Stop CBOR indefinite-length strings from recursing per chunk

get_cbor_string() and get_cbor_binary() handled the indefinite-length forms (0x7F and 0x5F) by calling themselves once per chunk. Each chunk therefore cost a native stack frame, and since a chunk may itself be an indefinite- length string, an input of repeated 0x7F bytes reached one frame per input byte: 200,000 of them crash the process with SIGSEGV before a single byte is rejected. This is the same defect as #5104, in a path the container-level work does not touch. Count the open levels instead of recursing through them. That is enough here because every chunk is appended to the same result -- get_bytes() writes at result.size() -- so there is no per-level state to keep. The temporary chunk string and its copy into the result go away with the recursion. The definite-length cases move to get_cbor_string_chunk() and get_cbor_binary_chunk() unchanged, including their error messages, which still name 0x7F and 0x5F because those are handled one level up. Behaviour is unchanged. Comparing against develop over the interesting byte sequences -- empty, single-chunk, nested, over-closed and truncated forms, both strings and byte arrays, and an indefinite-length map key -- produces identical values, error codes, messages and byte offsets. The 200,000-level input now reports parse_error.110 at byte 200001 instead of crashing. Note that nesting these is not valid CBOR: RFC 8949, Section 3.2.3 forbids it. This does not change that either way -- it has always been accepted, and rejecting it is a separate decision (#5317, #5325). Should it be rejected later, that is now one condition on the level counter rather than a change to the control flow. Signed-off-by: Niels Lohmann <mail@nlohmann.me>
Return the parsed value by move from from_cbor() and friends
2026-09-07 16:57:59 +00:00 · 2026-09-07 07:50:27 +02:00 · 2026-09-07 07:50:09 +02:00
9 changed files with 2468 additions and 775 deletions
@@ -996,23 +996,21 @@ class binary_reader
    }

    /*!
-    @brief reads a CBOR string
+    @brief reads a definite-length CBOR string

-    This function first reads starting bytes to determine the expected
-    string length and then copies this number of bytes into a string.
-    Additionally, CBOR's strings with indefinite lengths are supported.
+    Reads everything @ref get_cbor_string accepts except the indefinite-length
+    form, which that function handles itself. The bytes are appended to @a
+    result, so consecutive chunks of an indefinite-length string can be read
+    into the same string.

-    @param[out] result  created string
+    @param[out] result  string the bytes are appended to

    @return whether string creation completed
-    */
-    bool get_cbor_string(string_t& result)
-    {
-        if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::cbor, "string")))
-        {
-            return false;
-        }

+    @pre @a current is not EOF
+    */
+    bool get_cbor_string_chunk(string_t& result)
+    {
        switch (current)
        {
            // UTF-8 string (0x00..0x17 bytes follow)
@@ -1068,20 +1066,6 @@ class binary_reader
                return get_number(input_format_t::cbor, len) && get_string(input_format_t::cbor, len, result);
            }

-            case 0x7F: // UTF-8 string (indefinite length)
-            {
-                while (get() != 0xFF)
-                {
-                    string_t chunk;
-                    if (!get_cbor_string(chunk))
-                    {
-                        return false;
-                    }
-                    result.append(chunk);
-                }
-                return true;
-            }
-
            default:
            {
                auto last_token = get_token_string();
@@ -1092,23 +1076,82 @@ class binary_reader
    }

    /*!
-    @brief reads a CBOR byte array
+    @brief reads a CBOR string

    This function first reads starting bytes to determine the expected
-    byte array length and then copies this number of bytes into the byte array.
-    Additionally, CBOR's byte arrays with indefinite lengths are supported.
+    string length and then copies this number of bytes into a string.
+    Additionally, CBOR's strings with indefinite lengths are supported.

