm-${LLVM_VERSION}-x86_64-linux-gnu-ubuntu-14.04.tar.xz"
+         mkdir -p ${LLVM_DIR} ${LLVM_DIR}/build ${LLVM_DIR}/projects/libcxx ${LLVM_DIR}/projects/libcxxabi ${LLVM_DIR}/clang
+         travis_retry wget --quiet -O - ${LLVM_URL}      | tar --strip-components=1 -xJ -C ${LLVM_DIR}
+         travis_retry wget --quiet -O - ${LIBCXX_URL}    | tar --strip-components=1 -xJ -C ${LLVM_DIR}/projects/libcxx
+         travis_retry wget --quiet -O - ${LIBCXXABI_URL} | tar --strip-components=1 -xJ -C ${LLVM_DIR}/projects/libcxxabi
+         travis_retry wget --quiet -O - ${CLANG_URL}     | tar --strip-components=1 -xJ -C ${LLVM_DIR}/clang
+         (cd ${LLVM_DIR}/build && cmake .. -DCMAKE_INSTALL_PREFIX=${LLVM_DIR}/install -DCMAKE_CXX_COMPILER=clang++)
+         (cd ${LLVM_DIR}/build/projects/libcxx && make install -j2)
+         (cd ${LLVM_DIR}/build/projects/libcxxabi && make install -j2)
+       fi
+       export CXXFLAGS="-nostdinc++ -isystem ${LLVM_DIR}/install/include/c++/v1"
+       export LDFLAGS="-L ${LLVM_DIR}/install/lib -l c++ -l c++abi"
+       export LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${LLVM_DIR}/install/lib"
+       export PATH="${LLVM_DIR}/clang/bin:${PATH}"
+     fi
+
+################
+# build script #
+################
 
 script:
-  - make CXX=$COMPILER CXXFLAGS="-lstdc++"
-  - ./json_unit "*"
-  - valgrind --error-exitcode=1 --leak-check=full ./json_unit
+  # show OS/compiler version
+  - uname -a
+  - $CXX --version
+
+  # compile and execute unit tests
+  - make check
+
+  # check if homebrew works (only checks develop branch)
+  - if [ `which brew` ]; then
+    brew update ;
+    brew tap nlohmann/json ;
+    brew install nlohmann_json --HEAD ;
+    brew test nlohmann_json ;
+    fi

CMakeLists.txt

@@ -1,25 +1,55 @@
-cmake_minimum_required(VERSION 2.8)
+cmake_minimum_required(VERSION 3.0)
 
-project(json CXX)
+# define the project
+project(nlohmann_json VERSION 2.0.10 LANGUAGES CXX)
 
-add_executable(json_unit
-    src/json.hpp test/catch.hpp test/unit.cpp
-)
+enable_testing()
 
-if(MSVC)
-    set(CMAKE_CXX_FLAGS
-        "/EHsc"
-    )
+option(BuildTests "Build the unit tests" ON)
 
-    STRING(REPLACE "/O2" "/Od" CMAKE_CXX_FLAGS_RELEASE ${CMAKE_CXX_FLAGS_RELEASE})
+# define project variables
+set(JSON_TARGET_NAME ${PROJECT_NAME})
+set(JSON_PACKAGE_NAME ${JSON_TARGET_NAME})
+set(JSON_TARGETS_FILENAME "${JSON_PACKAGE_NAME}Targets.cmake")
+set(JSON_CONFIG_FILENAME "${JSON_PACKAGE_NAME}Config.cmake")
+set(JSON_CONFIGVERSION_FILENAME "${JSON_PACKAGE_NAME}ConfigVersion.cmake")
+set(JSON_CONFIG_DESTINATION "cmake")
+set(JSON_INCLUDE_DESTINATION "include/nlohmann")
 
-    add_definitions(-D_SCL_SECURE_NO_WARNINGS)
-else(MSVC)
-    set(CMAKE_CXX_FLAGS
-        "-std=c++11"
-    )
-endif(MSVC)
+# create and configure the library target
+add_library(${JSON_TARGET_NAME} INTERFACE)
+target_include_directories(${JSON_TARGET_NAME} INTERFACE
+  $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/src>
+  $<INSTALL_INTERFACE:${JSON_INCLUDE_DESTINATION}>)
 
-include_directories(
-    src test
-)
+# create and configure the unit test target
+if (BuildTests)
+    add_subdirectory(test)
+endif()
+
+# generate a config and config version file for the package
+include(CMakePackageConfigHelpers)
+configure_package_config_file("cmake/config.cmake.in"
+    "${CMAKE_CURRENT_BINARY_DIR}/${JSON_CONFIG_FILENAME}"
+    INSTALL_DESTINATION ${JSON_CONFIG_DESTINATION}
+    PATH_VARS JSON_INCLUDE_DESTINATION)
+write_basic_package_version_file("${CMAKE_CURRENT_BINARY_DIR}/${JSON_CONFIGVERSION_FILENAME}"
+    VERSION ${PROJECT_VERSION}
+    COMPATIBILITY SameMajorVersion)
+
+# export the library target and store build directory in package registry
+export(TARGETS ${JSON_TARGET_NAME}
+	FILE "${CMAKE_CURRENT_BINARY_DIR}/${JSON_TARGETS_FILENAME}")
+export(PACKAGE ${JSON_PACKAGE_NAME})
+
+# install library target and config files
+install(TARGETS ${JSON_TARGET_NAME}
+	EXPORT ${JSON_PACKAGE_NAME})
+install(FILES "src/json.hpp"
+	DESTINATION ${JSON_INCLUDE_DESTINATION})
+install(EXPORT ${JSON_PACKAGE_NAME}
+	FILE ${JSON_TARGETS_FILENAME}
+	DESTINATION ${JSON_CONFIG_DESTINATION})
+install(FILES "${CMAKE_CURRENT_BINARY_DIR}/${JSON_CONFIG_FILENAME}"
+	"${CMAKE_CURRENT_BINARY_DIR}/${JSON_CONFIGVERSION_FILENAME}"
+	DESTINATION ${JSON_CONFIG_DESTINATION})

