Fix 32-bit overflow in huge_string_t BSON length-overflow tests

huge_string_t doubles as basic_json's StringType, so it is used not only
for the JSON string value under test but also for object keys (e.g. "s",
"nested"). Making size() unconditionally lie about being huge therefore
inflated the keys' reported sizes as well, pushing the running totals
computed while walking the BSON document (calc_bson_object_size and
friends in binary_writer.hpp) past what a 32-bit std::size_t can hold.

On 64-bit platforms this happens to still produce a working (if
needlessly large) result, but on 32-bit platforms (e.g. the mingw x86 CI
job) the size_t arithmetic silently wraps around: for the "document" test
this merely surfaces the wrong number in the exception message, but for
the "string" test the wrapped total happens to fall back under
INT32_MAX, so the intended out_of_range.412 guard is skipped entirely and
the code goes on to actually write ~2 GiB worth of characters from the
key's real, tiny buffer - which is what raised the reported
"vector::_M_range_insert" exception instead of a controlled 412.

Make the fake-huge size opt-in via huge_string_t::as_huge() and only
apply it to the string value under test, leaving keys at their real
(small) size. This keeps every intermediate size well within 32-bit
size_t range on any platform, matching how huge_binary_t already avoids
the same trap (it is only ever used as the BSON value type, never as a
key). Expected out_of_range.412 messages are updated accordingly.

Signed-off-by: Niels Lohmann <mail@nlohmann.me>

.github/workflows/ubuntu.yml

@@ -100,7 +100,7 @@ jobs:
     container: ubuntu:focal
     strategy:
       matrix:
-        target: [ci_cmake_flags, ci_test_diagnostics, ci_test_diagnostic_positions, ci_test_noexceptions, ci_test_noimplicitconversions, ci_test_legacycomparison, ci_test_noglobaludls, ci_test_disableenumserialization, ci_test_skiplibraryversioncheck]
+        target: [ci_cmake_flags, ci_test_diagnostics, ci_test_diagnostic_positions, ci_test_noexceptions, ci_test_noimplicitconversions, ci_test_legacycomparison, ci_test_noglobaludls]
     steps:
       - name: Install build-essential
         run: apt-get update ; apt-get install -y build-essential unzip wget git libssl-dev

cmake/ci.cmake

@@ -242,40 +242,6 @@ add_custom_target(ci_test_noglobaludls
     COMMENT "Compile and test with global UDLs disabled"
 )
 
-###############################################################################
-# Disable enum serialization.
-###############################################################################
-
-add_custom_target(ci_test_disableenumserialization
-    COMMAND ${CMAKE_COMMAND}
-    -DCMAKE_BUILD_TYPE=Debug -GNinja
-    -DJSON_BuildTests=ON -DJSON_FastTests=ON -DJSON_DisableEnumSerialization=ON
-    -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_disableenumserialization
-    COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_disableenumserialization
-    COMMAND cd ${PROJECT_BINARY_DIR}/build_disableenumserialization && ${CMAKE_CTEST_COMMAND} --parallel ${N} --output-on-failure
-    COMMENT "Compile and test with enum serialization disabled"
-)
-
-###############################################################################
-# Skip the multiple-inclusion library version check.
-###############################################################################
-
-# tests/src/skip_library_version_check.cpp deliberately simulates a scenario
-# (mixing two differently-versioned inclusions of the library in one
-# translation unit) that unavoidably triggers the compiler's own "macro
-# redefined" warning, so -- unlike the ci_test_* targets above -- it is
-# compiled directly here, with a modest warning set, instead of being folded
-# into the library's own -Weverything/-Werror unit test matrix.
-add_custom_target(ci_test_skiplibraryversioncheck
-    COMMAND ${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/skip_library_version_check
-    COMMAND ${CMAKE_CXX_COMPILER} -std=c++11 -Wall -Wextra
-        -I${PROJECT_SOURCE_DIR}/include
-        ${PROJECT_SOURCE_DIR}/tests/src/skip_library_version_check.cpp
-        -o ${PROJECT_BINARY_DIR}/skip_library_version_check/skip_library_version_check
-    COMMAND ${PROJECT_BINARY_DIR}/skip_library_version_check/skip_library_version_check
-    COMMENT "Compile and run a translation unit simulating a mismatched library version, with JSON_SKIP_LIBRARY_VERSION_CHECK defined"
-)
-
 ###############################################################################
 # Coverage.
 ###############################################################################

