Extend memcpy fast path to sized sentinels (e.g. std::counted_iterator)

Extend the memcpy fast path in iterator_input_adapter to sized sentinels of a different type, not just same-type iterator pairs. std::counted_iterator paired with std::default_sentinel_t already satisfies std::contiguous_iterator and std::sized_sentinel_for, so std::ranges::distance (C++20) lets that combination reach the fast path too, instead of silently falling back to the byte-by-byte path. - iterator_is_contiguous now also allows std::sized_sentinel_for<SentinelType, IteratorType> under C++20, gated the same way as the existing std::contiguous_iterator detection. - get_elements_impl's fast path uses std::ranges::distance under C++20 (works for both same-type and sized-sentinel pairs) and falls back to std::distance pre-C++20, where SentinelType is always IteratorType. - Add a C++20-only test exercising json::parse/accept with std::counted_iterator + std::default_sentinel_t. - Document std::default_sentinel_t + std::counted_iterator as a SentinelType example across parse.md, accept.md, sax_parse.md, and the five from_*.md pages, replacing an earlier ambiguously worded bullet. Addresses review feedback: https://github.com/nlohmann/json/pull/5265#discussion_r3564237584 Signed-off-by: Niels Lohmann <mail@nlohmann.me>
Fix clang-tidy misc-const-correctness in heterogeneous sentinel test
2026-09-29 19:20:30 +00:00 · 2026-07-11 16:26:09 +02:00 · 2026-07-11 10:06:11 +02:00 · 2026-07-11 00:10:23 +02:00 · 2026-07-10 23:25:21 +02:00 · 2026-07-10 23:15:17 +02:00
493 changed files with 6393 additions and 59145 deletions
@@ -108,9 +108,7 @@ The tests are located in [`tests/src/unit-*.cpp`](https://github.com/nlohmann/js
 are structured along the features of the library or the nature of the tests. Usually, it should be clear from the
 context which existing file needs to be extended, and only very few cases require creating new test files.

-When fixing a bug, edit `unit-regression3.cpp` and add a section referencing the fixed issue.
-`unit-regression2.cpp` holds the older tests; the two files exist because a single one grew large enough for the
-MinGW linker to fail relocating it, so please keep adding to the smaller file rather than growing the larger one.
+When fixing a bug, edit `unit-regression2.cpp` and add a section referencing the fixed issue.

 #### Exceptions

@@ -158,15 +156,6 @@ make amalgamate
 Running `make amalgamate` will also apply automatic formatting to the source files using
 [`Artistic Style`](https://astyle.sourceforge.net/). This formatting may modify your source files in-place. Be certain to review and commit any changes to avoid unintended formatting diffs in commits.

-If you add, rename, or remove a header in `include/nlohmann`, also regenerate the header list in
-[`BUILD.bazel`](https://github.com/nlohmann/json/blob/develop/BUILD.bazel) (requires CMake) by executing:
-
-```shell
-make BUILD.bazel
-```
-
-The amalgamation check in CI fails if any of these generated files is out of date.
-
 ## Recommended documentation

 - The library’s [README file](https://github.com/nlohmann/json/blob/master/README.md) is an excellent starting point to
@@ -2,7 +2,6 @@

 - [ ] The changes are described in detail, both the what and why.
 - [ ] If applicable, an [existing issue](https://github.com/nlohmann/json/issues) is referenced.
- [ ] If applicable, a fixed [OSS-Fuzz](https://issues.oss-fuzz.com) issue is referenced as `OSS-Fuzz: <id>` (see [fuzz testing](https://github.com/nlohmann/json/blob/develop/tests/fuzzing.md#handling-oss-fuzz-reports)).
 - [ ] The [Code coverage](https://coveralls.io/github/nlohmann/json) remained at 100%. A test case for every new line of code.
 - [ ] If applicable, the [documentation](https://json.nlohmann.me) is updated.
 - [ ] The source code is amalgamated by running `make amalgamate`.
@@ -9,31 +9,12 @@ identified a security vulnerability in this repository, please use the GitHub Se
 Until it is published, this draft security advisory will only be visible to the maintainers of this project. Other
 users and teams may be added once the advisory is created.

-We will send a first response within 14 days, indicating the next steps in handling your report. After the initial
-reply to your report, we will keep you informed of the progress towards a fix and full announcement and may ask for
-additional information or guidance.
+We will send a response indicating the next steps in handling your report. After the initial reply to your report, we
+will keep you informed of the progress towards a fix and full announcement and may ask for additional information or
+guidance.

 For vulnerabilities in third-party dependencies or modules, please report them directly to the respective maintainers.

-## Disclosure and credit
-
-Once a fix is released, we publish the security advisory and list the fixed vulnerability in the release notes. We
-credit the reporter in both, unless they ask not to be named.
-
-## Supported versions
-
-Security fixes are made on the `develop` branch and shipped with the next release. Only the latest release receives
-security fixes; they are not backported to older releases. A release stops receiving security fixes when the next
-release is published, so please update to the latest release to get them.
-
-## Unofficial packages
-
-This project does not publish an official npm package. The npm package
-[`nlohmann-json`](https://www.npmjs.com/package/nlohmann-json) (or similarly named packages) is not maintained or
-endorsed by this project. See the
-[package managers documentation](https://json.nlohmann.me/integration/package_managers/#npm) for supported
-integration options.
-
 ## Additional Resources

 - Explore security-related topics and contribute to tools and projects through
@@ -29,45 +29,6 @@ labels:
  files:
    - ".github/external_ci/.*"

- label: "CI"
-  files:
-    - ".github/(dependabot|labeler)\\.yml"
-
- label: "aspect: binary formats"
-  files:
-    - "include/nlohmann/detail/input/binary_reader\\.hpp"
-    - "include/nlohmann/detail/output/binary_writer\\.hpp"
-    - "tests/src/unit-(bson|cbor|msgpack|ubjson|bjdata|bon8|binary_formats)"
-    - "tests/src/fuzzer-parse_(bson|cbor|msgpack|ubjson|bjdata|bon8)"
-    - "docs/mkdocs/docs/features/binary_formats/"
-    - "docs/mkdocs/docs/(api/basic_json|examples)/(to|from)_(bson|cbor|msgpack|ubjson|bjdata|bon8)"
-
- label: "aspect: binary formats"
-  title: "(?i)(bson|cbor|msgpack|messagepack|ubjson|bjdata|bon8|binary format)"
-
- label: "aspect: json_view"
-  files:
-    - "include/nlohmann/json_view\\.hpp"
-    - "include/nlohmann/detail/view/.*"
-    - "single_include/nlohmann/json_view\\.hpp"
-    - "tests/src/unit-json_view.*"
-    - "tests/src/fuzzer-parse_json_view\\.cpp"
-    - "tests/benchmarks/json_view/.*"
-    - "tools/amalgamate/config_json_view\\.json"
-    - "docs/mkdocs/docs/features/json_view\\.md"
-    - "docs/mkdocs/docs/api/basic_json_(document|view)/.*"
-    - "docs/mkdocs/docs/api/(ordered_)?json_(document|view)\\.md"
-    - "docs/mkdocs/docs/examples/(basic_json_(document|view)__|(ordered_)?json_(document|view)).*"
-    - "tests/benchmarks/src/benchmarks_view\\.cpp"
-
- label: "aspect: json_view"
-  title: "(?i)(json_view|json_document|zero-copy)"
-
- label: "python"
-  files:
-    - "\\.py$"
-    - "requirements[^/]*\\.txt$"
-
 - label: "S"
  size-below: 10
 - label: "M"
@@ -3,10 +3,6 @@ name: "Check amalgamation"
 on:
  pull_request:

-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref || github.run_id }}
-  cancel-in-progress: true
-
 permissions:
  contents: read

@@ -15,7 +11,7 @@ jobs:
    runs-on: ubuntu-latest
    steps:
      - name: Harden Runner
-        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
+        uses: step-security/harden-runner@bf7454d06d71f1098171f2acdf0cd4708d7b5920 # v2.20.0
        with:
          egress-policy: audit

@@ -38,19 +34,19 @@ jobs:

    steps:
      - name: Harden Runner
-        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
+        uses: step-security/harden-runner@bf7454d06d71f1098171f2acdf0cd4708d7b5920 # v2.20.0
        with:
          egress-policy: audit

      - name: Checkout pull request
-        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          path: main
          ref: ${{ github.event.pull_request.head.sha }}
          persist-credentials: false

      - name: Checkout tools
-        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          path: tools
          ref: develop
@@ -61,32 +57,18 @@ jobs:
          python3 -mvenv venv
          venv/bin/pip3 install -r $MAIN_DIR/tools/astyle/requirements.txt

-      - name: Regenerate amalgamation, formatting, and BUILD.bazel
+      - name: Regenerate amalgamation and formatting
        run: |
          cd $MAIN_DIR

          python3 $TOOL_DIR/amalgamate.py -c $TOOL_DIR/config_json.json -s .
          python3 $TOOL_DIR/amalgamate.py -c $TOOL_DIR/config_json_fwd.json -s .
-          python3 $TOOL_DIR/amalgamate.py -c $TOOL_DIR/config_json_view.json -s .
-
-          # the header list of the Bazel "json" target must match the files in include/
-          cmake -P cmake/scripts/gen_bazel_build_file.cmake

          ${{ github.workspace }}/venv/bin/astyle --project=tools/astyle/.astylerc --suffix=none --quiet \
-            $INCLUDE_DIR/json.hpp $INCLUDE_DIR/json_fwd.hpp $INCLUDE_DIR/json_view.hpp
-
-          # fail loudly if a directory is renamed or removed: find would only warn
-          # about the missing path and silently drop its files from the check
-          SOURCE_DIRS="docs/mkdocs/docs/examples include tests"
-          for DIR in $SOURCE_DIRS; do
-            if [ ! -d "$DIR" ]; then
-              echo "::error::source directory '$DIR' does not exist"
-              exit 1
-            fi
-          done
+            $INCLUDE_DIR/json.hpp $INCLUDE_DIR/json_fwd.hpp

          ${{ github.workspace }}/venv/bin/astyle --project=tools/astyle/.astylerc --suffix=none --quiet \
-            $(find $SOURCE_DIRS -type f \( -name '*.hpp' -o -name '*.cpp' -o -name '*.cu' \) -not -path 'tests/thirdparty/*' -not -path 'tests/abi/include/nlohmann/*' | sort)
+            $(find docs/examples include tests -type f \( -name '*.hpp' -o -name '*.cpp' -o -name '*.cu' \) -not -path 'tests/thirdparty/*' -not -path 'tests/abi/include/nlohmann/*' | sort)

      - name: Build patch and check for differences
        id: diff
@@ -95,7 +77,7 @@ jobs:
          mkdir -p ${{ github.workspace }}/patch
          git diff --patch --no-color > ${{ github.workspace }}/patch/amalgamation.patch
          if [ -s ${{ github.workspace }}/patch/amalgamation.patch ]; then
-            echo "The source code has not been amalgamated/formatted correctly or BUILD.bazel is out of date. Diff:"
+            echo "The source code has not been amalgamated/formatted correctly. Diff:"
            cat ${{ github.workspace }}/patch/amalgamation.patch
            echo "has_diff=true" >> "$GITHUB_OUTPUT"
          else
@@ -1,10 +1,6 @@
 name: CIFuzz
 on: [pull_request]

-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref || github.run_id }}
-  cancel-in-progress: true
-
 permissions:
  contents: read

@@ -13,7 +9,7 @@ jobs:
    runs-on: ubuntu-22.04
    steps:
    - name: Harden Runner
-      uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
+      uses: step-security/harden-runner@bf7454d06d71f1098171f2acdf0cd4708d7b5920 # v2.20.0
      with:
        egress-policy: audit

@@ -27,25 +27,25 @@ jobs:

    steps:
    - name: Harden Runner
-      uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
+      uses: step-security/harden-runner@bf7454d06d71f1098171f2acdf0cd4708d7b5920 # v2.20.0
      with:
        egress-policy: audit

    - name: Checkout repository
-      uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
      with:
        persist-credentials: false

    # Initializes the CodeQL tools for scanning.
    - name: Initialize CodeQL
-      uses: github/codeql-action/init@1c5b675653bb5c22dbe9b12b556ec555138e09fd # v4.38.1
+      uses: github/codeql-action/init@54f647b7e1bb85c95cddabcd46b0c578ec92bc1a # v4.36.3
      with:
        languages: c-cpp

    # Autobuild attempts to build any compiled languages  (C/C++, C#, or Java).
    # If this step fails, then you should remove it and run the build manually (see below)
    - name: Autobuild
-      uses: github/codeql-action/autobuild@1c5b675653bb5c22dbe9b12b556ec555138e09fd # v4.38.1
+      uses: github/codeql-action/autobuild@54f647b7e1bb85c95cddabcd46b0c578ec92bc1a # v4.36.3

    - name: Perform CodeQL Analysis
-      uses: github/codeql-action/analyze@1c5b675653bb5c22dbe9b12b556ec555138e09fd # v4.38.1
+      uses: github/codeql-action/analyze@54f647b7e1bb85c95cddabcd46b0c578ec92bc1a # v4.36.3
@@ -19,7 +19,7 @@ jobs:
      pull-requests: write
    steps:
      - name: Harden Runner
-        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
+        uses: step-security/harden-runner@bf7454d06d71f1098171f2acdf0cd4708d7b5920 # v2.20.0
        with:
          egress-policy: audit

@@ -95,13 +95,13 @@ jobs:
              issue_number: issue_number,
              owner: context.repo.owner,
              repo: context.repo.repo,
-              body: '## 🔴 Amalgamation check failed! 🔴\nThe source code has not been amalgamated and/or formatted correctly, or `BUILD.bazel` is out of date.'
+              body: '## 🔴 Amalgamation check failed! 🔴\nThe source code has not been amalgamated and/or formatted correctly.'
                    + (hasPatch ? '\n\n📎 A ready-to-apply patch is attached to the [failed workflow run](' + runUrl + ') as the `amalgamation-patch` artifact.'
                                  + ' Download it, then apply it locally from the repository root with:'
                                  + '\n\n```shell\ngit apply amalgamation.patch\n```\n\n'
                                  + 'This does not require installing astyle yourself.'
                                : '')
                    + (first ? '\n\n@' + author + ' Please read and follow the [Contribution Guidelines]'
-                               + '(https://github.com/nlohmann/json/blob/develop/.github/CONTRIBUTING.md#amalgamate-the-source-code).'
+                               + '(https://github.com/nlohmann/json/blob/develop/.github/CONTRIBUTING.md#files-to-change).'
                             : '')
              })
@@ -9,10 +9,6 @@
 name: 'Dependency Review'
 on: [pull_request]

-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref || github.run_id }}
-  cancel-in-progress: true
-
 permissions:
  contents: read

@@ -21,12 +17,12 @@ jobs:
    runs-on: ubuntu-latest
    steps:
      - name: Harden Runner
-        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
+        uses: step-security/harden-runner@bf7454d06d71f1098171f2acdf0cd4708d7b5920 # v2.20.0
        with:
          egress-policy: audit

      - name: 'Checkout Repository'
-        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      - name: 'Dependency Review'
@@ -5,10 +5,6 @@

 name: flawfinder

-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref || github.run_id }}
-  cancel-in-progress: true
-
 permissions:
  contents: read

@@ -31,12 +27,12 @@ jobs:
      security-events: write
    steps:
      - name: Harden Runner
-        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
+        uses: step-security/harden-runner@bf7454d06d71f1098171f2acdf0cd4708d7b5920 # v2.20.0
        with:
          egress-policy: audit

      - name: Checkout code
-        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false

@@ -47,6 +43,6 @@ jobs:
          output: 'flawfinder_results.sarif'

      - name: Upload analysis results to GitHub Security tab
-        uses: github/codeql-action/upload-sarif@1c5b675653bb5c22dbe9b12b556ec555138e09fd # v4.38.1
+        uses: github/codeql-action/upload-sarif@54f647b7e1bb85c95cddabcd46b0c578ec92bc1a # v4.36.3
        with:
          sarif_file: ${{github.workspace}}/flawfinder_results.sarif
@@ -1,78 +0,0 @@
-name: "json_view benchmarks"
-
-# On demand only: runs the comparison of json_view with yyjson, simdjson, and
-# Boost.JSON (tests/benchmarks/json_view/compare.py) on GitHub-hosted runners,
-# for numbers from x86-64 and AArch64 Linux. It runs when started by hand, or
-# when a pull request gets the label "benchmark" (on both architectures, with
-# GCC and the default settings). Shared runners are noisy: the results show
-# where json_view stands, but published numbers need a quiet machine (see
-# tests/benchmarks/json_view/README.md).
-
-on:
-  pull_request:
-    types: [labeled]
-  workflow_dispatch:
-    inputs:
-      runner:
-        description: "Runner image"
-        type: choice
-        options:
-          - ubuntu-24.04
-          - ubuntu-24.04-arm
-        default: ubuntu-24.04
-      compiler:
-        description: "Compiler"
-        type: choice
-        options:
-          - g++
-          - clang++
-        default: g++
-      native:
-        description: "Compile for the runner's CPU (-march=native)"
-        type: boolean
-        default: false
-      rounds:
-        description: "Rounds of bench_view"
-        type: number
-        default: 30
-
-permissions:
-  contents: read
-
-jobs:
-  compare:
-    if: github.event_name == 'workflow_dispatch' || github.event.label.name == 'benchmark'
-    strategy:
-      matrix:
-        runner: ${{ fromJSON(github.event_name == 'workflow_dispatch' && format('["{0}"]', inputs.runner) || '["ubuntu-24.04", "ubuntu-24.04-arm"]') }}
-    runs-on: ${{ matrix.runner }}
-    steps:
-      - name: Harden Runner
-        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
-        with:
-          egress-policy: audit
-
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
-        with:
-          persist-credentials: false
-
-      - name: Download test data
-        run: |
-          cmake -S . -B build -DJSON_BuildTests=On
-          cmake --build build --target download_test_data
-
-      - name: Run the comparison
-        env:
-          CXX: ${{ inputs.compiler || 'g++' }}
-          CC: ${{ inputs.compiler == 'clang++' && 'clang' || 'gcc' }}
-          ROUNDS: ${{ inputs.rounds || 30 }}
-          NATIVE: ${{ inputs.native && '--native' || '' }}
-        run: python3 tests/benchmarks/json_view/compare.py --data build/test_files --download --rounds "$ROUNDS" $NATIVE
-
-      - name: Summary
-        run: cat tests/benchmarks/json_view/results/*.md >> "$GITHUB_STEP_SUMMARY"
-
-      - uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
-        with:
-          name: json_view-benchmarks-${{ matrix.runner }}-${{ inputs.compiler || 'g++' }}
-          path: tests/benchmarks/json_view/results/
@@ -4,12 +4,6 @@ on:
  pull_request_target:
    types: [opened, synchronize]

-# pull_request_target runs on the base branch, so github.ref would put all pull
-# requests into one group; group by pull request number instead
-concurrency:
-  group: ${{ github.workflow }}-${{ github.event.pull_request.number || github.run_id }}
-  cancel-in-progress: true
-
 permissions:
  contents: read

@@ -23,7 +17,7 @@ jobs:

    steps:
      - name: Harden Runner
-        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
+        uses: step-security/harden-runner@bf7454d06d71f1098171f2acdf0cd4708d7b5920 # v2.20.0
        with:
          egress-policy: audit

@@ -26,7 +26,7 @@ jobs:
      DEVELOPER_DIR: /Applications/Xcode_${{ matrix.xcode }}.app/Contents/Developer

    steps:
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      - name: Run CMake
@@ -45,7 +45,7 @@ jobs:
      DEVELOPER_DIR: /Applications/Xcode_${{ matrix.xcode }}.app/Contents/Developer

    steps:
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      - name: Run CMake
@@ -62,7 +62,7 @@ jobs:
        standard: [11, 14, 17, 20, 23, 26]

    steps:
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      - name: Run CMake
@@ -7,6 +7,7 @@ on:
      - develop
    paths:
      - docs/mkdocs/**
+      - docs/examples/**
  workflow_dispatch:

 # we don't want to have concurrent jobs, and we don't want to cancel running jobs to avoid broken publications
@@ -26,11 +27,11 @@ jobs:
    runs-on: ubuntu-22.04
    steps:
      - name: Harden Runner
-        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
+        uses: step-security/harden-runner@bf7454d06d71f1098171f2acdf0cd4708d7b5920 # v2.20.0
        with:
          egress-policy: audit

-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0

      - name: Install virtual environment
        run: make install_venv -C docs/mkdocs
@@ -14,10 +14,6 @@ on:
  push:
    branches: ["develop"]

-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref || github.run_id }}
-  cancel-in-progress: true
-
 permissions:
  contents: read

@@ -40,17 +36,17 @@ jobs:

    steps:
      - name: Harden Runner
-        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
+        uses: step-security/harden-runner@bf7454d06d71f1098171f2acdf0cd4708d7b5920 # v2.20.0
        with:
          egress-policy: audit

      - name: "Checkout code"
-        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false

      - name: "Run analysis"
-        uses: ossf/scorecard-action@2d1146689b8cda280b9bc96326124645441f03bc # v2.4.4
+        uses: ossf/scorecard-action@4eaacf0543bb3f2c246792bd56e8cdeffafb205a # v2.4.3
        with:
          results_file: results.sarif
          results_format: sarif
@@ -80,6 +76,6 @@ jobs:

      # Upload the results to GitHub's code scanning dashboard.
      - name: "Upload to code-scanning"
-        uses: github/codeql-action/upload-sarif@1c5b675653bb5c22dbe9b12b556ec555138e09fd # v4.38.1
+        uses: github/codeql-action/upload-sarif@54f647b7e1bb85c95cddabcd46b0c578ec92bc1a # v4.36.3
        with:
          sarif_file: results.sarif
@@ -19,10 +19,6 @@ on:
  schedule:
    - cron: '23 2 * * 4'

-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref || github.run_id }}
-  cancel-in-progress: true
-
 permissions:
  contents: read

@@ -36,12 +32,12 @@ jobs:
    runs-on: ubuntu-latest
    steps:
      - name: Harden Runner
-        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
+        uses: step-security/harden-runner@bf7454d06d71f1098171f2acdf0cd4708d7b5920 # v2.20.0
        with:
          egress-policy: audit

      # Checkout project source
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false

@@ -65,7 +61,7 @@ jobs:

      # Upload SARIF file generated in previous step
      - name: Upload SARIF file
-        uses: github/codeql-action/upload-sarif@1c5b675653bb5c22dbe9b12b556ec555138e09fd # v4.38.1
+        uses: github/codeql-action/upload-sarif@54f647b7e1bb85c95cddabcd46b0c578ec92bc1a # v4.36.3
        with:
          sarif_file: semgrep.sarif
        if: always()
@@ -16,11 +16,11 @@ jobs:

    steps:
      - name: Harden Runner
-        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
+        uses: step-security/harden-runner@bf7454d06d71f1098171f2acdf0cd4708d7b5920 # v2.20.0
        with:
          egress-policy: audit

-      - uses: actions/stale@4391f3da665fdf50b6810c1a66712fb9ba21aa93 # v11.0.0
+      - uses: actions/stale@eb5cf3af3ac0a1aa4c9c45633dd1ae542a27a899 # v10.3.0
        with:
          stale-issue-label: 'state: stale'
          stale-pr-label: 'state: stale'
@@ -21,11 +21,11 @@ jobs:
    runs-on: ubuntu-latest
    container: gcc:latest
    steps:
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      - name: Get latest CMake and ninja
-        uses: lukka/get-cmake@fffaaafeea488556c2c12dad60690008bc1caacb # v4.4.2
+        uses: lukka/get-cmake@f5b8fbb4d77cec1acc5a5f9f0df4beffaf5d98d9 # v4.3.4
      - name: Run CMake
        run: cmake -S . -B build -DJSON_CI=On
      - name: Build
@@ -35,7 +35,7 @@ jobs:
    runs-on: ubuntu-latest
    steps:
      - name: Harden Runner
-        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
+        uses: step-security/harden-runner@bf7454d06d71f1098171f2acdf0cd4708d7b5920 # v2.20.0
        with:
          egress-policy: audit

@@ -43,11 +43,11 @@ jobs:
        run: |
          wget -q -O - "https://github.com/facebook/infer/releases/download/v1.3.0/infer-linux-x86_64-v1.3.0.tar.xz" | sudo tar -C /opt -xJ
          sudo ln -s /opt/infer-linux-x86_64-v1.3.0/bin/infer /usr/local/bin/infer
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      - name: Get latest CMake and ninja
-        uses: lukka/get-cmake@fffaaafeea488556c2c12dad60690008bc1caacb # v4.4.2
+        uses: lukka/get-cmake@f5b8fbb4d77cec1acc5a5f9f0df4beffaf5d98d9 # v4.3.4
      - name: Run CMake
        run: cmake -S . -B build -DJSON_CI=On
      - name: Build
@@ -60,17 +60,17 @@ jobs:
        target: [ci_test_amalgamation, ci_test_single_header, ci_cppcheck, ci_cpplint, ci_reproducible_tests, ci_non_git_tests, ci_offline_testdata, ci_reuse_compliance, ci_test_valgrind]
    steps:
      - name: Harden Runner
-        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
+        uses: step-security/harden-runner@bf7454d06d71f1098171f2acdf0cd4708d7b5920 # v2.20.0
        with:
          egress-policy: audit

      - name: Install Valgrind
        run: sudo apt-get update ; sudo apt-get install -y valgrind
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      - name: Get latest CMake and ninja
-        uses: lukka/get-cmake@fffaaafeea488556c2c12dad60690008bc1caacb # v4.4.2
+        uses: lukka/get-cmake@f5b8fbb4d77cec1acc5a5f9f0df4beffaf5d98d9 # v4.3.4
      - name: Run CMake
        run: cmake -S . -B build -DJSON_CI=On
      - name: Build
@@ -85,11 +85,11 @@ jobs:
    steps:
      - name: Install git, clang-tools, iwyu (ci_single_binaries), and unzip
        run: apt-get update ; apt-get install -y git clang-tools iwyu unzip
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      - name: Get latest CMake and ninja
-        uses: lukka/get-cmake@fffaaafeea488556c2c12dad60690008bc1caacb # v4.4.2
+        uses: lukka/get-cmake@f5b8fbb4d77cec1acc5a5f9f0df4beffaf5d98d9 # v4.3.4
      - name: Run CMake
        run: cmake -S . -B build -DJSON_CI=On
      - name: Build
@@ -100,15 +100,15 @@ jobs:
    container: ubuntu:focal
    strategy:
      matrix:
-        target: [ci_cmake_flags, ci_test_diagnostics, ci_test_diagnostic_positions, ci_test_noexceptions, ci_test_noimplicitconversions, ci_test_legacycomparison, ci_test_noglobaludls, ci_test_disableenumserialization, ci_test_skiplibraryversioncheck, ci_test_simdutf, ci_test_strict_nul_handling, ci_test_no_thread_local]
+        target: [ci_cmake_flags, ci_test_diagnostics, ci_test_diagnostic_positions, ci_test_noexceptions, ci_test_noimplicitconversions, ci_test_legacycomparison, ci_test_noglobaludls]
    steps:
      - name: Install build-essential
        run: apt-get update ; apt-get install -y build-essential unzip wget git libssl-dev
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      - name: Get latest CMake and ninja
-        uses: lukka/get-cmake@fffaaafeea488556c2c12dad60690008bc1caacb # v4.4.2
+        uses: lukka/get-cmake@f5b8fbb4d77cec1acc5a5f9f0df4beffaf5d98d9 # v4.3.4
      - name: Run CMake
        run: cmake -S . -B build -DJSON_CI=On
      - name: Build
@@ -118,11 +118,11 @@ jobs:
    runs-on: ubuntu-latest
    steps:
      - name: Harden Runner
-        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
+        uses: step-security/harden-runner@bf7454d06d71f1098171f2acdf0cd4708d7b5920 # v2.20.0
        with:
          egress-policy: audit

-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      - name: Install dependencies and de_DE locale
@@ -142,7 +142,7 @@ jobs:
          name: code-coverage-report
          path: ${{ github.workspace }}/build/html
      - name: Publish report to Coveralls
-        uses: coverallsapp/github-action@8d6379e14d29928660c4ba802d8e85393440b329 # v2.3.8
+        uses: coverallsapp/github-action@5cbfd81b66ca5d10c19b062c04de0199c215fb6e # v2.3.7
        with:
          github-token: ${{ secrets.GITHUB_TOKEN }}
          path-to-lcov: ${{ github.workspace }}/build/json.info.filtered.noexcept
@@ -163,15 +163,7 @@ jobs:
          export DEBIAN_FRONTEND=noninteractive
          apt-get update
          apt-get install -y --no-install-recommends software-properties-common ca-certificates gnupg make git
-          # add-apt-repository resolves the PPA through the Launchpad API,
-          # which intermittently times out or fails the team lookup (the plain
-          # "deb ..." sources below never hit Launchpad and never flake).
-          # Retry with backoff so a transient Launchpad blip does not fail CI.
-          for attempt in 1 2 3 4 5; do
-            add-apt-repository -y ppa:ubuntu-toolchain-r/test && break
-            echo "::warning::add-apt-repository ppa:ubuntu-toolchain-r/test failed (attempt ${attempt}/5); retrying"
-            sleep $((attempt * 10))
-          done
+          add-apt-repository -y ppa:ubuntu-toolchain-r/test
          apt-add-repository -y "deb http://archive.ubuntu.com/ubuntu/ bionic main"
          apt-add-repository -y "deb http://archive.ubuntu.com/ubuntu/ bionic universe"
          apt-add-repository -y "deb http://archive.ubuntu.com/ubuntu/ xenial main"
@@ -180,11 +172,11 @@ jobs:
          apt-add-repository -y "deb http://archive.ubuntu.com/ubuntu/ xenial-updates universe"
          apt-get update
          apt-get install -y --no-install-recommends g++-${{ matrix.compiler }}
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      - name: Get latest CMake and ninja
-        uses: lukka/get-cmake@fffaaafeea488556c2c12dad60690008bc1caacb # v4.4.2
+        uses: lukka/get-cmake@f5b8fbb4d77cec1acc5a5f9f0df4beffaf5d98d9 # v4.3.4
      - name: Run CMake
        run: CXX=g++-${{ matrix.compiler }} cmake -S . -B build -DJSON_CI=On
      - name: Build
@@ -198,11 +190,11 @@ jobs:
        compiler: ['7', '8', '9', '10', '11', '12', '13', '14', '15', 'latest']
    container: gcc:${{ matrix.compiler }}
    steps:
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      - name: Get latest CMake and ninja
-        uses: lukka/get-cmake@fffaaafeea488556c2c12dad60690008bc1caacb # v4.4.2
+        uses: lukka/get-cmake@f5b8fbb4d77cec1acc5a5f9f0df4beffaf5d98d9 # v4.3.4
      - name: Run CMake
        run: cmake -S . -B build -DJSON_CI=On
      - name: Build
@@ -212,14 +204,14 @@ jobs:
    runs-on: ubuntu-latest
    strategy:
      matrix:
-        compiler: ['3.4', '3.5', '3.6', '3.7', '3.8', '3.9', '4', '5', '6', '7', '8', '9', '10', '11', '12', '13', '14', '15-bullseye', '16', '17', '18', '19', '20', '21', '22', 'latest']
+        compiler: ['3.4', '3.5', '3.6', '3.7', '3.8', '3.9', '4', '5', '6', '7', '8', '9', '10', '11', '12', '13', '14', '15-bullseye', '16', '17', '18', '19', '20', 'latest']
    container: silkeh/clang:${{ matrix.compiler }}
    steps:
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      - name: Get latest CMake and ninja
-        uses: lukka/get-cmake@fffaaafeea488556c2c12dad60690008bc1caacb # v4.4.2
+        uses: lukka/get-cmake@f5b8fbb4d77cec1acc5a5f9f0df4beffaf5d98d9 # v4.3.4
      - name: Set env FORCE_STDCPPFS_FLAG for clang 7 / 8 / 9 / 10
        run: echo "JSON_FORCED_GLOBAL_COMPILE_OPTIONS=-DJSON_HAS_FILESYSTEM=0;-DJSON_HAS_EXPERIMENTAL_FILESYSTEM=0" >> "$GITHUB_ENV"
        if: ${{ matrix.compiler == '7' || matrix.compiler == '8' || matrix.compiler == '9' || matrix.compiler == '10' }}
@@ -235,11 +227,11 @@ jobs:
      matrix:
        standard: [11, 14, 17, 20, 23, 26]
    steps:
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      - name: Get latest CMake and ninja
-        uses: lukka/get-cmake@fffaaafeea488556c2c12dad60690008bc1caacb # v4.4.2
+        uses: lukka/get-cmake@f5b8fbb4d77cec1acc5a5f9f0df4beffaf5d98d9 # v4.3.4
      - name: Run CMake
        run: cmake -S . -B build -DJSON_CI=On
      - name: Build
@@ -255,11 +247,11 @@ jobs:
    steps:
      - name: Install git and unzip
        run: apt-get update ; apt-get install -y git unzip
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      - name: Get latest CMake and ninja
-        uses: lukka/get-cmake@fffaaafeea488556c2c12dad60690008bc1caacb # v4.4.2
+        uses: lukka/get-cmake@f5b8fbb4d77cec1acc5a5f9f0df4beffaf5d98d9 # v4.3.4
      - name: Run CMake
        run: cmake -S . -B build -DJSON_CI=On
      - name: Build with libc++
@@ -282,11 +274,11 @@ jobs:
        cuda: ['11.8.0', '12.1.1', '12.6.3']
    container: nvidia/cuda:${{ matrix.cuda }}-devel-ubuntu22.04
    steps:
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      - name: Get latest CMake and ninja
-        uses: lukka/get-cmake@fffaaafeea488556c2c12dad60690008bc1caacb # v4.4.2
+        uses: lukka/get-cmake@f5b8fbb4d77cec1acc5a5f9f0df4beffaf5d98d9 # v4.3.4
      - name: Run CMake
        run: cmake -S . -B build -DJSON_CI=On
      - name: Build
@@ -299,14 +291,14 @@ jobs:
    runs-on: ubuntu-latest
    container: ${{ matrix.container }}
    steps:
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      # The module test uses `import std;`, which needs CMake's experimental
      # import-std support. Its opt-in token is CMake-version-specific, so pin
      # CMake to the version whose token is set in tests/module_cpp20/CMakeLists.txt.
      - name: Get pinned CMake and ninja
-        uses: lukka/get-cmake@fffaaafeea488556c2c12dad60690008bc1caacb # v4.4.2
+        uses: lukka/get-cmake@f5b8fbb4d77cec1acc5a5f9f0df4beffaf5d98d9 # v4.3.4
        with:
          cmakeVersion: 4.3.4
      # Clang: the std library module is provided by libc++ (the image's libstdc++
@@ -328,11 +320,11 @@ jobs:
    # Intel's own last officially published image that still includes it.
    container: intel/oneapi-hpckit:2023.2.1-devel-ubuntu22.04
    steps:
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      - name: Get latest CMake and ninja
-        uses: lukka/get-cmake@fffaaafeea488556c2c12dad60690008bc1caacb # v4.4.2
+        uses: lukka/get-cmake@f5b8fbb4d77cec1acc5a5f9f0df4beffaf5d98d9 # v4.3.4
      - name: Run CMake
        run: cmake -S . -B build -DJSON_CI=On
      - name: Build
@@ -345,9 +337,9 @@ jobs:
    runs-on: ubuntu-latest
    container: intel/oneapi-hpckit:latest
    steps:
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
      - name: Get latest CMake and ninja
-        uses: lukka/get-cmake@fffaaafeea488556c2c12dad60690008bc1caacb # v4.4.2
+        uses: lukka/get-cmake@f5b8fbb4d77cec1acc5a5f9f0df4beffaf5d98d9 # v4.3.4
      - name: Run CMake
        run: cmake -S . -B build -DJSON_CI=On
      - name: Build
@@ -357,9 +349,9 @@ jobs:
    runs-on: ubuntu-latest
    container: nvcr.io/nvidia/nvhpc:25.5-devel-cuda12.9-ubuntu22.04
    steps:
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
      - name: Get latest CMake and ninja
-        uses: lukka/get-cmake@fffaaafeea488556c2c12dad60690008bc1caacb # v4.4.2
+        uses: lukka/get-cmake@f5b8fbb4d77cec1acc5a5f9f0df4beffaf5d98d9 # v4.3.4
      - name: Run CMake
        run: cmake -S . -B build -DJSON_CI=On
      - name: Build
@@ -369,17 +361,17 @@ jobs:
    runs-on: ubuntu-latest
    steps:
      - name: Harden Runner
-        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
+        uses: step-security/harden-runner@bf7454d06d71f1098171f2acdf0cd4708d7b5920 # v2.20.0
        with:
          egress-policy: audit

      - name: Install emscripten
        uses: mymindstorm/setup-emsdk@4528d102f7230f0e7b276855c01ea1159be0e984 # v16
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      - name: Get latest CMake and ninja
-        uses: lukka/get-cmake@fffaaafeea488556c2c12dad60690008bc1caacb # v4.4.2
+        uses: lukka/get-cmake@f5b8fbb4d77cec1acc5a5f9f0df4beffaf5d98d9 # v4.3.4
      - name: Run CMake
        run: cmake -S . -B build -DCMAKE_TOOLCHAIN_FILE=$EMSDK/upstream/emscripten/cmake/Modules/Platform/Emscripten.cmake -GNinja
      - name: Build
@@ -392,11 +384,11 @@ jobs:
        target: [ci_test_examples, ci_test_build_documentation]
    steps:
      - name: Harden Runner
-        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
+        uses: step-security/harden-runner@bf7454d06d71f1098171f2acdf0cd4708d7b5920 # v2.20.0
        with:
          egress-policy: audit

-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      - name: Run CMake
@@ -24,7 +24,7 @@ jobs:
        architecture: [x64, x86]

    steps:
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      - name: Set up MinGW
@@ -49,7 +49,7 @@ jobs:
    runs-on: windows-2022

    steps:
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      - name: Set extra CXX_FLAGS for latest std_version
@@ -86,9 +86,9 @@ jobs:
    runs-on: windows-2025

    steps:
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
      - name: Get latest CMake and ninja
-        uses: lukka/get-cmake@fffaaafeea488556c2c12dad60690008bc1caacb # v4.4.2
+        uses: lukka/get-cmake@f5b8fbb4d77cec1acc5a5f9f0df4beffaf5d98d9 # v4.3.4
      - name: Set extra CXX_FLAGS for latest std_version
        # /wd5285 silences C5285 emitted by the bundled third-party doctest.h, which
        # specializes std::tuple (newly diagnosed by the VS2026 v145 toolset)
@@ -122,13 +122,13 @@ jobs:
    runs-on: windows-11-arm

    steps:
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
      - name: Run CMake (Release)
-        run: cmake -S . -B build -G "Visual Studio 18 2026" -A ARM64 -DJSON_BuildTests=On -DCMAKE_CXX_FLAGS="/W4 /WX"
+        run: cmake -S . -B build -G "Visual Studio 17 2022" -A ARM64 -DJSON_BuildTests=On -DCMAKE_CXX_FLAGS="/W4 /WX"
        if: matrix.build_type == 'Release'
        shell: pwsh
      - name: Run CMake (Debug)
-        run: cmake -S . -B build -G "Visual Studio 18 2026" -A ARM64 -DJSON_BuildTests=On -DJSON_FastTests=ON -DCMAKE_CXX_FLAGS="/W4 /WX"
+        run: cmake -S . -B build -G "Visual Studio 17 2022" -A ARM64 -DJSON_BuildTests=On -DJSON_FastTests=ON -DCMAKE_CXX_FLAGS="/W4 /WX"
        if: matrix.build_type == 'Debug'
        shell: pwsh
      - name: Build
@@ -143,7 +143,7 @@ jobs:
        version: [11.0.1, 12.0.1, 13.0.1, 14.0.6, 15.0.7, 16.0.6, 18.1.8, 19.1.7, 20.1.8]

    steps:
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      - name: Install Clang
@@ -153,20 +153,10 @@ jobs:
        with:
          platform: x64
          version: 12.2.0 # https://github.com/egor-tensin/setup-mingw/issues/14
-      # CMAKE_CXX_FLAGS_DEBUG is overridden to drop the default -g: linking
-      # test-regression2_cpp20 intermittently fails with "relocation truncated
-      # to fit: IMAGE_REL_AMD64_SECREL against `.debug_line'" because the
-      # MinGW linker cannot relocate the debug sections this test produces.
-      # The tests are only built and run here, so the debug info is not used.
-      # Do not add -O1 here to shrink the objects further: it does make them
-      # link, but the binaries clang 11.0.1 and clang 18.1.8 then produce crash
-      # before doctest prints its first line - 39 of 102 tests on clang 18.
-      # Keep the objects small by splitting the test files instead.
      - name: Run CMake
        run: cmake -S . -B build ^
             -DCMAKE_CXX_COMPILER="C:/Program Files/LLVM/bin/clang++.exe" ^
             -DCMAKE_CXX_FLAGS="--target=x86_64-w64-mingw32 -stdlib=libstdc++ -pthread" ^
-             -DCMAKE_CXX_FLAGS_DEBUG="-g0" ^
             -DCMAKE_EXE_LINKER_FLAGS="-lwinpthread" ^
             -G"MinGW Makefiles" ^
             -DCMAKE_BUILD_TYPE=Debug ^
@@ -183,7 +173,7 @@ jobs:
        architecture: [Win32, x64]

    steps:
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      - name: Run CMake
@@ -196,14 +186,14 @@ jobs:
  ci_module_cpp20:
    runs-on: windows-2022
    steps:
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
        with:
          persist-credentials: false
      # The module test uses `import std;`, which needs CMake's experimental
      # import-std support. Its opt-in token is CMake-version-specific, so pin
      # CMake to the version whose token is set in tests/module_cpp20/CMakeLists.txt.
      - name: Get pinned CMake and ninja
-        uses: lukka/get-cmake@fffaaafeea488556c2c12dad60690008bc1caacb # v4.4.2
+        uses: lukka/get-cmake@f5b8fbb4d77cec1acc5a5f9f0df4beffaf5d98d9 # v4.3.4
        with:
          cmakeVersion: 4.3.4
      - name: Run CMake (Debug)
@@ -20,9 +20,7 @@ cc_library(
    hdrs = [
        "include/nlohmann/adl_serializer.hpp",
        "include/nlohmann/byte_container_with_subtype.hpp",
-        "include/nlohmann/detail/abi_config.hpp",
        "include/nlohmann/detail/abi_macros.hpp",
-        "include/nlohmann/detail/bit_ops.hpp",
        "include/nlohmann/detail/conversions/from_json.hpp",
        "include/nlohmann/detail/conversions/to_chars.hpp",
        "include/nlohmann/detail/conversions/to_json.hpp",
@@ -32,11 +30,8 @@ cc_library(
        "include/nlohmann/detail/input/input_adapters.hpp",
        "include/nlohmann/detail/input/json_sax.hpp",
        "include/nlohmann/detail/input/lexer.hpp",
-        "include/nlohmann/detail/input/number_parse.hpp",
        "include/nlohmann/detail/input/parser.hpp",
        "include/nlohmann/detail/input/position_t.hpp",
-        "include/nlohmann/detail/input/pow5_table.hpp",
-        "include/nlohmann/detail/input/string_scan.hpp",
        "include/nlohmann/detail/iterators/internal_iterator.hpp",
        "include/nlohmann/detail/iterators/iter_impl.hpp",
        "include/nlohmann/detail/iterators/iteration_proxy.hpp",
@@ -54,51 +49,31 @@ cc_library(
        "include/nlohmann/detail/meta/detected.hpp",
        "include/nlohmann/detail/meta/identity_tag.hpp",
        "include/nlohmann/detail/meta/is_sax.hpp",
-        "include/nlohmann/detail/meta/logic.hpp",
        "include/nlohmann/detail/meta/std_fs.hpp",
        "include/nlohmann/detail/meta/type_traits.hpp",
        "include/nlohmann/detail/meta/void_t.hpp",
        "include/nlohmann/detail/output/binary_writer.hpp",
        "include/nlohmann/detail/output/output_adapters.hpp",
        "include/nlohmann/detail/output/serializer.hpp",
-        "include/nlohmann/detail/recursion_depth_limit.hpp",
        "include/nlohmann/detail/string_concat.hpp",
        "include/nlohmann/detail/string_escape.hpp",
        "include/nlohmann/detail/string_utils.hpp",
        "include/nlohmann/detail/value_t.hpp",
-        "include/nlohmann/detail/view/builder.hpp",
-        "include/nlohmann/detail/view/compare.hpp",
-        "include/nlohmann/detail/view/document_data.hpp",
-        "include/nlohmann/detail/view/errors.hpp",
-        "include/nlohmann/detail/view/input.hpp",
-        "include/nlohmann/detail/view/iterator.hpp",
-        "include/nlohmann/detail/view/lookup.hpp",
-        "include/nlohmann/detail/view/macro_scope.hpp",
-        "include/nlohmann/detail/view/macro_unscope.hpp",
-        "include/nlohmann/detail/view/materialize.hpp",
-        "include/nlohmann/detail/view/node.hpp",
-        "include/nlohmann/detail/view/number.hpp",
-        "include/nlohmann/detail/view/pointer.hpp",
-        "include/nlohmann/detail/view/scan.hpp",
-        "include/nlohmann/detail/view/serializer.hpp",
-        "include/nlohmann/detail/view/string_ref.hpp",
-        "include/nlohmann/detail/view/value.hpp",
        "include/nlohmann/json.hpp",
        "include/nlohmann/json_fwd.hpp",
-        "include/nlohmann/json_view.hpp",
        "include/nlohmann/ordered_map.hpp",
        "include/nlohmann/thirdparty/hedley/hedley.hpp",
        "include/nlohmann/thirdparty/hedley/hedley_undef.hpp",
    ],
    includes = ["include"],
    visibility = ["//visibility:public"],
+    alwayslink = True,
 )

 cc_library(
    name = "singleheader-json",
    hdrs = [
        "single_include/nlohmann/json.hpp",
-        "single_include/nlohmann/json_view.hpp",
    ],
    includes = ["single_include"],
    visibility = ["//visibility:public"],
@@ -59,7 +59,6 @@ option(JSON_LegacyDiscardedValueComparison "Enable legacy discarded value compar
 option(JSON_Install                        "Install CMake targets during install step." ${MAIN_PROJECT})
 option(JSON_MultipleHeaders                "Use non-amalgamated version of the library." ON)
 option(JSON_SystemInclude                  "Include as system headers (skip for clang-tidy)." OFF)
-option(JSON_StrictNulHandling              "Build with strict NUL-byte handling enabled." OFF)

 if (JSON_CI)
    include(ci)
@@ -109,10 +108,6 @@ if (JSON_Diagnostics)
    message(STATUS "Diagnostics enabled (JSON_DIAGNOSTICS=1)")
 endif()