ChangeLog.md

@@ -0,0 +1,415 @@
+# Change Log
+All notable changes to this project will be documented in this file. This project adheres to [Semantic Versioning](http://semver.org/).
+
+## [v2.0.10](https://github.com/nlohmann/json/releases/tag/v2.0.10) (2017-01-02)
+[Full Changelog](https://github.com/nlohmann/json/compare/v2.0.9...v2.0.10)
+
+- Heap-buffer-overflow \(OSS-Fuzz issue 367\) [\#412](https://github.com/nlohmann/json/issues/412)
+- Heap-buffer-overflow \(OSS-Fuzz issue 366\) [\#411](https://github.com/nlohmann/json/issues/411)
+- Use-of-uninitialized-value \(OSS-Fuzz issue 347\) [\#409](https://github.com/nlohmann/json/issues/409)
+- Heap-buffer-overflow \(OSS-Fuzz issue 344\) [\#408](https://github.com/nlohmann/json/issues/408)
+- Heap-buffer-overflow \(OSS-Fuzz issue 343\) [\#407](https://github.com/nlohmann/json/issues/407)
+- Heap-buffer-overflow \(OSS-Fuzz issue 342\) [\#405](https://github.com/nlohmann/json/issues/405)
+- strerror throwing error in compiler VS2015 [\#403](https://github.com/nlohmann/json/issues/403)
+- json::parse of std::string being underlined by Visual Studio [\#402](https://github.com/nlohmann/json/issues/402)
+- Explicitly getting string without .dump\(\)  [\#401](https://github.com/nlohmann/json/issues/401)
+- Possible to speed up json::parse? [\#398](https://github.com/nlohmann/json/issues/398)
+- the alphabetic order in the code influence console\_output. [\#396](https://github.com/nlohmann/json/issues/396)
+- Execute tests with clang sanitizers [\#394](https://github.com/nlohmann/json/issues/394)
+- Check if library can be used with ETL [\#361](https://github.com/nlohmann/json/issues/361)
+
+- Feature/clang sanitize [\#410](https://github.com/nlohmann/json/pull/410) ([Daniel599](https://github.com/Daniel599))
+- Add Doozer build badge [\#400](https://github.com/nlohmann/json/pull/400) ([andoma](https://github.com/andoma))
+
+## [v2.0.9](https://github.com/nlohmann/json/releases/tag/v2.0.9) (2016-12-16)
+[Full Changelog](https://github.com/nlohmann/json/compare/v2.0.8...v2.0.9)
+
+- \#pragma GCC diagnostic ignored "-Wdocumentation" [\#393](https://github.com/nlohmann/json/issues/393)
+- How to parse this json file and write separate sub object as json files? [\#392](https://github.com/nlohmann/json/issues/392)
+- Integer-overflow \(OSS-Fuzz issue 267\) [\#389](https://github.com/nlohmann/json/issues/389)
+- Implement indefinite-length types from RFC 7049 [\#387](https://github.com/nlohmann/json/issues/387)
+- template parameter "T" is not used in declaring the parameter types of function template [\#386](https://github.com/nlohmann/json/issues/386)
+- Serializing json instances containing already serialized string values without escaping [\#385](https://github.com/nlohmann/json/issues/385)
+- Add test cases from RFC 7049 [\#384](https://github.com/nlohmann/json/issues/384)
+- Add a table of contents to the README file [\#383](https://github.com/nlohmann/json/issues/383)
+- Update FAQ section in the guidelines for contributing [\#382](https://github.com/nlohmann/json/issues/382)
+- Allow for forward declaring nlohmann::json [\#381](https://github.com/nlohmann/json/issues/381)
+- Bug in overflow detection when parsing integers [\#380](https://github.com/nlohmann/json/issues/380)
+- A unique name to mention the library? [\#377](https://github.com/nlohmann/json/issues/377)
+- Support for comments. [\#376](https://github.com/nlohmann/json/issues/376)
+- Non-unique keys in objects. [\#375](https://github.com/nlohmann/json/issues/375)
+- Request: binary serialization/deserialization [\#358](https://github.com/nlohmann/json/issues/358)
+
+- Replace class iterator and const\_iterator by using a single template class to reduce code. [\#395](https://github.com/nlohmann/json/pull/395) ([Bosswestfalen](https://github.com/Bosswestfalen))
+- Clang: quiet a warning [\#391](https://github.com/nlohmann/json/pull/391) ([jaredgrubb](https://github.com/jaredgrubb))
+- Fix issue \#380: Signed integer overflow check [\#390](https://github.com/nlohmann/json/pull/390) ([qwename](https://github.com/qwename))
+
+## [v2.0.8](https://github.com/nlohmann/json/releases/tag/v2.0.8) (2016-12-02)
+[Full Changelog](https://github.com/nlohmann/json/compare/v2.0.7...v2.0.8)
+
+- Reading from file [\#374](https://github.com/nlohmann/json/issues/374)
+- Compiler warnings? [\#372](https://github.com/nlohmann/json/issues/372)
+- docs: how to release a json object in memory? [\#371](https://github.com/nlohmann/json/issues/371)
+- crash in dump [\#370](https://github.com/nlohmann/json/issues/370)
+- Coverity issue \(FORWARD\_NULL\) in lexer\(std::istream& s\) [\#368](https://github.com/nlohmann/json/issues/368)
+- json::parse on failed stream gets stuck [\#366](https://github.com/nlohmann/json/issues/366)
+- Performance improvements [\#365](https://github.com/nlohmann/json/issues/365)
+- 'to\_string' is not a member of 'std'  [\#364](https://github.com/nlohmann/json/issues/364)
+- Optional comment support. [\#363](https://github.com/nlohmann/json/issues/363)
+- Loss of precision when serializing \<double\> [\#360](https://github.com/nlohmann/json/issues/360)
+- Crash in dump\(\) from a static object [\#359](https://github.com/nlohmann/json/issues/359)
+- json::parse\(...\) vs json j; j.parse\(...\) [\#357](https://github.com/nlohmann/json/issues/357)
+- Hi, is there any method to dump  json to string with the insert order rather than alphabets [\#356](https://github.com/nlohmann/json/issues/356)
+- Provide an example of reading from an json with only a key that has an array of strings. [\#354](https://github.com/nlohmann/json/issues/354)
+- Request: access with default value. [\#353](https://github.com/nlohmann/json/issues/353)
+- {} and \[\] causes parser error. [\#352](https://github.com/nlohmann/json/issues/352)
+- Reading a JSON file into a JSON object [\#351](https://github.com/nlohmann/json/issues/351)
+- Request: 'emplace\_back' [\#349](https://github.com/nlohmann/json/issues/349)
+- Is it possible to stream data through the json parser without storing everything in memory? [\#347](https://github.com/nlohmann/json/issues/347)
+- pure virtual conversion operator [\#346](https://github.com/nlohmann/json/issues/346)
+- Floating point precision lost [\#345](https://github.com/nlohmann/json/issues/345)
+- unit-conversions SIGSEGV on armv7hl [\#303](https://github.com/nlohmann/json/issues/303)
+- Coverity scan fails [\#299](https://github.com/nlohmann/json/issues/299)
+- Using QString as string type [\#274](https://github.com/nlohmann/json/issues/274)
+
+## [v2.0.7](https://github.com/nlohmann/json/releases/tag/v2.0.7) (2016-11-02)
+[Full Changelog](https://github.com/nlohmann/json/compare/v2.0.6...v2.0.7)
+
+- JSON5 [\#348](https://github.com/nlohmann/json/issues/348)
+- Check "Parsing JSON is a Minefield" [\#344](https://github.com/nlohmann/json/issues/344)
+- Allow hex numbers [\#342](https://github.com/nlohmann/json/issues/342)
+- Convert strings to numbers [\#341](https://github.com/nlohmann/json/issues/341)
+- ""-operators ignore the length parameter [\#340](https://github.com/nlohmann/json/issues/340)
+- JSON into std::tuple [\#339](https://github.com/nlohmann/json/issues/339)
+- JSON into vector [\#335](https://github.com/nlohmann/json/issues/335)
+- Installing with Homebrew on Mac Errors \(El Capitan\) [\#331](https://github.com/nlohmann/json/issues/331)
+- g++ make check results in error [\#312](https://github.com/nlohmann/json/issues/312)
+- Cannot convert from 'json' to 'char' [\#276](https://github.com/nlohmann/json/issues/276)
+- Please add a Pretty-Print option for arrays to stay always in one line [\#229](https://github.com/nlohmann/json/issues/229)
+- Conversion to STL map\<string, vector\<int\>\> gives error [\#220](https://github.com/nlohmann/json/issues/220)
+- std::unorderd\_map cannot be used as ObjectType [\#164](https://github.com/nlohmann/json/issues/164)
+
+- fix minor grammar/style issue in README.md [\#336](https://github.com/nlohmann/json/pull/336) ([seeekr](https://github.com/seeekr))
+
+## [v2.0.6](https://github.com/nlohmann/json/releases/tag/v2.0.6) (2016-10-15)
+[Full Changelog](https://github.com/nlohmann/json/compare/v2.0.5...v2.0.6)
+
+- How to handle json files? [\#333](https://github.com/nlohmann/json/issues/333)
+- This file requires compiler and library support .... [\#332](https://github.com/nlohmann/json/issues/332)
+- Segmentation fault on saving json to file [\#326](https://github.com/nlohmann/json/issues/326)
+- parse error - unexpected \<uninitialized\> with 2.0.5 [\#325](https://github.com/nlohmann/json/issues/325)
+- Add nested object capability to pointers [\#323](https://github.com/nlohmann/json/issues/323)
+- Fix usage examples' comments for std::multiset [\#322](https://github.com/nlohmann/json/issues/322)
+- json\_unit runs forever when executed in build directory [\#319](https://github.com/nlohmann/json/issues/319)
+- Visual studio 2015 update3 true != TRUE [\#317](https://github.com/nlohmann/json/issues/317)
+- releasing single header file in compressed format [\#316](https://github.com/nlohmann/json/issues/316)
+- json object from std::ifstream [\#315](https://github.com/nlohmann/json/issues/315)
+
+- make has\_mapped\_type struct friendly [\#324](https://github.com/nlohmann/json/pull/324) ([vpetrigo](https://github.com/vpetrigo))
+- Fix usage examples' comments for std::multiset [\#321](https://github.com/nlohmann/json/pull/321) ([vasild](https://github.com/vasild))
+- Include dir relocation [\#318](https://github.com/nlohmann/json/pull/318) ([ChristophJud](https://github.com/ChristophJud))
+- trivial documentation fix [\#313](https://github.com/nlohmann/json/pull/313) ([5tefan](https://github.com/5tefan))
+
+## [v2.0.5](https://github.com/nlohmann/json/releases/tag/v2.0.5) (2016-09-14)
+[Full Changelog](https://github.com/nlohmann/json/compare/v2.0.4...v2.0.5)
+
+- \[feature request\]: schema validator and comments [\#311](https://github.com/nlohmann/json/issues/311)
+- make json\_benchmarks no longer working in 2.0.4 [\#310](https://github.com/nlohmann/json/issues/310)
+- Segmentation fault \(core dumped\) [\#309](https://github.com/nlohmann/json/issues/309)
+- No matching member function for call to 'get\_impl' [\#308](https://github.com/nlohmann/json/issues/308)
+
+## [v2.0.4](https://github.com/nlohmann/json/releases/tag/v2.0.4) (2016-09-11)
+[Full Changelog](https://github.com/nlohmann/json/compare/v2.0.3...v2.0.4)
+
+- Parsing fails without space at end of file [\#306](https://github.com/nlohmann/json/issues/306)
+- json schema validator [\#305](https://github.com/nlohmann/json/issues/305)
+- Unused variable warning [\#304](https://github.com/nlohmann/json/issues/304)
+
+## [v2.0.3](https://github.com/nlohmann/json/releases/tag/v2.0.3) (2016-08-31)
+[Full Changelog](https://github.com/nlohmann/json/compare/v2.0.2...v2.0.3)
+
+- warning C4706: assignment within conditional expression [\#295](https://github.com/nlohmann/json/issues/295)
+- Strip comments / Minify [\#294](https://github.com/nlohmann/json/issues/294)
+- Q: Is it possible to build json tree from already UTF8 encoded values? [\#293](https://github.com/nlohmann/json/issues/293)
+- Equality operator results in array when assigned object [\#292](https://github.com/nlohmann/json/issues/292)
+- Support for integers not from the range \[-\(2\*\*53\)+1, \(2\*\*53\)-1\] in parser [\#291](https://github.com/nlohmann/json/issues/291)
+- Support for iterator-range parsing [\#290](https://github.com/nlohmann/json/issues/290)
+- Horribly inconsistent behavior between const/non-const reference in operator \[\] \(\) [\#289](https://github.com/nlohmann/json/issues/289)
+- Silently get numbers into smaller types [\#288](https://github.com/nlohmann/json/issues/288)
+- Incorrect parsing of large int64\_t numbers [\#287](https://github.com/nlohmann/json/issues/287)
+- \[question\]: macro to disable floating point support [\#284](https://github.com/nlohmann/json/issues/284)
+
+- unit-constructor1.cpp: Fix floating point truncation warning [\#300](https://github.com/nlohmann/json/pull/300) ([t-b](https://github.com/t-b))
+
+## [v2.0.2](https://github.com/nlohmann/json/releases/tag/v2.0.2) (2016-07-31)
+[Full Changelog](https://github.com/nlohmann/json/compare/v2.0.1...v2.0.2)
+
+- can function dump\(\)  return string in the order I push in the json object ? [\#286](https://github.com/nlohmann/json/issues/286)
+- Error on the Mac: Undefined symbols for architecture x86\_64 [\#285](https://github.com/nlohmann/json/issues/285)
+- value\(\) does not work with \_json\_pointer types [\#283](https://github.com/nlohmann/json/issues/283)
+- Build error for std::int64 [\#282](https://github.com/nlohmann/json/issues/282)
+- strings can't be accessed after dump\(\)-\>parse\(\) - type is lost [\#281](https://github.com/nlohmann/json/issues/281)
+- Easy serialization of classes [\#280](https://github.com/nlohmann/json/issues/280)
+- recursive data structures [\#277](https://github.com/nlohmann/json/issues/277)
+- hexify\(\) function emits conversion warning [\#270](https://github.com/nlohmann/json/issues/270)
+
+- let the makefile choose the correct sed [\#279](https://github.com/nlohmann/json/pull/279) ([murinicanor](https://github.com/murinicanor))
+- Update hexify to use array lookup instead of ternary \(\#270\) [\#275](https://github.com/nlohmann/json/pull/275) ([dtoma](https://github.com/dtoma))
+
+## [v2.0.1](https://github.com/nlohmann/json/releases/tag/v2.0.1) (2016-06-28)
+[Full Changelog](https://github.com/nlohmann/json/compare/v2.0.0...v2.0.1)
+
+- Compilation error. [\#273](https://github.com/nlohmann/json/issues/273)
+- dump\(\) performance degradation in v2 [\#272](https://github.com/nlohmann/json/issues/272)
+
+- fixed a tiny typo [\#271](https://github.com/nlohmann/json/pull/271) ([thelostt](https://github.com/thelostt))
+
+## [v2.0.0](https://github.com/nlohmann/json/releases/tag/v2.0.0) (2016-06-23)
+[Full Changelog](https://github.com/nlohmann/json/compare/v1.1.0...v2.0.0)
+
+- json::diff generates incorrect patch when removing multiple array elements. [\#269](https://github.com/nlohmann/json/issues/269)
+- Docs - What does Json\[key\] return? [\#267](https://github.com/nlohmann/json/issues/267)
+- Compiler Errors With JSON.hpp [\#265](https://github.com/nlohmann/json/issues/265)
+- Throw exception instead of crashing my app [\#264](https://github.com/nlohmann/json/issues/264)
+- Ambiguous push\_back and operator+= overloads [\#263](https://github.com/nlohmann/json/issues/263)
+- Preseving order of items in json [\#262](https://github.com/nlohmann/json/issues/262)
+- '\' char problem in strings [\#261](https://github.com/nlohmann/json/issues/261)
+- VS2015 compile fail [\#260](https://github.com/nlohmann/json/issues/260)
+- -Wconversion warning [\#259](https://github.com/nlohmann/json/issues/259)
+- Maybe a bug [\#258](https://github.com/nlohmann/json/issues/258)
+- Few tests failed on Visual C++ 2015 [\#257](https://github.com/nlohmann/json/issues/257)
+- Access keys when iteration with new for loop C++11 [\#256](https://github.com/nlohmann/json/issues/256)
+- multiline text values [\#255](https://github.com/nlohmann/json/issues/255)
+- Error when using json in g++ [\#254](https://github.com/nlohmann/json/issues/254)
+- is the release 2.0? [\#253](https://github.com/nlohmann/json/issues/253)
+- concatenate objects [\#252](https://github.com/nlohmann/json/issues/252)
+- Encoding [\#251](https://github.com/nlohmann/json/issues/251)
+- Unable to build example for constructing json object with stringstreams [\#250](https://github.com/nlohmann/json/issues/250)
+- Hexadecimal support [\#249](https://github.com/nlohmann/json/issues/249)
+- Update long-term goals [\#246](https://github.com/nlohmann/json/issues/246)
+- Contribution To This Json Project [\#245](https://github.com/nlohmann/json/issues/245)
+- Trouble using parser with initial dictionary [\#243](https://github.com/nlohmann/json/issues/243)
+- Unit test fails when doing a CMake out-of-tree build [\#241](https://github.com/nlohmann/json/issues/241)
+- -Wconversion warnings [\#239](https://github.com/nlohmann/json/issues/239)
+- Additional integration options [\#237](https://github.com/nlohmann/json/issues/237)
+- .get\<std::string\>\(\) works for non spaced string but returns as array for spaced/longer strings [\#236](https://github.com/nlohmann/json/issues/236)
+- ambiguous overload for 'push\_back' and 'operator+=' [\#235](https://github.com/nlohmann/json/issues/235)
+- Can't use basic\_json::iterator as a base iterator for std::move\_iterator [\#233](https://github.com/nlohmann/json/issues/233)
+- json object's creation can freezes execution [\#231](https://github.com/nlohmann/json/issues/231)
+- Incorrect dumping of parsed numbers with exponents, but without decimal places [\#230](https://github.com/nlohmann/json/issues/230)
+- double values are serialized with commas as decimal points [\#228](https://github.com/nlohmann/json/issues/228)
+- Move semantics with std::initializer\_list [\#225](https://github.com/nlohmann/json/issues/225)
+- replace emplace [\#224](https://github.com/nlohmann/json/issues/224)
+- abort during getline in yyfill [\#223](https://github.com/nlohmann/json/issues/223)
+- free\(\): invalid pointer error in GCC 5.2.1 [\#221](https://github.com/nlohmann/json/issues/221)
+- Error compile Android NDK  error: 'strtof' is not a member of 'std' [\#219](https://github.com/nlohmann/json/issues/219)
+- Wrong link in the README.md [\#217](https://github.com/nlohmann/json/issues/217)
+- Wide character strings not supported [\#216](https://github.com/nlohmann/json/issues/216)
+- Memory allocations using range-based for loops [\#214](https://github.com/nlohmann/json/issues/214)
+- would you like to support gcc 4.8.1?  [\#211](https://github.com/nlohmann/json/issues/211)
+- Reading concatenated json's from an istream [\#210](https://github.com/nlohmann/json/issues/210)
+- Conflicting typedef of ssize\_t on Windows 32 bit when using Boost.Python [\#204](https://github.com/nlohmann/json/issues/204)
+- Inconsistency between operator\[\] and push\_back [\#203](https://github.com/nlohmann/json/issues/203)
+- Small bugs in json.hpp \(get\_number\) and unit.cpp \(non-standard integer type test\) [\#199](https://github.com/nlohmann/json/issues/199)
+- GCC/clang floating point parsing bug in strtod\(\) [\#195](https://github.com/nlohmann/json/issues/195)
+- What is within scope? [\#192](https://github.com/nlohmann/json/issues/192)
+- Bugs in miloyip/nativejson-benchmark: roundtrips [\#187](https://github.com/nlohmann/json/issues/187)
+- Floating point exceptions [\#181](https://github.com/nlohmann/json/issues/181)
+- Integer conversion to unsigned [\#178](https://github.com/nlohmann/json/issues/178)
+- map string string fails to compile [\#176](https://github.com/nlohmann/json/issues/176)
+- In basic\_json::basic\_json\(const CompatibleArrayType& val\), the requirement of CompatibleArrayType is not strict enough. [\#174](https://github.com/nlohmann/json/issues/174)
+- Provide a FAQ [\#163](https://github.com/nlohmann/json/issues/163)
+- Implicit assignment to std::string fails [\#144](https://github.com/nlohmann/json/issues/144)
+
+- Fix Issue \#265 [\#266](https://github.com/nlohmann/json/pull/266) ([06needhamt](https://github.com/06needhamt))