tests/src/skip_library_version_check.cpp

@@ -1,61 +0,0 @@
-//     __ _____ _____ _____
-//  __|  |   __|     |   | |  JSON for Modern C++ (supporting code)
-// |  |  |__   |  |  | | | |  version 3.12.0
-// |_____|_____|_____|_|___|  https://github.com/nlohmann/json
-//
-// SPDX-FileCopyrightText: 2013-2026 Niels Lohmann <https://nlohmann.me>
-// SPDX-License-Identifier: MIT
-
-// Standalone compile-and-run check for the JSON_SKIP_LIBRARY_VERSION_CHECK
-// configuration macro, which (per #5423) was never exercised anywhere in the
-// test matrix.
-//
-// include/nlohmann/detail/abi_macros.hpp normally emits a #warning if
-// NLOHMANN_JSON_VERSION_MAJOR/MINOR/PATCH are already defined (as they would
-// be by an earlier inclusion of a different version of the library) with
-// values that mismatch the version about to be defined -- unless
-// JSON_SKIP_LIBRARY_VERSION_CHECK is defined, in which case the check (and
-// that #warning) is skipped.
-//
-// This file deliberately is not named tests/src/unit-*.cpp: it is compiled
-// directly (with a modest, non-strict warning set) by the dedicated
-// ci_test_skiplibraryversioncheck target in cmake/ci.cmake, rather than being
-// folded into the library's own -Weverything/-Werror unit test matrix. That
-// is because the scenario simulated here -- mixing two different, already
-// differently-versioned inclusions of the library in one translation unit --
-// unavoidably also triggers the *compiler's own* "macro redefined" warning,
-// independent of (and unaffected by) JSON_SKIP_LIBRARY_VERSION_CHECK, which
-// only ever silences the library's own #warning. Building this file under
-// -Weverything -Werror would therefore fail for a reason unrelated to the
-// macro under test.
-#define NLOHMANN_JSON_VERSION_MAJOR 0
-#define NLOHMANN_JSON_VERSION_MINOR 0
-#define NLOHMANN_JSON_VERSION_PATCH 0
-
-#define JSON_SKIP_LIBRARY_VERSION_CHECK 1
-
-#include <nlohmann/json.hpp>
-
-int main()
-{
-    // reaching this point at all already proves that the mismatched,
-    // pre-defined version macros above did not stop compilation -- which is
-    // exactly what JSON_SKIP_LIBRARY_VERSION_CHECK is for. The library must
-    // also still be fully usable.
-    const nlohmann::json j = {{"a", 1}, {"b", {1, 2, 3}}};
-    if (j.dump() != "{\"a\":1,\"b\":[1,2,3]}")
-    {
-        return 1;
-    }
-
-    // include/nlohmann/detail/abi_macros.hpp unconditionally (re)defines the
-    // version macros to the library's real, current version right after the
-    // (here, skipped) mismatch check, regardless of the deliberately wrong
-    // stand-in values defined above.
-    if (NLOHMANN_JSON_VERSION_MAJOR == 0 && NLOHMANN_JSON_VERSION_MINOR == 0 && NLOHMANN_JSON_VERSION_PATCH == 0)
-    {
-        return 1;
-    }
-
-    return 0;
-}