-if (JSON_StrictNulHandling)
-    message(STATUS "Strict NUL-byte handling enabled (JSON_STRICT_NUL_HANDLING=1)")
-endif()
-
 if (JSON_Diagnostic_Positions)
    message(STATUS "Diagnostic positions enabled (JSON_DIAGNOSTIC_POSITIONS=1)")
 endif()
@@ -146,7 +141,6 @@ target_compile_definitions(
    $<$<BOOL:${JSON_Diagnostics}>:JSON_DIAGNOSTICS=1>
    $<$<BOOL:${JSON_Diagnostic_Positions}>:JSON_DIAGNOSTIC_POSITIONS=1>
    $<$<BOOL:${JSON_LegacyDiscardedValueComparison}>:JSON_USE_LEGACY_DISCARDED_VALUE_COMPARISON=1>
-    $<$<BOOL:${JSON_StrictNulHandling}>:JSON_STRICT_NUL_HANDLING=1>
 )

 target_include_directories(
@@ -250,16 +250,12 @@ Further documentation:

 ### `BUILD.bazel`

-The build definition for [Bazel](https://bazel.build). The file is generated by
-`cmake/scripts/gen_bazel_build_file.cmake`, which derives the header list from the files in `include`; change the
-script rather than editing the file by hand. The file can be updated by calling
+The file can be updated by calling

 ```shell
 make BUILD.bazel
 ```

-The "Check amalgamation" workflow fails if the file is out of date.
-
 ### `meson.build`

 The build definition for the [Meson](https://mesonbuild.com) build system.
@@ -1,4 +1,4 @@
-.PHONY: pretty clean ChangeLog.md release update_hedley update_hedley_undef BUILD.bazel
+.PHONY: pretty clean ChangeLog.md release

 ##########################################################################
 # configuration
@@ -21,7 +21,6 @@ TESTS_SRCS=$(shell find tests -type f \( -name '*.hpp' -o -name '*.cpp' -o -name
 # the single headers (amalgamated from the source files)
 AMALGAMATED_FILE=single_include/nlohmann/json.hpp
 AMALGAMATED_FWD_FILE=single_include/nlohmann/json_fwd.hpp
-AMALGAMATED_VIEW_FILE=single_include/nlohmann/json_view.hpp


 ##########################################################################
@@ -30,23 +29,18 @@ AMALGAMATED_VIEW_FILE=single_include/nlohmann/json_view.hpp

 # main target
 all:
-	@echo "amalgamate - amalgamate files single_include/nlohmann/json{,_fwd,_view}.hpp from the include/nlohmann sources"
-	@echo "BUILD.bazel - regenerate the Bazel BUILD file from the include/nlohmann sources"
+	@echo "amalgamate - amalgamate files single_include/nlohmann/json{,_fwd}.hpp from the include/nlohmann sources"
 	@echo "ChangeLog.md - generate ChangeLog file"
-	@echo "check-amalgamation - check whether sources have been amalgamated and BUILD.bazel is up to date"
+	@echo "check-amalgamation - check whether sources have been amalgamated"
 	@echo "clean - remove built files"
 	@echo "doctest - compile example files and check their output"
 	@echo "fuzz_testing - prepare fuzz testing of the JSON parser"
-	@echo "fuzz_testing_bon8 - prepare fuzz testing of the BON8 parser"
 	@echo "fuzz_testing_bson - prepare fuzz testing of the BSON parser"
 	@echo "fuzz_testing_cbor - prepare fuzz testing of the CBOR parser"
-	@echo "fuzz_testing_json_view - prepare fuzz testing of the json_document/json_view parser"
 	@echo "fuzz_testing_msgpack - prepare fuzz testing of the MessagePack parser"
 	@echo "fuzz_testing_ubjson - prepare fuzz testing of the UBJSON parser"
 	@echo "pretty - beautify code with Artistic Style"
 	@echo "run_benchmarks - build and run benchmarks"
-	@echo "update_hedley - download Hedley and regenerate hedley.hpp / hedley_undef.hpp"
-	@echo "update_hedley_undef - rebuild hedley_undef.hpp from the JSON_HEDLEY_* #define names in hedley.hpp"


 ##########################################################################
@@ -74,14 +68,6 @@ fuzz_testing:
 	find tests/data/json_tests -size -5k -name *json | xargs -I{} cp "{}" fuzz-testing/testcases
 	@echo "Execute: afl-fuzz -i fuzz-testing/testcases -o fuzz-testing/out fuzz-testing/fuzzer"

-fuzz_testing_bon8:
-	rm -fr fuzz-testing
-	mkdir -p fuzz-testing fuzz-testing/testcases fuzz-testing/out
-	$(MAKE) parse_bon8_fuzzer -C tests CXX=afl-clang++
-	mv tests/parse_bon8_fuzzer fuzz-testing/fuzzer
-	find tests/data -size -5k -name *.bon8 | xargs -I{} cp "{}" fuzz-testing/testcases
-	@echo "Execute: afl-fuzz -i fuzz-testing/testcases -o fuzz-testing/out fuzz-testing/fuzzer"
-
 fuzz_testing_bson:
 	rm -fr fuzz-testing
 	mkdir -p fuzz-testing fuzz-testing/testcases fuzz-testing/out
@@ -98,14 +84,6 @@ fuzz_testing_cbor:
 	find tests/data -size -5k -name *.cbor | xargs -I{} cp "{}" fuzz-testing/testcases
 	@echo "Execute: afl-fuzz -i fuzz-testing/testcases -o fuzz-testing/out fuzz-testing/fuzzer"

-fuzz_testing_json_view:
-	rm -fr fuzz-testing
-	mkdir -p fuzz-testing fuzz-testing/testcases fuzz-testing/out
-	$(MAKE) parse_json_view_fuzzer -C tests CXX=afl-clang++
-	mv tests/parse_json_view_fuzzer fuzz-testing/fuzzer
-	find tests/data/json_tests -size -5k -name *json | xargs -I{} cp "{}" fuzz-testing/testcases
-	@echo "Execute: afl-fuzz -i fuzz-testing/testcases -o fuzz-testing/out fuzz-testing/fuzzer"
-
 fuzz_testing_msgpack:
 	rm -fr fuzz-testing
 	mkdir -p fuzz-testing fuzz-testing/testcases fuzz-testing/out
@@ -164,14 +142,14 @@ install_astyle:

 # call the Artistic Style pretty printer on all source files
 pretty: install_astyle
-	$(ASTYLE) --project=tools/astyle/.astylerc $(SRCS) $(TESTS_SRCS) $(AMALGAMATED_FILE) $(AMALGAMATED_FWD_FILE) $(AMALGAMATED_VIEW_FILE) docs/mkdocs/docs/examples/*.cpp
+	$(ASTYLE) --project=tools/astyle/.astylerc $(SRCS) $(TESTS_SRCS) $(AMALGAMATED_FILE) $(AMALGAMATED_FWD_FILE) docs/mkdocs/docs/examples/*.cpp

 # call the Clang-Format on all source files
 pretty_format:
 	for FILE in $(SRCS) $(TESTS_SRCS) $(AMALGAMATED_FILE) docs/mkdocs/docs/examples/*.cpp; do echo $$FILE; clang-format -i $$FILE; done

 # create single header files and pretty print
-amalgamate: $(AMALGAMATED_FILE) $(AMALGAMATED_FWD_FILE) $(AMALGAMATED_VIEW_FILE)
+amalgamate: $(AMALGAMATED_FILE) $(AMALGAMATED_FWD_FILE)
 	$(MAKE) pretty

 # call the amalgamation tool for json.hpp
@@ -182,30 +160,18 @@ $(AMALGAMATED_FILE): $(SRCS)
 $(AMALGAMATED_FWD_FILE): $(SRCS)
 	tools/amalgamate/amalgamate.py -c tools/amalgamate/config_json_fwd.json -s . --verbose=yes

-# call the amalgamation tool for json_view.hpp (keeps including json.hpp)
-$(AMALGAMATED_VIEW_FILE): $(SRCS)
-	tools/amalgamate/amalgamate.py -c tools/amalgamate/config_json_view.json -s . --verbose=yes
-
 # check if file single_include/nlohmann/json.hpp has been amalgamated from the nlohmann sources
 # Note: this target is called by Travis
 check-amalgamation:
 	@mv $(AMALGAMATED_FILE) $(AMALGAMATED_FILE)~
 	@mv $(AMALGAMATED_FWD_FILE) $(AMALGAMATED_FWD_FILE)~
-	@mv $(AMALGAMATED_VIEW_FILE) $(AMALGAMATED_VIEW_FILE)~
 	@$(MAKE) amalgamate
 	@diff $(AMALGAMATED_FILE) $(AMALGAMATED_FILE)~ || (echo "===================================================================\n  Amalgamation required! Please read the contribution guidelines\n  in file .github/CONTRIBUTING.md.\n===================================================================" ; mv $(AMALGAMATED_FILE)~ $(AMALGAMATED_FILE) ; false)
 	@diff $(AMALGAMATED_FWD_FILE) $(AMALGAMATED_FWD_FILE)~ || (echo "===================================================================\n  Amalgamation required! Please read the contribution guidelines\n  in file .github/CONTRIBUTING.md.\n===================================================================" ; mv $(AMALGAMATED_FWD_FILE)~ $(AMALGAMATED_FWD_FILE) ; false)
-	@diff $(AMALGAMATED_VIEW_FILE) $(AMALGAMATED_VIEW_FILE)~ || (echo "===================================================================\n  Amalgamation required! Please read the contribution guidelines\n  in file .github/CONTRIBUTING.md.\n===================================================================" ; mv $(AMALGAMATED_VIEW_FILE)~ $(AMALGAMATED_VIEW_FILE) ; false)
 	@mv $(AMALGAMATED_FILE)~ $(AMALGAMATED_FILE)
 	@mv $(AMALGAMATED_FWD_FILE)~ $(AMALGAMATED_FWD_FILE)
-	@mv $(AMALGAMATED_VIEW_FILE)~ $(AMALGAMATED_VIEW_FILE)
-	@mv BUILD.bazel BUILD.bazel~
-	@$(MAKE) BUILD.bazel
-	@diff BUILD.bazel BUILD.bazel~ || (echo "===================================================================\n  BUILD.bazel is out of date! Please run 'make BUILD.bazel'.\n===================================================================" ; mv BUILD.bazel~ BUILD.bazel ; false)
-	@mv BUILD.bazel~ BUILD.bazel

-# generate the Bazel BUILD file; phony, because a removed header would not trigger a rebuild
-BUILD.bazel:
+BUILD.bazel: $(SRCS)
 	cmake -P cmake/scripts/gen_bazel_build_file.cmake

 ##########################################################################
@@ -239,7 +205,7 @@ json.tar.xz:
 # We use `-X` to make the resulting ZIP file reproducible, see
 # <https://content.pivotal.io/blog/barriers-to-deterministic-reproducible-zip-files>.
 include.zip: BUILD.bazel
-	zip -9 --recurse-paths -X include.zip $(SRCS) $(AMALGAMATED_FILE) $(AMALGAMATED_FWD_FILE) $(AMALGAMATED_VIEW_FILE) BUILD.bazel MODULE.bazel meson.build LICENSE.MIT
+	zip -9 --recurse-paths -X include.zip $(SRCS) $(AMALGAMATED_FILE) $(AMALGAMATED_FWD_FILE) BUILD.bazel MODULE.bazel meson.build LICENSE.MIT

 # Create the files for a release and add signatures and hashes.
 release: include.zip json.tar.xz
@@ -248,13 +214,11 @@ release: include.zip json.tar.xz
 	gpg --armor --detach-sig include.zip
 	gpg --armor --detach-sig $(AMALGAMATED_FILE)
 	gpg --armor --detach-sig $(AMALGAMATED_FWD_FILE)
-	gpg --armor --detach-sig $(AMALGAMATED_VIEW_FILE)
 	gpg --armor --detach-sig json.tar.xz
 	cp $(AMALGAMATED_FILE) release_files
 	cp $(AMALGAMATED_FWD_FILE) release_files
-	cp $(AMALGAMATED_VIEW_FILE) release_files
-	mv $(AMALGAMATED_FILE).asc $(AMALGAMATED_FWD_FILE).asc $(AMALGAMATED_VIEW_FILE).asc json.tar.xz json.tar.xz.asc include.zip include.zip.asc release_files
-	cd release_files ; shasum -a 256 json.hpp json_view.hpp include.zip json.tar.xz > hashes.txt
+	mv $(AMALGAMATED_FILE).asc $(AMALGAMATED_FWD_FILE).asc json.tar.xz json.tar.xz.asc include.zip include.zip.asc release_files
+	cd release_files ; shasum -a 256 json.hpp include.zip json.tar.xz > hashes.txt


 ##########################################################################
@@ -277,24 +241,11 @@ update_hedley:
 	rm -f include/nlohmann/thirdparty/hedley/hedley.hpp include/nlohmann/thirdparty/hedley/hedley_undef.hpp
 	curl https://raw.githubusercontent.com/nemequ/hedley/master/hedley.h -o include/nlohmann/thirdparty/hedley/hedley.hpp
 	$(SED) -i 's/HEDLEY_/JSON_HEDLEY_/g' include/nlohmann/thirdparty/hedley/hedley.hpp
+	grep "[[:blank:]]*#[[:blank:]]*undef" include/nlohmann/thirdparty/hedley/hedley.hpp | grep -v "__" | sort | uniq | $(SED) 's/ //g' | $(SED) 's/undef/undef /g' > include/nlohmann/thirdparty/hedley/hedley_undef.hpp
 	$(SED) -i '1s/^/#pragma once\n\n/' include/nlohmann/thirdparty/hedley/hedley.hpp
-	$(MAKE) update_hedley_undef
+	$(SED) -i '1s/^/#pragma once\n\n/' include/nlohmann/thirdparty/hedley/hedley_undef.hpp
 	$(MAKE) amalgamate

-# Rebuild hedley_undef.hpp from every JSON_HEDLEY_* name that hedley.hpp
-# #defines. Hedley does not #undef all of its public macros internally (see
-# #5408), so grepping those #undef lines misses names such as
-# JSON_HEDLEY_PRAGMA. cmake/scripts/gen_hedley_undef_check.cmake is the
-# single source of truth for this extraction (tests/CMakeLists.txt uses the
-# same script, in MODE=checks, to generate the matching leak-check test), so
-# the vendored header, the generated #undef list, and the regression test
-# cannot drift apart.
-update_hedley_undef:
-	cmake -DHEDLEY_HPP=include/nlohmann/thirdparty/hedley/hedley.hpp \
-	      -DOUTPUT=include/nlohmann/thirdparty/hedley/hedley_undef.hpp \
-	      -DMODE=undef \
-	      -P cmake/scripts/gen_hedley_undef_check.cmake
-
 ##########################################################################
 # serve_header.py
 ##########################################################################
@@ -17,7 +17,7 @@
 [![GitHub Downloads](https://img.shields.io/github/downloads/nlohmann/json/total)](https://github.com/nlohmann/json/releases)
 [![GitHub Issues](https://img.shields.io/github/issues/nlohmann/json.svg)](https://github.com/nlohmann/json/issues)
 [![Average time to resolve an issue](https://isitmaintained.com/badge/resolution/nlohmann/json.svg)](https://isitmaintained.com/project/nlohmann/json "Average time to resolve an issue")
-[![OpenSSF Best Practices](https://www.bestpractices.dev/projects/289/badge)](https://www.bestpractices.dev/projects/289)
+[![CII Best Practices](https://bestpractices.coreinfrastructure.org/projects/289/badge)](https://bestpractices.coreinfrastructure.org/projects/289)
 [![OpenSSF Scorecard](https://api.scorecard.dev/projects/github.com/nlohmann/json/badge)](https://scorecard.dev/viewer/?uri=github.com/nlohmann/json)
 [![Backup Status](https://app.cloudback.it/badge/nlohmann/json)](https://cloudback.it)
 [![GitHub Sponsors](https://img.shields.io/badge/GitHub-Sponsors-ff69b4)](https://github.com/sponsors/nlohmann)
@@ -40,9 +40,8 @@
  - [Implicit conversions](#implicit-conversions)
  - [Conversions to/from arbitrary types](#arbitrary-types-conversions)
  - [Specializing enum conversion](#specializing-enum-conversion)
-  - [Binary formats (BSON, CBOR, MessagePack, UBJSON, BJData, and BON8)](#binary-formats-bson-cbor-messagepack-ubjson-bjdata-and-bon8)
+  - [Binary formats (BSON, CBOR, MessagePack, UBJSON, and BJData)](#binary-formats-bson-cbor-messagepack-ubjson-and-bjdata)
 - [Customers](#customers)
- [Ecosystem](#ecosystem)
 - [Supported compilers](#supported-compilers)
 - [Integration](#integration)
  - [CMake](#cmake)
@@ -63,7 +62,7 @@ There are myriads of [JSON](https://json.org) libraries out there, and each may

 - **Trivial integration**. Our whole code consists of a single header file [`json.hpp`](https://github.com/nlohmann/json/blob/develop/single_include/nlohmann/json.hpp). That's it. No library, no subproject, no dependencies, no complex build system. The class is written in vanilla C++11. All in all, everything should require no adjustment of your compiler flags or project settings. The library is also included in all popular [package managers](https://json.nlohmann.me/integration/package_managers/).

- **Serious testing**. Our code is heavily [unit-tested](https://github.com/nlohmann/json/tree/develop/tests/src) and covers [100%](https://coveralls.io/r/nlohmann/json) of the code, including all exceptional behavior. Furthermore, we checked with [Valgrind](https://valgrind.org) and the [Clang Sanitizers](https://clang.llvm.org/docs/index.html) that there are no memory leaks. [Google OSS-Fuzz](https://github.com/google/oss-fuzz/tree/master/projects/json) additionally runs fuzz tests against all parsers 24/7, effectively executing billions of tests so far. To maintain high quality, the project is following the [OpenSSF Best Practices](https://www.bestpractices.dev/projects/289). See the [quality assurance](https://json.nlohmann.me/community/quality_assurance) overview documentation.
+- **Serious testing**. Our code is heavily [unit-tested](https://github.com/nlohmann/json/tree/develop/tests/src) and covers [100%](https://coveralls.io/r/nlohmann/json) of the code, including all exceptional behavior. Furthermore, we checked with [Valgrind](https://valgrind.org) and the [Clang Sanitizers](https://clang.llvm.org/docs/index.html) that there are no memory leaks. [Google OSS-Fuzz](https://github.com/google/oss-fuzz/tree/master/projects/json) additionally runs fuzz tests against all parsers 24/7, effectively executing billions of tests so far. To maintain high quality, the project is following the [Core Infrastructure Initiative (CII) best practices](https://bestpractices.coreinfrastructure.org/projects/289). See the [quality assurance](https://json.nlohmann.me/community/quality_assurance) overview documentation.