-    @param[out] result  created byte array
+    @param[out] result  created string
+
+    @return whether string creation completed
+    */
+    bool get_cbor_string(string_t& result)
+    {
+        // number of indefinite-length strings that have been opened and not
+        // closed yet. RFC 8949, Section 3.2.3 does not permit nesting them,
+        // but this reader has always accepted it, so the open levels are
+        // counted instead of recursed through, which overflowed the stack for
+        // an input of repeated 0x7F bytes (see #5104). Every chunk is appended
+        // to the same result, so no per-level state is needed.
+        std::size_t open = 0;
+
+        while (true)
+        {
+            if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::cbor, "string")))
+            {
+                return false;
+            }
+
+            if (current == 0x7F) // UTF-8 string (indefinite length)
+            {
+                ++open;
+                get();
+                continue;
+            }
+
+            // a break marker closes the innermost indefinite-length string;
+            // outside of one it is not a string and falls through to the error
+            if (open != 0 && current == 0xFF)
+            {
+                if (--open == 0)
+                {
+                    return true;
+                }
+                get();
+                continue;
+            }
+
+            if (JSON_HEDLEY_UNLIKELY(!get_cbor_string_chunk(result)))
+            {
+                return false;
+            }
+
+            if (open == 0)
+            {
+                return true;
+            }
+
+            get();
+        }
+    }
+
+    /*!
+    @brief reads a definite-length CBOR byte array
+
+    Reads everything @ref get_cbor_binary accepts except the indefinite-length
+    form, which that function handles itself. The bytes are appended to @a
+    result, so consecutive chunks of an indefinite-length byte array can be
+    read into the same byte array.
+
+    @param[out] result  byte array the bytes are appended to

    @return whether byte array creation completed
-    */
-    bool get_cbor_binary(binary_t& result)
-    {
-        if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::cbor, "binary")))
-        {
-            return false;
-        }

+    @pre @a current is not EOF
+    */
+    bool get_cbor_binary_chunk(binary_t& result)
+    {
        switch (current)
        {
            // Binary data (0x00..0x17 bytes follow)
@@ -1168,20 +1211,6 @@ class binary_reader
                       get_binary(input_format_t::cbor, len, result);
            }

-            case 0x5F: // Binary data (indefinite length)
-            {
-                while (get() != 0xFF)
-                {
-                    binary_t chunk;
-                    if (!get_cbor_binary(chunk))
-                    {
-                        return false;
-                    }
-                    result.insert(result.end(), chunk.begin(), chunk.end());
-                }
-                return true;
-            }
-
            default:
            {
                auto last_token = get_token_string();
@@ -1191,6 +1220,63 @@ class binary_reader
        }
    }

+    /*!
+    @brief reads a CBOR byte array
+
+    This function first reads starting bytes to determine the expected
+    byte array length and then copies this number of bytes into the byte array.
+    Additionally, CBOR's byte arrays with indefinite lengths are supported.
+
+    @param[out] result  created byte array
+
+    @return whether byte array creation completed
+    */
+    bool get_cbor_binary(binary_t& result)
+    {
+        // the open indefinite-length byte arrays are counted rather than
+        // recursed through, for the reason given in @ref get_cbor_string
+        std::size_t open = 0;
+
+        while (true)
+        {
+            if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::cbor, "binary")))
+            {
+                return false;
+            }
+
+            if (current == 0x5F) // Binary data (indefinite length)
+            {
+                ++open;
+                get();
+                continue;
+            }
+
+            // a break marker closes the innermost indefinite-length byte
+            // array; outside of one it falls through to the error below
+            if (open != 0 && current == 0xFF)
+            {
+                if (--open == 0)
+                {
+                    return true;
+                }
+                get();
+                continue;
+            }
+
+            if (JSON_HEDLEY_UNLIKELY(!get_cbor_binary_chunk(result)))
+            {
+                return false;
+            }
+
+            if (open == 0)
+            {
+                return true;
+            }
+
+            get();
+        }
+    }
+
    /*!
    @brief narrow a definite CBOR array/map length to std::size_t