tests/src/unit-bson.cpp

@@ -38,6 +38,54 @@ class huge_binary_t : public std::vector<std::uint8_t>
 using huge_binary_json = nlohmann::basic_json <
                          std::map, std::vector, std::string, bool, std::int64_t, std::uint64_t,
                          double, std::allocator, nlohmann::adl_serializer, huge_binary_t, void >;
+
+// a string type that can be made to report a size beyond INT32_MAX without
+// allocating that much memory, so BSON length overflow can be tested for
+// strings and (embedded) documents as well, following the same idea as
+// huge_binary_t.
+//
+// Unlike huge_binary_t (which is only ever used as the BSON *value* type),
+// this type doubles as basic_json's StringType and is therefore also used
+// for *object keys* (e.g. "s" or "nested" below). Only the designated test
+// value is meant to lie about its size - if every huge_string_t (including
+// keys) reported a huge size, the running totals computed while walking the
+// BSON document (see calc_bson_object_size & friends in binary_writer.hpp)
+// would need more than 32 bits, and on platforms where std::size_t is only
+// 32 bits wide that arithmetic would silently wrap around, producing wrong
+// (or even unguarded) lengths. The fake size is therefore opt-in via
+// as_huge(), and plain strings - in particular object keys - keep reporting
+// their real, small size.
+class huge_string_t : public std::string
+{
+  public:
+    using std::string::string;
+    huge_string_t(const std::string& s) : std::string(s) {} // NOLINT(google-explicit-constructor,hicpp-explicit-conversions)
+
+    // returns a copy of @a s whose size() pretends to be huge
+    static huge_string_t as_huge(const std::string& s)
+    {
+        huge_string_t result(s);
+        result.pretend_huge = true;
+        return result;
+    }
+
+    size_type size() const noexcept
+    {
+        if (pretend_huge)
+        {
+            // one byte more than the BSON length field can represent
+            return static_cast<size_type>((std::numeric_limits<std::int32_t>::max)()) + 1;
+        }
+        return std::string::size();
+    }
+
+  private:
+    bool pretend_huge = false;
+};
+
+using huge_string_json = nlohmann::basic_json <
+                         std::map, std::vector, huge_string_t, bool, std::int64_t, std::uint64_t,
+                         double, std::allocator, nlohmann::adl_serializer, std::vector<std::uint8_t>, void >;
 } // namespace
 
 TEST_CASE("BSON")
@@ -105,10 +153,36 @@ TEST_CASE("BSON")
 
     SECTION("lengths exceeding INT32_MAX cannot be serialized to BSON")
     {
-        huge_binary_json j;
-        j["b"] = huge_binary_json::binary(huge_binary_t{});
+        // out_of_range.412 is thrown from a single shared helper
+        // (to_bson_length) that guards the BSON length fields of binary
+        // values, strings, and (embedded) documents alike
+        SECTION("binary")
+        {
+            huge_binary_json j;
+            j["b"] = huge_binary_json::binary(huge_binary_t{});
 
-        CHECK_THROWS_WITH_AS(huge_binary_json::to_bson(j), "[json.exception.out_of_range.412] BSON length 2147483661 exceeds maximum of 2147483647", huge_binary_json::out_of_range&);
+            CHECK_THROWS_WITH_AS(huge_binary_json::to_bson(j), "[json.exception.out_of_range.412] BSON length 2147483661 exceeds maximum of 2147483647", huge_binary_json::out_of_range&);
+        }
+
+        SECTION("string")
+        {
+            huge_string_json j;
+            j["s"] = huge_string_t::as_huge("value");
+
+            CHECK_THROWS_WITH_AS(huge_string_json::to_bson(j), "[json.exception.out_of_range.412] BSON length 2147483661 exceeds maximum of 2147483647", huge_string_json::out_of_range&);
+        }
+
+        SECTION("document")
+        {
+            // an oversized string nested one level deep makes the
+            // *embedded* document's own length exceed INT32_MAX as well
+            huge_string_json nested;
+            nested["s"] = huge_string_t::as_huge("value");
+            huge_string_json j;
+            j["nested"] = nested;
+
+            CHECK_THROWS_WITH_AS(huge_string_json::to_bson(j), "[json.exception.out_of_range.412] BSON length 2147483674 exceeds maximum of 2147483647", huge_string_json::out_of_range&);
+        }
     }
 