+- Define CMake/CTest tests [\#247](https://github.com/nlohmann/json/pull/247) ([robertmrk](https://github.com/robertmrk))
+- Out of tree builds and a few other miscellaneous CMake cleanups. [\#242](https://github.com/nlohmann/json/pull/242) ([ChrisKitching](https://github.com/ChrisKitching))
+- Implement additional integration options [\#238](https://github.com/nlohmann/json/pull/238) ([robertmrk](https://github.com/robertmrk))
+- make serialization locale-independent [\#232](https://github.com/nlohmann/json/pull/232) ([nlohmann](https://github.com/nlohmann))
+- fixes \#223 by updating README.md [\#227](https://github.com/nlohmann/json/pull/227) ([kevin--](https://github.com/kevin--))
+- Use namespace std for int64\_t and uint64\_t [\#226](https://github.com/nlohmann/json/pull/226) ([lv-zheng](https://github.com/lv-zheng))
+- Added missing cerrno header to fix ERANGE compile error on android [\#222](https://github.com/nlohmann/json/pull/222) ([Teemperor](https://github.com/Teemperor))
+- Corrected readme [\#218](https://github.com/nlohmann/json/pull/218) ([Annihil](https://github.com/Annihil))
+- Create PULL\_REQUEST\_TEMPLATE.md [\#213](https://github.com/nlohmann/json/pull/213) ([whackashoe](https://github.com/whackashoe))
+- fixed noexcept; added constexpr [\#208](https://github.com/nlohmann/json/pull/208) ([nlohmann](https://github.com/nlohmann))
+- Add support for afl-fuzz testing [\#207](https://github.com/nlohmann/json/pull/207) ([mykter](https://github.com/mykter))
+- replaced ssize\_t occurrences with auto \(addresses \#204\) [\#205](https://github.com/nlohmann/json/pull/205) ([nlohmann](https://github.com/nlohmann))
+- Fixed issue \#199 - Small bugs in json.hpp \(get\_number\) and unit.cpp \(non-standard integer type test\) [\#200](https://github.com/nlohmann/json/pull/200) ([twelsby](https://github.com/twelsby))
+- Fix broken link [\#197](https://github.com/nlohmann/json/pull/197) ([vog](https://github.com/vog))
+- Issue \#195 - update Travis to Trusty due to gcc/clang strtod\(\) bug [\#196](https://github.com/nlohmann/json/pull/196) ([twelsby](https://github.com/twelsby))
+- Issue \#178 - Extending support to full uint64\_t/int64\_t range and unsigned type \(updated\) [\#193](https://github.com/nlohmann/json/pull/193) ([twelsby](https://github.com/twelsby))
+
+## [v1.1.0](https://github.com/nlohmann/json/releases/tag/v1.1.0) (2016-01-24)
+[Full Changelog](https://github.com/nlohmann/json/compare/v1.0.0...v1.1.0)
+
+- Small error in pull \#185 [\#194](https://github.com/nlohmann/json/issues/194)
+- Bugs in miloyip/nativejson-benchmark: floating-point parsing [\#186](https://github.com/nlohmann/json/issues/186)
+- Floating point equality [\#185](https://github.com/nlohmann/json/issues/185)
+- Unused variables in catch [\#180](https://github.com/nlohmann/json/issues/180)
+- Typo in documentation [\#179](https://github.com/nlohmann/json/issues/179)
+- JSON performance benchmark comparision [\#177](https://github.com/nlohmann/json/issues/177)
+- Since re2c is often ignored in pull requests, it may make sense to make a contributing.md file [\#175](https://github.com/nlohmann/json/issues/175)
+- Question about exceptions [\#173](https://github.com/nlohmann/json/issues/173)
+- Android? [\#172](https://github.com/nlohmann/json/issues/172)
+- Cannot index by key of type static constexpr const char\* [\#171](https://github.com/nlohmann/json/issues/171)
+- Add assertions [\#168](https://github.com/nlohmann/json/issues/168)
+- MSVC 2015 build fails when attempting to compare object\_t [\#167](https://github.com/nlohmann/json/issues/167)
+- Member detector is not portable [\#166](https://github.com/nlohmann/json/issues/166)
+- Unnecessary const\_cast [\#162](https://github.com/nlohmann/json/issues/162)
+- Question about get\_ref\(\) [\#128](https://github.com/nlohmann/json/issues/128)
+- range based for loop for objects [\#83](https://github.com/nlohmann/json/issues/83)
+- Consider submitting this to the Boost Library Incubator [\#66](https://github.com/nlohmann/json/issues/66)
+
+- Fixed Issue \#186 - add strto\(f|d|ld\) overload wrappers, "-0.0" special case and FP trailing zero [\#191](https://github.com/nlohmann/json/pull/191) ([twelsby](https://github.com/twelsby))
+- Issue \#185 - remove approx\(\) and use \#pragma to kill warnings [\#190](https://github.com/nlohmann/json/pull/190) ([twelsby](https://github.com/twelsby))
+- Fixed Issue \#171 - added two extra template overloads of operator\[\] for T\* arguments [\#189](https://github.com/nlohmann/json/pull/189) ([twelsby](https://github.com/twelsby))
+- Fixed issue \#167 - removed operator ValueType\(\) condition for VS2015 [\#188](https://github.com/nlohmann/json/pull/188) ([twelsby](https://github.com/twelsby))
+- Implementation of get\_ref\(\) [\#184](https://github.com/nlohmann/json/pull/184) ([dariomt](https://github.com/dariomt))
+- Fixed some typos in CONTRIBUTING.md [\#182](https://github.com/nlohmann/json/pull/182) ([nibroc](https://github.com/nibroc))
+
+## [v1.0.0](https://github.com/nlohmann/json/releases/tag/v1.0.0) (2015-12-27)
+[Full Changelog](https://github.com/nlohmann/json/compare/v1.0.0-rc1...v1.0.0)
+
+- add key name to exception [\#160](https://github.com/nlohmann/json/issues/160)
+- Getting member discarding qualifyer [\#159](https://github.com/nlohmann/json/issues/159)
+- basic\_json::iterator::value\(\) output includes quotes while basic\_json::iterator::key\(\) doesn't [\#158](https://github.com/nlohmann/json/issues/158)
+- Indexing `const basic\_json\<\>` with `const basic\_string\<char\>` [\#157](https://github.com/nlohmann/json/issues/157)
+- token\_type\_name\(token\_type t\): not all control paths return a value [\#156](https://github.com/nlohmann/json/issues/156)
+- prevent json.hpp from emitting compiler warnings [\#154](https://github.com/nlohmann/json/issues/154)
+- json::parse\(string\) does not check utf8 bom [\#152](https://github.com/nlohmann/json/issues/152)
+- unsigned 64bit values output as signed [\#151](https://github.com/nlohmann/json/issues/151)
+- Wish feature: json5 [\#150](https://github.com/nlohmann/json/issues/150)
+- Unable to compile on MSVC 2015 with SDL checking enabled: This function or variable may be unsafe. [\#149](https://github.com/nlohmann/json/issues/149)
+- "Json Object" type does not keep object order [\#148](https://github.com/nlohmann/json/issues/148)
+- dump\(\)  convert strings encoded by utf-8 to shift-jis on windows 10.  [\#147](https://github.com/nlohmann/json/issues/147)
+- Unable to get field names in a json object [\#145](https://github.com/nlohmann/json/issues/145)
+- Question: Is the use of incomplete type correct? [\#138](https://github.com/nlohmann/json/issues/138)
+- json.hpp:5746:32: error: 'to\_string' is not a member of 'std' [\#136](https://github.com/nlohmann/json/issues/136)
+- Bug in basic\_json::operator\[\] const overload [\#135](https://github.com/nlohmann/json/issues/135)
+- wrong enable\_if for const pointer \(instead of pointer-to-const\) [\#134](https://github.com/nlohmann/json/issues/134)
+- overload of at\(\) with default value [\#133](https://github.com/nlohmann/json/issues/133)
+- Splitting source [\#132](https://github.com/nlohmann/json/issues/132)
+- Question about get\_ptr\(\) [\#127](https://github.com/nlohmann/json/issues/127)
+- Visual Studio 14 Debug assertion failed [\#125](https://github.com/nlohmann/json/issues/125)
+- Memory leak in face of exceptions [\#118](https://github.com/nlohmann/json/issues/118)
+- Find and Count for arrays [\#117](https://github.com/nlohmann/json/issues/117)
+- dynamically constructing an arbitrarily nested object [\#114](https://github.com/nlohmann/json/issues/114)
+- Returning any data type [\#113](https://github.com/nlohmann/json/issues/113)
+- Compile error with g++ 4.9.3 cygwin 64-bit [\#112](https://github.com/nlohmann/json/issues/112)
+- insert json array issue with gcc4.8.2 [\#110](https://github.com/nlohmann/json/issues/110)
+- error: unterminated raw string [\#109](https://github.com/nlohmann/json/issues/109)
+- vector\<json\> copy constructor really weird [\#108](https://github.com/nlohmann/json/issues/108)
+- \[clang-3.6.2\] string/sstream with number to json issue [\#107](https://github.com/nlohmann/json/issues/107)
+- maintaining order of keys during iteration [\#106](https://github.com/nlohmann/json/issues/106)
+- object field accessors [\#103](https://github.com/nlohmann/json/issues/103)
+- v8pp and json [\#95](https://github.com/nlohmann/json/issues/95)
+- Wishlist [\#65](https://github.com/nlohmann/json/issues/65)
+- Windows/Visual Studio \(through 2013\) is unsupported [\#62](https://github.com/nlohmann/json/issues/62)
+
+- Replace sprintf with hex function, this fixes \#149 [\#153](https://github.com/nlohmann/json/pull/153) ([whackashoe](https://github.com/whackashoe))
+- Fix character skipping after a surrogate pair [\#146](https://github.com/nlohmann/json/pull/146) ([robertmrk](https://github.com/robertmrk))
+- Detect correctly pointer-to-const [\#137](https://github.com/nlohmann/json/pull/137) ([dariomt](https://github.com/dariomt))
+- disabled "CopyAssignable" test for MSVC in Debug mode, see \#125 [\#131](https://github.com/nlohmann/json/pull/131) ([dariomt](https://github.com/dariomt))
+- removed stream operator for iterator, resolution for \#125 [\#130](https://github.com/nlohmann/json/pull/130) ([dariomt](https://github.com/dariomt))
+- fixed typos in comments for examples [\#129](https://github.com/nlohmann/json/pull/129) ([dariomt](https://github.com/dariomt))
+- Remove superfluous inefficiency [\#126](https://github.com/nlohmann/json/pull/126) ([d-frey](https://github.com/d-frey))
+- remove invalid parameter '-stdlib=libc++' in CMakeLists.txt [\#124](https://github.com/nlohmann/json/pull/124) ([emvivre](https://github.com/emvivre))
+- exception-safe object creation, fixes \#118 [\#122](https://github.com/nlohmann/json/pull/122) ([d-frey](https://github.com/d-frey))
+- Fix small oversight. [\#121](https://github.com/nlohmann/json/pull/121) ([ColinH](https://github.com/ColinH))
+- Overload parse\(\) to accept an rvalue reference [\#120](https://github.com/nlohmann/json/pull/120) ([silverweed](https://github.com/silverweed))
+- Use the right variable name in doc string [\#115](https://github.com/nlohmann/json/pull/115) ([whoshuu](https://github.com/whoshuu))
+
+## [v1.0.0-rc1](https://github.com/nlohmann/json/releases/tag/v1.0.0-rc1) (2015-07-26)
+- Finish documenting the public interface in Doxygen [\#102](https://github.com/nlohmann/json/issues/102)
+- Binary string causes numbers to be dumped as hex [\#101](https://github.com/nlohmann/json/issues/101)
+- failed to iterator json object with reverse\_iterator [\#100](https://github.com/nlohmann/json/issues/100)
+- 'noexcept' : unknown override specifier [\#99](https://github.com/nlohmann/json/issues/99)
+- json float parsing problem [\#98](https://github.com/nlohmann/json/issues/98)
+- Adjust wording to JSON RFC [\#97](https://github.com/nlohmann/json/issues/97)
+- 17 MB / 90 MB repo size!? [\#96](https://github.com/nlohmann/json/issues/96)
+- static analysis warnings [\#94](https://github.com/nlohmann/json/issues/94)
+- reverse\_iterator operator inheritance problem [\#93](https://github.com/nlohmann/json/issues/93)
+- init error [\#92](https://github.com/nlohmann/json/issues/92)
+- access by \(const\) reference [\#91](https://github.com/nlohmann/json/issues/91)
+- is\_integer and is\_float tests [\#90](https://github.com/nlohmann/json/issues/90)
+- Nonstandard integer type [\#89](https://github.com/nlohmann/json/issues/89)
+- static library build [\#84](https://github.com/nlohmann/json/issues/84)
+- lexer::get\_number return NAN [\#82](https://github.com/nlohmann/json/issues/82)
+- MinGW have no std::to\_string [\#80](https://github.com/nlohmann/json/issues/80)
+- Incorrect behaviour of basic\_json::count method [\#78](https://github.com/nlohmann/json/issues/78)
+- Invoking is\_array\(\) function creates "null" value [\#77](https://github.com/nlohmann/json/issues/77)
+- dump\(\) / parse\(\) not idempotent [\#76](https://github.com/nlohmann/json/issues/76)
+- Handle infinity and NaN cases [\#70](https://github.com/nlohmann/json/issues/70)
+- errors in g++-4.8.1 [\#68](https://github.com/nlohmann/json/issues/68)
+- Keys when iterating over objects [\#67](https://github.com/nlohmann/json/issues/67)
+- Compilation results in tons of warnings [\#64](https://github.com/nlohmann/json/issues/64)
+- Complete brief documentation [\#61](https://github.com/nlohmann/json/issues/61)
+- Double quotation mark is not parsed correctly [\#60](https://github.com/nlohmann/json/issues/60)
+- Get coverage back to 100% [\#58](https://github.com/nlohmann/json/issues/58)
+- erase elements using iterators [\#57](https://github.com/nlohmann/json/issues/57)
+- Removing item from array [\#56](https://github.com/nlohmann/json/issues/56)
+- Serialize/Deserialize like PHP? [\#55](https://github.com/nlohmann/json/issues/55)
+- Numbers as keys [\#54](https://github.com/nlohmann/json/issues/54)
+- Why are elements alphabetized on key while iterating? [\#53](https://github.com/nlohmann/json/issues/53)
+- Document erase, count, and iterators key and value [\#52](https://github.com/nlohmann/json/issues/52)
+- Do not use std::to\_string [\#51](https://github.com/nlohmann/json/issues/51)
+- Supported compilers [\#50](https://github.com/nlohmann/json/issues/50)
+- Confused about iterating through json objects [\#49](https://github.com/nlohmann/json/issues/49)
+- Use non-member begin/end [\#48](https://github.com/nlohmann/json/issues/48)
+- Erase key [\#47](https://github.com/nlohmann/json/issues/47)
+- Key iterator [\#46](https://github.com/nlohmann/json/issues/46)
+- Add count member function [\#45](https://github.com/nlohmann/json/issues/45)
+- Problem getting vector \(array\) of strings [\#44](https://github.com/nlohmann/json/issues/44)
+- Compilation error due to assuming that private=public [\#43](https://github.com/nlohmann/json/issues/43)
+- Use of deprecated implicit copy constructor [\#42](https://github.com/nlohmann/json/issues/42)
+- Printing attribute names [\#39](https://github.com/nlohmann/json/issues/39)
+- dumping a small number\_float just outputs 0.000000 [\#37](https://github.com/nlohmann/json/issues/37)
+- find is error [\#32](https://github.com/nlohmann/json/issues/32)
+- Avoid using spaces when encoding without pretty print [\#31](https://github.com/nlohmann/json/issues/31)
+- Cannot encode long numbers [\#30](https://github.com/nlohmann/json/issues/30)
+- segmentation fault when iterating over empty arrays/objects [\#28](https://github.com/nlohmann/json/issues/28)
+- Creating an empty array [\#27](https://github.com/nlohmann/json/issues/27)
+- Custom allocator support [\#25](https://github.com/nlohmann/json/issues/25)
+- make the type of the used string container customizable [\#20](https://github.com/nlohmann/json/issues/20)
+- Improper parsing of JSON string "\\" [\#17](https://github.com/nlohmann/json/issues/17)
+- create a header-only version [\#16](https://github.com/nlohmann/json/issues/16)
+- Don't return "const values" [\#15](https://github.com/nlohmann/json/issues/15)
+- Add to\_string overload for indentation [\#13](https://github.com/nlohmann/json/issues/13)
+- string parser does not recognize uncompliant strings [\#12](https://github.com/nlohmann/json/issues/12)
+- possible double-free in find function [\#11](https://github.com/nlohmann/json/issues/11)
+- UTF-8 encoding/deconding/testing [\#10](https://github.com/nlohmann/json/issues/10)
+- move code into namespace [\#9](https://github.com/nlohmann/json/issues/9)
+- free functions for explicit objects and arrays in initializer lists [\#8](https://github.com/nlohmann/json/issues/8)
+- unique\_ptr for ownership [\#7](https://github.com/nlohmann/json/issues/7)
+- Add unit tests [\#4](https://github.com/nlohmann/json/issues/4)
+- Drop C++98 support [\#3](https://github.com/nlohmann/json/issues/3)
+- Test case coverage [\#2](https://github.com/nlohmann/json/issues/2)
+- Runtime error in Travis job [\#1](https://github.com/nlohmann/json/issues/1)
+
+- Keyword 'inline' is useless when member functions are defined in headers [\#87](https://github.com/nlohmann/json/pull/87) ([ahamez](https://github.com/ahamez))
+- Remove useless typename [\#86](https://github.com/nlohmann/json/pull/86) ([ahamez](https://github.com/ahamez))
+- Avoid warning with Xcode's clang [\#85](https://github.com/nlohmann/json/pull/85) ([ahamez](https://github.com/ahamez))
+-  Fix typos [\#73](https://github.com/nlohmann/json/pull/73) ([aqnouch](https://github.com/aqnouch))
+- Replace `default\_callback` function with `nullptr` and check for null… [\#72](https://github.com/nlohmann/json/pull/72) ([aburgh](https://github.com/aburgh))
+- support enum [\#71](https://github.com/nlohmann/json/pull/71) ([likebeta](https://github.com/likebeta))
+- Fix performance regression introduced with the parsing callback feature. [\#69](https://github.com/nlohmann/json/pull/69) ([aburgh](https://github.com/aburgh))
+- Improve the implementations of the comparission-operators [\#63](https://github.com/nlohmann/json/pull/63) ([Florianjw](https://github.com/Florianjw))
+- Fix compilation of json\_unit with GCC 5 [\#59](https://github.com/nlohmann/json/pull/59) ([dkopecek](https://github.com/dkopecek))
+- Parse streams incrementally. [\#40](https://github.com/nlohmann/json/pull/40) ([aburgh](https://github.com/aburgh))
+- Feature/small float serialization [\#38](https://github.com/nlohmann/json/pull/38) ([jrandall](https://github.com/jrandall))
+- template version with re2c scanner [\#36](https://github.com/nlohmann/json/pull/36) ([nlohmann](https://github.com/nlohmann))
+- more descriptive documentation in example [\#33](https://github.com/nlohmann/json/pull/33) ([luxe](https://github.com/luxe))
+- Fix string conversion under Clang [\#26](https://github.com/nlohmann/json/pull/26) ([wancw](https://github.com/wancw))
+- Fixed dumping of strings [\#24](https://github.com/nlohmann/json/pull/24) ([Teemperor](https://github.com/Teemperor))
+- Added a remark to the readme that coverage is GCC only for now [\#23](https://github.com/nlohmann/json/pull/23) ([Teemperor](https://github.com/Teemperor))
+- Unicode escaping [\#22](https://github.com/nlohmann/json/pull/22) ([Teemperor](https://github.com/Teemperor))
+- Implemented the JSON spec for string parsing for everything but the \uXXXX escaping [\#21](https://github.com/nlohmann/json/pull/21) ([Teemperor](https://github.com/Teemperor))
+- add the std iterator typedefs to iterator and const\_iterator [\#19](https://github.com/nlohmann/json/pull/19) ([kirkshoop](https://github.com/kirkshoop))
+- Fixed escaped quotes [\#18](https://github.com/nlohmann/json/pull/18) ([Teemperor](https://github.com/Teemperor))
+- Fix double delete on std::bad\_alloc exception [\#14](https://github.com/nlohmann/json/pull/14) ([elliotgoodrich](https://github.com/elliotgoodrich))
+- Added CMake and lcov [\#6](https://github.com/nlohmann/json/pull/6) ([Teemperor](https://github.com/Teemperor))
+- Version 2.0 [\#5](https://github.com/nlohmann/json/pull/5) ([nlohmann](https://github.com/nlohmann))
+
+
+
+\* *This Change Log was automatically generated by [github_changelog_generator](https://github.com/skywinder/Github-Changelog-Generator)*