 Other aspects were not so important to us:

@@ -91,6 +90,7 @@ You can sponsor this library at [GitHub Sponsors](https://github.com/sponsors/nl
 - [Steve Sperandeo](https://github.com/homer6)
 - [Robert Jefe Lindstädt](https://github.com/eljefedelrodeodeljefe)
 - [Steve Wagner](https://github.com/ciroque)
+- [Lion Yang](https://github.com/LionNatsu)

 ### Further support

@@ -128,7 +128,7 @@ There is also a [**docset**](https://github.com/Kapeli/Dash-User-Contributions/t
 - **JSON Pointer functions**: [flatten](https://json.nlohmann.me/api/basic_json/flatten), [unflatten](https://json.nlohmann.me/api/basic_json/unflatten)
 - **JSON Patch functions**: [patch](https://json.nlohmann.me/api/basic_json/patch), [patch_inplace](https://json.nlohmann.me/api/basic_json/patch_inplace), [diff](https://json.nlohmann.me/api/basic_json/diff), [merge_patch](https://json.nlohmann.me/api/basic_json/merge_patch)
 - **Static functions**: [meta](https://json.nlohmann.me/api/basic_json/meta), [get_allocator](https://json.nlohmann.me/api/basic_json/get_allocator)
- **Binary formats**: [from_bjdata](https://json.nlohmann.me/api/basic_json/from_bjdata), [from_bon8](https://json.nlohmann.me/api/basic_json/from_bon8), [from_bson](https://json.nlohmann.me/api/basic_json/from_bson), [from_cbor](https://json.nlohmann.me/api/basic_json/from_cbor), [from_msgpack](https://json.nlohmann.me/api/basic_json/from_msgpack), [from_ubjson](https://json.nlohmann.me/api/basic_json/from_ubjson), [to_bjdata](https://json.nlohmann.me/api/basic_json/to_bjdata), [to_bon8](https://json.nlohmann.me/api/basic_json/to_bon8), [to_bson](https://json.nlohmann.me/api/basic_json/to_bson), [to_cbor](https://json.nlohmann.me/api/basic_json/to_cbor), [to_msgpack](https://json.nlohmann.me/api/basic_json/to_msgpack), [to_ubjson](https://json.nlohmann.me/api/basic_json/to_ubjson)
+- **Binary formats**: [from_bjdata](https://json.nlohmann.me/api/basic_json/from_bjdata), [from_bson](https://json.nlohmann.me/api/basic_json/from_bson), [from_cbor](https://json.nlohmann.me/api/basic_json/from_cbor), [from_msgpack](https://json.nlohmann.me/api/basic_json/from_msgpack), [from_ubjson](https://json.nlohmann.me/api/basic_json/from_ubjson), [to_bjdata](https://json.nlohmann.me/api/basic_json/to_bjdata), [to_bson](https://json.nlohmann.me/api/basic_json/to_bson), [to_cbor](https://json.nlohmann.me/api/basic_json/to_cbor), [to_msgpack](https://json.nlohmann.me/api/basic_json/to_msgpack), [to_ubjson](https://json.nlohmann.me/api/basic_json/to_ubjson)
 - **Non-member functions**: [operator<<](https://json.nlohmann.me/api/operator_ltlt/), [operator>>](https://json.nlohmann.me/api/operator_gtgt/), [to_string](https://json.nlohmann.me/api/basic_json/to_string)
 - **Literals**: [operator""_json](https://json.nlohmann.me/api/operator_literal_json)
 - **Helper classes**: [std::hash&lt;basic_json&gt;](https://json.nlohmann.me/api/basic_json/std_hash), [std::swap&lt;basic_json&gt;](https://json.nlohmann.me/api/basic_json/std_swap)
@@ -1110,9 +1110,9 @@ Other Important points:
 - When using `get<ENUM_TYPE>()`, undefined JSON values will default to the first pair specified in your map. Select this default pair carefully. If you desire an exception in this circumstance use `NLOHMANN_JSON_SERIALIZE_ENUM_STRICT()` which behaves identically except for throwing an exception on unrecognized values.
 - If an enum or JSON value is specified more than once in your map, the first matching occurrence from the top of the map will be returned when converting to or from JSON.

-### Binary formats (BSON, CBOR, MessagePack, UBJSON, BJData, and BON8)
+### Binary formats (BSON, CBOR, MessagePack, UBJSON, and BJData)

-Though JSON is a ubiquitous data format, it is not a very compact format suitable for data exchange, for instance over a network. Hence, the library supports [BSON](https://bsonspec.org) (Binary JSON), [CBOR](https://cbor.io) (Concise Binary Object Representation), [MessagePack](https://msgpack.org), [UBJSON](https://ubjson.org) (Universal Binary JSON Specification), [BJData](https://neurojson.org/bjdata) (Binary JData), and [BON8](https://github.com/hikoworks/hikogui/blob/main/docs/BON8.md) (Binary Object Notation 8) to efficiently encode JSON values to byte vectors and to decode such vectors.
+Though JSON is a ubiquitous data format, it is not a very compact format suitable for data exchange, for instance over a network. Hence, the library supports [BSON](https://bsonspec.org) (Binary JSON), [CBOR](https://cbor.io) (Concise Binary Object Representation), [MessagePack](https://msgpack.org), [UBJSON](https://ubjson.org) (Universal Binary JSON Specification) and [BJData](https://neurojson.org/bjdata) (Binary JData) to efficiently encode JSON values to byte vectors and to decode such vectors.

 ```cpp
 // create a JSON value
@@ -1149,14 +1149,6 @@ std::vector<std::uint8_t> v_ubjson = json::to_ubjson(j);

 // roundtrip
 json j_from_ubjson = json::from_ubjson(v_ubjson);
-
-// serialize to BON8
-std::vector<std::uint8_t> v_bon8 = json::to_bon8(j);
-
-// 0x88, 0x63, 0x6F, 0x6D, 0x70, 0x61, 0x63, 0x74, 0xF9, 0x73, 0x63, 0x68, 0x65, 0x6D, 0x61, 0x90
-
-// roundtrip
-json j_from_bon8 = json::from_bon8(v_bon8);
 ```