     SECTION("string length must be at least 1")
@@ -193,6 +267,23 @@ TEST_CASE("BSON")
             CHECK(json::from_bson(result, true, false) == j);
         }
 
+        SECTION("non-empty object with bool from a non-0/1 byte (lenient parsing)")
+        {
+            // documented lenient behavior (see gh-5333): any non-zero byte
+            // is accepted as `true`, not just 0x01
+            std::vector<std::uint8_t> const input =
+            {
+                0x0D, 0x00, 0x00, 0x00, // size (little endian)
+                0x08,               // entry: boolean
+                'e', 'n', 't', 'r', 'y', '\x00',
+                0x02,           // value = 0x02 (neither 0x00 nor 0x01)
+                0x00                    // end marker
+            };
+
+            const json expected = { { "entry", true } };
+            CHECK(json::from_bson(input) == expected);
+        }
+
         SECTION("non-empty object with double")
         {
             json const j =
@@ -499,6 +590,29 @@ TEST_CASE("BSON")
             CHECK(json::from_bson(result, true, false) == j);
         }
 
+        SECTION("array elements with non-conforming keys (lenient parsing)")
+        {
+            // documented lenient behavior (see gh-5333): BSON array element
+            // keys are not checked against the required decimal sequence
+            // "0", "1", "2", ... - elements are taken in encoded order
+            std::vector<std::uint8_t> const input =
+            {
+                0x26, 0x00, 0x00, 0x00, // size (little endian)
+                0x04, 'e', 'n', 't', 'r', 'y', '\x00', // entry: embedded array
+
+                0x1A, 0x00, 0x00, 0x00, // size (little endian)
+                0x10, '5', 0x00, 0x0A, 0x00, 0x00, 0x00, // key "5" (bogus)      -> 10
+                0x10, 'x', 0x00, 0x14, 0x00, 0x00, 0x00, // key "x" (non-numeric) -> 20
+                0x10, '1', 0x00, 0x1E, 0x00, 0x00, 0x00, // key "1" (out of order) -> 30
+                0x00, // end marker (embedded array)
+
+                0x00 // end marker
+            };
+
+            const json expected = { { "entry", json::array({10, 20, 30}) } };
+            CHECK(json::from_bson(input) == expected);
+        }
+
         SECTION("non-empty object with binary member")
         {
             const size_t N = 10;
@@ -594,6 +708,31 @@ TEST_CASE("BSON")
             CHECK(json::from_bson(result, true, false) == j);
         }
 
+        SECTION("binary member with subtype 0x02 (old binary) keeps its inner length prefix (lenient parsing)")
+        {
+            // documented lenient behavior (see gh-5333): the payload for
+            // binary subtype 0x02 ("old binary") is returned as-is,
+            // including its own inner 4-byte length prefix; it is not
+            // stripped or reinterpreted
+            std::vector<std::uint8_t> const input =
+            {
+                0x17, 0x00, 0x00, 0x00, // size (little endian)
+                0x05, 'e', 'n', 't', 'r', 'y', '\x00', // entry: binary
+
+                0x06, 0x00, 0x00, 0x00, // size of binary (little endian)
+                0x02, // "old binary" subtype
+                0x02, 0x00, 0x00, 0x00, // inner length prefix (part of the old-binary payload)
+                0x68, 0x69, // payload ('h', 'i')
+
+                0x00 // end marker
+            };
+
+            // the inner length prefix is part of the (unmodified) payload
+            const std::vector<std::uint8_t> expected_payload = {0x02, 0x00, 0x00, 0x00, 0x68, 0x69};
+            const json expected = { { "entry", json::binary(expected_payload, 0x02) } };
+            CHECK(json::from_bson(input) == expected);
+        }
+
         SECTION("Some more complex document")
         {
             json const j =

tests/src/unit-byte_container_with_subtype.cpp

@@ -42,39 +42,6 @@ TEST_CASE("byte_container_with_subtype")
         CHECK(container.subtype() == static_cast<subtype_type>(-1));
     }
 