@@ -4473,8 +4473,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        basic_json result;
        auto ia = detail::input_adapter(std::forward<InputType>(i));
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    /// @brief create a JSON value from an input in CBOR format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -4490,8 +4493,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        basic_json result;
        auto ia = detail::input_adapter(std::move(first), std::move(last));
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    template<typename T>
@@ -4516,8 +4522,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        auto ia = i.get();
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
        // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    /// @brief create a JSON value from an input in MessagePack format
@@ -4531,8 +4540,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        basic_json result;
        auto ia = detail::input_adapter(std::forward<InputType>(i));
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    /// @brief create a JSON value from an input in MessagePack format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -4547,8 +4559,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        basic_json result;
        auto ia = detail::input_adapter(std::move(first), std::move(last));
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    template<typename T>
@@ -4571,8 +4586,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        auto ia = i.get();
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
        // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    /// @brief create a JSON value from an input in UBJSON format
@@ -4586,8 +4604,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        basic_json result;
        auto ia = detail::input_adapter(std::forward<InputType>(i));
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    /// @brief create a JSON value from an input in UBJSON format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -4602,8 +4623,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        basic_json result;
        auto ia = detail::input_adapter(std::move(first), std::move(last));
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    template<typename T>
@@ -4626,8 +4650,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        auto ia = i.get();
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
        // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    /// @brief create a JSON value from an input in BJData format
@@ -4641,8 +4668,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        basic_json result;
        auto ia = detail::input_adapter(std::forward<InputType>(i));
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bjdata).sax_parse(input_format_t::bjdata, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::bjdata).sax_parse(input_format_t::bjdata, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    /// @brief create a JSON value from an input in BJData format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -4657,8 +4687,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        basic_json result;
        auto ia = detail::input_adapter(std::move(first), std::move(last));
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bjdata).sax_parse(input_format_t::bjdata, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::bjdata).sax_parse(input_format_t::bjdata, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    /// @brief create a JSON value from an input in BSON format
@@ -4672,8 +4705,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        basic_json result;
        auto ia = detail::input_adapter(std::forward<InputType>(i));
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    /// @brief create a JSON value from an input in BSON format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -4688,8 +4724,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        basic_json result;
        auto ia = detail::input_adapter(std::move(first), std::move(last));
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    template<typename T>
@@ -4712,8 +4751,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        auto ia = i.get();
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
        // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }
    /// @}

@@ -11683,23 +11683,21 @@ class binary_reader
    }

    /*!
-    @brief reads a CBOR string
+    @brief reads a definite-length CBOR string

-    This function first reads starting bytes to determine the expected
-    string length and then copies this number of bytes into a string.
-    Additionally, CBOR's strings with indefinite lengths are supported.
+    Reads everything @ref get_cbor_string accepts except the indefinite-length
+    form, which that function handles itself. The bytes are appended to @a
+    result, so consecutive chunks of an indefinite-length string can be read
+    into the same string.

-    @param[out] result  created string
+    @param[out] result  string the bytes are appended to

    @return whether string creation completed
-    */
-    bool get_cbor_string(string_t& result)
-    {
-        if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::cbor, "string")))
-        {
-            return false;
-        }

+    @pre @a current is not EOF
+    */
+    bool get_cbor_string_chunk(string_t& result)
+    {
        switch (current)
        {
            // UTF-8 string (0x00..0x17 bytes follow)
@@ -11755,20 +11753,6 @@ class binary_reader
                return get_number(input_format_t::cbor, len) && get_string(input_format_t::cbor, len, result);
            }

-            case 0x7F: // UTF-8 string (indefinite length)
-            {
-                while (get() != 0xFF)
-                {
-                    string_t chunk;
-                    if (!get_cbor_string(chunk))
-                    {
-                        return false;
-                    }
-                    result.append(chunk);
-                }
-                return true;
-            }
-
            default:
            {
                auto last_token = get_token_string();
@@ -11779,23 +11763,82 @@ class binary_reader
    }

    /*!
-    @brief reads a CBOR byte array
+    @brief reads a CBOR string

    This function first reads starting bytes to determine the expected
-    byte array length and then copies this number of bytes into the byte array.
-    Additionally, CBOR's byte arrays with indefinite lengths are supported.
+    string length and then copies this number of bytes into a string.
+    Additionally, CBOR's strings with indefinite lengths are supported.