LICENSE.MIT

@@ -1,7 +1,7 @@
-The library is licensed under the MIT License 
+JSON for Modern C++ is licensed under the MIT License 
 <http://opensource.org/licenses/MIT>:
 
-Copyright (c) 2013-2016 Niels Lohmann
+Copyright (c) 2013-2017 Niels Lohmann
 
 Permission is hereby granted, free of charge, to any person obtaining a copy of
 this software and associated documentation files (the "Software"), to deal in

Makefile

@@ -1,28 +1,88 @@
-.PHONY: pretty clean
+.PHONY: pretty clean ChangeLog.md
 
 # used programs
 RE2C = re2c
 SED = sed
 
 # main target
-all: json_unit
+all:
+	$(MAKE) -C test
 
 # clean up
 clean:
-	rm -f json_unit json_benchmarks
+	rm -fr json_unit json_benchmarks fuzz fuzz-testing *.dSYM test/*.dSYM
+	rm -fr benchmarks/files/numbers/*.json
+	$(MAKE) clean -Cdoc
+	$(MAKE) clean -Ctest
 
 
 ##########################################################################
 # unit tests
 ##########################################################################
 
-# additional flags
-FLAGS = -Wall -Wextra -pedantic -Weffc++ -Wcast-align -Wcast-qual -Wctor-dtor-privacy -Wdisabled-optimization -Wformat=2 -Winit-self -Wmissing-declarations -Wmissing-include-dirs -Wold-style-cast -Woverloaded-virtual -Wredundant-decls -Wshadow -Wsign-conversion -Wsign-promo -Wstrict-overflow=5 -Wswitch -Wundef -Wno-unused -Wnon-virtual-dtor -Wreorder -Wdeprecated -Wfloat-equal
-
 # build unit tests
-json_unit: test/unit.cpp src/json.hpp test/catch.hpp
-	$(CXX) -std=c++11 $(CXXFLAGS) $(FLAGS) $(CPPFLAGS) -I src -I test $< $(LDFLAGS) -o $@
+json_unit:
+	@$(MAKE) json_unit -C test
 
+# run unit tests
+check:
+	$(MAKE) check -C test
+
+check-fast:
+	$(MAKE) check -C test TEST_PATTERN=""
+
+
+##########################################################################
+# documentation tests
+##########################################################################
+
+# compile example files and check output
+doctest:
+	$(MAKE) check_output -C doc
+
+
+##########################################################################
+# fuzzing
+##########################################################################
+
+# the overall fuzz testing target
+fuzz_testing:
+	rm -fr fuzz-testing
+	mkdir -p fuzz-testing fuzz-testing/testcases fuzz-testing/out
+	$(MAKE) parse_afl_fuzzer -C test CXX=afl-clang++
+	mv test/parse_afl_fuzzer fuzz-testing/fuzzer
+	find test/data/json_tests -size -5k -name *json | xargs -I{} cp "{}" fuzz-testing/testcases
+	@echo "Execute: afl-fuzz -i fuzz-testing/testcases -o fuzz-testing/out fuzz-testing/fuzzer"
+
+fuzz_testing_cbor:
+	rm -fr fuzz-testing
+	mkdir -p fuzz-testing fuzz-testing/testcases fuzz-testing/out
+	$(MAKE) parse_cbor_fuzzer -C test CXX=afl-clang++
+	mv test/parse_cbor_fuzzer fuzz-testing/fuzzer
+	find test/data -size -5k -name *.cbor | xargs -I{} cp "{}" fuzz-testing/testcases
+	@echo "Execute: afl-fuzz -i fuzz-testing/testcases -o fuzz-testing/out fuzz-testing/fuzzer"
+
+fuzz_testing_msgpack:
+	rm -fr fuzz-testing
+	mkdir -p fuzz-testing fuzz-testing/testcases fuzz-testing/out
+	$(MAKE) parse_msgpack_fuzzer -C test CXX=afl-clang++
+	mv test/parse_msgpack_fuzzer fuzz-testing/fuzzer
+	find test/data -size -5k -name *.msgpack | xargs -I{} cp "{}" fuzz-testing/testcases
+	@echo "Execute: afl-fuzz -i fuzz-testing/testcases -o fuzz-testing/out fuzz-testing/fuzzer"
+
+fuzzing-start:
+	afl-fuzz -S fuzzer1 -i fuzz-testing/testcases -o fuzz-testing/out fuzz-testing/fuzzer > /dev/null &
+	afl-fuzz -S fuzzer2 -i fuzz-testing/testcases -o fuzz-testing/out fuzz-testing/fuzzer > /dev/null &
+	afl-fuzz -S fuzzer3 -i fuzz-testing/testcases -o fuzz-testing/out fuzz-testing/fuzzer > /dev/null &
+	afl-fuzz -S fuzzer4 -i fuzz-testing/testcases -o fuzz-testing/out fuzz-testing/fuzzer > /dev/null &
+	afl-fuzz -S fuzzer5 -i fuzz-testing/testcases -o fuzz-testing/out fuzz-testing/fuzzer > /dev/null &
+	afl-fuzz -S fuzzer6 -i fuzz-testing/testcases -o fuzz-testing/out fuzz-testing/fuzzer > /dev/null &
+	afl-fuzz -S fuzzer7 -i fuzz-testing/testcases -o fuzz-testing/out fuzz-testing/fuzzer > /dev/null &
+	afl-fuzz -M fuzzer0 -i fuzz-testing/testcases -o fuzz-testing/out fuzz-testing/fuzzer
+
+fuzzing-stop:
+	-killall fuzzer
+	-killall afl-fuzz
 
 ##########################################################################
 # static analyzer
@@ -30,7 +90,11 @@ json_unit: test/unit.cpp src/json.hpp test/catch.hpp
 
 # call cppcheck on the main header file
 cppcheck:
-	cppcheck --enable=all --inconclusive --std=c++11 src/json.hpp
+	cppcheck --enable=warning --inconclusive --force --std=c++11 src/json.hpp --error-exitcode=1
+
+# run clang sanitize (we are overrding the CXXFLAGS provided by travis in order to use gcc's libstdc++)
+clang_sanitize: clean
+	CXX=clang++ CXXFLAGS="-g -O2 -fsanitize=address -fsanitize=undefined -fno-omit-frame-pointer" $(MAKE)
 
 
 ##########################################################################
@@ -39,7 +103,7 @@ cppcheck:
 
 # create scanner with re2c
 re2c: src/json.hpp.re2c
-	$(RE2C) -b -s -i --no-generation-date $< | $(SED) '1d' > src/json.hpp
+	$(RE2C) -W --utf-8 --encoding-policy fail --bit-vectors --nested-ifs --no-debug-info $< | $(SED) '1d' > src/json.hpp
 
 # pretty printer
 pretty:
@@ -47,8 +111,9 @@ pretty:
 	   --indent-switches --indent-preproc-block --indent-preproc-define \
 	   --indent-col1-comments --pad-oper --pad-header --align-pointer=type \
 	   --align-reference=type --add-brackets --convert-tabs --close-templates \
-	   --lineend=linux --preserve-date --suffix=none \
-	   src/json.hpp src/json.hpp.re2c test/unit.cpp benchmarks/benchmarks.cpp doc/examples/*.cpp
+	   --lineend=linux --preserve-date --suffix=none --formatted \
+	   src/json.hpp src/json.hpp.re2c test/src/*.cpp \
+	   benchmarks/benchmarks.cpp doc/examples/*.cpp
 
 
 ##########################################################################
@@ -57,5 +122,18 @@ pretty:
 
 # benchmarks
 json_benchmarks: benchmarks/benchmarks.cpp benchmarks/benchpress.hpp benchmarks/cxxopts.hpp src/json.hpp
-	$(CXX) -std=c++11 $(CXXFLAGS) -O3 -flto -I src -I benchmarks $< $(LDFLAGS) -o $@
+	cd benchmarks/files/numbers ; python generate.py
+	$(CXX) -std=c++11 -pthread $(CXXFLAGS) -DNDEBUG -O3 -flto -I src -I benchmarks $< $(LDFLAGS) -o $@
 	./json_benchmarks
+
+
+##########################################################################
+# changelog
+##########################################################################
+
+NEXT_VERSION ?= "unreleased"
+
+ChangeLog.md:
+	github_changelog_generator -o ChangeLog.md --simple-list --release-url https://github.com/nlohmann/json/releases/tag/%s --future-release $(NEXT_VERSION)
+	gsed -i 's|https://github.com/nlohmann/json/releases/tag/HEAD|https://github.com/nlohmann/json/tree/HEAD|' ChangeLog.md
+	gsed -i '2i All notable changes to this project will be documented in this file. This project adheres to [Semantic Versioning](http://semver.org/).' ChangeLog.md

README.md

@@ -1,31 +1,51 @@
-![JSON for Modern C++](https://raw.githubusercontent.com/nlohmann/json/master/doc/json.gif)
+[![JSON for Modern C++](https://raw.githubusercontent.com/nlohmann/json/master/doc/json.gif)](https://github.com/nlohmann/json/releases)
 
 [![Build Status](https://travis-ci.org/nlohmann/json.svg?branch=master)](https://travis-ci.org/nlohmann/json)
-[![Build Status](https://ci.appveyor.com/api/projects/status/1acb366xfyg3qybk?svg=true)](https://ci.appveyor.com/project/nlohmann/json)
+[![Build Status](https://ci.appveyor.com/api/projects/status/1acb366xfyg3qybk/branch/develop?svg=true)](https://ci.appveyor.com/project/nlohmann/json)
+[![Build status](https://doozer.io/badge/nlohmann/json/buildstatus/develop)](https://doozer.io/user/nlohmann/json)
 [![Coverage Status](https://img.shields.io/coveralls/nlohmann/json.svg)](https://coveralls.io/r/nlohmann/json)
-[![Try online](https://img.shields.io/badge/try-online-blue.svg)](http://melpon.org/wandbox/permlink/WSW3gHHE4UcZ9K3G)
-[![Documentation Status](https://img.shields.io/badge/docs-doxygen-blue.svg)](http://nlohmann.github.io/json)
+[![Coverity Scan Build Status](https://scan.coverity.com/projects/5550/badge.svg)](https://scan.coverity.com/projects/nlohmann-json)
+[![Try online](https://img.shields.io/badge/try-online-blue.svg)](http://melpon.org/wandbox/permlink/IoZNMHqubixQx2dN)
+[![Documentation](https://img.shields.io/badge/docs-doxygen-blue.svg)](http://nlohmann.github.io/json)
 [![GitHub license](https://img.shields.io/badge/license-MIT-blue.svg)](https://raw.githubusercontent.com/nlohmann/json/master/LICENSE.MIT)
 [![Github Releases](https://img.shields.io/github/release/nlohmann/json.svg)](https://github.com/nlohmann/json/releases)
 [![Github Issues](https://img.shields.io/github/issues/nlohmann/json.svg)](http://github.com/nlohmann/json/issues)
+[![CII Best Practices](https://bestpractices.coreinfrastructure.org/projects/289/badge)](https://bestpractices.coreinfrastructure.org/projects/289)
+
+- [Design goals](#design-goals)
+- [Integration](#integration)
+- [Examples](#examples)
+  - [JSON as first-class data type](#json-as-first-class-data-type)
+  - [Serialization / Deserialization](#serialization--deserialization)
+  - [STL-like access](#stl-like-access)
+  - [Conversion from STL containers](#conversion-from-stl-containers)
+  - [JSON Pointer and JSON Patch](#json-pointer-and-json-patch)
+  - [Implicit conversions](#implicit-conversions)
+  - [Binary formats (CBOR and MessagePack)](#binary-formats-cbor-and-messagepack)
+- [Supported compilers](#supported-compilers)
+- [License](#license)
+- [Thanks](#thanks)
+- [Notes](#notes)
+- [Execute unit tests](#execute-unit-tests)
 
 ## Design goals
 
 There are myriads of [JSON](http://json.org) libraries out there, and each may even have its reason to exist. Our class had these design goals:
 
-- **Intuitive syntax**. In languages such as Python, JSON feels like a first class data type. We used all the operator magic of modern C++ to achieve the same feeling in your code. Check out the [examples below](#examples) and you know, what I mean.
+- **Intuitive syntax**. In languages such as Python, JSON feels like a first class data type. We used all the operator magic of modern C++ to achieve the same feeling in your code. Check out the [examples below](#examples) and you'll know what I mean.
 