-    SECTION("move semantics")
-    {
-        // the rvalue-reference constructor (without a subtype) must actually move
-        // the passed-in container rather than copy it; comparing the buffer address
-        // before and after is a stronger check than just observing the source is
-        // empty afterward, since a copy-then-clear could also leave it empty
-        {
-            std::vector<std::uint8_t> bytes = {{0xCA, 0xFE, 0xBA, 0xBE}};
-            const auto* const data_ptr = bytes.data();
-
-            nlohmann::byte_container_with_subtype<std::vector<std::uint8_t>> container(std::move(bytes));
-
-            CHECK(container.size() == 4);
-            CHECK(container.data() == data_ptr);
-            CHECK(!container.has_subtype());
-            CHECK(bytes.empty()); // NOLINT(bugprone-use-after-move,clang-analyzer-cplusplus.Move,hicpp-invalid-access-moved)
-        }
-
-        // same check for the rvalue-reference constructor that also takes a subtype
-        {
-            std::vector<std::uint8_t> bytes = {{0xCA, 0xFE, 0xBA, 0xBE}};
-            const auto* const data_ptr = bytes.data();
-
-            nlohmann::byte_container_with_subtype<std::vector<std::uint8_t>> container(std::move(bytes), 42);
-
-            CHECK(container.size() == 4);
-            CHECK(container.data() == data_ptr);
-            CHECK(container.has_subtype());
-            CHECK(container.subtype() == 42);
-            CHECK(bytes.empty()); // NOLINT(bugprone-use-after-move,clang-analyzer-cplusplus.Move,hicpp-invalid-access-moved)
-        }
-    }
-
     SECTION("comparisons")
     {
         std::vector<std::uint8_t> const bytes = {{0xCA, 0xFE, 0xBA, 0xBE}};

tests/src/unit-conversions.cpp

@@ -1761,40 +1761,6 @@ TEST_CASE("std::filesystem::path")
 }
 #endif
 
-// the ADL to_json overload for std::u8string only exists under the same guard
-// as std::filesystem::path support (it is otherwise only reached indirectly,
-// via std::filesystem::path::u8string()) -- mirror both #if conditions from
-// include/nlohmann/detail/conversions/to_json.hpp exactly
-#if JSON_HAS_FILESYSTEM || JSON_HAS_EXPERIMENTAL_FILESYSTEM
-#if defined(__cpp_lib_char8_t)
-TEST_CASE("std::u8string")
-{
-    SECTION("ascii")
-    {
-        const std::u8string s = u8"Path";
-        json const j = s;
-
-        CHECK(j.template get<std::string>() == "Path");
-    }
-
-    SECTION("utf-8")
-    {
-        // use \u universal-character-names (rather than raw \x byte escapes
-        // or literal non-ASCII source bytes) to compose the multi-byte UTF-8
-        // encoding -- MSVC treats \x escapes used that way inside a u8
-        // literal as a nonstandard extension (warning C5321), which some of
-        // our CI configs promote to an error; \u is portable and produces
-        // the exact same encoded bytes without depending on the source
-        // file's encoding
-        const std::u8string s = u8"P\u011B\u0161ina";
-        json const j = s;
-
-        CHECK(j.template get<std::string>() == "P\xc4\x9b\xc5\xa1ina");
-    }
-}
-#endif
-#endif
-
 TEST_CASE("std::optional")
 {
     SECTION("null")