-    @param[out] result  created byte array
+    @param[out] result  created string
+
+    @return whether string creation completed
+    */
+    bool get_cbor_string(string_t& result)
+    {
+        // number of indefinite-length strings that have been opened and not
+        // closed yet. RFC 8949, Section 3.2.3 does not permit nesting them,
+        // but this reader has always accepted it, so the open levels are
+        // counted instead of recursed through, which overflowed the stack for
+        // an input of repeated 0x7F bytes (see #5104). Every chunk is appended
+        // to the same result, so no per-level state is needed.
+        std::size_t open = 0;
+
+        while (true)
+        {
+            if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::cbor, "string")))
+            {
+                return false;
+            }
+
+            if (current == 0x7F) // UTF-8 string (indefinite length)
+            {
+                ++open;
+                get();
+                continue;
+            }
+
+            // a break marker closes the innermost indefinite-length string;
+            // outside of one it is not a string and falls through to the error
+            if (open != 0 && current == 0xFF)
+            {
+                if (--open == 0)
+                {
+                    return true;
+                }
+                get();
+                continue;
+            }
+
+            if (JSON_HEDLEY_UNLIKELY(!get_cbor_string_chunk(result)))
+            {
+                return false;
+            }
+
+            if (open == 0)
+            {
+                return true;
+            }
+
+            get();
+        }
+    }
+
+    /*!
+    @brief reads a definite-length CBOR byte array
+
+    Reads everything @ref get_cbor_binary accepts except the indefinite-length
+    form, which that function handles itself. The bytes are appended to @a
+    result, so consecutive chunks of an indefinite-length byte array can be
+    read into the same byte array.
+
+    @param[out] result  byte array the bytes are appended to

    @return whether byte array creation completed
-    */
-    bool get_cbor_binary(binary_t& result)
-    {
-        if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::cbor, "binary")))
-        {
-            return false;
-        }

+    @pre @a current is not EOF
+    */
+    bool get_cbor_binary_chunk(binary_t& result)
+    {
        switch (current)
        {
            // Binary data (0x00..0x17 bytes follow)
@@ -11855,20 +11898,6 @@ class binary_reader
                       get_binary(input_format_t::cbor, len, result);
            }

-            case 0x5F: // Binary data (indefinite length)
-            {
-                while (get() != 0xFF)
-                {
-                    binary_t chunk;
-                    if (!get_cbor_binary(chunk))
-                    {
-                        return false;
-                    }
-                    result.insert(result.end(), chunk.begin(), chunk.end());
-                }
-                return true;
-            }
-
            default:
            {
                auto last_token = get_token_string();
@@ -11878,6 +11907,63 @@ class binary_reader
        }
    }

+    /*!
+    @brief reads a CBOR byte array
+
+    This function first reads starting bytes to determine the expected
+    byte array length and then copies this number of bytes into the byte array.
+    Additionally, CBOR's byte arrays with indefinite lengths are supported.
+
+    @param[out] result  created byte array
+
+    @return whether byte array creation completed
+    */
+    bool get_cbor_binary(binary_t& result)
+    {
+        // the open indefinite-length byte arrays are counted rather than
+        // recursed through, for the reason given in @ref get_cbor_string
+        std::size_t open = 0;
+
+        while (true)
+        {
+            if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::cbor, "binary")))
+            {
+                return false;
+            }
+
+            if (current == 0x5F) // Binary data (indefinite length)
+            {
+                ++open;
+                get();
+                continue;
+            }
+
+            // a break marker closes the innermost indefinite-length byte
+            // array; outside of one it falls through to the error below
+            if (open != 0 && current == 0xFF)
+            {
+                if (--open == 0)
+                {
+                    return true;
+                }
+                get();
+                continue;
+            }
+
+            if (JSON_HEDLEY_UNLIKELY(!get_cbor_binary_chunk(result)))
+            {
+                return false;
+            }
+
+            if (open == 0)
+            {
+                return true;
+            }
+
+            get();
+        }
+    }
+
    /*!
    @brief narrow a definite CBOR array/map length to std::size_t