 The library also supports binary types from BSON, CBOR (byte strings), and MessagePack (bin, ext, fixext). They are stored by default as `std::vector<std::uint8_t>` to be processed outside the library.
@@ -1189,25 +1181,12 @@ binary.set_subtype(0x10);
 auto cbor = json::to_msgpack(j); // 0xD5 (fixext2), 0x10, 0xCA, 0xFE
 ```

-### Zero-copy views
-
-Header `<nlohmann/json_view.hpp>` adds `json_document`/`json_view`, a read-only, non-owning way to look at a parsed
-JSON text: parsing builds a flat index (16 bytes per value) instead of a tree, strings and numbers stay in the source
-text, and `materialize()` builds a `json` value for a subtree only when you actually need one. See
-[Zero-copy JSON views](https://json.nlohmann.me/features/json_view/) for the details, including which inputs are
-borrowed and which are copied.
-
 ## Customers

 The library is used in multiple projects, applications, operating systems, etc. The list below is not exhaustive, but the result of an internet search. If you know further customers of the library, please let me know, see [contact](#contact).

 [![logos of customers using the library](docs/mkdocs/docs/images/customers.png)](https://json.nlohmann.me/home/customers/)

-## Ecosystem
-
-Beyond projects that use the library, there are third-party projects that build on top of it - schema validators,
-language bindings, format converters, and the like. See the curated [Ecosystem](https://json.nlohmann.me/community/ecosystem/) page.
-
 ## Supported compilers

 Though it's 2026 already, the support for C++11 is still a bit sparse. Currently, the following compilers are known to work:
@@ -1403,8 +1382,6 @@ THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR I
 - The class contains a slightly modified version of the Grisu2 algorithm from Florian Loitsch which is licensed under the [MIT License](https://opensource.org/licenses/MIT) (see above). Copyright &copy; 2009 [Florian Loitsch](https://florian.loitsch.com/)
 - The class contains a copy of [Hedley](https://nemequ.github.io/hedley/) from Evan Nemerson which is licensed as [CC0-1.0](https://creativecommons.org/publicdomain/zero/1.0/).
 - The class contains parts of [Google Abseil](https://github.com/abseil/abseil-cpp) which is licensed under the [Apache 2.0 License](https://opensource.org/licenses/Apache-2.0).
- The class contains an adapted version of the Eisel-Lemire algorithm and its table of powers of five from [fast_float](https://github.com/fastfloat/fast_float) by Daniel Lemire and contributors, which is available under the [MIT License](https://opensource.org/licenses/MIT) (used here), the Apache 2.0 License, and the Boost Software License. Copyright &copy; 2021 The fast_float authors
- The view's parser (`<nlohmann/json_view.hpp>`) contains techniques and code adapted from [yyjson](https://github.com/ibireme/yyjson) by YaoYuan, which is licensed under the [MIT License](https://opensource.org/licenses/MIT) (see above): table-driven decoding of `\u` escapes and fixed-offset unrolled checks.

 <img align="right" src="https://git.fsfe.org/reuse/reuse-ci/raw/branch/master/reuse-horizontal.png" alt="REUSE Software">

@@ -1439,7 +1416,7 @@ I deeply appreciate the help of the following people.
 6. [Joshua C. Randall](https://github.com/jrandall) fixed a bug in the floating-point serialization.
 7. [Aaron Burghardt](https://github.com/aburgh) implemented code to parse streams incrementally. Furthermore, he greatly improved the parser class by allowing the definition of a filter function to discard undesired elements while parsing.
 8. [Daniel Kopeček](https://github.com/dkopecek) fixed a bug in the compilation with GCC 5.0.
-9. [Fiona Johanna Weber](https://github.com/Fiona-J-W) fixed a bug in and improved the performance of the comparison operators.
+9. [Florian Weber](https://github.com/Florianjw) fixed a bug in and improved the performance of the comparison operators.
 10. [Eric Cornelius](https://github.com/EricMCornelius) pointed out a bug in the handling with NaN and infinity values. He also improved the performance of the string escaping.
 11. [易思龙](https://github.com/likebeta) implemented a conversion from anonymous enums.
 12. [kepkin](https://github.com/kepkin) patiently pushed forward the support for Microsoft Visual Studio.
@@ -1541,14 +1518,14 @@ I deeply appreciate the help of the following people.
 108. [Kevin Tonon](https://github.com/ktonon) overworked the C++11 compiler checks in CMake.
 109. [Axel Huebl](https://github.com/ax3l) simplified a CMake check and added support for the [Spack package manager](https://spack.io).
 110. [Carlos O'Ryan](https://github.com/coryan) fixed a typo.
-111. [James Upjohn](https://github.com/jupjohn) fixed a version number in the compilers section.
+111. [James Upjohn](https://github.com/jammehcow) fixed a version number in the compilers section.
 112. [Chuck Atkins](https://github.com/chuckatkins) adjusted the CMake files to the CMake packaging guidelines and provided documentation for the CMake integration.
 113. [Jan Schöppach](https://github.com/dns13) fixed a typo.
 114. [martin-mfg](https://github.com/martin-mfg) fixed a typo.
 115. [Matthias Möller](https://github.com/TinyTinni) removed the dependency from `std::stringstream`.
 116. [agrianius](https://github.com/agrianius) added code to use alternative string implementations.
 117. [Daniel599](https://github.com/Daniel599) allowed to use more algorithms with the `items()` function.
-118. [Julius Rakow](https://github.com/juliusrakow) fixed the Meson include directory and fixed the links to [cppreference.com](https://cppreference.com).
+118. [Julius Rakow](https://github.com/jrakow) fixed the Meson include directory and fixed the links to [cppreference.com](https://cppreference.com).
 119. [Sonu Lohani](https://github.com/sonulohani) fixed the compilation with MSVC 2015 in debug mode.
 120. [grembo](https://github.com/grembo) fixed the test suite and re-enabled several test cases.
 121. [Hyeon Kim](https://github.com/simnalamburt) introduced the macro `JSON_INTERNAL_CATCH` to control the exception handling inside the library.
@@ -1599,7 +1576,7 @@ I deeply appreciate the help of the following people.
 166. [Mark Beckwith](https://github.com/wythe) fixed a typo.
 167. [yann-morin-1998](https://github.com/yann-morin-1998) helped to reduce the CMake requirement to version 3.1.
 168. [Konstantin Podsvirov](https://github.com/podsvirov) maintains a package for the MSYS2 software distro.
-169. [remyabel](https://github.com/remyabel2) added GNUInstallDirs to the CMake files.
+169. [remyabel](https://github.com/remyabel) added GNUInstallDirs to the CMake files.
 170. [Taylor Howard](https://github.com/taylorhoward92) fixed a unit test.
 171. [Gabe Ron](https://github.com/Macr0Nerd) implemented the `to_string` method.
 172. [Watal M. Iwasaki](https://github.com/heavywatal) fixed a Clang warning.
@@ -1626,7 +1603,7 @@ I deeply appreciate the help of the following people.
 193. [Hubert Chathi](https://github.com/uhoreg) made CMake's version config file architecture-independent.
 194. [OmnipotentEntity](https://github.com/OmnipotentEntity) implemented the binary values for CBOR, MessagePack, BSON, and UBJSON.
 195. [ArtemSarmini](https://github.com/ArtemSarmini) fixed a compilation issue with GCC 10 and fixed a leak.
-196. [Evgenii Sopov](https://github.com/sea5kg) integrated the library to the wsjcpp package manager.
+196. [Evgenii Sopov](https://github.com/sea-kg) integrated the library to the wsjcpp package manager.
 197. [Sergey Linev](https://github.com/linev) fixed a compiler warning.
 198. [Miguel Magalhães](https://github.com/magamig) fixed the year in the copyright.
 199. [Gareth Sylvester-Bradley](https://github.com/garethsb-sony) fixed a compilation issue with MSVC.
@@ -1720,7 +1697,7 @@ I deeply appreciate the help of the following people.
 287. [NN](https://github.com/NN---) added the Visual Studio output directory to `.gitignore`.
 288. [Romain Reignier](https://github.com/romainreignier) improved the performance of the vector output adapter.
 289. [Mike](https://github.com/Mike-Leo-Smith) fixed the `std::iterator_traits`.
-290. [Richard Hozák](https://github.com/richardhozak) added macro `JSON_NO_ENUM` to disable default enum conversions.
+290. [Richard Hozák](https://github.com/zxey) added macro `JSON_NO_ENUM` to disable default enum conversions.
 291. [vakokako](https://github.com/vakokako) fixed tests when compiling with C++20.
 292. [Alexander “weej” Jones](https://github.com/alexweej) fixed an example in the README.
 293. [Eli Schwartz](https://github.com/eli-schwartz) added more files to the `include.zip` archive.
@@ -1745,7 +1722,7 @@ I deeply appreciate the help of the following people.
 312. [Gareth Sylvester-Bradley](https://github.com/garethsb) added `operator/=` and `operator/` to construct JSON pointers.
 313. [Michael Macnair](https://github.com/mykter) added support for afl-fuzz testing.
 314. [Berkus Decker](https://github.com/berkus) fixed a typo in the README.
-315. [Illia Polishchuk](https://github.com/ilqvya) improved the CMake testing.
+315. [Illia Polishchuk](https://github.com/effolkronium) improved the CMake testing.
 316. [Ikko Ashimine](https://github.com/eltociear) fixed a typo.
 317. [Raphael Grimm](https://github.com/barcode) added the possibility to define a custom base class.
 318. [tocic](https://github.com/tocic) fixed typos in the documentation.
@@ -1815,66 +1792,6 @@ I deeply appreciate the help of the following people.
 382. [bitFiedler](https://github.com/bitFiedler) made GDB pretty printer work with Python 3.8.
 383. [Gianfranco Costamagna](https://github.com/LocutusOfBorg) fixed a compiler warning.
 384. [risa2000](https://github.com/risa2000) made `std::filesystem::path` conversion to/from UTF-8 encoded string explicit.
-385. [AM](https://github.com/maqnouch) fixed typos in the README.
-386. [dmenendez-gruposantander](https://github.com/dmenendez-gruposantander) fixed typos in the comments of the examples.
-387. [Mihai Stan](https://github.com/mstan-xx) fixed comparisons against the literal `0`.
-388. [Matt Gumbel](https://github.com/intelmatt) fixed some `-Weffc++` warnings.
-389. [vimpunk](https://github.com/vimpunk) moved a lambda out of an unevaluated context to support older compilers.
-390. [Chris Harris](https://github.com/cjh1) fixed the compilation with GCC 4.8.
-391. [Palmer Dabbelt](https://github.com/palmer-dabbelt) generated and installed a pkg-config file.
-392. [Gus Pozuelo](https://github.com/ap-viavi) made `ordered_map` compatible with GCC 5.5, Clang 3.6, and Xcode 9.
-393. [AK](https://github.com/Lioncky) fixed an MSVC build error caused by the `min`/`max` macros from `windows.h`.
-394. [Sergiu Deitsch](https://github.com/sergiud) provided a fallback for missing `char8_t` support.
-395. [Xiaochuan Ye](https://github.com/XueSongTap) fixed `from_msgpack` for `std::byte` input by specializing `std::char_traits`.
-396. [Ville Vesilehto](https://github.com/thevilledev) fixed an overflow in the BJData size calculation and rejected overflowing negative integers in CBOR.
-397. [NmPassTHFan](https://github.com/nmpassthf) replaced the deprecated `std::is_trivial` for C++26.
-398. [Chris Ever](https://github.com/chirsz-ever) added the `ignore_trailing_commas` parser option.
-399. [Kuan-Fu Wu](https://github.com/kfwu1999) fixed the example code for `json_pointer` initialization.
-400. [David Kilzer](https://github.com/ddkilzer) added a missing header to the input adapters.
-401. [Miko](https://github.com/mikomikotaishi) added proper C++20 module support, simplified the module API, and fixed missing exports.
-402. [hitgirl](https://github.com/hitgil) fixed the CMake configuration when cross-compiling.
-403. [Devon Thomas](https://github.com/ThomaDevOSU) mentioned the Artistic Style formatting in the contribution guidelines.
-404. [Erik Hu](https://github.com/Erikhu1) made Coveralls upload errors non-fatal in the CI.
-405. [co63oc](https://github.com/co63oc) fixed typos.
-406. [DmitriBogdanov](https://github.com/DmitriBogdanov) fixed broken package manager links in the documentation.
-407. [Bander](https://github.com/banderzhm) improved the MSVC compatibility of the C++ modules.
-408. [Andy Choi](https://github.com/ccpong) removed an unnecessary `template` keyword before `get` in the README and the documentation.
-409. [SamareshSingh](https://github.com/ssam18) fixed single-element brace initialization to copy/move instead of wrapping in an array, fixed the `WITH_DEFAULT` macros for `ordered_map`, and handled moved events in `serve_header.py`.
-410. [Aditya](https://github.com/Lumowhisp) improved the documentation of the documentation generation.
-411. [cheese1](https://github.com/cheese1) clarified the README.
-412. [KhloodElhossiny](https://github.com/khloodelhossiny) enabled `std::string_view` keys in `operator[]`.
-413. [Charles Cabergs](https://github.com/cacharle) fixed a `-Wtautological-constant-out-of-range-compare` warning.
-414. [EALePain](https://github.com/EALePain) made the `std::tuple` conversion work with reference types such as `std::tie`.
-415. [koala_oishi](https://github.com/chibi-dogs) fixed grammatical wording in the README.
-416. [riccardoori11](https://github.com/riccardoori11) fixed a typo in the documentation.
-417. [Swastik Bose](https://github.com/VasuBhakt) fixed the parent pointers after `update()` with `JSON_DIAGNOSTICS` and fixed the Doxygen autolinking of requirements.
-418. [trdesilva](https://github.com/trdesilva) added `front`, `pop_front`, and `push_front` to `json_pointer`.
-419. [Akhilesh Arora](https://github.com/akhilesharora) fixed an incomplete-type error with `ordered_json`.
-420. [Hariom Phulre](https://github.com/hariomphulre) fixed the C++20 modules compilation with GCC.
-421. [Kirill Lokotkov](https://github.com/RUSLoker) fixed printing `long double` values.
-422. [George Sedov](https://github.com/radistmorse) added the `NLOHMANN_DEFINE_TYPE_*_WITH_NAMES` macros.
-423. [Caillin Nugent](https://github.com/nugentcaillin) added the `NLOHMANN_JSON_SERIALIZE_ENUM_STRICT` macro.
-424. [Cosmin D.](https://github.com/drcosmin) fixed `std::filesystem::path` conversions and added an MSVC workaround for `std::unique_ptr`.
-425. [Paul Dreik](https://github.com/pauldreik) fixed a test relying on implementation-specific behavior.
-426. [Daniel Falk](https://github.com/daniel-falk) added missing copyright notices to the SBOM.
-427. [Federico Sfriso](https://github.com/federicosfriso05-dotcom) added support for constructing JSON values from C++20 range views.
-428. [Luke Banicevic](https://github.com/banaboi) fixed corrupt BSON output for lengths exceeding `INT32_MAX`, cleaned up the BSON writer, and improved the documentation.
-429. [Patrick Armstrong](https://github.com/Patrick10199) updated the CBOR references and the half-precision float assertions.
-430. [Yash Bavadiya](https://github.com/xevrion) added checks to all BSON reads.
-431. [hum4nBeing](https://github.com/hum4nBeing) fixed the overflow handling of high-precision numbers in UBJSON.
-432. [tomatotomata](https://github.com/tomatotomata) added checks for reading CBOR tagged subtypes.
-433. [YingqiDuan](https://github.com/YingqiDuan) documented the BSON interoperability.
-434. [KBS](https://github.com/youdie006) documented the standards compliance and the strictness of `parse()` and `operator>>`.
-435. [Petr Bělohlávek](https://github.com/petrbel) added Clang 21 and 22 to the CI.
-436. [Dmitry Rantovov](https://github.com/darkdi) fixed the placement of a CBOR documentation block.
-437. [ljcjclljc](https://github.com/ljcjclljc) fixed the comparison of large unsigned integers with signed integers.
-438. [Sahil Kamate](https://github.com/sahilkamate03) fixed the handling of CBOR tags 0-5 and 21-23.
-439. [Krishnanand G](https://github.com/Krishnanand-G) made the UBJSON writer reject `use_type` without `use_size`.
-440. [whn](https://github.com/Whning0513) documented the lenient BSON input handling and corrected the complexity of `to_bson`.
-441. [elix3r](https://github.com/22elix3r) fixed `update()` with `merge_objects` when merging a primitive into an object.
-442. [Avionic Harshit](https://github.com/avionicharshit-byte) made `diff()` linear when an array shrinks.
-443. [Qatadaha Bin Matloob](https://github.com/qatcod) fixed comparisons between integers and floats and fixed unparsable BJData output.
-444. [Wu Shuwen](https://github.com/dajiaohuang) removed an unused include.

 Thanks a lot for helping out! Please [let me know](mailto:mail@nlohmann.me) if I forgot someone.

@@ -1885,13 +1802,13 @@ The library itself consists of a single header file licensed under the MIT licen
 - [**amalgamate.py - Amalgamate C source and header files**](https://github.com/edlund/amalgamate) to create a single header file
 - [**American fuzzy lop**](https://lcamtuf.coredump.cx/afl/) for fuzz testing
 - [**AppVeyor**](https://www.appveyor.com) for [continuous integration](https://ci.appveyor.com/project/nlohmann/json) on Windows
- [**Artistic Style**](https://astyle.sourceforge.net) for automatic source code indentation
+- [**Artistic Style**](http://astyle.sourceforge.net) for automatic source code indentation
 - [**Clang**](https://clang.llvm.org) for compilation with code sanitizers
 - [**CMake**](https://cmake.org) for build automation
 - [**Codacy**](https://www.codacy.com) for further [code analysis](https://app.codacy.com/gh/nlohmann/json/dashboard)
 - [**Coveralls**](https://coveralls.io) to measure [code coverage](https://coveralls.io/github/nlohmann/json)
 - [**Coverity Scan**](https://scan.coverity.com) for [static analysis](https://scan.coverity.com/projects/nlohmann-json)
- [**cppcheck**](https://cppcheck.sourceforge.io) for static analysis
+- [**cppcheck**](http://cppcheck.sourceforge.net) for static analysis
 - [**doctest**](https://github.com/onqtam/doctest) for the unit tests
 - [**GitHub Changelog Generator**](https://github.com/skywinder/github-changelog-generator) to generate the [ChangeLog](https://github.com/nlohmann/json/blob/develop/ChangeLog.md)
 - [**Google Benchmark**](https://github.com/google/benchmark) to implement the benchmarks
@@ -1906,15 +1823,6 @@ The library itself consists of a single header file licensed under the MIT licen

 ## Notes

-### Standards compliance
-
-The library targets strict conformance with [RFC 8259](https://tools.ietf.org/html/rfc8259.html). Both the original [JSONTestSuite](https://github.com/nst/JSONTestSuite) and its updated revision are exercised in CI; their test data is downloaded from [`nlohmann/json_test_data`](https://github.com/nlohmann/json_test_data) at configure time rather than committed to this repository (see [`tests/src/unit-testsuites.cpp`](https://github.com/nlohmann/json/blob/develop/tests/src/unit-testsuites.cpp)):
-
- The updated revision runs all mandatory `y_` (must-accept) and `n_` (must-reject) cases through the strict [`parse()`](https://json.nlohmann.me/api/basic_json/parse/) entry point; the original suite runs its `n_` cases through `parse()` and its `y_` cases through [`operator>>`](https://json.nlohmann.me/api/operator_gtgt/).
- The `i_` (implementation-defined) cases are, by RFC 8259, free to be accepted *or* rejected, so "passing all `i_` cases" is not a meaningful conformance metric. The library makes deliberate, documented choices there: nesting depth is not artificially limited, a leading UTF-8 byte order mark is silently ignored, [Unicode noncharacters](https://www.unicode.org/faq/private_use.html#nonchar1) are forwarded unchanged, invalid UTF-8 and lone/unpaired UTF-16 surrogates are rejected (stricter than required), and a number that cannot be stored without becoming `NaN`/`INF` raises [`out_of_range.406`](https://json.nlohmann.me/home/exceptions/#jsonexceptionout_of_range406).
-
-One behavioral nuance is worth calling out, because a superficial test often misreads it as non-compliance: [`parse()`](https://json.nlohmann.me/api/basic_json/parse/) is strict and rejects trailing data after a value, whereas [`operator>>`](https://json.nlohmann.me/api/operator_gtgt/) follows relaxed iostream semantics — it parses a single value and leaves the stream positioned right after it. Feeding "a valid document followed by trailing bytes" through `operator>>` reports success; the same input through `parse()` is rejected. This is a documented two-API design, not a conformance gap. See [**parsing**](https://json.nlohmann.me/features/parsing/) for details.
-
 ### Character encoding

 The library supports **Unicode input** as follows:
@@ -213,38 +213,18 @@ add_custom_target(ci_test_legacycomparison
 )

 ###############################################################################
-# Validate UTF-8 with simdutf.
+# Enable brace-init copy semantics.
 ###############################################################################

-add_custom_target(ci_test_simdutf
+add_custom_target(ci_test_brace_init_copy_semantics
    COMMAND ${CMAKE_COMMAND}
    -DCMAKE_BUILD_TYPE=Debug -GNinja
-    -DJSON_BuildTests=ON -DJSON_TestSimdutf=ON
-    # simdutf needs C++17, so the library falls back to its scalar validator
-    # below that: build the suite at C++11 to cover the fallback with the macro
-    # defined, and at C++17 to run every test against simdutf itself
-    "-DJSON_TestStandards=11\;17"
-    -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_simdutf
-    COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_simdutf
-    COMMAND cd ${PROJECT_BINARY_DIR}/build_simdutf && ${CMAKE_CTEST_COMMAND} --parallel ${N} --output-on-failure
-    COMMENT "Compile and test with simdutf UTF-8 validation enabled"
-)
-
-###############################################################################
-# Enable strict NUL-byte handling.
-###############################################################################
-
-add_custom_target(ci_test_strict_nul_handling
-    COMMAND ${CMAKE_COMMAND}
-    -DCMAKE_BUILD_TYPE=Debug -GNinja
-    -DJSON_BuildTests=ON -DJSON_FastTests=ON -DJSON_StrictNulHandling=ON
-    -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_strict_nul_handling
-    COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_strict_nul_handling
-    # unit-testsuites contains a fixture (a "1e308" test value) that relies on the
-    # legacy NUL-as-end-of-input behavior this macro disables; exclude it here, as
-    # it is expected to fail under strict NUL handling and is out of scope for it
-    COMMAND cd ${PROJECT_BINARY_DIR}/build_strict_nul_handling && ${CMAKE_CTEST_COMMAND} --parallel ${N} --output-on-failure -E "test-testsuites"
-    COMMENT "Compile and test with strict NUL-byte handling enabled"
+    -DJSON_BuildTests=ON -DJSON_FastTests=ON
+    -DCMAKE_CXX_FLAGS=-DJSON_BRACE_INIT_COPY_SEMANTICS=1
+    -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_brace_init_copy_semantics
+    COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_brace_init_copy_semantics
+    COMMAND cd ${PROJECT_BINARY_DIR}/build_brace_init_copy_semantics && ${CMAKE_CTEST_COMMAND} --parallel ${N} --output-on-failure
+    COMMENT "Compile and test with brace-init copy semantics enabled"
 )

 ###############################################################################
@@ -262,59 +242,6 @@ add_custom_target(ci_test_noglobaludls
    COMMENT "Compile and test with global UDLs disabled"
 )

-###############################################################################
-# Disable enum serialization.
-###############################################################################
-
-add_custom_target(ci_test_disableenumserialization
-    COMMAND ${CMAKE_COMMAND}
-    -DCMAKE_BUILD_TYPE=Debug -GNinja
-    -DJSON_BuildTests=ON -DJSON_FastTests=ON -DJSON_DisableEnumSerialization=ON
-    -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_disableenumserialization
-    COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_disableenumserialization
-    COMMAND cd ${PROJECT_BINARY_DIR}/build_disableenumserialization && ${CMAKE_CTEST_COMMAND} --parallel ${N} --output-on-failure
-    COMMENT "Compile and test with enum serialization disabled"
-)
-
-###############################################################################
-# Skip the multiple-inclusion library version check.
-###############################################################################
-
-# tests/src/skip_library_version_check.cpp deliberately simulates a scenario
-# (mixing two differently-versioned inclusions of the library in one
-# translation unit) that unavoidably triggers the compiler's own "macro
-# redefined" warning, so -- unlike the ci_test_* targets above -- it is
-# compiled directly here, with a modest warning set, instead of being folded
-# into the library's own -Weverything/-Werror unit test matrix.
-add_custom_target(ci_test_skiplibraryversioncheck
-    COMMAND ${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/skip_library_version_check
-    COMMAND ${CMAKE_CXX_COMPILER} -std=c++11 -Wall -Wextra
-        -I${PROJECT_SOURCE_DIR}/include
-        ${PROJECT_SOURCE_DIR}/tests/src/skip_library_version_check.cpp
-        -o ${PROJECT_BINARY_DIR}/skip_library_version_check/skip_library_version_check
-    COMMAND ${PROJECT_BINARY_DIR}/skip_library_version_check/skip_library_version_check
-    COMMENT "Compile and run a translation unit simulating a mismatched library version, with JSON_SKIP_LIBRARY_VERSION_CHECK defined"
-)
-
-###############################################################################
-# Disable thread-local storage.
-###############################################################################
-
-# Without thread-local storage, copying and comparing cannot bound their
-# descent and handle every object and array without the call stack. Those paths
-# are otherwise only reached by values nested deeper than the bound, so this
-# target is what runs the whole test suite through them.
-add_custom_target(ci_test_no_thread_local
-    COMMAND ${CMAKE_COMMAND}
-    -DCMAKE_BUILD_TYPE=Debug -GNinja
-    -DJSON_BuildTests=ON
-    -DCMAKE_CXX_FLAGS=-DJSON_NO_THREAD_LOCAL
-    -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_no_thread_local
-    COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_no_thread_local
-    COMMAND cd ${PROJECT_BINARY_DIR}/build_no_thread_local && ${CMAKE_CTEST_COMMAND} --parallel ${N} --output-on-failure
-    COMMENT "Compile and test without thread-local storage"
-)
-
 ###############################################################################
 # Coverage.
 ###############################################################################
@@ -367,16 +294,15 @@ file(GLOB_RECURSE INDENT_FILES
        ${PROJECT_SOURCE_DIR}/tests/src/*.cpp
        ${PROJECT_SOURCE_DIR}/tests/src/*.hpp
        ${PROJECT_SOURCE_DIR}/tests/benchmarks/src/benchmarks.cpp
-    ${PROJECT_SOURCE_DIR}/docs/mkdocs/docs/examples/*.cpp
+    ${PROJECT_SOURCE_DIR}/docs/examples/*.cpp
 )

 set(include_dir ${PROJECT_SOURCE_DIR}/single_include/nlohmann)
 set(tool_dir ${PROJECT_SOURCE_DIR}/tools/amalgamate)
 add_custom_target(ci_test_amalgamation
-    COMMAND rm -fr ${include_dir}/json.hpp~ ${include_dir}/json_fwd.hpp~ ${include_dir}/json_view.hpp~
+    COMMAND rm -fr ${include_dir}/json.hpp~ ${include_dir}/json_fwd.hpp~
    COMMAND cp ${include_dir}/json.hpp ${include_dir}/json.hpp~
    COMMAND cp ${include_dir}/json_fwd.hpp ${include_dir}/json_fwd.hpp~
-    COMMAND cp ${include_dir}/json_view.hpp ${include_dir}/json_view.hpp~

    COMMAND ${Python3_EXECUTABLE} -mvenv venv_astyle
    COMMAND venv_astyle/bin/pip3 --quiet install -r ${CMAKE_SOURCE_DIR}/tools/astyle/requirements.txt
@@ -384,12 +310,10 @@ add_custom_target(ci_test_amalgamation

    COMMAND ${Python3_EXECUTABLE} ${tool_dir}/amalgamate.py -c ${tool_dir}/config_json.json -s .
    COMMAND ${Python3_EXECUTABLE} ${tool_dir}/amalgamate.py -c ${tool_dir}/config_json_fwd.json -s .
-    COMMAND ${Python3_EXECUTABLE} ${tool_dir}/amalgamate.py -c ${tool_dir}/config_json_view.json -s .
-    COMMAND venv_astyle/bin/astyle --project=tools/astyle/.astylerc --suffix=none ${include_dir}/json.hpp ${include_dir}/json_fwd.hpp ${include_dir}/json_view.hpp
+    COMMAND venv_astyle/bin/astyle --project=tools/astyle/.astylerc --suffix=none ${include_dir}/json.hpp ${include_dir}/json_fwd.hpp

    COMMAND diff ${include_dir}/json.hpp~ ${include_dir}/json.hpp
    COMMAND diff ${include_dir}/json_fwd.hpp~ ${include_dir}/json_fwd.hpp
-    COMMAND diff ${include_dir}/json_view.hpp~ ${include_dir}/json_view.hpp

    COMMAND venv_astyle/bin/astyle --project=tools/astyle/.astylerc --suffix=orig ${INDENT_FILES}
    COMMAND for FILE in `find . -name '*.orig'`\; do false \; done
@@ -545,7 +469,7 @@ add_custom_target(ci_infer

 add_custom_target(ci_offline_testdata
    COMMAND mkdir -p ${PROJECT_BINARY_DIR}/build_offline_testdata/test_data
-    COMMAND cd ${PROJECT_BINARY_DIR}/build_offline_testdata/test_data && ${GIT_TOOL} clone -c advice.detachedHead=false --branch v3.2.0 https://github.com/nlohmann/json_test_data.git --quiet --depth 1
+    COMMAND cd ${PROJECT_BINARY_DIR}/build_offline_testdata/test_data && ${GIT_TOOL} clone -c advice.detachedHead=false --branch v3.1.0 https://github.com/nlohmann/json_test_data.git --quiet --depth 1
    COMMAND ${CMAKE_COMMAND}
        -DCMAKE_BUILD_TYPE=Debug -GNinja
        -DJSON_BuildTests=ON -DJSON_FastTests=ON -DJSON_TestDataDirectory=${PROJECT_BINARY_DIR}/build_offline_testdata/test_data/json_test_data
@@ -622,7 +546,7 @@ add_custom_target(ci_single_binaries
 add_custom_target(ci_benchmarks
    COMMAND ${CMAKE_COMMAND}
        -DCMAKE_BUILD_TYPE=Release -GNinja
-        -S${PROJECT_SOURCE_DIR}/tests/benchmarks -B${PROJECT_BINARY_DIR}/build_benchmarks
+        -S${PROJECT_SOURCE_DIR}/benchmarks -B${PROJECT_BINARY_DIR}/build_benchmarks
    COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_benchmarks --target json_benchmarks
    COMMAND cd ${PROJECT_BINARY_DIR}/build_benchmarks && ./json_benchmarks
    COMMENT "Run benchmarks"
@@ -5,9 +5,6 @@
 # -Wno-extra-semi-stmt            The library uses assert which triggers this warning.
 # -Wno-padded                     We do not care about padding warnings.
 # -Wno-covered-switch-default     All switches list all cases and a default case.
-# -Wno-c2y-extensions             Clang 22.1 diagnoses __COUNTER__ as a C2y extension, also in
-#                                 C++ mode. The library does not use __COUNTER__; the warnings
-#                                 all come from vendored Doctest (SECTION/TEST_CASE macros).
 # -Wno-unsafe-buffer-usage        Pervasive: the library's own low-level numeric/buffer code
 #                                 (to_chars, serializer, lexer, binary reader/writer, input
 #                                 adapters, json_pointer) plus vendored Doctest itself (~208
@@ -23,6 +20,5 @@ set(CLANG_CXXFLAGS
    -Wno-extra-semi-stmt
    -Wno-padded
    -Wno-covered-switch-default
-    -Wno-c2y-extensions
    -Wno-unsafe-buffer-usage
 )
@@ -1,5 +1,5 @@
 set(JSON_TEST_DATA_URL     https://github.com/nlohmann/json_test_data)
-set(JSON_TEST_DATA_VERSION 3.2.0)
+set(JSON_TEST_DATA_VERSION 3.1.0)

 include(ExternalProject)

@@ -77,7 +77,7 @@ if(CMAKE_CROSSCOMPILING)
 endif()
 if(NOT DEFINED LIBCPP_VERSION_OUTPUT_CACHED)
    try_run(RUN_RESULT_VAR COMPILE_RESULT_VAR
-        "${CMAKE_BINARY_DIR}" SOURCES "${CMAKE_CURRENT_LIST_DIR}/detect_libcpp_version.cpp"
+        "${CMAKE_BINARY_DIR}" SOURCES "${CMAKE_SOURCE_DIR}/cmake/detect_libcpp_version.cpp"
        RUN_OUTPUT_VARIABLE LIBCPP_VERSION_OUTPUT
        COMPILE_OUTPUT_VARIABLE LIBCPP_VERSION_COMPILE_OUTPUT
    )
@@ -1,58 +1,24 @@
 # generate Bazel BUILD file
-#
-# usage: cmake -P cmake/scripts/gen_bazel_build_file.cmake (or: make BUILD.bazel)
-#
-# The header list of the "json" target is derived from the files in include/. Everything else is fixed text below,
-# so edit this script rather than BUILD.bazel.

-get_filename_component(PROJECT_ROOT "${CMAKE_CURRENT_LIST_DIR}/../.." ABSOLUTE)
+set(PROJECT_ROOT "${CMAKE_CURRENT_LIST_DIR}/../..")
 set(BUILD_FILE "${PROJECT_ROOT}/BUILD.bazel")

-file(GLOB_RECURSE HEADERS LIST_DIRECTORIES false RELATIVE "${PROJECT_ROOT}" "${PROJECT_ROOT}/include/*.hpp")
-list(SORT HEADERS)
-
-set(CONTENT [=[
-load("@rules_cc//cc:cc_library.bzl", "cc_library")
-load("@rules_license//rules:license.bzl", "license")
-
-package(
-    default_applicable_licenses = [":license"],
-)
-
-exports_files([
-    "LICENSE.MIT",
-])
-
-license(
-    name = "license",
-    license_kinds = ["@rules_license//licenses/spdx:MIT"],
-    license_text = "LICENSE.MIT",
-)
+file(GLOB_RECURSE HEADERS LIST_DIRECTORIES false RELATIVE "${PROJECT_ROOT}" "include/*.hpp")

+file(WRITE "${BUILD_FILE}" [=[
 cc_library(
    name = "json",
    hdrs = [
 ]=])

 foreach(header ${HEADERS})
-    string(APPEND CONTENT "        \"${header}\",\n")
+    file(APPEND "${BUILD_FILE}" "        \"${header}\",\n")
 endforeach()

-string(APPEND CONTENT [=[
+file(APPEND "${BUILD_FILE}" [=[
    ],
    includes = ["include"],
    visibility = ["//visibility:public"],
-)
-
-cc_library(
-    name = "singleheader-json",
-    hdrs = [
-        "single_include/nlohmann/json.hpp",
-        "single_include/nlohmann/json_view.hpp",
-    ],
-    includes = ["single_include"],
-    visibility = ["//visibility:public"],
+    alwayslink = True,
 )
 ]=])
-
-file(WRITE "${BUILD_FILE}" "${CONTENT}")
@@ -1,112 +0,0 @@
-# Shared extractor for the JSON_HEDLEY_* macro names defined in hedley.hpp.
-#
-# Every macro that hedley.hpp #defines must be #undef-ed again once json.hpp
-# has been fully processed (see include/nlohmann/detail/macro_unscope.hpp
-# and https://github.com/nlohmann/json/issues/5408). Deriving the macro list
-# straight from hedley.hpp here -- instead of hand-maintaining it in two
-# places -- means hedley_undef.hpp and the regression test that checks for
-# leaked macros can never drift apart, even after a future `make
-# update_hedley` pulls in new macros from upstream Hedley.
-#
-#   MODE=undef  (default): write hedley_undef.hpp (SPDX header, #pragma once,
-#               one #undef per macro name) -- used by `make update_hedley_undef`
-#   MODE=checks:            write one #ifdef/FAIL_CHECK/#endif per macro name,
-#               meant to be #include-d inside a TEST_CASE -- used by
-#               tests/CMakeLists.txt to (re)generate the include for
-#               tests/src/unit-no-macro-leak.cpp
-#
-# Required variables:
-#   HEDLEY_HPP  path to include/nlohmann/thirdparty/hedley/hedley.hpp
-#   OUTPUT      path of the file to (over)write
-# Optional:
-#   MODE        "undef" (default) or "checks"
-
-if(NOT DEFINED HEDLEY_HPP OR NOT DEFINED OUTPUT)
-    message(FATAL_ERROR "HEDLEY_HPP and OUTPUT must be set")
-endif()
-
-if(NOT EXISTS "${HEDLEY_HPP}")
-    message(FATAL_ERROR "Hedley header not found: ${HEDLEY_HPP}")
-endif()
-
-if(NOT DEFINED MODE)
-    set(MODE undef)
-endif()
-
-if(NOT MODE STREQUAL "undef" AND NOT MODE STREQUAL "checks")
-    message(FATAL_ERROR "MODE must be undef or checks, got: ${MODE}")
-endif()
-
-# Line-anchored, like `grep -oE "^[[:blank:]]*#[[:blank:]]*define[[:blank:]]+JSON_HEDLEY_[A-Za-z0-9_]+"`.
-# Unanchored matching would also pick up JSON_HEDLEY_* mentions inside
-# comments or string literals elsewhere in the file, which must not turn
-# into #undef lines.
-file(STRINGS "${HEDLEY_HPP}" hedley_lines)
-set(macro_names)
-foreach(line IN LISTS hedley_lines)
-    if("${line}" MATCHES "^[ \t]*#[ \t]*define[ \t]+(JSON_HEDLEY_[A-Za-z0-9_]+)")
-        list(APPEND macro_names "${CMAKE_MATCH_1}")
-    endif()
-endforeach()
-
-if(NOT macro_names)
-    message(FATAL_ERROR "No JSON_HEDLEY_* macros found in ${HEDLEY_HPP}")
-endif()
-
-list(REMOVE_DUPLICATES macro_names)
-# Lexicographic, locale-independent (ASCII-only names) -- matches `LC_ALL=C sort`.
-list(SORT macro_names COMPARE STRING)
-list(LENGTH macro_names macro_count)
-
-set(generated "")
-if(MODE STREQUAL "undef")
-    # Same banner `make update_hedley_undef` would stamp by hand, so the
-    # recipe is self-contained and its output is byte-stable across reruns.
-    # The embedded SPDX tags below are part of the *generated* file's
-    # content, not a REUSE header for this .cmake script itself (which is
-    # already covered by the blanket "Files: *" rule in .reuse/dep5) -- keep
-    # them wrapped in REUSE-IgnoreStart/End so `reuse lint` does not try to
-    # parse "MIT\n")" as this file's own SPDX-License-Identifier value.
-    # REUSE-IgnoreStart
-    string(APPEND generated "//     __ _____ _____ _____\n")
-    string(APPEND generated "//  __|  |   __|     |   | |  JSON for Modern C++\n")
-    string(APPEND generated "// |  |  |__   |  |  | | | |  version 3.12.0\n")