tests/src/unit-json_patch.cpp

@@ -672,102 +672,6 @@ TEST_CASE("JSON patch")
         }
     }
 
-    SECTION("patch_inplace")
-    {
-        SECTION("happy path: patch_inplace mirrors patch() on success")
-        {
-            // mirrors "A.5. Replacing a Value" above, but applies the patch with
-            // patch_inplace() to a mutable copy instead of using patch()'s
-            // returned copy
-            json doc = R"(
-                    {
-                        "baz": "qux",
-                        "foo": "bar"
-                    }
-                )"_json;
-
-            json const patch = R"(
-                    [
-                        { "op": "replace", "path": "/baz", "value": "boo" }
-                    ]
-                )"_json;
-
-            json const expected = R"(
-                    {
-                        "baz": "boo",
-                        "foo": "bar"
-                    }
-                )"_json;
-
-            doc.patch_inplace(patch);
-            CHECK(doc == expected);
-        }
-
-        // this test relies on the "test" operation actually throwing so the
-        // partial-application state can be observed right after the throw
-        // point; under JSON_NOEXCEPTION, JSON_THROW() calls std::abort()
-        // instead (there is no C++ exception to throw), and doctest's
-        // CHECK_THROWS_AS() is compiled out to a no-op that never even
-        // invokes the given expression (see doctest's "--no-throw" test
-        // filter, which ci_test_noexceptions passes) -- so patch()/
-        // patch_inplace() would never be called at all and the follow-up
-        // state assertions below would fail against the untouched original
-#if !defined(JSON_NOEXCEPTION)
-        SECTION("distinguishing contract vs patch(): partial application on failure")
-        {
-            // Unlike patch(), which is all-or-nothing because it applies the
-            // patch to an internal copy that is simply discarded when an
-            // exception is thrown (leaving the original untouched no matter
-            // what), patch_inplace() mutates the document it is called on
-            // directly and immediately, operation by operation. So if a JSON
-            // Patch fails partway through, whatever operations already
-            // succeeded remain applied -- the document is left in a partially
-            // patched state. This is empirically verified current behavior,
-            // not just documented intent, and is pinned here as such.
-            json const original = R"(
-                    {
-                        "baz": "qux",
-                        "foo": "bar"
-                    }
-                )"_json;
-
-            // the first operation ("replace") succeeds; the second ("test")
-            // fails because the value at "/baz" no longer (and never did)
-            // equal "not boo"
-            json const patch = R"(
-                    [
-                        { "op": "replace", "path": "/baz", "value": "boo" },
-                        { "op": "test", "path": "/baz", "value": "not boo" }
-                    ]
-                )"_json;
-
-            // patch() never modifies the object it is called on -- it always
-            // operates on (and returns) a separate copy, so the original is
-            // left completely untouched, regardless of success or failure.
-            // copy_for_patch is intentionally a real copy, not a reference
-            // to `original`: the whole point of this check is to catch a
-            // hypothetical future regression where patch() *does* mutate its
-            // receiver. Using a reference here would make the assertion
-            // below compare `original` to itself -- trivially true even if
-            // such a bug existed -- which is exactly what a static analyzer
-            // can't see when it suggests "this copy is never modified, use
-            // a reference instead".
-            json copy_for_patch = original; // NOLINT(performance-unnecessary-copy-initialization)
-            CHECK_THROWS_AS(copy_for_patch.patch(patch), json::other_error&);
-            CHECK(copy_for_patch == original);
-
-            // patch_inplace(), in contrast, already applied the successful
-            // "replace" operation to the document before the "test" operation
-            // threw -- that change is not rolled back
-            json doc = original;
-            CHECK_THROWS_AS(doc.patch_inplace(patch), json::other_error&);
-            CHECK(doc != original);
-            CHECK(doc.at("baz") == "boo");
-            CHECK(doc.at("foo") == "bar");
-        }
-#endif // !defined(JSON_NOEXCEPTION)
-    }
-
     SECTION("errors")
     {
         SECTION("unknown operation")

tests/src/unit-no-mem-leak-on-adl-serialize.cpp

@@ -70,7 +70,7 @@ TEST_CASE("check_for_mem_leak_on_adl_to_json-2")
     }
 }
 
-TEST_CASE("check_for_mem_leak_on_adl_to_json-3")
+TEST_CASE("check_for_mem_leak_on_adl_to_json-2")
 {
     try
     {