@@ -25901,8 +25987,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        basic_json result;
        auto ia = detail::input_adapter(std::forward<InputType>(i));
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    /// @brief create a JSON value from an input in CBOR format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -25918,8 +26007,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        basic_json result;
        auto ia = detail::input_adapter(std::move(first), std::move(last));
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    template<typename T>
@@ -25944,8 +26036,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        auto ia = i.get();
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
        // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    /// @brief create a JSON value from an input in MessagePack format
@@ -25959,8 +26054,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        basic_json result;
        auto ia = detail::input_adapter(std::forward<InputType>(i));
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    /// @brief create a JSON value from an input in MessagePack format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -25975,8 +26073,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        basic_json result;
        auto ia = detail::input_adapter(std::move(first), std::move(last));
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    template<typename T>
@@ -25999,8 +26100,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        auto ia = i.get();
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
        // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    /// @brief create a JSON value from an input in UBJSON format
@@ -26014,8 +26118,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        basic_json result;
        auto ia = detail::input_adapter(std::forward<InputType>(i));
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    /// @brief create a JSON value from an input in UBJSON format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -26030,8 +26137,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        basic_json result;
        auto ia = detail::input_adapter(std::move(first), std::move(last));
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    template<typename T>
@@ -26054,8 +26164,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        auto ia = i.get();
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
        // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    /// @brief create a JSON value from an input in BJData format
@@ -26069,8 +26182,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        basic_json result;
        auto ia = detail::input_adapter(std::forward<InputType>(i));
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bjdata).sax_parse(input_format_t::bjdata, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::bjdata).sax_parse(input_format_t::bjdata, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    /// @brief create a JSON value from an input in BJData format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -26085,8 +26201,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        basic_json result;
        auto ia = detail::input_adapter(std::move(first), std::move(last));
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bjdata).sax_parse(input_format_t::bjdata, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::bjdata).sax_parse(input_format_t::bjdata, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    /// @brief create a JSON value from an input in BSON format
@@ -26100,8 +26219,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        basic_json result;
        auto ia = detail::input_adapter(std::forward<InputType>(i));
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    /// @brief create a JSON value from an input in BSON format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -26116,8 +26238,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        basic_json result;
        auto ia = detail::input_adapter(std::move(first), std::move(last));
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }

    template<typename T>
@@ -26140,8 +26265,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        auto ia = i.get();
        detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
        // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
    }
    /// @}

@@ -177,24 +177,6 @@ json_test_add_test_for(src/unit-comparison.cpp
    MAIN test_main CXX_STANDARDS ${test_cxx_standards} ${test_force}
 )

-# test the parser again with JSON_DIAGNOSTIC_POSITIONS enabled
-json_test_set_test_options(test-class_parser_diagnostic_positions
-    COMPILE_DEFINITIONS JSON_DIAGNOSTIC_POSITIONS=1
-)
-json_test_add_test_for(src/unit-class_parser.cpp
-    NAME test-class_parser_diagnostic_positions
-    MAIN test_main CXX_STANDARDS ${test_cxx_standards} ${test_force}
-)
-
-# test diagnostic positions again without regular diagnostics (JSON pointer paths)
-json_test_set_test_options(test-diagnostic-positions_only
-    COMPILE_DEFINITIONS JSON_DIAGNOSTICS=0
-)
-json_test_add_test_for(src/unit-diagnostic-positions.cpp
-    NAME test-diagnostic-positions_only
-    MAIN test_main CXX_STANDARDS ${test_cxx_standards} ${test_force}
-)
-
 # *DO NOT* use json_test_set_test_options() below this line

 #############################################################################
@@ -2035,6 +2035,58 @@ TEST_CASE("CBOR definite length equal to the indefinite-length sentinel")
    }
 }