-- **Trivial integration**. Our whole code consists of a single header file `json.hpp`. That's it. No library, no subproject, no dependencies, no complex build system. The class is written in vanilla C++11. All in all, everything should require no adjustment of your compiler flags or project settings.
+- **Trivial integration**. Our whole code consists of a single header file [`json.hpp`](https://github.com/nlohmann/json/blob/develop/src/json.hpp). That's it. No library, no subproject, no dependencies, no complex build system. The class is written in vanilla C++11. All in all, everything should require no adjustment of your compiler flags or project settings.
 
-- **Serious testing**. Our class is heavily [unit-tested](https://github.com/nlohmann/json/blob/master/test/json_unit.cc) and covers [100%](https://coveralls.io/r/nlohmann/json) of the code, including all exceptional behavior. Furthermore, we checked with [Valgrind](http://valgrind.org) that there are no memory leaks.
+- **Serious testing**. Our class is heavily [unit-tested](https://github.com/nlohmann/json/blob/master/test/src/unit.cpp) and covers [100%](https://coveralls.io/r/nlohmann/json) of the code, including all exceptional behavior. Furthermore, we checked with [Valgrind](http://valgrind.org) that there are no memory leaks. To maintain high quality, the project is following the [Core Infrastructure Initiative (CII) best practices](https://bestpractices.coreinfrastructure.org/projects/289).
 
 Other aspects were not so important to us:
 
-- **Memory efficiency**. Each JSON object has an overhead of one pointer (the maximal size of a union) and one enumeration element (1 byte). The default generalization uses the following C++ data types: `std::string` for strings, `int64_t` or `double` for numbers, `std::map` for objects, `std::vector` for arrays, and `bool` for Booleans. However, you can template the generalized class `basic_json` to your needs.
+- **Memory efficiency**. Each JSON object has an overhead of one pointer (the maximal size of a union) and one enumeration element (1 byte). The default generalization uses the following C++ data types: `std::string` for strings, `int64_t`, `uint64_t` or `double` for numbers, `std::map` for objects, `std::vector` for arrays, and `bool` for Booleans. However, you can template the generalized class `basic_json` to your needs.
 
-- **Speed**. We currently implement the parser as naive [recursive descent parser](http://en.wikipedia.org/wiki/Recursive_descent_parser) with hand coded string handling. It is fast enough, but a [LALR-parser](http://en.wikipedia.org/wiki/LALR_parser) with a decent regular expression processor should be even faster (but would consist of more files which makes the integration harder).
+- **Speed**. There are certainly [faster JSON libraries](https://github.com/miloyip/nativejson-benchmark#parsing-time) out there. However, if your goal is to speed up your development by adding JSON support with a single header, then this library is the way to go. If you know how to use a `std::vector` or `std::map`, you are already set.
+
+See the [contribution guidelines](https://github.com/nlohmann/json/blob/master/.github/CONTRIBUTING.md#please-dont) for more information.
 
-See the [https://github.com/nlohmann/json/blob/master/CONTRIBUTING.md#please-dont](contribution guidelines) for more information.
 
 ## Integration
 
@@ -40,21 +60,15 @@ using json = nlohmann::json;
 
 to the files you want to use JSON objects. That's it. Do not forget to set the necessary switches to enable C++11 (e.g., `-std=c++11` for GCC and Clang).
 
-## Supported compilers
-
-Though it's 2016 already, the support for C++11 is still a bit sparse. Currently, the following compilers are known to work:
-
-- GCC 4.9 - 6.0 (and possibly later)
-- Clang 3.4 - 3.8 (and possibly later)
-- Microsoft Visual C++ 14.0 RC (and possibly later)
-
-I would be happy to learn about other compilers/versions.
-
-For GCC running on MinGW or Android SDK, the error `'to_string' is not a member of 'std'` (or similarly, for `strtod`) may occur. Note this is not an issue with the code,  but rather with the compiler itself. Please refer to [this site](http://tehsausage.com/mingw-to-string) and [this discussion](https://github.com/nlohmann/json/issues/136) for information on how to fix this bug.
+:beer: If you are using OS X and [Homebrew](http://brew.sh), just type `brew tap nlohmann/json` and `brew install nlohmann_json` and you're set. If you want the bleeding edge rather than the latest release, use `brew install nlohmann_json --HEAD`.
 
 
 ## Examples
 
+Beside the examples below, you may want to check the [documentation](https://nlohmann.github.io/json/) where each function contains a separate code example (e.g., check out [`emplace()`](https://nlohmann.github.io/json/classnlohmann_1_1basic__json_a602f275f0359ab181221384989810604.html#a602f275f0359ab181221384989810604)). All [example files](https://github.com/nlohmann/json/tree/develop/doc/examples) can be compiled and executed on their own (e.g., file [emplace.cpp](https://github.com/nlohmann/json/blob/develop/doc/examples/emplace.cpp)).
+
+### JSON as first-class data type
+
 Here are some examples to give you an idea how to use the class.
 
 Assume you want to create the JSON object
@@ -134,15 +148,18 @@ json empty_object_explicit = json::object();
 json array_not_object = { json::array({"currency", "USD"}), json::array({"value", 42.99}) };
 ```
 
+
 ### Serialization / Deserialization
 
+#### To/from strings
+
 You can create an object (deserialization) by appending `_json` to a string literal:
 
 ```cpp
 // create object from string literal
 json j = "{ \"happy\": true, \"pi\": 3.141 }"_json;
 
-// or even nicer (thanks http://isocpp.org/blog/2015/01/json-for-modern-cpp)
+// or even nicer with a raw string literal
 auto j2 = R"(
   {
     "happy": true,
@@ -169,6 +186,8 @@ std::cout << j.dump(4) << std::endl;
 // }
 ```
 
+#### To/from streams (e.g. files, string streams)
+
 You can also use streams to serialize and deserialize:
 
 ```cpp
@@ -183,7 +202,37 @@ std::cout << j;
 std::cout << std::setw(4) << j << std::endl;
 ```
 
-These operators work for any subclasses of `std::istream` or `std::ostream`.
+These operators work for any subclasses of `std::istream` or `std::ostream`. Here is the same example with files:
+
+```cpp
+// read a JSON file
+std::ifstream i("file.json");
+json j;
+i >> j;
+
+// write prettified JSON to another file
+std::ofstream o("pretty.json");
+o << std::setw(4) << j << std::endl;
+```
+
+Please note that setting the exception bit for `failbit` is inappropriate for this use case. It will result in program termination due to the `noexcept` specifier in use.
+
+#### Read from iterator range
+
+You can also read JSON from an iterator range; that is, from any container accessible by iterators whose content is stored as contiguous byte sequence, for instance a `std::vector<uint8_t>`:
+
+```cpp
+std::vector<uint8_t> v = {'t', 'r', 'u', 'e'};
+json j = json::parse(v.begin(), v.end());
+```
+
+You may leave the iterators for the range [begin, end):
+
+```cpp
+std::vector<uint8_t> v = {'t', 'r', 'u', 'e'};
+json j = json::parse(v);
+```
+
 
 ### STL-like access
 
@@ -196,13 +245,16 @@ j.push_back("foo");
 j.push_back(1);
 j.push_back(true);
 
+// also use emplace_back
+j.emplace_back(1.78);
+
 // iterate the array
 for (json::iterator it = j.begin(); it != j.end(); ++it) {
   std::cout << *it << '\n';
 }
 
 // range-based for
-for (auto element : j) {
+for (auto& element : j) {
   std::cout << element << '\n';
 }
 
@@ -234,6 +286,9 @@ o["foo"] = 23;
 o["bar"] = false;
 o["baz"] = 3.141;
 
+// also use emplace
+o.emplace("weather", "sunny");
+
 // special iterator member functions for objects
 for (json::iterator it = o.begin(); it != o.end(); ++it) {
   std::cout << it.key() << " : " << it.value() << "\n";
@@ -252,6 +307,7 @@ int fob_present = o.count("fob"); // 0
 o.erase("foo");
 ```
 
+
 ### Conversion from STL containers
 
 Any sequence container (`std::array`, `std::vector`, `std::deque`, `std::forward_list`, `std::list`) whose values can be used to construct JSON types (e.g., integers, floating point numbers, Booleans, string types, or again STL containers described in this section) can be used to create a JSON array. The same holds for similar associative containers (`std::set`, `std::multiset`, `std::unordered_set`, `std::unordered_multiset`), but in these cases the order of the elements of the array depends how the elements are ordered in the respective STL container.
@@ -286,20 +342,20 @@ json j_uset(c_uset); // only one entry for "one" is used
 // maybe ["two", "three", "four", "one"]
 
 std::multiset<std::string> c_mset {"one", "two", "one", "four"};
-json j_mset(c_mset); // only one entry for "one" is used
-// maybe ["one", "two", "four"]
+json j_mset(c_mset); // both entries for "one" are used
+// maybe ["one", "two", "one", "four"]
 
 std::unordered_multiset<std::string> c_umset {"one", "two", "one", "four"};
 json j_umset(c_umset); // both entries for "one" are used
 // maybe ["one", "two", "one", "four"]
 ```
 
-Likewise, any associative key-value containers (`std::map`, `std::multimap`, `std::unordered_map`, `std::unordered_multimap`) whose keys are can construct an `std::string` and whose values can be used to construct JSON types (see examples above) can be used to to create a JSON object. Note that in case of multimaps only one key is used in the JSON object and the value depends on the internal order of the STL container.
+Likewise, any associative key-value containers (`std::map`, `std::multimap`, `std::unordered_map`, `std::unordered_multimap`) whose keys can construct an `std::string` and whose values can be used to construct JSON types (see examples above) can be used to to create a JSON object. Note that in case of multimaps only one key is used in the JSON object and the value depends on the internal order of the STL container.
 
 ```cpp
 std::map<std::string, int> c_map { {"one", 1}, {"two", 2}, {"three", 3} };
 json j_map(c_map);
-// {"one": 1, "two": 2, "three": 3}
+// {"one": 1, "three": 3, "two": 2 }
 
 std::unordered_map<const char*, double> c_umap { {"one", 1.2}, {"two", 2.3}, {"three", 3.4} };
 json j_umap(c_umap);
@@ -314,12 +370,51 @@ json j_ummap(c_ummap); // only one entry for key "three" is used
 // maybe {"one": true, "two": true, "three": true}
 ```
 
+### JSON Pointer and JSON Patch
+
+The library supports **JSON Pointer** ([RFC 6901](https://tools.ietf.org/html/rfc6901)) as alternative means to address structured values. On top of this, **JSON Patch** ([RFC 6902](https://tools.ietf.org/html/rfc6902)) allows to describe differences between two JSON values - effectively allowing patch and diff operations known from Unix.
+
+```cpp
+// a JSON value
+json j_original = R"({
+  "baz": ["one", "two", "three"],
+  "foo": "bar"
+})"_json;
+
+// access members with a JSON pointer (RFC 6901)
+j_original["/baz/1"_json_pointer];
+// "two"
+
+// a JSON patch (RFC 6902)
+json j_patch = R"([
+  { "op": "replace", "path": "/baz", "value": "boo" },
+  { "op": "add", "path": "/hello", "value": ["world"] },
+  { "op": "remove", "path": "/foo"}
+])"_json;
+
+// apply the patch
+json j_result = j_original.patch(j_patch);
+// {
+//    "baz": "boo",
+//    "hello": ["world"]
+// }
+
+// calculate a JSON patch from two JSON values
+json::diff(j_result, j_original);
+// [
+//   { "op":" replace", "path": "/baz", "value": ["one", "two", "three"] },
+//   { "op": "remove","path": "/hello" },
+//   { "op": "add", "path": "/foo", "value": "bar" }
+// ]
+```
+
+
 ### Implicit conversions
 
 The type of the JSON object is determined automatically by the expression to store. Likewise, the stored value is implicitly converted.
 