-    string(APPEND generated "// |_____|_____|_____|_|___|  https://github.com/nlohmann/json\n")
-    string(APPEND generated "//\n")
-    string(APPEND generated "// SPDX-FileCopyrightText: 2013-2026 Niels Lohmann <https://nlohmann.me>\n")
-    string(APPEND generated "// SPDX-License-Identifier: MIT\n")
-    # REUSE-IgnoreEnd
-    string(APPEND generated "\n")
-    string(APPEND generated "#pragma once\n")
-    string(APPEND generated "\n")
-    foreach(name IN LISTS macro_names)
-        string(APPEND generated "#undef ${name}\n")
-    endforeach()
-else()
-    string(APPEND generated "// This file is generated by cmake/scripts/gen_hedley_undef_check.cmake\n")
-    string(APPEND generated "// from include/nlohmann/thirdparty/hedley/hedley.hpp. Do not edit it by\n")
-    string(APPEND generated "// hand -- it is regenerated on every build. ${macro_count} macros checked.\n\n")
-    foreach(name IN LISTS macro_names)
-        string(APPEND generated "#ifdef ${name}\n")
-        string(APPEND generated "    FAIL_CHECK(\"${name} leaked after including nlohmann/json.hpp\");\n")
-        string(APPEND generated "#endif\n")
-    endforeach()
-endif()
-
-get_filename_component(output_dir "${OUTPUT}" DIRECTORY)
-if(output_dir)
-    file(MAKE_DIRECTORY "${output_dir}")
-endif()
-
-# Avoid rewriting the file (and busting downstream incremental rebuilds)
-# when the content has not actually changed.
-set(write_output TRUE)
-if(EXISTS "${OUTPUT}")
-    file(READ "${OUTPUT}" existing_content)
-    if(existing_content STREQUAL generated)
-        set(write_output FALSE)
-    endif()
-endif()
-if(write_output)
-    file(WRITE "${OUTPUT}" "${generated}")
-endif()
@@ -48,7 +48,6 @@ INSERT INTO searchIndex(name, type, path) VALUES ('basic_json::from_bjdata', 'Fu
 INSERT INTO searchIndex(name, type, path) VALUES ('basic_json::from_bson', 'Function', 'api/basic_json/from_bson/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('basic_json::from_cbor', 'Function', 'api/basic_json/from_cbor/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('basic_json::from_msgpack', 'Function', 'api/basic_json/from_msgpack/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json::from_bon8', 'Function', 'api/basic_json/from_bon8/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('basic_json::from_ubjson', 'Function', 'api/basic_json/from_ubjson/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('basic_json::front', 'Method', 'api/basic_json/front/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('basic_json::get', 'Method', 'api/basic_json/get/index.html');
@@ -122,72 +121,12 @@ INSERT INTO searchIndex(name, type, path) VALUES ('basic_json::to_bjdata', 'Func
 INSERT INTO searchIndex(name, type, path) VALUES ('basic_json::to_bson', 'Function', 'api/basic_json/to_bson/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('basic_json::to_cbor', 'Function', 'api/basic_json/to_cbor/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('basic_json::to_msgpack', 'Function', 'api/basic_json/to_msgpack/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json::to_bon8', 'Function', 'api/basic_json/to_bon8/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('basic_json::to_string', 'Method', 'api/basic_json/to_string/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('basic_json::to_ubjson', 'Function', 'api/basic_json/to_ubjson/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('basic_json::value', 'Method', 'api/basic_json/value/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('basic_json::value_t', 'Enum', 'api/basic_json/value_t/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('basic_json::~basic_json', 'Method', 'api/basic_json/~basic_json/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_document', 'Class', 'api/basic_json_document/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_document::basic_json_document', 'Constructor', 'api/basic_json_document/basic_json_document/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_document::accept', 'Function', 'api/basic_json_document/accept/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_document::is_discarded', 'Method', 'api/basic_json_document/is_discarded/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_document::memory_usage', 'Method', 'api/basic_json_document/memory_usage/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_document::node_count', 'Method', 'api/basic_json_document/node_count/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_document::owns_source', 'Method', 'api/basic_json_document/owns_source/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_document::parse', 'Function', 'api/basic_json_document/parse/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_document::parse_copy', 'Function', 'api/basic_json_document/parse_copy/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_document::read', 'Method', 'api/basic_json_document/read/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_document::root', 'Method', 'api/basic_json_document/root/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_document::shrink_to_fit', 'Method', 'api/basic_json_document/shrink_to_fit/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_document::source', 'Method', 'api/basic_json_document/source/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view', 'Class', 'api/basic_json_view/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::basic_json_view', 'Constructor', 'api/basic_json_view/basic_json_view/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::at', 'Method', 'api/basic_json_view/at/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::back', 'Method', 'api/basic_json_view/back/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::begin', 'Method', 'api/basic_json_view/begin/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::cbegin', 'Method', 'api/basic_json_view/cbegin/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::cend', 'Method', 'api/basic_json_view/cend/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::contains', 'Method', 'api/basic_json_view/contains/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::count', 'Method', 'api/basic_json_view/count/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::dump', 'Method', 'api/basic_json_view/dump/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::empty', 'Method', 'api/basic_json_view/empty/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::end', 'Method', 'api/basic_json_view/end/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::find', 'Method', 'api/basic_json_view/find/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::front', 'Method', 'api/basic_json_view/front/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::get', 'Method', 'api/basic_json_view/get/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::get_string', 'Method', 'api/basic_json_view/get_string/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::get_to', 'Method', 'api/basic_json_view/get_to/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::is_array', 'Method', 'api/basic_json_view/is_array/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::is_binary', 'Method', 'api/basic_json_view/is_binary/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::is_boolean', 'Method', 'api/basic_json_view/is_boolean/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::is_discarded', 'Method', 'api/basic_json_view/is_discarded/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::is_null', 'Method', 'api/basic_json_view/is_null/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::is_number', 'Method', 'api/basic_json_view/is_number/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::is_number_float', 'Method', 'api/basic_json_view/is_number_float/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::is_number_integer', 'Method', 'api/basic_json_view/is_number_integer/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::is_number_unsigned', 'Method', 'api/basic_json_view/is_number_unsigned/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::is_object', 'Method', 'api/basic_json_view/is_object/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::is_primitive', 'Method', 'api/basic_json_view/is_primitive/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::is_string', 'Method', 'api/basic_json_view/is_string/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::is_structured', 'Method', 'api/basic_json_view/is_structured/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::items', 'Method', 'api/basic_json_view/items/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::materialize', 'Method', 'api/basic_json_view/materialize/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::number_format', 'Enum', 'api/basic_json_view/number_format/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::number_token', 'Method', 'api/basic_json_view/number_token/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::operator bool', 'Method', 'api/basic_json_view/operator_bool/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::operator<<', 'Operator', 'api/basic_json_view/operator_ltlt/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::operator[]', 'Operator', 'api/basic_json_view/operator[]/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::operator==', 'Operator', 'api/basic_json_view/operator_eq/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::operator!=', 'Operator', 'api/basic_json_view/operator_ne/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::size', 'Method', 'api/basic_json_view/size/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::source_offset', 'Method', 'api/basic_json_view/source_offset/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::type', 'Method', 'api/basic_json_view/type/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::type_name', 'Method', 'api/basic_json_view/type_name/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('basic_json_view::value', 'Method', 'api/basic_json_view/value/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('json', 'Class', 'api/json/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('json_document', 'Class', 'api/json_document/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('json_view', 'Class', 'api/json_view/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('json_pointer', 'Class', 'api/json_pointer/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('json_pointer::back', 'Method', 'api/json_pointer/back/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('json_pointer::empty', 'Method', 'api/json_pointer/empty/index.html');
@@ -221,8 +160,6 @@ INSERT INTO searchIndex(name, type, path) VALUES ('operator""_json_pointer', 'Li
 INSERT INTO searchIndex(name, type, path) VALUES ('operator<<', 'Operator', 'api/operator_ltlt/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('operator>>', 'Operator', 'api/operator_gtgt/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('ordered_json', 'Class', 'api/ordered_json/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('ordered_json_document', 'Class', 'api/ordered_json_document/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('ordered_json_view', 'Class', 'api/ordered_json_view/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('ordered_map', 'Class', 'api/ordered_map/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('std::hash<basic_json>', 'Class', 'api/basic_json/std_hash/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('std::swap<basic_json>', 'Function', 'api/basic_json/std_swap/index.html');
@@ -234,7 +171,6 @@ INSERT INTO searchIndex(name, type, path) VALUES ('Binary Formats: BJData', 'Gui
 INSERT INTO searchIndex(name, type, path) VALUES ('Binary Formats: BSON', 'Guide', 'features/binary_formats/bson/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('Binary Formats: CBOR', 'Guide', 'features/binary_formats/cbor/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('Binary Formats: MessagePack', 'Guide', 'features/binary_formats/messagepack/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('Binary Formats: BON8', 'Guide', 'features/binary_formats/bon8/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('Binary Formats: UBJSON', 'Guide', 'features/binary_formats/ubjson/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('Binary Values', 'Guide', 'features/binary_values/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('Comments', 'Guide', 'features/comments/index.html');
@@ -252,7 +188,6 @@ INSERT INTO searchIndex(name, type, path) VALUES ('Iterators', 'Guide', 'feature
 INSERT INTO searchIndex(name, type, path) VALUES ('JSON Merge Patch', 'Guide', 'features/merge_patch/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('JSON Patch and Diff', 'Guide', 'features/json_patch/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('JSON Pointer', 'Guide', 'features/json_pointer/index.html');
-INSERT INTO searchIndex(name, type, path) VALUES ('Zero-copy JSON views', 'Guide', 'features/json_view/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('nlohmann Namespace', 'Guide', 'features/namespace/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('Types', 'Guide', 'features/types/index.html');
 INSERT INTO searchIndex(name, type, path) VALUES ('Types: Number Handling', 'Guide', 'features/types/number_handling/index.html');
@@ -90,10 +90,6 @@ Linear in the length of the input. The parser is a predictive LL(1) parser.

 A UTF-8 byte order mark is silently ignored.

-By default, a `'\0'` (NUL) byte anywhere in the input is treated as end of input, rather than as an ordinary (and,
-outside of a string, invalid) byte; see the [FAQ entry](../../home/faq.md#nul-bytes-in-the-input) for details and the
-[`JSON_STRICT_NUL_HANDLING`](../macros/json_strict_nul_handling.md) macro to opt into rejecting it instead.
-
 ## Examples

 ??? example
@@ -115,8 +111,6 @@ outside of a string, invalid) byte; see the [FAQ entry](../../home/faq.md#nul-by
 - [parse](parse.md) - deserialize from a compatible input
 - [sax_parse](sax_parse.md) - parse input using the SAX interface
 - [operator>>](../operator_gtgt.md) - deserialize from stream
- [`JSON_STRICT_NUL_HANDLING`](../macros/json_strict_nul_handling.md) - opt in to rejecting a NUL byte in the input
-  instead of treating it as end of input

 ## Version history

@@ -126,8 +120,6 @@ outside of a string, invalid) byte; see the [FAQ entry](../../home/faq.md#nul-by
 - Added `ignore_trailing_commas` in version 3.13.0.
 - Extended container support (1) to include types with lvalue-only ADL `begin`/`end` (matching `std::begin`/`std::end` semantics) in version 3.13.0.
 - Extended overload (2) to accept heterogeneous iterator+sentinel pairs (C++20 ranges support) in version 3.13.0.
- `JSON_STRICT_NUL_HANDLING` added in version 3.13.0 to optionally reject a NUL byte in the input instead of treating
-  it as end of input; planned to become the default in version 4.0.0.

 !!! warning "Deprecation"

@@ -14,11 +14,7 @@ To store objects in C++, a type is defined by the template parameters explained
 ## Template parameters

 `ArrayType`
-:   container type to store arrays. It must be a vector-like container: the library uses `operator[]`, `at()`, and
-    `resize()`, and requires random-access iterators. `#!cpp std::vector` and `#!cpp std::deque` qualify;
-    `#!cpp std::list` does not. See
-    [Template Parameter Requirements](../../features/types/template_parameters.md#arraytype) for the full list of
-    requirements.
+:   container type to store arrays (e.g., `std::vector` or `std::list`)

 `AllocatorType`
 :   the allocator to use for objects (e.g., `std::allocator`)
@@ -70,4 +66,3 @@ Arrays are stored as pointers in a `basic_json` type. That is, for any access to
 ## Version history

 - Added in version 1.0.0.
- Made `capacity()` optional, so that array types such as `#!cpp std::deque` can be used, in version 3.13.0.
@@ -219,7 +219,6 @@ Strong exception safety: if an exception occurs, the original value stays intact
 - documentation on [checked access](../../features/element_access/checked_access.md)
 - [`operator[]`](operator%5B%5D.md) for unchecked access by reference
 - [`value`](value.md) for access with default value
- [basic_json_view::at](../basic_json_view/at.md) - the same access on a zero-copy view

 ## Version history

@@ -58,7 +58,6 @@ Constant.
 ## See also

 - [front](front.md) to access the first element
- [basic_json_view::back](../basic_json_view/back.md) - the same access on a zero-copy view

 ## Version history

@@ -37,12 +37,6 @@ Constant.
    --8<-- "examples/begin.output"
    ```

-## See also
-
- [end](end.md) - returns an iterator to one past the last element
- [basic_json_view::begin](../basic_json_view/begin.md) - the same iteration on a zero-copy view (in document order,
-  not sorted by key)
-
 ## Version history

 - Added in version 1.0.0.
@@ -13,8 +13,9 @@ is compatible with both of the binary data formats that use binary subtyping, (t
 incompatible with each other, and it is up to the user to translate between them). The subtype is added to `BinaryType`
 via the helper type [byte_container_with_subtype](../byte_container_with_subtype/index.md).

-[CBOR's RFC 8949](https://www.rfc-editor.org/rfc/rfc8949.html#section-3.1) describes this type as:
-> Major type 2: A byte string. The number of bytes in the string is equal to the argument.
+[CBOR's RFC 7049](https://tools.ietf.org/html/rfc7049) describes this type as:
+> Major type 2: a byte string. The string's length in bytes is represented following the rules for positive integers
+> (major type 0).

 [MessagePack's documentation on the bin type
 family](https://github.com/msgpack/msgpack/blob/master/spec.md#bin-format-family) describes this type as:
@@ -42,9 +43,7 @@ represent a byte array in modern C++.
    `value_type` must additionally be exactly one byte wide (e.g., `std::uint8_t`/`char`/`std::byte`): the binary
    serializers (CBOR, MessagePack, BSON, UBJSON) read and write the container's raw bytes via
    `reinterpret_cast`, which is only correct for byte-sized elements -- a container like
-    `#!cpp std::vector<std::intptr_t>` will not work as `BinaryType`. The elements must be stored contiguously, and
-    the binary readers additionally require `resize()` and `operator[]`. See
-    [Template Parameter Requirements](../../features/types/template_parameters.md#binarytype) for the full list.
+    `#!cpp std::vector<std::intptr_t>` will not work as `BinaryType`.

 ## Notes

@@ -52,43 +51,6 @@ represent a byte array in modern C++.

 The default values for `BinaryType` is `#!cpp std::vector<std::uint8_t>`.

-#### Supported byte types
-
-`#!cpp std::vector<std::uint8_t>`, `#!cpp std::vector<char>`, and `#!cpp std::vector<std::byte>` are supported.
-Regardless of which of them is configured, [`dump`](dump.md) writes the bytes as the numbers 0..255.
-
-#### Custom BinaryType behavior
-
-When a custom `BinaryType` is configured (other than the default `#!cpp std::vector<std::uint8_t>`), you can assign
-values of that type directly to a `basic_json` instance, and they will automatically be recognized as binary values
-rather than arrays:
-
-```cpp
-using custom_json = nlohmann::basic_json<
-    nlohmann::ordered_map,  // ObjectType
-    std::vector,            // ArrayType
-    std::string,            // StringType
-    bool,                   // BooleanType
-    std::int64_t,           // NumberIntegerType
-    std::uint64_t,          // NumberUnsignedType
-    double,                 // NumberFloatType
-    std::allocator,         // AllocatorType
-    nlohmann::adl_serializer,
-    std::vector<std::byte>  // Custom BinaryType
->;
-
-std::vector<std::byte> data{std::byte{1}, std::byte{2}, std::byte{3}};
-custom_json j = data;  // Creates a binary value, not an array
-assert(j.is_binary());
-
-// Round-tripping works seamlessly
-auto extracted = j.get<std::vector<std::byte>>();
-assert(extracted == data);
-```
-
-This automatic type detection is a convenience feature that only applies to custom (non-default) `BinaryType` configurations.
-The default `nlohmann::json` continues to treat `#!cpp std::vector<std::uint8_t>` as arrays for backward compatibility.
-
 #### Storage

 Binary Arrays are stored as pointers in a `basic_json` type. That is, for any access to array values, a pointer of the
@@ -133,6 +95,3 @@ type `#!cpp binary_t*` must be dereferenced.
 ## Version history

 - Added in version 3.8.0. Changed the type of subtype to `std::uint64_t` in version 3.10.0.
- Fixed [`dump`](dump.md), [`std::hash`](std_hash.md), and [`to_ubjson`](to_ubjson.md) for byte types that are not
-  integers (e.g., `#!cpp std::byte`) in version 3.13.0. `dump` now writes the bytes of a signed byte type (e.g.,
-  `#!cpp char`) as 0..255 rather than as negative numbers.
@@ -11,14 +11,6 @@ literals `#!json true` and `#!json false`.

 To store boolean values in C++, a type is defined by the template parameter  `BooleanType` which chooses the type to use.

-## Template parameters
-
-`BooleanType`
-:   the type to store booleans. As it is stored directly inside a `basic_json` value (in a union), it must be a
-    trivially default-constructible, trivially copyable, and trivially destructible type that is convertible to and
-    from `#!cpp bool`. See
-    [Template Parameter Requirements](../../features/types/template_parameters.md#booleantype).
-
 ## Notes

 #### Default type
@@ -36,11 +36,6 @@ Constant.
    --8<-- "examples/cbegin.output"
    ```

-## See also
-
- [cend](cend.md) - returns a const iterator to one past the last element
- [basic_json_view::cbegin](../basic_json_view/cbegin.md) - the same iteration on a zero-copy view
-
 ## Version history

 - Added in version 1.0.0.
@@ -18,8 +18,7 @@ ignore
 :   ignore tags

 store
-:   store tagged byte strings (for bytes 0xd8..0xdb) as binary values with the tag as subtype; other tagged values are
-    read as if the tag were ignored. If several tags precede a byte string, only the innermost one is stored.
+:   store tagged values as binary container with subtype (for bytes 0xd8..0xdb)

 ## Examples

@@ -36,11 +36,6 @@ Constant.
    --8<-- "examples/cend.output"
    ```

-## See also
-
- [cbegin](cbegin.md) - returns a const iterator to the first element
- [basic_json_view::cend](../basic_json_view/cend.md) - the same iteration on a zero-copy view
-
 ## Version history

 - Added in version 1.0.0.
@@ -111,7 +111,6 @@ Logarithmic in the size of the JSON object.

 - [find](find.md) find a value in an object
 - [count](count.md) returns the number of occurrences of a key
- [basic_json_view::contains](../basic_json_view/contains.md) - the same check on a zero-copy view

 ## Version history

@@ -76,7 +76,6 @@ This method always returns `0` when executed on a JSON type that is not an objec

 - [find](find.md) find a value in an object
 - [contains](contains.md) checks whether a key exists
- [basic_json_view::count](../basic_json_view/count.md) - the same check on a zero-copy view

 ## Version history

@@ -43,17 +43,6 @@ Strong guarantee: if an exception is thrown, there are no changes to any JSON va
 Throws [`type_error.316`](../../home/exceptions.md#jsonexceptiontype_error316) if a string stored inside the JSON value
 is not UTF-8 encoded and `error_handler` is set to `strict`

-!!! warning "Serializing untrusted input"
-
-    When serializing values that may contain invalid or untrusted UTF-8 (e.g., bytes taken directly from network
-    input), `dump()` throws [`type_error.316`](../../home/exceptions.md#jsonexceptiontype_error316) in the default
-    `strict` mode. To serialize such data without throwing, pass
-    [`error_handler_t::replace`](error_handler_t.md) (substitutes U+FFFD) or
-    [`error_handler_t::ignore`](error_handler_t.md). Callers that serialize untrusted input on a crash-sensitive path
-    should either choose a non-strict error handler or wrap `dump()` in a `#!cpp try`/`#!cpp catch`.
-
-    See the [FAQ](../../home/faq.md#serializing-untrusted-or-invalid-utf-8) for details.
-
 ## Complexity

 Linear.
@@ -86,8 +75,6 @@ Binary values are serialized as an object containing two keys:

 - [to_string](to_string.md) returns a string representation of a JSON value
 - [operator<<](../operator_ltlt.md) serialize to stream
- [`basic_json_view::dump`](../basic_json_view/dump.md) the corresponding function of `basic_json_view`, serializing
-  directly from a flat index without building a `basic_json` value
 - [Serialization](../../features/serialization.md) - the serialization article

 ## Version history
@@ -60,10 +60,6 @@ itself is empty which is `#!cpp false` in the case of a string.
    --8<-- "examples/empty.output"
    ```

-## See also
-
- [basic_json_view::empty](../basic_json_view/empty.md) - the same check on a zero-copy view
-
 ## Version history

 - Added in version 1.0.0.
@@ -37,11 +37,6 @@ Constant.
    --8<-- "examples/end.output"
    ```

-## See also
-
- [begin](begin.md) - returns an iterator to the first element
- [basic_json_view::end](../basic_json_view/end.md) - the same iteration on a zero-copy view
-
 ## Version history

 - Added in version 1.0.0.
@@ -80,7 +80,6 @@ This method always returns `end()` when executed on a JSON type that is not an o

 - [count](count.md) returns the number of occurrences of a key
 - [contains](contains.md) checks whether a key exists
- [basic_json_view::find](../basic_json_view/find.md) - the same lookup on a zero-copy view

 ## Version history

@@ -104,7 +104,6 @@ Linear in the size of the input.
 - [from_msgpack](from_msgpack.md) create a JSON value from an input in MessagePack format
 - [from_bson](from_bson.md) create a JSON value from an input in BSON format
 - [from_ubjson](from_ubjson.md) create a JSON value from an input in UBJSON format
- [from_bon8](from_bon8.md) create a JSON value from an input in BON8 format

 ## Version history

@@ -1,108 +0,0 @@
-# <small>nlohmann::basic_json::</small>from_bon8
-
-```cpp
-// (1)
-template<typename InputType>
-static basic_json from_bon8(InputType&& i,
-                            const bool strict = true,
-                            const bool allow_exceptions = true);
-// (2)
-template<typename IteratorType, typename SentinelType = IteratorType>
-static basic_json from_bon8(IteratorType first, SentinelType last,
-                            const bool strict = true,
-                            const bool allow_exceptions = true);
-```
-
-Deserializes a given input to a JSON value using the BON8 (Binary Object Notation 8) serialization format.
-
-1. Reads from a compatible input.
-2. Reads from an iterator range, or an iterator and a sentinel of a different type (C++20 ranges support).
-
-The exact mapping and its limitations are described on a [dedicated page](../../features/binary_formats/bon8.md).
-
-## Template parameters
-
-`InputType`
-:   A compatible input, for instance:
-
-    - an `std::istream` object
-    - a `FILE` pointer
-    - a C-style array of characters
-    - a pointer to a null-terminated string of single byte characters
-    - a container `obj` for which `begin(obj)` and `end(obj)` produce a valid pair of iterators
-      (as found via ADL or member functions, with semantics compatible to `std::begin` and `std::end`)
-
-`IteratorType`
-:   a compatible iterator type
-
-`SentinelType`
-:   defaults to `IteratorType`; may be a different type comparable to `IteratorType` via `operator!=`, for instance.
-
-    - a custom sentinel type for C++20 ranges
-    - `std::default_sentinel_t`, when `IteratorType` is `std::counted_iterator`
-
-## Parameters
-
-`i` (in)
-:   an input in BON8 format convertible to an input adapter
-
-`first` (in)
-:   iterator to the start of the input
-
-`last` (in)
-:   iterator to the end of the input, or a sentinel value that compares equal to the end iterator with `operator!=`
-
-`strict` (in)
-:   whether to expect the input to be consumed until EOF (`#!cpp true` by default)
-
-`allow_exceptions` (in)
-:   whether to throw exceptions in case of a parse error (optional, `#!cpp true` by default)
-
-## Return value
-
-deserialized JSON value; in case of a parse error and `allow_exceptions` set to `#!cpp false`, the return value will be
-`value_t::discarded`. The latter can be checked with [`is_discarded`](is_discarded.md).
-
-## Exception safety
-
-Strong guarantee: if an exception is thrown, there are no changes in the JSON value.
-
-## Exceptions
-
- Throws [parse_error.110](../../home/exceptions.md#jsonexceptionparse_error110) if the given input ends prematurely or
-  the end of the file was not reached when `strict` was set to true
- Throws [parse_error.112](../../home/exceptions.md#jsonexceptionparse_error112) if a parse error occurs, for instance
-  an invalid byte, a string that is not valid UTF-8, or an object key that is not a string
-
-## Complexity
-
-Linear in the size of the input.
-
-## Examples
-
-??? example
-
-    The example shows the deserialization of a byte vector in BON8 format to a JSON value.
-     
-    ```cpp
-    --8<-- "examples/from_bon8.cpp"
-    ```
-    
-    Output:
-    
-    ```json
-    --8<-- "examples/from_bon8.output"
-    ```
-
-## See also
-
- [to_bon8](to_bon8.md) create a BON8 serialization of a JSON value
- [from_cbor](from_cbor.md) create a JSON value from an input in CBOR format
- [from_msgpack](from_msgpack.md) create a JSON value from an input in MessagePack format
- [from_bson](from_bson.md) create a JSON value from an input in BSON format
- [from_ubjson](from_ubjson.md) create a JSON value from an input in UBJSON format
- [from_bjdata](from_bjdata.md) create a JSON value from an input in BJData format
-
-## Version history
-
- Added in version 3.13.0.
@@ -104,7 +104,6 @@ Linear in the size of the input.
 - [from_msgpack](from_msgpack.md) for the related MessagePack format
 - [from_ubjson](from_ubjson.md) for the related UBJSON format
 - [from_bjdata](from_bjdata.md) for the related BJData format
- [from_bon8](from_bon8.md) for the related BON8 format

 ## Version history

@@ -80,8 +80,8 @@ Strong guarantee: if an exception is thrown, there are no changes in the JSON va
  the end of the file was not reached when `strict` was set to true
 - Throws [parse_error.112](../../home/exceptions.md#jsonexceptionparse_error112) if unsupported features from CBOR were
  used in the given input or if the input is not valid CBOR
- Throws [parse_error.113](../../home/exceptions.md#jsonexceptionparse_error113) if a map key is not a string (keys of other
-  types are not supported, as JSON object keys are always strings) or a string is malformed
+- Throws [parse_error.113](../../home/exceptions.md#jsonexceptionparse_error113) if a string was expected as a map key,
+  but not found

 ## Complexity

@@ -110,7 +110,6 @@ Linear in the size of the input.
 - [from_bson](from_bson.md) create a JSON value from an input in BSON format
 - [from_ubjson](from_ubjson.md) create a JSON value from an input in UBJSON format
 - [from_bjdata](from_bjdata.md) create a JSON value from an input in BJData format
- [from_bon8](from_bon8.md) create a JSON value from an input in BON8 format

 ## Version history

@@ -73,8 +73,8 @@ Strong guarantee: if an exception is thrown, there are no changes in the JSON va
  the end of the file was not reached when `strict` was set to true
 - Throws [parse_error.112](../../home/exceptions.md#jsonexceptionparse_error112) if unsupported features from
  MessagePack were used in the given input or if the input is not valid MessagePack
- Throws [parse_error.113](../../home/exceptions.md#jsonexceptionparse_error113) if a map key is not a string (keys of other
-  types are not supported, as JSON object keys are always strings) or a string is malformed
+- Throws [parse_error.113](../../home/exceptions.md#jsonexceptionparse_error113) if a string was expected as a map key,
+  but not found

 ## Complexity

@@ -103,7 +103,6 @@ Linear in the size of the input.
 - [from_bson](from_bson.md) create a JSON value from an input in BSON format
 - [from_ubjson](from_ubjson.md) create a JSON value from an input in UBJSON format
 - [from_bjdata](from_bjdata.md) create a JSON value from an input in BJData format
- [from_bon8](from_bon8.md) create a JSON value from an input in BON8 format

 ## Version history

@@ -104,7 +104,6 @@ Linear in the size of the input.
 - [from_msgpack](from_msgpack.md) create a JSON value from an input in MessagePack format
 - [from_bson](from_bson.md) create a JSON value from an input in BSON format
 - [from_bjdata](from_bjdata.md) create a JSON value from an input in BJData format
- [from_bon8](from_bon8.md) create a JSON value from an input in BON8 format

 ## Version history

@@ -51,7 +51,6 @@ Constant.
 ## See also

 - [back](back.md) to access the last element
- [basic_json_view::front](../basic_json_view/front.md) - the same access on a zero-copy view

 ## Version history

@@ -163,8 +163,6 @@ overload (3).
 - [get_ref](get_ref.md) get a reference to the stored value
 - [operator ValueType](operator_ValueType.md) get a value via implicit conversion
 - [Converting values](../../features/conversions.md) - the type conversions article
- [basic_json_view::get](../basic_json_view/get.md) - the same conversion on a zero-copy view (many types are
-  converted without ever building a `basic_json` value)

 ## Version history

@@ -61,8 +61,6 @@ Constant.
 ## See also

 - [get_ptr()](get_ptr.md) get a pointer value
- [basic_json_view::get_string](../basic_json_view/get_string.md) - the closest counterpart on a zero-copy view: a
-  string without a copy, but as a view rather than a reference to a value that must already exist

 ## Version history

@@ -21,10 +21,6 @@ This overload is chosen if:
 - `ValueType` is not `basic_json`,
 - `json_serializer<ValueType>` has a `from_json()` method of the form `void from_json(const basic_json&, ValueType&)`

-`v` must not be `const`. Passing a `const` object is a compile-time error. For types such as arithmetic types, enums,
-and C arrays, the error is a `static_assert` that names the problem. For other types, the overload is not viable, and
-the compiler reports that no matching `get_to` was found.
-
 ## Template parameters

 `ValueType`
@@ -67,9 +63,7 @@ Depends on the `json_serializer<ValueType>::from_json()` implementation.
 - [get_ref](get_ref.md) get a reference to the stored value
 - [get_ptr](get_ptr.md) get a pointer to the stored value
 - [Converting values](../../features/conversions.md) - the type conversions article
- [basic_json_view::get_to](../basic_json_view/get_to.md) - the same conversion on a zero-copy view

 ## Version history

 - Since version 3.3.0.
- Added a `static_assert` with a clear message for `const` arguments in version 3.13.0.
@@ -35,10 +35,6 @@ class basic_json;
 | `BinaryType`         | type for binary arrays                                                    | [`binary_t`](binary_t.md)                   |
 | `CustomBaseClass`    | extension point for user code                                             | [`json_base_class_t`](json_base_class_t.md) |

-The library imposes a number of requirements on these types that are not expressed as C++ concepts, such as the
-container operations `object_t` and `array_t` must provide, or the fact that `StringType` must be `char`-based. They
-are collected in [Template Parameter Requirements](../../features/types/template_parameters.md).
-
 ## Specializations

 - [**json**](../json.md) - default specialization
@@ -290,13 +286,11 @@ Access to the JSON value
 ### Binary formats

 - [**from_bjdata**](from_bjdata.md) (_static_) - create a JSON value from an input in BJData format
- [**from_bon8**](from_bon8.md) (_static_) - create a JSON value from an input in BON8 format
 - [**from_bson**](from_bson.md) (_static_) - create a JSON value from an input in BSON format
 - [**from_cbor**](from_cbor.md) (_static_) - create a JSON value from an input in CBOR format
 - [**from_msgpack**](from_msgpack.md) (_static_) - create a JSON value from an input in MessagePack format
 - [**from_ubjson**](from_ubjson.md) (_static_) - create a JSON value from an input in UBJSON format
 - [**to_bjdata**](to_bjdata.md) (_static_) - create a BJData serialization of a given JSON value
- [**to_bon8**](to_bon8.md) (_static_) - create a BON8 serialization of a given JSON value
 - [**to_bson**](to_bson.md) (_static_) - create a BSON serialization of a given JSON value
 - [**to_cbor**](to_cbor.md) (_static_) - create a CBOR serialization of a given JSON value
 - [**to_msgpack**](to_msgpack.md) (_static_) - create a MessagePack serialization of a given JSON value
@@ -7,8 +7,7 @@ enum class input_format_t {
    msgpack,
    ubjson,
    bson,
-    bjdata,
-    bon8
+    bjdata
 };
 ```