tests/src/unit-no_io_and_user_exceptions.cpp

@@ -1,91 +0,0 @@
-//     __ _____ _____ _____
-//  __|  |   __|     |   | |  JSON for Modern C++ (supporting code)
-// |  |  |__   |  |  | | | |  version 3.12.0
-// |_____|_____|_____|_|___|  https://github.com/nlohmann/json
-//
-// SPDX-FileCopyrightText: 2013-2026 Niels Lohmann <https://nlohmann.me>
-// SPDX-License-Identifier: MIT
-
-// This translation unit is a dedicated, small compile-and-run check for two
-// configuration macros that (per #5423) were never exercised anywhere in the
-// test matrix:
-// - JSON_NO_IO, which removes the library's <istream>/<ostream> support
-//   (operator<<, operator>>, and the stream-based overloads of dump()/parse())
-// - the JSON_THROW_USER / JSON_TRY_USER / JSON_CATCH_USER trio, which lets a
-//   user replace the library's internal exception handling
-//
-// Both macros are about excluding/replacing a facility the library would
-// otherwise pull in on its own, and defining one has no bearing on the other,
-// so -- to keep the test matrix small -- they are exercised together in a
-// single dedicated file instead of two.
-//
-// JSON_NO_IO requires this file itself to never rely on <iostream>/<sstream>;
-// only string-based parsing/dumping is used below.
-#define JSON_NO_IO 1
-
-// The user-supplied exception macros below are a *conforming* replacement:
-// they simply forward to the real throw/try/catch keywords (via a counter so
-// the test can assert each macro was actually invoked, not just defined), so
-// every exception-related behavior the library relies on internally --
-// including rethrowing std::out_of_range as json::out_of_range in at() --
-// keeps working exactly as it would with the library's own default macros.
-static int json_throw_user_call_count = 0; // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)
-
-#define JSON_THROW_USER(exception) do { ++json_throw_user_call_count; throw exception; } while (false) // NOLINT(cppcoreguidelines-macro-usage)
-#define JSON_TRY_USER try // NOLINT(cppcoreguidelines-macro-usage)
-#define JSON_CATCH_USER(exception) catch (exception) // NOLINT(cppcoreguidelines-macro-usage)
-
-#include "doctest_compatibility.h"
-
-#include <nlohmann/json.hpp>
-using json = nlohmann::json;
-
-TEST_CASE("JSON_NO_IO")
-{
-    // everything that does not touch <istream>/<ostream> must keep working:
-    // parsing from and dumping to std::string
-    const json j = json::parse("{\"a\":[1,2,3],\"b\":true}");
-    CHECK(j.dump() == "{\"a\":[1,2,3],\"b\":true}");
-    CHECK(j.at("a").size() == 3);
-    CHECK(j.at("b").get<bool>() == true);
-}
-
-// this test relies on CHECK_THROWS_AS() actually invoking the guarded
-// expression so json_throw_user_call_count gets bumped and can be observed
-// afterwards; doctest's "--no-throw" test filter (which ci_test_noexceptions
-// passes, together with a global -DJSON_NOEXCEPTION added to CMAKE_CXX_FLAGS
-// for every translation unit in that build, this file included) compiles
-// CHECK_THROWS_AS() out to a no-op that never even invokes the given
-// expression -- so json::parse()/at() below would never be called at all and
-// the call-count assertions would fail even though our JSON_THROW_USER
-// override (which always really throws, regardless of JSON_NOEXCEPTION) would
-// have worked fine on its own
-#if !defined(JSON_NOEXCEPTION)
-TEST_CASE("JSON_THROW_USER, JSON_TRY_USER, JSON_CATCH_USER")
-{
-    json_throw_user_call_count = 0;
-
-    // json::parse() is [[nodiscard]] (JSON_HEDLEY_WARN_UNUSED_RESULT); under
-    // GCC in C++11 mode that expands to __attribute__((warn_unused_result)),
-    // which -- unlike a [[nodiscard]] attribute proper -- GCC does not
-    // consider satisfied by doctest's CHECK_THROWS_AS() wrapping the
-    // expression in a (void) cast, so the discarded return value would still
-    // be flagged under -Werror=unused-result; assign it to discard it instead,
-    // matching the established `json _ = json::parse(...)` pattern used
-    // elsewhere in the test suite (see unit-class_parser.cpp)
-    json _; // NOLINT(readability-identifier-naming)
-
-    // a parse error goes through JSON_THROW directly, i.e., through our
-    // JSON_THROW_USER override
-    CHECK_THROWS_AS(_ = json::parse("this is not JSON"), json::parse_error&);
-    CHECK(json_throw_user_call_count > 0);
-
-    // at() on an out-of-range array index internally catches std::out_of_range
-    // (JSON_TRY_USER/JSON_CATCH_USER) and rethrows it as json::out_of_range
-    // (JSON_THROW_USER again), so this exercises all three macros together
-    const int count_before = json_throw_user_call_count;
-    const json arr = json::array({1, 2, 3});
-    CHECK_THROWS_AS(arr.at(10), json::out_of_range&);
-    CHECK(json_throw_user_call_count > count_before);
-}
-#endif