 ```cpp
-/// strings
+// strings
 std::string s1 = "Hello, world!";
 json js = s1;
 std::string s2 = js;
@@ -347,6 +442,79 @@ int vi = jn.get<int>();
 // etc.
 ```
 
+### Binary formats (CBOR and MessagePack)
+
+Though JSON is a ubiquitous data format, it is not a very compact format suitable for data exchange, for instance over a network. Hence, the library supports [CBOR](http://cbor.io) (Concise Binary Object Representation) and [MessagePack](http://msgpack.org) to efficiently encode JSON values to byte vectors and to decode such vectors.
+
+```cpp
+// create a JSON value
+json j = R"({"compact": true, "schema": 0})"_json;
+
+// serialize to CBOR
+std::vector<uint8_t> v_cbor = json::to_cbor(j);
+
+// 0xa2, 0x67, 0x63, 0x6f, 0x6d, 0x70, 0x61, 0x63, 0x74, 0xf5, 0x66, 0x73, 0x63, 0x68, 0x65, 0x6d, 0x61, 0x00
+
+// roundtrip
+json j_from_cbor = json::from_cbor(v_cbor);
+
+// serialize to MessagePack
+std::vector<uint8_t> v_msgpack = json::to_msgpack(j);
+
+// 0x82, 0xa7, 0x63, 0x6f, 0x6d, 0x70, 0x61, 0x63, 0x74, 0xc3, 0xa6, 0x73, 0x63, 0x68, 0x65, 0x6d, 0x61, 0x00
+
+// roundtrip
+json j_from_msgpack = json::from_msgpack(v_msgpack);
+```
+
+
+## Supported compilers
+
+Though it's 2016 already, the support for C++11 is still a bit sparse. Currently, the following compilers are known to work:
+
+- GCC 4.9 - 6.0 (and possibly later)
+- Clang 3.4 - 3.9 (and possibly later)
+- Microsoft Visual C++ 2015 / Build Tools 14.0.25123.0 (and possibly later)
+
+I would be happy to learn about other compilers/versions.
+
+Please note:
+
+- GCC 4.8 does not work because of two bugs ([55817](https://gcc.gnu.org/bugzilla/show_bug.cgi?id=55817) and [57824](https://gcc.gnu.org/bugzilla/show_bug.cgi?id=57824)) in the C++11 support. Note there is a [pull request](https://github.com/nlohmann/json/pull/212) to fix some of the issues.
+- Android defaults to using very old compilers and C++ libraries. To fix this, add the following to your `Application.mk`. This will switch to the LLVM C++ library, the Clang compiler, and enable C++11 and other features disabled by default.
+ 
+    ```
+    APP_STL := c++_shared
+    NDK_TOOLCHAIN_VERSION := clang3.6
+    APP_CPPFLAGS += -frtti -fexceptions
+    ```
+ 
+    The code compiles successfully with [Android NDK](https://developer.android.com/ndk/index.html?hl=ml), Revision 9 - 11 (and possibly later) and [CrystaX's Android NDK](https://www.crystax.net/en/android/ndk) version 10.
+
+- For GCC running on MinGW or Android SDK, the error `'to_string' is not a member of 'std'` (or similarly, for `strtod`) may occur. Note this is not an issue with the code,  but rather with the compiler itself. On Android, see above to build with a newer environment.  For MinGW, please refer to [this site](http://tehsausage.com/mingw-to-string) and [this discussion](https://github.com/nlohmann/json/issues/136) for information on how to fix this bug. For Android NDK using `APP_STL := gnustl_static`, please refer to [this discussion](https://github.com/nlohmann/json/issues/219).
+
+The following compilers are currently used in continuous integration at [Travis](https://travis-ci.org/nlohmann/json) and [AppVeyor](https://ci.appveyor.com/project/nlohmann/json):
+
+| Compiler        | Operating System             | Version String |
+|-----------------|------------------------------|----------------|
+| GCC 4.9.3       | Ubuntu 14.04.4 LTS           | g++-4.9 (Ubuntu 4.9.3-8ubuntu2~14.04) 4.9.3 |
+| GCC 5.3.0       | Ubuntu 14.04.4 LTS           | g++-5 (Ubuntu 5.3.0-3ubuntu1~14.04) 5.3.0 20151204 |
+| GCC 6.1.1       | Ubuntu 14.04.4 LTS           | g++-6 (Ubuntu 6.1.1-3ubuntu11~14.04.1) 6.1.1 20160511 |
+| Clang 3.6.0     | Ubuntu 14.04.4 LTS           | clang version 3.6.0 (tags/RELEASE_360/final) |
+| Clang 3.6.1     | Ubuntu 14.04.4 LTS           | clang version 3.6.1 (tags/RELEASE_361/final) |
+| Clang 3.6.2     | Ubuntu 14.04.4 LTS           | clang version 3.6.2 (tags/RELEASE_362/final) |
+| Clang 3.7.0     | Ubuntu 14.04.4 LTS           | clang version 3.7.0 (tags/RELEASE_370/final) |
+| Clang 3.7.1     | Ubuntu 14.04.4 LTS           | clang version 3.7.1 (tags/RELEASE_371/final) |
+| Clang 3.8.0     | Ubuntu 14.04.4 LTS           | clang version 3.8.0 (tags/RELEASE_380/final) |
+| Clang 3.8.1     | Ubuntu 14.04.4 LTS           | clang version 3.8.1 (tags/RELEASE_381/final) |
+| Clang Xcode 6.4 | Darwin Kernel Version 14.3.0 (OSX 10.10.3) | Apple LLVM version 6.1.0 (clang-602.0.53) (based on LLVM 3.6.0svn) |
+| Clang Xcode 7.3 | Darwin Kernel Version 15.0.0 (OSX 10.10.5) | Apple LLVM version 7.3.0 (clang-703.0.29) |
+| Clang Xcode 8.0 | Darwin Kernel Version 15.6.0 | Apple LLVM version 8.0.0 (clang-800.0.38) |
+| Clang Xcode 8.1 | Darwin Kernel Version 16.1.0 (macOS 10.12.1) | Apple LLVM version 8.0.0 (clang-800.0.42.1) |
+| Clang Xcode 8.2 | Darwin Kernel Version 16.1.0 (macOS 10.12.1) | Apple LLVM version 8.0.0 (clang-800.0.42.1) |
+| Visual Studio 14 2015 | Windows Server 2012 R2 (x64) | Microsoft (R) Build Engine version 14.0.25123.0 | 
+
+
 ## License
 
 <img align="right" src="http://opensource.org/trademarks/opensource/OSI-Approved-License-100x137.png">
@@ -355,11 +523,12 @@ The class is licensed under the [MIT License](http://opensource.org/licenses/MIT
 
 Copyright &copy; 2013-2016 [Niels Lohmann](http://nlohmann.me)
 
-Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
 
 The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
 
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
 
 ## Thanks
 
@@ -390,24 +559,68 @@ I deeply appreciate the help of the following people.
 - [406345](https://github.com/406345) fixed two small warnings.
 - [Glen Fernandes](https://github.com/glenfe) noted a potential portability problem in the `has_mapped_type` function.
 - [Corbin Hughes](https://github.com/nibroc) fixed some typos in the contribution guidelines.
-- [twelsby](https://github.com/twelsby) fixed the array subscript operator, an issue that failed the MSVC build, and floating-point parsing/dumping.
+- [twelsby](https://github.com/twelsby) fixed the array subscript operator, an issue that failed the MSVC build, and floating-point parsing/dumping. He further added support for unsigned integer numbers and implemented better roundtrip support for parsed numbers.
+- [Volker Diels-Grabsch](https://github.com/vog) fixed a link in the README file.
+- [msm-](https://github.com/msm-) added support for american fuzzy lop. 
+- [Annihil](https://github.com/Annihil) fixed an example in the README file.
+- [Themercee](https://github.com/Themercee) noted a wrong URL in the README file.
+- [Lv Zheng](https://github.com/lv-zheng) fixed a namespace issue with `int64_t` and `uint64_t`.
+- [abc100m](https://github.com/abc100m) analyzed the issues with GCC 4.8 and proposed a [partial solution](https://github.com/nlohmann/json/pull/212).
+- [zewt](https://github.com/zewt) added useful notes to the README file about Android.
+- [Róbert Márki](https://github.com/robertmrk) added a fix to use move iterators and improved the integration via CMake.
+- [Chris Kitching](https://github.com/ChrisKitching) cleaned up the CMake files.
+- [Tom Needham](https://github.com/06needhamt) fixed a subtle bug with MSVC 2015 which was also proposed by [Michael K.](https://github.com/Epidal).
+- [Mário Feroldi](https://github.com/thelostt) fixed a small typo.
+- [duncanwerner](https://github.com/duncanwerner) found a really embarrassing performance regression in the 2.0.0 release.
+- [Damien](https://github.com/dtoma) fixed one of the last conversion warnings.
+- [Thomas Braun](https://github.com/t-b) fixed a warning in a test case.
+- [Théo DELRIEU](https://github.com/theodelrieu) patiently and constructively oversaw the long way toward [iterator-range parsing](https://github.com/nlohmann/json/issues/290).
+- [Stefan](https://github.com/5tefan) fixed a minor issue in the documentation.
+- [Vasil Dimov](https://github.com/vasild) fixed the documentation regarding conversions from `std::multiset`.
+- [ChristophJud](https://github.com/ChristophJud) overworked the CMake files to ease project inclusion.
+- [Vladimir Petrigo](https://github.com/vpetrigo) made a SFINAE hack more readable.
+- [Denis Andrejew](https://github.com/seeekr) fixed a grammar issue in the README file.
+- [Pierre-Antoine Lacaze](https://github.com/palacaze) found a subtle bug in the `dump()` function.
+- [TurpentineDistillery](https://github.com/TurpentineDistillery) pointed to [`std::locale::classic()`](http://en.cppreference.com/w/cpp/locale/locale/classic) to avoid too much locale joggling, found some nice performance improvements in the parser and improved the benchmarking code.
+- [cgzones](https://github.com/cgzones) had an idea how to fix the Coverity scan.
+- [Jared Grubb](https://github.com/jaredgrubb) silenced a nasty documentation warning.
+- [Yixin Zhang](https://github.com/qwename) fixed an integer overflow check.
+- [Bosswestfalen](https://github.com/Bosswestfalen) merged two iterator classes into a smaller one.
+- [Daniel599](https://github.com/Daniel599) helped to get Travis execute the tests with Clang's sanitizers.
 
 Thanks a lot for helping out!
 
+
 ## Notes
 
-- The code contains numerous debug assertions which can be switched off by defining the preprocessor macro `NDEBUG`, see the [documentation of `assert`](http://en.cppreference.com/w/cpp/error/assert).
+- The code contains numerous debug **assertions** which can be switched off by defining the preprocessor macro `NDEBUG`, see the [documentation of `assert`](http://en.cppreference.com/w/cpp/error/assert). In particular, note [`operator[]`](https://nlohmann.github.io/json/classnlohmann_1_1basic__json_a2e26bd0b0168abb61f67ad5bcd5b9fa1.html#a2e26bd0b0168abb61f67ad5bcd5b9fa1) implements **unchecked access** for const objects: If the given key is not present, the behavior is undefined (think of a dereferenced null pointer) and yields an [assertion failure](https://github.com/nlohmann/json/issues/289) if assertions are switched on. If you are not sure whether an element in an object exists, use checked access with the [`at()` function](https://nlohmann.github.io/json/classnlohmann_1_1basic__json_a674de1ee73e6bf4843fc5dc1351fb726.html#a674de1ee73e6bf4843fc5dc1351fb726).
+- As the exact type of a number is not defined in the [JSON specification](http://rfc7159.net/rfc7159), this library tries to choose the best fitting C++ number type automatically. As a result, the type `double` may be used to store numbers which may yield [**floating-point exceptions**](https://github.com/nlohmann/json/issues/181) in certain rare situations if floating-point exceptions have been unmasked in the calling code. These exceptions are not caused by the library and need to be fixed in the calling code, such as by re-masking the exceptions prior to calling library functions.
+- The library supports **Unicode input** as follows:
+  - Only **UTF-8** encoded input is supported which is the default encoding for JSON according to [RFC 7159](http://rfc7159.net/rfc7159#rfc.section.8.1).
+  - Other encodings such as Latin-1, UTF-16, or UTF-32 are not supported and will yield parse errors.
+  - [Unicode noncharacters](http://www.unicode.org/faq/private_use.html#nonchar1) will not be replaced by the library.
+  - Invalid surrogates (e.g., incomplete pairs such as `\uDEAD`) will yield parse errors.
+
 
 ## Execute unit tests
 
 To compile and run the tests, you need to execute
 