@@ -32,9 +31,6 @@ bson
 bjdata
 :   BJData (Binary JData)

-bon8
-:   BON8 (Binary Object Notation 8)
-
 ## Examples

 ??? example
@@ -88,8 +88,6 @@ Strong exception safety: if an exception occurs, the original value stays intact
      do not belong to the same JSON value; example: `"iterators do not fit"`
    - Throws [`invalid_iterator.211`](../../home/exceptions.md#jsonexceptioninvalid_iterator211) if `first` or `last`
      are iterators into container for which insert is called; example: `"passed iterators may not belong to container"`
-    - Throws [`invalid_iterator.202`](../../home/exceptions.md#jsonexceptioninvalid_iterator202) if `first` or `last`
-      do not point to an array; example: `"iterators first and last must point to arrays"`
 4. The function can throw the following exceptions:
    - Throws [`type_error.309`](../../home/exceptions.md#jsonexceptiontype_error309) if called on JSON values other than
      arrays; example: `"cannot use insert() with string"`
@@ -34,10 +34,6 @@ Constant.
    --8<-- "examples/is_array.output"
    ```

-## See also
-
- [basic_json_view::is_array](../basic_json_view/is_array.md) - the same check on a zero-copy view
-
 ## Version history

 - Added in version 1.0.0.
@@ -34,10 +34,6 @@ Constant.
    --8<-- "examples/is_binary.output"
    ```

-## See also
-
- [basic_json_view::is_binary](../basic_json_view/is_binary.md) - the same check on a zero-copy view
-
 ## Version history

 - Added in version 3.8.0.
@@ -34,10 +34,6 @@ Constant.
    --8<-- "examples/is_boolean.output"
    ```

-## See also
-
- [basic_json_view::is_boolean](../basic_json_view/is_boolean.md) - the same check on a zero-copy view
-
 ## Version history

 - Added in version 1.0.0.
@@ -69,11 +69,6 @@ with `allow_exceptions` set to `#!cpp false`: a parse error then yields a discar
    --8<-- "examples/is_discarded.output"
    ```

-## See also
-
- [basic_json_view::is_discarded](../basic_json_view/is_discarded.md) - the corresponding check on a zero-copy view,
-  which is `#!cpp true` if the view refers to no value
-
 ## Version history

 - Added in version 1.0.0.
@@ -34,10 +34,6 @@ Constant.
    --8<-- "examples/is_null.output"
    ```

-## See also
-
- [basic_json_view::is_null](../basic_json_view/is_null.md) - the same check on a zero-copy view
-
 ## Version history

 - Added in version 1.0.0.
@@ -49,7 +49,6 @@ constexpr bool is_number() const noexcept
 - [is_number_integer()](is_number_integer.md) check if the value is an integer or unsigned integer number
 - [is_number_unsigned()](is_number_unsigned.md) check if the value is an unsigned integer number
 - [is_number_float()](is_number_float.md) check if the value is a floating-point number
- [basic_json_view::is_number](../basic_json_view/is_number.md) - the same check on a zero-copy view

 ## Version history

@@ -40,7 +40,6 @@ Constant.
 - [is_number()](is_number.md) check if the value is a number
 - [is_number_integer()](is_number_integer.md) check if the value is an integer or unsigned integer number
 - [is_number_unsigned()](is_number_unsigned.md) check if the value is an unsigned integer number
- [basic_json_view::is_number_float](../basic_json_view/is_number_float.md) - the same check on a zero-copy view

 ## Version history

@@ -40,7 +40,6 @@ Constant.
 - [is_number()](is_number.md) check if the value is a number
 - [is_number_unsigned()](is_number_unsigned.md) check if the value is an unsigned integer number
 - [is_number_float()](is_number_float.md) check if the value is a floating-point number
- [basic_json_view::is_number_integer](../basic_json_view/is_number_integer.md) - the same check on a zero-copy view

 ## Version history

@@ -40,7 +40,6 @@ Constant.
 - [is_number()](is_number.md) check if the value is a number
 - [is_number_integer()](is_number_integer.md) check if the value is an integer or unsigned integer number
 - [is_number_float()](is_number_float.md) check if the value is a floating-point number
- [basic_json_view::is_number_unsigned](../basic_json_view/is_number_unsigned.md) - the same check on a zero-copy view

 ## Version history

@@ -34,10 +34,6 @@ Constant.
    --8<-- "examples/is_object.output"
    ```

-## See also
-
- [basic_json_view::is_object](../basic_json_view/is_object.md) - the same check on a zero-copy view
-
 ## Version history

 - Added in version 1.0.0.
@@ -62,7 +62,6 @@ This library extends primitive types to binary types, because binary types are r
 - [is_boolean()](is_boolean.md) returns whether the JSON value is a boolean
 - [is_number()](is_number.md) returns whether the JSON value is a number
 - [is_binary()](is_binary.md) returns whether the JSON value is a binary array
- [basic_json_view::is_primitive](../basic_json_view/is_primitive.md) - the same check on a zero-copy view

 ## Version history

@@ -34,10 +34,6 @@ Constant.
    --8<-- "examples/is_string.output"
    ```

-## See also
-
- [basic_json_view::is_string](../basic_json_view/is_string.md) - the same check on a zero-copy view
-
 ## Version history

 - Added in version 1.0.0.
@@ -57,7 +57,6 @@ Note that though strings are containers in C++, they are treated as primitive va
 - [is_primitive()](is_primitive.md) returns whether JSON value is primitive
 - [is_array()](is_array.md) returns whether the value is an array
 - [is_object()](is_object.md) returns whether the value is an object
- [basic_json_view::is_structured](../basic_json_view/is_structured.md) - the same check on a zero-copy view

 ## Version history

@@ -99,8 +99,6 @@ When iterating over an array, `key()` will return the index of the element as st

 - [begin](begin.md) returns an iterator to the first element
 - [end](end.md) returns an iterator to one past the last element
- [basic_json_view::items](../basic_json_view/items.md) - the same range on a zero-copy view (`#!cpp const auto`,
-  not `#!cpp const auto&`: items are produced on the fly)

 ## Version history

@@ -21,11 +21,8 @@ The default value for `CustomBaseClass` is `void`. In this case, an

 #### Limitations

-The type `CustomBaseClass` has to be a default-constructible, non-`final` class.
+The type `CustomBaseClass` has to be a default-constructible class.
 `basic_json` only supports copy/move construction/assignment if `CustomBaseClass` does so as well.
-A `CustomBaseClass` with non-static data members forfeits `basic_json`'s
-[standard layout](https://en.cppreference.com/w/cpp/named_req/StandardLayoutType) guarantee. See
-[Template Parameter Requirements](../../features/types/template_parameters.md#custombaseclass).

 ## Examples

@@ -19,12 +19,6 @@ using json_serializer = JSONSerializer<T, SFINAE>;

 The default values for `json_serializer` is [`adl_serializer`](../adl_serializer/index.md).

-#### Requirements
-
-A custom serializer must provide `#!cpp static void to_json(basic_json&, T)` for every type it serializes, and either
-`#!cpp static void from_json(const basic_json&, T&)` or `#!cpp static T from_json(const basic_json&)` for every type it
-deserializes. See [Template Parameter Requirements](../../features/types/template_parameters.md#jsonserializer).
-
 ## Examples

 ??? example
@@ -20,16 +20,6 @@ used.
 To store floating-point numbers in C++, a type is defined by the template parameter `NumberFloatType` which chooses the
 type to use.

-## Template parameters
-
-`NumberFloatType`
-:   the type to store floating-point numbers. Parsing and serialization are implemented in terms of
-    `#!cpp std::strtof`/`#!cpp std::strtod`/`#!cpp std::strtold` and `#!cpp std::snprintf`, so the type must be
-    `#!cpp float`, `#!cpp double`, or `#!cpp long double`. The
-    [binary formats](../../features/binary_formats/index.md) additionally require `#!cpp float` or `#!cpp double`,
-    because they have no encoding for `#!cpp long double`. See
-    [Template Parameter Requirements](../../features/types/template_parameters.md#numberfloattype).
-
 ## Notes

 #### Default type
@@ -20,13 +20,6 @@ used.
 To store integer numbers in C++, a type is defined by the template parameter `NumberIntegerType` which chooses the type
 to use.

-## Template parameters
-
-`NumberIntegerType`
-:   the type to store signed integers. It must be a **signed integral** type (`#!cpp std::is_integral`) with a
-    `#!cpp std::numeric_limits` specialization, and it is stored directly inside a `basic_json` value. See
-    [Template Parameter Requirements](../../features/types/template_parameters.md#numberintegertype-and-numberunsignedtype).
-
 ## Notes

 #### Default type
@@ -20,14 +20,6 @@ used.
 To store unsigned integer numbers in C++, a type is defined by the template parameter `NumberUnsignedType` which chooses
 the type to use.

-## Template parameters
-
-`NumberUnsignedType`
-:   the type to store unsigned integers. It must be an **unsigned integral** type (`#!cpp std::is_integral`) with a
-    `#!cpp std::numeric_limits` specialization, and it must be able to represent the absolute value of every
-    [`number_integer_t`](number_integer_t.md) value. See
-    [Template Parameter Requirements](../../features/types/template_parameters.md#numberintegertype-and-numberunsignedtype).
-
 ## Notes

 #### Default type
@@ -30,5 +30,3 @@ and [`default_object_comparator_t`](default_object_comparator_t.md) otherwise.
 - Added in version 3.0.0.
 - Changed to be conditionally defined as `#!cpp typename object_t::key_compare` or `default_object_comparator_t` in
  version 3.11.0.
- Fixed the fallback to `default_object_comparator_t`, which previously failed to compile for object types without a
-  `key_compare` member type, in version 3.13.0.
@@ -18,11 +18,7 @@ To store objects in C++, a type is defined by the template parameters described
 ## Template parameters

 `ObjectType`
-:   the container to store objects. Its template parameters must have the same order and meaning as those of
-    `std::map`; in particular, the third parameter is a comparator. `#!cpp std::unordered_map`, whose third parameter
-    is a hash function, therefore needs an adapter -- see
-    [Template Parameter Requirements](../../features/types/template_parameters.md#objecttype) for the full list of
-    requirements, an adapter example, and the containers that are known to work.
+:   the container to store objects (e.g., `std::map` or `std::unordered_map`)

 `StringType`
 :   the type of the keys or names (e.g., `std::string`). The comparison function `std::less<StringType>` is used to
@@ -126,4 +122,3 @@ the object is silently converted as an array of key-value pairs, which is incorr
 ## Version history

 - Added in version 1.0.0.
- Allowed object types whose `erase(iterator)` returns `#!cpp void` in version 3.13.0.
@@ -254,8 +254,6 @@ Strong exception safety: if an exception occurs, the original value stays intact
 - documentation on [runtime assertions](../../features/assertions.md)
 - see [`at`](at.md) for access by reference with range checking
 - see [`value`](value.md) for access with default value
- [basic_json_view::operator[]](../basic_json_view/operator%5B%5D.md) - the same access on a zero-copy view (always
-  returns a discarded view instead of assuming undefined behavior)

 ## Version history

@@ -166,8 +166,6 @@ Linear.

 - [operator!=](operator_ne.md) compare for inequality
 - [operator<=>](operator_spaceship.md) comparison: 3-way (C++20)
- [basic_json_view::operator==](../basic_json_view/operator_eq.md) - the same comparison on a zero-copy view, without
-  building a `basic_json` value for it

 ## Version history

@@ -89,12 +89,6 @@ Linear.
    --8<-- "examples/operator__notequal__nullptr_t.output"
    ```

-## See also
-
- [operator==](operator_eq.md) compare for equality
- [basic_json_view::operator!=](../basic_json_view/operator_ne.md) - the same comparison on a zero-copy view, without
-  building a `basic_json` value for it
-
 ## Version history

 1. Added in version 1.0.0. Added C++20 member functions in version 3.11.0. Changed in version 3.13.0 to remove 
@@ -103,10 +103,6 @@ A UTF-8 byte order mark is silently ignored.
 Invalid Unicode escapes and unpaired surrogates in the input are reported as
 [`parse_error.101`](../../home/exceptions.md#jsonexceptionparse_error101) with a detailed message.

-By default, a `'\0'` (NUL) byte anywhere in the input is treated as end of input, rather than as an ordinary (and,
-outside of a string, invalid) byte; see the [FAQ entry](../../home/faq.md#nul-bytes-in-the-input) for details and the
-[`JSON_STRICT_NUL_HANDLING`](../macros/json_strict_nul_handling.md) macro to opt into rejecting it instead.
-
 ## Examples

 ??? example "Parsing from a character array"
@@ -240,8 +236,6 @@ outside of a string, invalid) byte; see the [FAQ entry](../../home/faq.md#nul-by
 - [accept](accept.md) - check if the input is valid JSON
 - [sax_parse](sax_parse.md) - parse input using the SAX interface
 - [operator>>](../operator_gtgt.md) - deserialize from stream
- [`JSON_STRICT_NUL_HANDLING`](../macros/json_strict_nul_handling.md) - opt in to rejecting a NUL byte in the input
-  instead of treating it as end of input

 ## Version history

@@ -252,8 +246,6 @@ outside of a string, invalid) byte; see the [FAQ entry](../../home/faq.md#nul-by
 - Added `ignore_trailing_commas` in version 3.13.0.
 - Extended container support (1) to include types with lvalue-only ADL `begin`/`end` (matching `std::begin`/`std::end` semantics) in version 3.13.0.
 - Extended overload (2) to accept heterogeneous iterator+sentinel pairs (C++20 ranges support) in version 3.13.0.
- `JSON_STRICT_NUL_HANDLING` added in version 3.13.0 to optionally reject a NUL byte in the input instead of treating
-  it as end of input; planned to become the default in version 4.0.0.