tests/src/unit-regression2.cpp

@@ -18,14 +18,6 @@
 // for some reason including this after the json header leads to linker errors with VS 2017...
 #include <locale>
 
-// skip tests if JSON_DisableEnumSerialization=ON (#4384): std::byte is a
-// scoped enum, so get<std::byte>() (needed below to get<std::vector<std::byte>>()
-// from a plain JSON array, not just from an already-binary value) relies on
-// enum serialization being enabled
-#if defined(JSON_DISABLE_ENUM_SERIALIZATION) && (JSON_DISABLE_ENUM_SERIALIZATION == 1)
-    #define SKIP_TESTS_FOR_ENUM_SERIALIZATION
-#endif
-
 #define JSON_TESTS_PRIVATE
 #include <nlohmann/json.hpp>
 using json = nlohmann::json;
@@ -1144,7 +1136,6 @@ TEST_CASE("regression tests 2")
         CHECK((decoded == json_4804::array()));
     }
 
-#ifndef SKIP_TESTS_FOR_ENUM_SERIALIZATION
     SECTION("discussion #4209 - custom BinaryType direct assignment and round-tripping")
     {
         // Test that assigning a custom BinaryType directly creates a binary value, not an array
@@ -1178,7 +1169,6 @@ TEST_CASE("regression tests 2")
         CHECK(extracted[1] == std::byte{2});
         CHECK(extracted[2] == std::byte{3});
     }
-#endif
 
     SECTION("issue #5046 - implicit conversion of return json to std::optional no longer implicit")
     {

tests/src/unit-std-format.cpp

@@ -52,23 +52,6 @@ TEST_CASE("std::formatter<nlohmann::json>")
         CHECK(std::format("{:2}", j) == j.dump(2));
         CHECK(std::format("{:#2}", j) == j.dump(2));
         CHECK(std::format("{:8}", j) == j.dump(8));
-        // multi-digit widths must accumulate every digit, not just the first
-        CHECK(std::format("{:12}", j) == j.dump(12));
-        CHECK(std::format("{:#12}", j) == j.dump(12));
-        CHECK(std::format("{:10}", j) == j.dump(10));
-    }
-
-    SECTION("bare alignment with no fill character defaults to a space indent character")
-    {
-        const json j = {{"foo", 1}, {"bar", {1, 2, 3}}};
-        // without a preceding fill character, the alignment character itself must not
-        // be mistaken for the indent character -- the default space is kept
-        CHECK(std::format("{:<}", j) == j.dump());
-        CHECK(std::format("{:>}", j) == j.dump());
-        CHECK(std::format("{:^}", j) == j.dump());
-        CHECK(std::format("{:<3}", j) == j.dump(3, ' '));
-        CHECK(std::format("{:>3}", j) == j.dump(3, ' '));
-        CHECK(std::format("{:^3}", j) == j.dump(3, ' '));
     }
 
     SECTION("fill-and-align sets the indent character, like dump(indent, indent_char)")