 ```sh
-$ make
-$ ./json_unit "*"
+$ make check
 
 ===============================================================================
-All tests passed (3343329 assertions in 29 test cases)
+All tests passed (11202040 assertions in 44 test cases)
+```
+
+Alternatively, you can use [CMake](https://cmake.org) and run
+
+```sh
+$ mkdir build
+$ cd build
+$ cmake ..
+$ make
+$ ctest
 ```
 
 For more information, have a look at the file [.travis.yml](https://github.com/nlohmann/json/blob/master/.travis.yml).

appveyor.yml

@@ -7,5 +7,4 @@ build_script:
 - cmake . -G "Visual Studio 14 2015"
 - cmake --build . --config Release
 test_script:
-- Release\json_unit.exe
-- Release\json_unit.exe "*"
+- ctest -C Release -V

benchmarks/benchmarks.cpp

@@ -1,77 +1,118 @@
 #define BENCHPRESS_CONFIG_MAIN
 
 #include <fstream>
+#include <sstream>
 #include <benchpress.hpp>
 #include <json.hpp>
+#include <pthread.h>
+#include <thread>
 
-BENCHMARK("parse jeopardy.json", [](benchpress::context* ctx)
+using json = nlohmann::json;
+
+struct StartUp
 {
-    for (size_t i = 0; i < ctx->num_iterations(); ++i)
+    StartUp()
     {
-        std::ifstream input_file("benchmarks/files/jeopardy/jeopardy.json");
-        nlohmann::json j;
-        j << input_file;
+#ifndef __llvm__
+        // pin thread to a single CPU
+        cpu_set_t cpuset;
+        pthread_t thread;
+        thread = pthread_self();
+        CPU_ZERO(&cpuset);
+        CPU_SET(std::thread::hardware_concurrency() - 1, &cpuset);
+        pthread_setaffinity_np(thread, sizeof(cpu_set_t), &cpuset);
+#endif
     }
-})
+};
+StartUp startup;
 
-BENCHMARK("parse canada.json", [](benchpress::context* ctx)
+enum class EMode { input, output_no_indent, output_with_indent };
+
+static void bench(benchpress::context& ctx,
+                  const std::string& in_path,
+                  const EMode mode)
 {
-    for (size_t i = 0; i < ctx->num_iterations(); ++i)
+    // using string streams for benchmarking to factor-out cold-cache disk
+    // access.
+    std::stringstream istr;
     {
-        std::ifstream input_file("benchmarks/files/nativejson-benchmark/canada.json");
-        nlohmann::json j;
-        j << input_file;
-    }
-})
+        // read file into string stream
+        std::ifstream input_file(in_path);
+        istr << input_file.rdbuf();
+        input_file.close();
 
-BENCHMARK("parse citm_catalog.json", [](benchpress::context* ctx)
-{
-    for (size_t i = 0; i < ctx->num_iterations(); ++i)
-    {
-        std::ifstream input_file("benchmarks/files/nativejson-benchmark/citm_catalog.json");
-        nlohmann::json j;
-        j << input_file;
-    }
-})
-
-BENCHMARK("parse twitter.json", [](benchpress::context* ctx)
-{
-    for (size_t i = 0; i < ctx->num_iterations(); ++i)
-    {
-        std::ifstream input_file("benchmarks/files/nativejson-benchmark/twitter.json");
-        nlohmann::json j;
-        j << input_file;
-    }
-})
-
-BENCHMARK("dump jeopardy.json", [](benchpress::context* ctx)
-{
-    std::ifstream input_file("benchmarks/files/jeopardy/jeopardy.json");
-    nlohmann::json j;
-    j << input_file;
-    std::ofstream output_file("jeopardy.dump.json");
-
-    ctx->reset_timer();
-    for (size_t i = 0; i < ctx->num_iterations(); ++i)
-    {
-        output_file << j;
+        // read the stream once
+        json j;
+        j << istr;
+        // clear flags and rewind
+        istr.clear();
+        istr.seekg(0);
     }
 
-    std::remove("jeopardy.dump.json");
-})
-
-BENCHMARK("dump jeopardy.json with indent", [](benchpress::context* ctx)
-{
-    std::ifstream input_file("benchmarks/files/jeopardy/jeopardy.json");
-    nlohmann::json j;
-    j << input_file;
-    std::ofstream output_file("jeopardy.dump.json");
-
-    ctx->reset_timer();
-    for (size_t i = 0; i < ctx->num_iterations(); ++i)
+    switch (mode)
     {
-        output_file << std::setw(4) << j;
-    }
+        // benchmarking input
+        case EMode::input:
+        {
+            ctx.reset_timer();
 
-    std::remove("jeopardy.dump.json");
-})
+            for (size_t i = 0; i < ctx.num_iterations(); ++i)
+            {
+                // clear flags and rewind
+                istr.clear();
+                istr.seekg(0);
+                json j;
+                j << istr;
+            }
+
+            break;
+        }
+
+        // benchmarking output
+        case EMode::output_no_indent:
+        case EMode::output_with_indent:
+        {
+            // create JSON value from input
+            json j;
+            j << istr;
+            std::stringstream ostr;
+
+            ctx.reset_timer();
+            for (size_t i = 0; i < ctx.num_iterations(); ++i)
+            {
+                if (mode == EMode::output_no_indent)
+                {
+                    ostr << j;
+                }
+                else
+                {
+                    ostr << std::setw(4) << j;
+                }
+
+                // reset data
+                ostr.str(std::string());
+            }
+
+            break;
+        }
+    }
+}
+
+#define BENCHMARK_I(mode, title, in_path)           \
+    BENCHMARK((title), [](benchpress::context* ctx) \
+    {                                               \
+        bench(*ctx, (in_path), (mode));             \
+    })
+
+BENCHMARK_I(EMode::input, "parse jeopardy.json",              "benchmarks/files/jeopardy/jeopardy.json");
+BENCHMARK_I(EMode::input, "parse canada.json",                "benchmarks/files/nativejson-benchmark/canada.json");
+BENCHMARK_I(EMode::input, "parse citm_catalog.json",          "benchmarks/files/nativejson-benchmark/citm_catalog.json");
+BENCHMARK_I(EMode::input, "parse twitter.json",               "benchmarks/files/nativejson-benchmark/twitter.json");
+BENCHMARK_I(EMode::input, "parse numbers/floats.json",        "benchmarks/files/numbers/floats.json");
+BENCHMARK_I(EMode::input, "parse numbers/signed_ints.json",   "benchmarks/files/numbers/signed_ints.json");
+BENCHMARK_I(EMode::input, "parse numbers/unsigned_ints.json", "benchmarks/files/numbers/unsigned_ints.json");
+
+BENCHMARK_I(EMode::output_no_indent,   "dump jeopardy.json",             "benchmarks/files/jeopardy/jeopardy.json");
+BENCHMARK_I(EMode::output_with_indent, "dump jeopardy.json with indent", "benchmarks/files/jeopardy/jeopardy.json");
+BENCHMARK_I(EMode::output_no_indent,   "dump numbers/floats.json",       "benchmarks/files/numbers/floats.json");
+BENCHMARK_I(EMode::output_no_indent,   "dump numbers/signed_ints.json",  "benchmarks/files/numbers/signed_ints.json");

benchmarks/files/numbers/generate.py

@@ -0,0 +1,25 @@
+#!/usr/bin/env python
+
+import json
+import random
+import sys
+
+random.seed(0)
+
+# floats
+result_floats = []
+for x in range(0, 1000000):
+	result_floats.append(random.uniform(-100000000.0, 100000000.0))
+json.dump(result_floats, open("floats.json", "w"), indent=2)
+
+# unsigned integers
+result_uints = []
+for x in range(0, 1000000):
+	result_uints.append(random.randint(0, 18446744073709551615))
+json.dump(result_uints, open("unsigned_ints.json", "w"), indent=2)
+
+# signed integers
+result_sints = []
+for x in range(0, 1000000):
+	result_sints.append(random.randint(-9223372036854775808, 9223372036854775807))
+json.dump(result_sints, open("signed_ints.json", "w"), indent=2)

cmake/config.cmake.in

@@ -0,0 +1,7 @@
+@PACKAGE_INIT@
+set_and_check(JSON_INCLUDE_DIR "@PACKAGE_JSON_INCLUDE_DESTINATION@")
+
+cmake_policy(PUSH)
+cmake_policy(SET CMP0024 OLD)
+include(${CMAKE_CURRENT_LIST_DIR}/@JSON_TARGETS_FILENAME@)
+cmake_policy(POP)

doc/ChangeLog.md

@@ -1,45 +0,0 @@
-# JSON for Modern C++
-
-## Version 1.0.0
-
-- Release date: 2015-12-28
-- MD5: 331c30e4407ecdcf591e9e3ed85100d0
-
-### Summary
-
-This is the first official release. Compared to the [prerelease version 1.0.0-rc1](https://github.com/nlohmann/json/releases/tag/v1.0.0-rc1), only a few minor improvements have been made:
-
-### Changes
-
-- *Changed*: A **UTF-8 byte order mark** is silently ignored.
-- *Changed*: `sprintf` is no longer used.
-- *Changed*: `iterator_wrapper` also works for const objects; note: the name may change!
-- *Changed*: **Error messages** during deserialization have been improved.
-- *Added*: The `parse` function now also works with type `std::istream&&`.
-- *Added*: Function `value(key, default_value)` returns either a copy of an object's element at the specified key or a given default value if no element with the key exists.
-- *Added*: Public functions are tagged with the version they were introduced. This shall allow for better **versioning** in the future.
-- *Added*: All public functions and types are **documented** (see http://nlohmann.github.io/json/) including executable examples.
-- *Added*: Allocation of all types (in particular arrays, strings, and objects) is now exception-safe.
-- *Added*: They descriptions of thrown exceptions have been overworked and are part of the tests suite and documentation.
-
-## Version 1.0.0-rc1
-
-- Release date: 2015-07-26
-- MD5: fac5948417ed49bfd0852a0e9dd36935
-
-### Summary
-
-The 1.0.0 release should be the first "official" release after the initial announcement of the class in January 2015 via reddit ("0.1.0") and a heavily overworked second version ("0.2.0") in February.
-
-### Changes
-
-- *Changed:* In the generic class `basic_json`, all JSON value types (array, object, string, bool, integer number, and floating-point) are now **templated**. That is, you can choose whether you like a `std::list` for your arrays or an `std::unordered_map` for your objects. The specialization `json` sets some reasonable defaults.
-- *Changed:* The library now consists of a **single header**, called `json.hpp`. Consequently, build systems such as Automake or CMake are not any longer required.
-- *Changed:* The **deserialization** is now supported by a lexer generated with [re2c](http://re2c.org) from file [`src/json.hpp.re2c`](https://github.com/nlohmann/json/blob/master/src/json.hpp.re2c). As a result, we strictly follow the JSON specification. Note neither the tool re2c nor its input are required to use the class.
-- *Added:* The library now satisfies the [**ReversibleContainer**](http://en.cppreference.com/w/cpp/concept/ReversibleContainer) requirement. It hence provides four different iterators (`iterator`, `const_iterator`, `reverse_iterator`, and `const_reverse_iterator`), comparison functions, `swap()`, `size()`, `max_size()`, and `empty()` member functions.
-- *Added*: The class uses **user-defined allocators** which default to `std::allocator`, but can be templated via parameter `Allocator`.
-- *Added:* To simplify pretty-printing, the `std::setw` **stream manipulator** has been overloaded to set the desired indentation. Pretty-printing a JSON object `j` is as simple as `std::cout << std::setw(4) << j << '\n'`.
-- *Changed*: The type `json::value_t::number` is now called `json::value_t::number_integer` to be more symmetric compared to `json::value_t::number_float`.
--  *Added*: The documentation is generated with Doxygen and hosted at [nlohmann.github.io/json](http://nlohmann.github.io/json/). Every public member function is thoroughly described including an example which also can be [tried online](http://melpon.org/wandbox/permlink/GnGKwji06WeVonlI).
-- *Added*: The class is heavily unit-tested (3341774 assertions) and has a [line coverage of 100%](https://coveralls.io/github/nlohmann/json). With every commit, the code is compiled with g++ 4.9, g++ 5.0, Clang 3.6 (thanks to [Travis CI](https://travis-ci.org/nlohmann/json)), and Microsoft Visual Studio 14 2015 (thanks to [AppVeyor](https://ci.appveyor.com/project/nlohmann/json)).
-

doc/Doxyfile

@@ -5,7 +5,7 @@
 #---------------------------------------------------------------------------
 DOXYFILE_ENCODING      = UTF-8
 PROJECT_NAME           = "JSON for Modern C++"
-PROJECT_NUMBER         = 1.1.0
+PROJECT_NUMBER         = 2.0.10
 PROJECT_BRIEF          = 
 PROJECT_LOGO           =
 OUTPUT_DIRECTORY       = .
@@ -30,6 +30,7 @@ TAB_SIZE               = 4
 ALIASES                = "complexity=@par Complexity\n"
 ALIASES                += liveexample{2}="@par Example\n \1 \n @includelineno \2.cpp \n Output (play with this example @htmlinclude \2.link):\n @verbinclude \2.output \n The example code above can be translated with @verbatim g++ -std=c++11 -Isrc doc/examples/\2.cpp -o \2 @endverbatim"
 ALIASES                += requirement="@par Requirements\n"
+ALIASES                += exceptionsafety="@par Exception safety\n"
 TCL_SUBST              =
 OPTIMIZE_OUTPUT_FOR_C  = NO
 OPTIMIZE_OUTPUT_JAVA   = NO
@@ -101,7 +102,7 @@ WARN_LOGFILE           =
 #---------------------------------------------------------------------------
 # Configuration options related to the input files
 #---------------------------------------------------------------------------
-INPUT                  = ../src/json.hpp
+INPUT                  = ../src/json.hpp index.md
 INPUT_ENCODING         = UTF-8
 FILE_PATTERNS          =
 RECURSIVE              = NO
@@ -117,7 +118,7 @@ INPUT_FILTER           =
 FILTER_PATTERNS        =
 FILTER_SOURCE_FILES    = NO
 FILTER_SOURCE_PATTERNS =
-USE_MDFILE_AS_MAINPAGE =
+USE_MDFILE_AS_MAINPAGE = index.md
 #---------------------------------------------------------------------------
 # Configuration options related to source browsing
 #---------------------------------------------------------------------------
@@ -235,7 +236,7 @@ MAN_LINKS              = NO
 #---------------------------------------------------------------------------
 # Configuration options related to the XML output
 #---------------------------------------------------------------------------
-GENERATE_XML           = NO
+GENERATE_XML           = YES
 XML_OUTPUT             = xml
 XML_PROGRAMLISTING     = YES
 #---------------------------------------------------------------------------

doc/Makefile

@@ -1,10 +1,8 @@
 SRCDIR = ../src
+SED:=$(shell command -v gsed || which sed)
 
 all: doxygen
 
-clean:
-	rm -fr me.nlohmann.json.docset html
-
 
 ##########################################################################
 # example files
@@ -44,6 +42,10 @@ create_links: $(EXAMPLES:.cpp=.link)
 check_output: $(EXAMPLES:.cpp=.test)
 
 
+clean:
+	rm -fr me.nlohmann.json.docset html $(EXAMPLES:.cpp=)
+
+
 ##########################################################################
 # Doxygen HTML documentation
 ##########################################################################
@@ -51,8 +53,11 @@ check_output: $(EXAMPLES:.cpp=.test)
 # create Doxygen documentation
 doxygen: create_output create_links
 	doxygen
-	gsed -i 's@< ObjectType, ArrayType, StringType, BooleanType, NumberIntegerType, NumberFloatType, AllocatorType >@@g' html/*.html
-	gsed -i 's@< ObjectType, ArrayType, StringType, BooleanType, NumberIntegerType, NumberFloatType, AllocatorType >@@g' html/*.html
+	$(SED) -i 's@< ObjectType, ArrayType, StringType, BooleanType, NumberIntegerType, NumberFloatType, AllocatorType >@@g' html/*.html
+	$(SED) -i 's@< ObjectType, ArrayType, StringType, BooleanType, NumberIntegerType, NumberFloatType, AllocatorType >@@g' html/*.html
+	$(SED) -i 's@< ObjectType, ArrayType, StringType, BooleanType, NumberIntegerType, NumberUnsignedType, NumberFloatType, AllocatorType >@@g' html/*.html
+	$(SED) -i 's@< ObjectType, ArrayType, StringType, BooleanType, NumberIntegerType, NumberUnsignedType, NumberFloatType, AllocatorType >@@g' html/*.html
+	$(SED) -i 's@&lt;&#160;ObjectType,&#160;ArrayType,&#160;StringType,&#160;BooleanType,&#160;NumberIntegerType,&#160;NumberUnsignedType,&#160;NumberFloatType,&#160;AllocatorType&#160;&gt;@@g' html/*.html
 
 upload: clean doxygen check_output
 	cd html ; ../scripts/git-update-ghpages nlohmann/json
@@ -67,14 +72,14 @@ upload: clean doxygen check_output
 # create docset for Dash
 docset: create_output
 	cp Doxyfile Doxyfile_docset
-	gsed -i 's/DISABLE_INDEX          = NO/DISABLE_INDEX          = YES/' Doxyfile_docset
-	gsed -i 's/SEARCHENGINE           = YES/SEARCHENGINE           = NO/' Doxyfile_docset
-	gsed -i 's@HTML_EXTRA_STYLESHEET  = css/mylayout.css@HTML_EXTRA_STYLESHEET  = css/mylayout_docset.css@' Doxyfile_docset
+	$(SED) -i 's/DISABLE_INDEX          = NO/DISABLE_INDEX          = YES/' Doxyfile_docset
+	$(SED) -i 's/SEARCHENGINE           = YES/SEARCHENGINE           = NO/' Doxyfile_docset
+	$(SED) -i 's@HTML_EXTRA_STYLESHEET  = css/mylayout.css@HTML_EXTRA_STYLESHEET  = css/mylayout_docset.css@' Doxyfile_docset
 	rm -fr html *.docset
 	doxygen Doxyfile_docset
-	gsed -i 's@&lt; ObjectType, ArrayType, StringType, BooleanType, NumberIntegerType, NumberFloatType, AllocatorType &gt;@@g' html/*.html
-	gsed -i 's@&lt;&#160;ObjectType,&#160;ArrayType,&#160;StringType,&#160;BooleanType,&#160;NumberIntegerType,&#160;NumberFloatType,&#160;AllocatorType&#160;&gt;@@g' html/*.html
+	$(SED) -i 's@&lt; ObjectType, ArrayType, StringType, BooleanType, NumberIntegerType, NumberFloatType, AllocatorType &gt;@@g' html/*.html
+	$(SED) -i 's@&lt;&#160;ObjectType,&#160;ArrayType,&#160;StringType,&#160;BooleanType,&#160;NumberIntegerType,&#160;NumberFloatType,&#160;AllocatorType&#160;&gt;@@g' html/*.html
 	make -C html
 	mv html/*.docset .
-	gsed -i 's@<string>doxygen</string>@<string>json</string>@' me.nlohmann.json.docset/Contents/Info.plist