 !!! warning "Deprecation"

@@ -5,7 +5,7 @@ class parse_error : public exception;
 ```

 The library throws this exception when a parse error occurs. Parse errors can occur during the deserialization of
-JSON text, BJData, BON8, BSON, CBOR, MessagePack, UBJSON, as well as when using JSON Patch.
+JSON text, BSON, CBOR, MessagePack, UBJSON, as well as when using JSON Patch.

 Member `byte` holds the byte index of the last read character in the input file (see note below).

@@ -29,14 +29,7 @@ Discarding a value (i.e., returning `#!cpp false`) has different effects dependi
 called:

 - Discarded values in structured types are skipped. That is, the parser will behave as if the discarded value was never
-  read. This holds for every value type and for both kinds of parent: a discarded element is removed from the
-  surrounding array, and a discarded member is removed from the surrounding object together with its key.
- Arrays and objects can be discarded either at their `parse_event_t::array_start`/`parse_event_t::object_start` event
-  or at their `parse_event_t::array_end`/`parse_event_t::object_end` event, and both remove the whole value. Discarding
-  it at the start event also means the callback is called neither for the content of the value nor for its matching end
-  event.
- Discarding a `parse_event_t::key` event discards the whole object member. The callback is still called for the
-  associated value, but its return value has no further effect.
+  read.
 - In case a value outside a structured type is skipped, it is replaced with `null`. This case happens if the top-level
  element is skipped.

@@ -56,7 +49,7 @@ called:
 ## Return value

 Whether the JSON value which called the function during parsing should be kept (`#!cpp true`) or not (`#!cpp false`). In
-the latter case, it is skipped completely, or replaced by `null` if it is the top-level value.
+the latter case, it is either skipped completely or replaced by an empty discarded object.

 ## Examples

@@ -75,21 +68,6 @@ the latter case, it is skipped completely, or replaced by `null` if it is the to
    --8<-- "examples/parse__string__parser_callback_t.output"
    ```

-??? example
-
-    The example below shows where discarded values are removed. The array and the number are discarded in different
-    ways, but in each case the parse result contains neither the value nor its key.
-
-    ```cpp
-    --8<-- "examples/parser_callback_t.cpp"
-    ```
-
-    Output:
-
-    ```json
-    --8<-- "examples/parser_callback_t.output"
-    ```
-
 ## See also

 - [parse](parse.md) deserialize from a compatible input
@@ -98,5 +76,3 @@ the latter case, it is skipped completely, or replaced by `null` if it is the to
 ## Version history

 - Added in version 1.0.0.
- Fixed in version 3.13.0 to also remove discarded values from a parent object; before, discarding an array or a value
-  stored under an object key left a discarded member behind, which made the parse result serialize to invalid JSON.
@@ -34,10 +34,6 @@ Strong guarantee: if an exception is thrown, there are no changes in the JSON va
  ("add", "remove", "move")
 - Throws [`out_of_range.411`](../../home/exceptions.md#jsonexceptionout_of_range411) if an "add" operation's target
  location has a parent that is neither an object nor an array.
- Throws [`out_of_range.413`](../../home/exceptions.md#jsonexceptionout_of_range413) if a "remove" operation's target
-  location has a parent that is neither an object nor an array.
- Throws [`out_of_range.414`](../../home/exceptions.md#jsonexceptionout_of_range414) if a "move" operation's "from"
-  location is a proper prefix of its "path" location.
 - Throws [`other_error.501`](../../home/exceptions.md#jsonexceptionother_error501) if "test" operation was
  unsuccessful.

@@ -79,7 +75,3 @@ is thrown. In any case, the original value is not changed: the patch is applied
 - Added in version 2.0.0.
 - Added [`out_of_range.411`](../../home/exceptions.md#jsonexceptionout_of_range411) and stopped relying on an internal assertion when an "add" operation's
  target location has a non-object/non-array parent in version 3.13.0.
- Added [`out_of_range.413`](../../home/exceptions.md#jsonexceptionout_of_range413) and stopped silently ignoring a "remove" operation whose target
-  location has a non-object/non-array parent in version 3.13.0.
- Added [`out_of_range.414`](../../home/exceptions.md#jsonexceptionout_of_range414) and rejected a "move" operation whose "from" location is a proper
-  prefix of its "path" location instead of silently producing a corrupted result in version 3.13.0.
@@ -30,10 +30,6 @@ No guarantees, value may be corrupted by an unsuccessful patch operation.
  ("add", "remove", "move")
 - Throws [`out_of_range.411`](../../home/exceptions.md#jsonexceptionout_of_range411) if an "add" operation's target
  location has a parent that is neither an object nor an array.
- Throws [`out_of_range.413`](../../home/exceptions.md#jsonexceptionout_of_range413) if a "remove" operation's target
-  location has a parent that is neither an object nor an array.
- Throws [`out_of_range.414`](../../home/exceptions.md#jsonexceptionout_of_range414) if a "move" operation's "from"
-  location is a proper prefix of its "path" location.
 - Throws [`other_error.501`](../../home/exceptions.md#jsonexceptionother_error501) if "test" operation was
  unsuccessful.

@@ -76,7 +72,3 @@ function throws an exception.
 - Added in version 3.11.0.
 - Added [`out_of_range.411`](../../home/exceptions.md#jsonexceptionout_of_range411) and stopped relying on an internal assertion when an "add" operation's
  target location has a non-object/non-array parent in version 3.13.0.
- Added [`out_of_range.413`](../../home/exceptions.md#jsonexceptionout_of_range413) and stopped silently ignoring a "remove" operation whose target
-  location has a non-object/non-array parent in version 3.13.0.
- Added [`out_of_range.414`](../../home/exceptions.md#jsonexceptionout_of_range414) and rejected a "move" operation whose "from" location is a proper
-  prefix of its "path" location instead of silently producing a corrupted result in version 3.13.0.
@@ -65,14 +65,11 @@ The SAX event lister must follow the interface of [`json_sax`](../json_sax/index
 :   SAX event listener (must not be null)

 `format` (in)
-:    the format to parse (JSON, BJData, BON8, BSON, CBOR, MessagePack, or UBJSON) (optional, `input_format_t::json` by
-     default), see
+:    the format to parse (JSON, CBOR, MessagePack, or UBJSON) (optional, `input_format_t::json` by default), see
     [`input_format_t`](input_format_t.md) for more information

 `strict` (in)
-:   whether the input has to be consumed completely (optional, `#!cpp true` by default); when `#!cpp false` and the
-    input is a `#!cpp std::istream`, the character that terminates a number is consumed unless
-    [`JSON_PRECISE_STREAM_POSITION`](../macros/json_precise_stream_position.md) is defined to `1`; see [`operator>>`](../operator_gtgt.md#notes)
+:   whether the input has to be consumed completely (optional, `#!cpp true` by default)

 `ignore_comments` (in)
 :   whether comments should be ignored and treated like whitespace (`#!cpp true`) or yield a parse error
@@ -139,8 +136,6 @@ A UTF-8 byte order mark is silently ignored.
 - Added `ignore_trailing_commas` in version 3.13.0.
 - Extended container support (1) to include types with lvalue-only ADL `begin`/`end` (matching `std::begin`/`std::end` semantics) in version 3.13.0.
 - Extended overload (2) to accept heterogeneous iterator+sentinel pairs (C++20 ranges support) in version 3.13.0.
- `JSON_PRECISE_STREAM_POSITION` added in version 3.13.0 to optionally leave a `#!cpp std::istream` positioned right
-  after the parsed value when `strict` is `#!cpp false`.

 !!! warning "Deprecation"

@@ -51,10 +51,6 @@ JSON value which is `1` in the case of a string.
    --8<-- "examples/size.output"
    ```

-## See also
-
- [basic_json_view::size](../basic_json_view/size.md) - the same function on a zero-copy view
-
 ## Version history

 - Added in version 1.0.0.
@@ -23,11 +23,6 @@ JSON class into byte-sized characters during deserialization.
    `StringType`. To work with wide-character data, convert it to/from UTF-8 at the boundary instead -- see the
    FAQ's [wide string handling](../../home/faq.md#wide-string-handling) section for a conversion recipe.

-    Beyond the character type, the library expects a substantial part of the `#!cpp std::string` interface (contiguous
-    null-terminated `data()`, `substr()`, `find()`, `append()`, ...). See
-    [Template Parameter Requirements](../../features/types/template_parameters.md#stringtype) for the full list and
-    for the string types that are known to work.
-
 ## Notes

 #### Default type
@@ -83,5 +78,3 @@ and an example.
 ## Version history

 - Added in version 1.0.0.
- Removed the requirement that `string_t` be implicitly convertible from `#!cpp std::string`, which the BSON writer and
-  the UBJSON reader relied on, in version 3.13.0.
@@ -34,14 +34,10 @@ void swap(typename binary_t::container_type& other);
 ```

 1. Exchanges the contents of the JSON value with those of `other`. Does not invoke any move, copy, or swap operations on
-   individual elements. All iterators and references remain valid. The past-the-end iterator is invalidated. If macro
-   [`JSON_DIAGNOSTIC_POSITIONS`](../macros/json_diagnostic_positions.md) is defined to `#!cpp 1`, the
-   [`start_pos()`](start_pos.md)/[`end_pos()`](end_pos.md) diagnostic positions are exchanged along with the value.
+   individual elements. All iterators and references remain valid. The past-the-end iterator is invalidated. 
 2. Exchanges the contents of the JSON value from `left` with those of `right`. Does not invoke any move, copy, or swap
   operations on individual elements. All iterators and references remain valid. The past-the-end iterator is
-   invalidated. Implemented as a friend function callable via ADL. If macro
-   [`JSON_DIAGNOSTIC_POSITIONS`](../macros/json_diagnostic_positions.md) is defined to `#!cpp 1`, the
-   [`start_pos()`](start_pos.md)/[`end_pos()`](end_pos.md) diagnostic positions are exchanged along with the value.
+   invalidated. Implemented as a friend function callable via ADL.
 3. Exchanges the contents of a JSON array with those of `other`. Does not invoke any move, copy, or swap operations on
   individual elements. All iterators and references remain valid. The past-the-end iterator is invalidated. 
 4. Exchanges the contents of a JSON object with those of `other`. Does not invoke any move, copy, or swap operations on
@@ -52,11 +52,6 @@ optional, `#!cpp bjdata_version_t::draft2` by default.

 Strong guarantee: if an exception is thrown, there are no changes in the JSON value.

-## Exceptions
-
- Throws [`other_error.502`](../../home/exceptions.md#jsonexceptionother_error502) if `use_type` is true and `use_size`
-  is false.
-
 ## Complexity

 Linear in the size of the JSON value `j`.
@@ -84,7 +79,6 @@ Linear in the size of the JSON value `j`.
 - [to_msgpack](to_msgpack.md) create a MessagePack serialization of a JSON value
 - [to_bson](to_bson.md) create a BSON serialization of a JSON value
 - [to_ubjson](to_ubjson.md) create a UBJSON serialization of a JSON value
- [to_bon8](to_bon8.md) create a BON8 serialization of a JSON value

 ## Version history

@@ -1,76 +0,0 @@
-# <small>nlohmann::basic_json::</small>to_bon8
-
-```cpp
-// (1)
-static std::vector<std::uint8_t> to_bon8(const basic_json& j);
-
-// (2)
-static void to_bon8(const basic_json& j, detail::output_adapter<std::uint8_t> o);
-static void to_bon8(const basic_json& j, detail::output_adapter<char> o);
-```
-
-Serializes a given JSON value `j` to a byte vector using the BON8 (Binary Object Notation 8) serialization format. BON8
-is a compact binary serialization format that stores strings as UTF-8 without a length prefix.
-
-1. Returns a byte vector containing the BON8 serialization.
-2. Writes the BON8 serialization to an output adapter.
-
-The exact mapping and its limitations are described on a [dedicated page](../../features/binary_formats/bon8.md).
-
-## Parameters
-
-`j` (in)
-:   JSON value to serialize
-
-`o` (in)
-:   output adapter to write serialization to
-
-## Return value
-
-1. BON8 serialization as a byte vector
-2. (none)
-
-## Exception safety
-
-Strong guarantee: if an exception is thrown, there are no changes in the JSON value `j`, which is never modified.
-With (2), the bytes written before the exception remain in the output adapter.
-
-## Exceptions
-
- Throws [out_of_range.407](../../home/exceptions.md#jsonexceptionout_of_range407) if `j` contains an unsigned integer
-  above 9223372036854775807, which BON8 cannot represent
- Throws [type_error.316](../../home/exceptions.md#jsonexceptiontype_error316) if `j` contains a string that is not
-  valid UTF-8
-
-## Complexity
-
-Linear in the size of the JSON value `j`.
-
-## Examples
-
-??? example
-
-    The example shows the serialization of a JSON value to a byte vector in BON8 format.
-     
-    ```cpp
-    --8<-- "examples/to_bon8.cpp"
-    ```
-    
-    Output:
-    
-    ```json
-    --8<-- "examples/to_bon8.output"
-    ```
-
-## See also
-
- [from_bon8](from_bon8.md) create a JSON value from an input in BON8 format
- [to_cbor](to_cbor.md) create a CBOR serialization of a JSON value
- [to_msgpack](to_msgpack.md) create a MessagePack serialization of a JSON value
- [to_bson](to_bson.md) create a BSON serialization of a JSON value
- [to_ubjson](to_ubjson.md) create a UBJSON serialization of a JSON value
- [to_bjdata](to_bjdata.md) create a BJData serialization of a JSON value
-
-## Version history
-
- Added in version 3.13.0.
@@ -40,14 +40,10 @@ Strong guarantee: if an exception is thrown, there are no changes in the JSON va
  is not an object; example: `"to serialize to BSON, top-level type must be object, but is string"`
 - Throws [`out_of_range.409`](../../home/exceptions.md#jsonexceptionout_of_range409) if a key in the JSON object contains
  a null byte (code point U+0000); example: `"BSON key cannot contain code point U+0000 (at byte 2)"`
- Throws [`out_of_range.412`](../../home/exceptions.md#jsonexceptionout_of_range412) if the length of a document, array,
-  string, or binary value exceeds the range of the 32-bit BSON length field; example:
-  `"BSON length 2147483661 exceeds maximum of 2147483647"`

 ## Complexity

-Linear in the size of the JSON value `j`. The length prefixes of all nested documents and arrays are computed in one
-pass before anything is written.
+Linear in the size of the JSON value `j`.

 ## Examples

@@ -72,9 +68,7 @@ pass before anything is written.
 - [to_msgpack](to_msgpack.md) create a MessagePack serialization of a JSON value
 - [to_ubjson](to_ubjson.md) create a UBJSON serialization of a JSON value
 - [to_bjdata](to_bjdata.md) create a BJData serialization of a JSON value
- [to_bon8](to_bon8.md) create a BON8 serialization of a JSON value

 ## Version history

 - Added in version 3.4.0.
- Linear in the size of `j`, and no longer limited by the call stack for deeply nested values, since version 3.13.0.
@@ -62,7 +62,6 @@ Linear in the size of the JSON value `j`.
 - [to_bson](to_bson.md) create a BSON serialization of a JSON value
 - [to_ubjson](to_ubjson.md) create a UBJSON serialization of a JSON value
 - [to_bjdata](to_bjdata.md) create a BJData serialization of a JSON value
- [to_bon8](to_bon8.md) create a BON8 serialization of a JSON value

 ## Version history

@@ -34,15 +34,6 @@ The exact mapping and its limitations are described on a [dedicated page](../../

 Strong guarantee: if an exception is thrown, there are no changes in the JSON value.

-## Exceptions
-
- Throws [`out_of_range.412`](../../home/exceptions.md#jsonexceptionout_of_range412) if the length of a string, binary
-  value, array, or object exceeds 4294967295, the maximum MessagePack can store; example:
-  `"MessagePack length 4294967296 exceeds maximum of 4294967295"`
- Throws [`out_of_range.415`](../../home/exceptions.md#jsonexceptionout_of_range415) if the subtype of a binary value
-  exceeds 255, the maximum of the MessagePack ext type; example:
-  `"subtype 70000 is too large for the MessagePack ext type (max 255)"`
-
 ## Complexity

 Linear in the size of the JSON value `j`.
@@ -70,9 +61,7 @@ Linear in the size of the JSON value `j`.
 - [to_bson](to_bson.md) create a BSON serialization of a JSON value
 - [to_ubjson](to_ubjson.md) create a UBJSON serialization of a JSON value
 - [to_bjdata](to_bjdata.md) create a BJData serialization of a JSON value
- [to_bon8](to_bon8.md) create a BON8 serialization of a JSON value

 ## Version history

 - Added in version 2.0.9.
- Throws `out_of_range.412` and `out_of_range.415` since version 3.13.0.
@@ -45,11 +45,6 @@ The exact mapping and its limitations are described on a [dedicated page](../../

 Strong guarantee: if an exception is thrown, there are no changes in the JSON value.

-## Exceptions
-
- Throws [`other_error.502`](../../home/exceptions.md#jsonexceptionother_error502) if `use_type` is true and `use_size`
-  is false.
-
 ## Complexity

 Linear in the size of the JSON value `j`.
@@ -77,7 +72,6 @@ Linear in the size of the JSON value `j`.
 - [to_msgpack](to_msgpack.md) create a MessagePack serialization of a JSON value
 - [to_bson](to_bson.md) create a BSON serialization of a JSON value
 - [to_bjdata](to_bjdata.md) create a BJData serialization of a JSON value
- [to_bon8](to_bon8.md) create a BON8 serialization of a JSON value

 ## Version history

@@ -47,10 +47,6 @@ Constant.
    --8<-- "examples/type.output"
    ```

-## See also
-
- [basic_json_view::type](../basic_json_view/type.md) - the same function on a zero-copy view
-
 ## Version history

 - Added in version 1.0.0.
@@ -52,11 +52,6 @@ Constant.
    --8<-- "examples/type_name.output"
    ```

-## See also
-
- [type](type.md) - return the type of the JSON value
- [basic_json_view::type_name](../basic_json_view/type_name.md) - the same function on a zero-copy view
-
 ## Version history

 - Added in version 1.0.0.
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Niels Lohmann	0e03ecee10	Extend memcpy fast path to sized sentinels (e.g. std::counted_iterator) Extend the memcpy fast path in iterator_input_adapter to sized sentinels of a different type, not just same-type iterator pairs. std::counted_iterator paired with std::default_sentinel_t already satisfies std::contiguous_iterator and std::sized_sentinel_for, so std::ranges::distance (C++20) lets that combination reach the fast path too, instead of silently falling back to the byte-by-byte path. - iterator_is_contiguous now also allows std::sized_sentinel_for<SentinelType, IteratorType> under C++20, gated the same way as the existing std::contiguous_iterator detection. - get_elements_impl's fast path uses std::ranges::distance under C++20 (works for both same-type and sized-sentinel pairs) and falls back to std::distance pre-C++20, where SentinelType is always IteratorType. - Add a C++20-only test exercising json::parse/accept with std::counted_iterator + std::default_sentinel_t. - Document std::default_sentinel_t + std::counted_iterator as a SentinelType example across parse.md, accept.md, sax_parse.md, and the five from_*.md pages, replacing an earlier ambiguously worded bullet. Addresses review feedback: https://github.com/nlohmann/json/pull/5265#discussion_r3564237584 Signed-off-by: Niels Lohmann <mail@nlohmann.me>	2026-07-11 16:26:09 +02:00
Niels Lohmann	d23806a327	Fix clang-tidy misc-const-correctness in heterogeneous sentinel test json_str is only read via .data()/.size() and never reassigned, so clang-tidy correctly flags it as const-able. Verified against the exact CI job (silkeh/clang:dev, ci_clang_tidy target) by running clang-tidy directly on this file plus the five binary-format sentinel tests touched by prior commits; all are now clean. Signed-off-by: Niels Lohmann <mail@nlohmann.me>	2026-07-11 10:06:11 +02:00
Niels Lohmann	fa9741f0ce	Fix clang-tidy hicpp-named-parameter and misc-const-correctness - Drop the unused reversed-order operator!= overload from utils::istreambuf_sentinel (only iterator != sentinel is ever evaluated) and name the remaining friend's sentinel parameter, fixing hicpp-named-parameter/readability-named-parameter. - Mark the istreambuf_iterator first/last helper variable const in the five binary-format sentinel tests, fixing misc-const-correctness. Signed-off-by: Niels Lohmann <mail@nlohmann.me>	2026-07-11 00:10:23 +02:00
Niels Lohmann	da95d1184e	Fix -Wunneeded-internal-declaration for CustomSentinel in test CustomSentinel lives in an anonymous namespace (internal linkage), and the library's parse loop only ever evaluates the iterator-first direction (it != last), so the reversed-order friend operator!= was never referenced. Clang's -Weverything flags such unused internal declarations as an error. Drop the unused overload; the used direction is enough to satisfy can_compare_ne's either-order detection. Signed-off-by: Niels Lohmann <mail@nlohmann.me>	2026-07-10 23:25:21 +02:00
Niels Lohmann	146e5e0bc7	Merge iterator+sentinel overloads and fix ambiguity/CI issues Address PR review feedback and CI failures: - Merge the separate same-type and sentinel-type iterator overloads of parse(), accept(), sax_parse(), and the five from_* binary deserializers into a single overload with SentinelType defaulted to IteratorType, as suggested in review. Applied the same simplification to the detail::input_adapter() free functions. - Fix a latent ambiguity: some compilers (e.g. GCC 4.8) unreliably SFINAE the operator!= detection for std::nullptr_t against container/string types, making calls like parse(s, nullptr, ...) ambiguous with the compatible-input overload. can_compare_ne now explicitly excludes std::nullptr_t as a SentinelType. - Use a named enable_if_t template parameter instead of an unnamed function parameter for the SFINAE guard, fixing a clang-tidy hicpp-named-parameter/readability-named-parameter failure. - Update parse.md, accept.md, sax_parse.md, and the five from_*.md pages to document the merged overload instead of separate (2)/(3) overloads, also fixing an over-160-char line that broke the documentation style_check CI job. - Rework the BSON iterator+sentinel test to parse a BSON file already present in the test suite instead of writing/deleting a temp file. Signed-off-by: Niels Lohmann <mail@nlohmann.me>	2026-07-10 23:15:17 +02:00
Niels Lohmann	2269656bc6	Add iterator+sentinel tests and docs for binary deserializers This commit extends the C++20 ranges support (iterator+sentinel pairs) to the binary format deserializers from_cbor, from_msgpack, from_ubjson, from_bjdata, and from_bson, matching what was already done for parse(), accept(), and sax_parse(). Changes: - Add istreambuf_sentinel helper to test_utils.hpp for EOF detection in tests - Add 5 new test cases that read binary files directly via std::istreambuf_iterator<char> + sentinel, without pre-buffering - Update documentation for all 5 from_* functions to document overload (3) with SentinelType parameter - All tests pass; verified against existing test suite data - Fix potential buffer over-read warning in heterogeneous iterator test Signed-off-by: Niels Lohmann <mail@nlohmann.me>	2026-07-10 19:50:04 +02:00