+	$(SED) -i 's@<string>doxygen</string>@<string>json</string>@' me.nlohmann.json.docset/Contents/Info.plist
 	rm -fr Doxyfile_docset html

doc/css/mylayout.css

@@ -12,3 +12,15 @@ pre.fragment {
     white-space: -o-pre-wrap;    /* Opera 7 */
     word-wrap: break-word;       /* Internet Explorer 5.5+ */
 }
+
+td.paramname {
+    vertical-align: top;
+}
+
+.ok_green {
+    background-color: #89C35C;
+}
+
+.nok_throws {
+    background-color: #ffa500;
+}

doc/css/mylayout_docset.css

@@ -13,3 +13,15 @@
 #top, .footer {
     display: none;
 }
+
+td.paramname {
+    vertical-align: top;
+}
+
+.ok_green {
+    background-color: #89C35C;
+}
+
+.nok_throws {
+    background-color: #ffa500;
+}

doc/examples/README.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/README.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/WSW3gHHE4UcZ9K3G"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/IoZNMHqubixQx2dN"><b>online</b></a>

doc/examples/array.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/array.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/NeN8wmHsQGxFXC6L"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/1fsm4gI55p83DOwU"><b>online</b></a>

doc/examples/at__object_t_key_type.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/at__object_t_key_type.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/3ir8W1OZ5KtbRz6r"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/rsnwWxpDjmtRRSzb"><b>online</b></a>

doc/examples/at__object_t_key_type_const.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/at__object_t_key_type_const.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/zwOKkXrKstDlMPjr"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/aeoZrnhnb3HKClCY"><b>online</b></a>

doc/examples/at__size_type.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/at__size_type.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/9Ae4DO4HJjULnq5j"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/R7z2SB2rMdFQ9XtR"><b>online</b></a>

doc/examples/at__size_type_const.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/at__size_type_const.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/Ti47m4DY2lV4SWNV"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/L1bMeiN6nYm7JrvA"><b>online</b></a>

doc/examples/at_json_pointer.cpp

@@ -0,0 +1,35 @@
+#include <json.hpp>
+
+using json = nlohmann::json;
+
+int main()
+{
+    // create a JSON value
+    json j =
+    {
+        {"number", 1}, {"string", "foo"}, {"array", {1, 2}}
+    };
+
+    // read-only access
+
+    // output element with JSON pointer "/number"
+    std::cout << j.at("/number"_json_pointer) << '\n';
+    // output element with JSON pointer "/string"
+    std::cout << j.at("/string"_json_pointer) << '\n';
+    // output element with JSON pointer "/array"
+    std::cout << j.at("/array"_json_pointer) << '\n';
+    // output element with JSON pointer "/array/1"
+    std::cout << j.at("/array/1"_json_pointer) << '\n';
+
+    // writing access
+
+    // change the string
+    j.at("/string"_json_pointer) = "bar";
+    // output the changed string
+    std::cout << j["string"] << '\n';
+
+    // change an array element
+    j.at("/array/1"_json_pointer) = 21;
+    // output the changed array
+    std::cout << j["array"] << '\n';
+}

doc/examples/at_json_pointer.link

@@ -0,0 +1 @@
+<a target="_blank" href="http://melpon.org/wandbox/permlink/NDSjglHZIjIZ0Uxg"><b>online</b></a>

doc/examples/at_json_pointer.output

@@ -0,0 +1,6 @@
+1
+"foo"
+[1,2]
+2
+"bar"
+[1,21]

doc/examples/at_json_pointer_const.cpp

@@ -0,0 +1,23 @@
+#include <json.hpp>
+
+using json = nlohmann::json;
+
+int main()
+{
+    // create a JSON value
+    json j =
+    {
+        {"number", 1}, {"string", "foo"}, {"array", {1, 2}}
+    };
+
+    // read-only access
+
+    // output element with JSON pointer "/number"
+    std::cout << j.at("/number"_json_pointer) << '\n';
+    // output element with JSON pointer "/string"
+    std::cout << j.at("/string"_json_pointer) << '\n';
+    // output element with JSON pointer "/array"
+    std::cout << j.at("/array"_json_pointer) << '\n';
+    // output element with JSON pointer "/array/1"
+    std::cout << j.at("/array/1"_json_pointer) << '\n';
+}

doc/examples/at_json_pointer_const.link

@@ -0,0 +1 @@
+<a target="_blank" href="http://melpon.org/wandbox/permlink/OuLYiMJ3pgyOHupb"><b>online</b></a>

doc/examples/at_json_pointer_const.output

@@ -0,0 +1,4 @@
+1
+"foo"
+[1,2]
+2

doc/examples/back.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {
@@ -21,8 +21,8 @@ int main()
     std::cout << j_number_integer.back() << '\n';
     std::cout << j_number_float.back() << '\n';
     std::cout << j_object.back() << '\n';
-    //std::cout << j_object_empty.back() << '\n';  // would throw
+    //std::cout << j_object_empty.back() << '\n';  // undefined behavior
     std::cout << j_array.back() << '\n';
-    //std::cout << j_array_empty.back() << '\n';   // would throw
+    //std::cout << j_array_empty.back() << '\n';   // undefined behavior
     std::cout << j_string.back() << '\n';
 }

doc/examples/back.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/zB9tSkSVYIthfgj6"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/nPVnBcHf8nrNpGOJ"><b>online</b></a>

doc/examples/basic_json.cpp

@@ -1,12 +0,0 @@
-#include <json.hpp>
-
-using namespace nlohmann;
-
-int main()
-{
-    // create a JSON value with default null value
-    json j;
-
-    // serialize the JSON null value
-    std::cout << j << '\n';
-}

doc/examples/basic_json.link

@@ -1 +0,0 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/Hrajl95QUa1Lplou"><b>online</b></a>

doc/examples/basic_json.output

@@ -1 +0,0 @@
-null

doc/examples/basic_json__CompatibleArrayType.cpp

@@ -5,7 +5,7 @@
 #include <set>
 #include <unordered_set>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {
@@ -39,7 +39,7 @@ int main()
 
     // create an array from std::multiset
     std::multiset<std::string> c_mset {"one", "two", "one", "four"};
-    json j_mset(c_mset); // only one entry for "one" is used
+    json j_mset(c_mset); // both entries for "one" are used
 
     // create an array from std::unordered_multiset
     std::unordered_multiset<std::string> c_umset {"one", "two", "one", "four"};

doc/examples/basic_json__CompatibleArrayType.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/vyrjruntW4ASDBKH"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/3BIhBw91FUVuHE1D"><b>online</b></a>

doc/examples/basic_json__CompatibleIntegerNumberType.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/basic_json__CompatibleIntegerNumberType.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/cyithYO7sPbXxK16"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/PcMzhcu2RpD7KSwr"><b>online</b></a>

doc/examples/basic_json__CompatibleNumberFloatType.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/basic_json__CompatibleNumberFloatType.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/yO6SWuP9bEYvNEvX"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/2TCYWSrOxnR05AZI"><b>online</b></a>

doc/examples/basic_json__CompatibleObjectType.cpp

@@ -1,7 +1,7 @@
 #include <json.hpp>
 #include <unordered_map>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/basic_json__CompatibleObjectType.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/FCiYtNwovQ84DWxl"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/JzLCMcSXNsh4uVWa"><b>online</b></a>

doc/examples/basic_json__CompatibleStringType.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/basic_json__CompatibleStringType.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/h8c1hfORMnVrJ1Ky"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/b9hbCY8zfOiTOuoK"><b>online</b></a>

doc/examples/basic_json__InputIt_InputIt.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/basic_json__InputIt_InputIt.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/z2P1DpA8uSSlwgTl"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/nKF1QcieoCHm6Lez"><b>online</b></a>

doc/examples/basic_json__array_t.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/basic_json__array_t.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/vwVgsv7w6YZUgctJ"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/dTbSNAvl6TqrMEAn"><b>online</b></a>

doc/examples/basic_json__basic_json.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/basic_json__basic_json.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/wwzBU7cK8Xr2yiKJ"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/6Qfn12BDzb3vqO5p"><b>online</b></a>

doc/examples/basic_json__boolean_t.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/basic_json__boolean_t.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/RzWnqhbfuvbHXCBJ"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/VmVl9pyrQp8LyOnU"><b>online</b></a>

doc/examples/basic_json__const_int.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/basic_json__const_int.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/BPk4vUc4kJPWX0rz"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/3xQ1qy7BT9OrSSCo"><b>online</b></a>

doc/examples/basic_json__copyassignment.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/basic_json__copyassignment.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/P8QWpucrWhov8JRR"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/iWYvmlA4qQmtvACX"><b>online</b></a>

doc/examples/basic_json__istream.cpp

@@ -0,0 +1,57 @@
+#include <json.hpp>
+
+using json = nlohmann::json;
+
+int main()
+{
+    // a JSON text
+    auto text = R"(
+    {
+        "Image": {
+            "Width":  800,
+            "Height": 600,
+            "Title":  "View from 15th Floor",
+            "Thumbnail": {
+                "Url":    "http://www.example.com/image/481989943",
+                "Height": 125,
+                "Width":  100
+            },
+            "Animated" : false,
+            "IDs": [116, 943, 234, 38793]
+        }
+    }
+    )";
+
+    // fill a stream with JSON text
+    std::stringstream ss;
+    ss << text;
+
+    // create JSON from stream
+    json j_complete(ss); // deprecated!
+    // shall be replaced by: json j_complete = json::parse(ss);
+    std::cout << std::setw(4) << j_complete << "\n\n";
+
+
+    // define parser callback
+    json::parser_callback_t cb = [](int depth, json::parse_event_t event, json & parsed)
+    {
+        // skip object elements with key "Thumbnail"
+        if (event == json::parse_event_t::key and parsed == json("Thumbnail"))
+        {
+            return false;
+        }
+        else
+        {
+            return true;
+        }
+    };
+
+    // fill a stream with JSON text
+    ss.clear();
+    ss << text;
+
+    // create JSON from stream (with callback)
+    json j_filtered(ss, cb);
+    // shall be replaced by: json j_filtered = json::parse(ss, cb);
+    std::cout << std::setw(4) << j_filtered << '\n';
+}

doc/examples/basic_json__istream.link

@@ -0,0 +1 @@
+<a target="_blank" href="http://melpon.org/wandbox/permlink/R6dzpKXlxrttShf7"><b>online</b></a>

doc/examples/basic_json__istream.output

@@ -0,0 +1,34 @@
+{
+    "Image": {
+        "Animated": false,
+        "Height": 600,
+        "IDs": [
+            116,
+            943,
+            234,
+            38793
+        ],
+        "Thumbnail": {
+            "Height": 125,
+            "Url": "http://www.example.com/image/481989943",
+            "Width": 100
+        },
+        "Title": "View from 15th Floor",
+        "Width": 800
+    }
+}
+
+{
+    "Image": {
+        "Animated": false,
+        "Height": 600,
+        "IDs": [
+            116,
+            943,
+            234,
+            38793
+        ],
+        "Title": "View from 15th Floor",
+        "Width": 800
+    }
+}

doc/examples/basic_json__list_init_t.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/basic_json__list_init_t.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/IWIZSNthuHrT3AS6"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/iZzzxEpB7tbhz0cx"><b>online</b></a>

doc/examples/basic_json__moveconstructor.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/basic_json__moveconstructor.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/dvTtz7DIo8TDhYE6"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/CaDlatv1uXhQiu7o"><b>online</b></a>

doc/examples/basic_json__nullptr_t.cpp

@@ -1,12 +1,15 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {
-    // create a JSON null value
-    json j(nullptr);
+    // implicitly create a JSON null value
+    json j1;
+
+    // explicitly create a JSON null value
+    json j2(nullptr);
 
     // serialize the JSON null value
-    std::cout << j << '\n';
+    std::cout << j1 << '\n' << j2 << '\n';
 }

doc/examples/basic_json__nullptr_t.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/hcERmrPzjmXeSzB8"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/9Tvfs2dJBW8m8ihA"><b>online</b></a>

doc/examples/basic_json__nullptr_t.output

@@ -1 +1,2 @@
 null
+null

doc/examples/basic_json__number_float_t.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/basic_json__number_float_t.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/47cqX7AduSWn24lA"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/OTgOxjIAKFvxpFdm"><b>online</b></a>

doc/examples/basic_json__number_integer_t.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/basic_json__number_integer_t.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/RUSNdk5YEAr2vL4E"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/cCQRCvjXdRM9YpT5"><b>online</b></a>

doc/examples/basic_json__object_t.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/basic_json__object_t.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/4IF0ofRq0nZcV8pI"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/DgtHcz5L6JphTOGJ"><b>online</b></a>

doc/examples/basic_json__size_type_basic_json.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/basic_json__size_type_basic_json.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/dkznQmTMqulurCqD"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/IFZT4VL0oRotJBxl"><b>online</b></a>

doc/examples/basic_json__string_t.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/basic_json__string_t.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/S9jwK28ThNIGkdUI"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/cwNYP1q2mT8CFLTk"><b>online</b></a>

doc/examples/basic_json__string_t_value_type.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/basic_json__string_t_value_type.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/xNtouqvB2OJBOwkv"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/AtV4zVErfLwkileg"><b>online</b></a>

doc/examples/basic_json__value.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/basic_json__value.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/pehnjdIduvv90qfX"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/qdV5W2Lrljmjv4LG"><b>online</b></a>

doc/examples/basic_json__value_ptr.cpp

@@ -0,0 +1,29 @@
+#include <json.hpp>
+
+using json = nlohmann::json;
+
+int main()
+{
+    // create a JSON object with different entry types
+    json j =
+    {
+        {"integer", 1},
+        {"floating", 42.23},
+        {"string", "hello world"},
+        {"boolean", true},
+        {"object", {{"key1", 1}, {"key2", 2}}},
+        {"array", {1, 2, 3}}
+    };
+
+    // access existing values
+    int v_integer = j.value("/integer"_json_pointer, 0);
+    double v_floating = j.value("/floating"_json_pointer, 47.11);
+
+    // access nonexisting values and rely on default value
+    std::string v_string = j.value("/nonexisting"_json_pointer, "oops");
+    bool v_boolean = j.value("/nonexisting"_json_pointer, false);
+
+    // output values
+    std::cout << std::boolalpha << v_integer << " " << v_floating
+              << " " << v_string << " " << v_boolean << "\n";
+}

doc/examples/basic_json__value_ptr.link

@@ -0,0 +1 @@
+<a target="_blank" href="http://melpon.org/wandbox/permlink/K4L4D6nibuGXbjfd"><b>online</b></a>

doc/examples/basic_json__value_ptr.output

@@ -0,0 +1 @@
+1 42.23 oops false

doc/examples/basic_json__value_t.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/basic_json__value_t.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/ncOG8fdxNrISUNFj"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/RMpEI2o935KgD2o2"><b>online</b></a>

doc/examples/begin.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/begin.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/Nwb94PEGlvnjrqj1"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/0lW1WJ1ZP8g92Jp9"><b>online</b></a>

doc/examples/cbegin.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/cbegin.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/mWrMi5IrJjRILgir"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/yarD6DyxYlIf8Ymg"><b>online</b></a>

doc/examples/cend.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {

doc/examples/cend.link

@@ -1 +1 @@
-<a target="_blank" href="http://melpon.org/wandbox/permlink/0OHrFwFGvRuDKdfx"><b>online</b></a>
+<a target="_blank" href="http://melpon.org/wandbox/permlink/9oPbpnFNgKtKjB0O"><b>online</b></a>

doc/examples/clear.cpp

@@ -1,6 +1,6 @@
 #include <json.hpp>
 
-using namespace nlohmann;
+using json = nlohmann::json;
 
 int main()
 {