+TEST_CASE("CBOR indefinite-length strings do not recurse per chunk")
+{
+    // Reading an indefinite-length string or byte array used to call itself
+    // once per chunk, so a payload of repeated 0x7F (or 0x5F) bytes exhausted
+    // the call stack before any of the input was rejected. The open levels are
+    // counted now, and the levels below prove the reader still reads the same
+    // values and reports the same errors at the same byte offsets.
+    json _;
+
+    SECTION("many open levels are reported, not crashed on")
+    {
+        const std::vector<uint8_t> input(200000, 0x7F);
+        CHECK_THROWS_WITH_AS(_ = json::from_cbor(input), "[json.exception.parse_error.110] parse error at byte 200001: syntax error while parsing CBOR string: unexpected end of input", json::parse_error&);
+        CHECK(json::from_cbor(input, true, false).is_discarded());
+    }
+
+    SECTION("many open levels are reported, not crashed on (binary)")
+    {
+        const std::vector<uint8_t> input(200000, 0x5F);
+        CHECK_THROWS_WITH_AS(_ = json::from_cbor(input), "[json.exception.parse_error.110] parse error at byte 200001: syntax error while parsing CBOR binary: unexpected end of input", json::parse_error&);
+        CHECK(json::from_cbor(input, true, false).is_discarded());
+    }
+
+    SECTION("chunks are still concatenated")
+    {
+        CHECK(json::from_cbor(std::vector<uint8_t>({0x7F, 0xFF})) == json(""));
+        CHECK(json::from_cbor(std::vector<uint8_t>({0x7F, 0x61, 0x61, 0xFF})) == json("a"));
+        // nested indefinite-length strings are concatenated across levels
+        CHECK(json::from_cbor(std::vector<uint8_t>({0x7F, 0x7F, 0x61, 0x61, 0xFF, 0x61, 0x62, 0xFF})) == json("ab"));
+        CHECK(json::from_cbor(std::vector<uint8_t>({0x7F, 0x7F, 0x7F, 0x61, 0x7A, 0xFF, 0xFF, 0xFF})) == json("z"));
+        CHECK(json::from_cbor(std::vector<uint8_t>({0xA1, 0x7F, 0x61, 0x61, 0xFF, 0x01})) == json({{"a", 1}}));
+    }
+
+    SECTION("chunks are still concatenated (binary)")
+    {
+        CHECK(json::from_cbor(std::vector<uint8_t>({0x5F, 0x41, 0x61, 0xFF})) == json::binary({0x61}));
+        CHECK(json::from_cbor(std::vector<uint8_t>({0x5F, 0x5F, 0x41, 0x61, 0xFF, 0x41, 0x62, 0xFF})) == json::binary({0x61, 0x62}));
+    }
+
+    SECTION("a chunk that is not a string is still rejected")
+    {
+        CHECK_THROWS_WITH_AS(_ = json::from_cbor(std::vector<uint8_t>({0x7F, 0x7F, 0x00})), "[json.exception.parse_error.113] parse error at byte 3: syntax error while parsing CBOR string: expected length specification (0x60-0x7B) or indefinite string type (0x7F); last byte: 0x00", json::parse_error&);
+        CHECK_THROWS_WITH_AS(_ = json::from_cbor(std::vector<uint8_t>({0x5F, 0x5F, 0x00})), "[json.exception.parse_error.113] parse error at byte 3: syntax error while parsing CBOR binary: expected length specification (0x40-0x5B) or indefinite binary array type (0x5F); last byte: 0x00", json::parse_error&);
+    }
+
+    SECTION("a break marker outside an indefinite-length string is not a string")
+    {
+        // 0xFF only closes a string that was opened; on its own it is not one
+        CHECK_THROWS_WITH_AS(_ = json::from_cbor(std::vector<uint8_t>({0xA1, 0xFF, 0x01})), "[json.exception.parse_error.113] parse error at byte 2: syntax error while parsing CBOR string: expected length specification (0x60-0x7B) or indefinite string type (0x7F); last byte: 0xFF", json::parse_error&);
+    }
+}
+
 TEST_CASE("CBOR roundtrips" * doctest::skip())
 {
    SECTION("input from flynn")
@@ -17,8 +17,6 @@ using nlohmann::json;

 #include <valarray>
 #include <algorithm>
-#include <cstdio>
-#include <fstream>
 #include <list>
 #include <sstream>
 #include <string>
@@ -346,50 +344,6 @@ void trailing_comma_helper(const std::string& s)
    }
 }

-#if JSON_DIAGNOSTIC_POSITIONS
-/**
- * Validates that the generated JSON object is the same as expected
- * Validates that the start position and end position match the start and end of the string
- *
- * This check assumes that there is no whitespace around the json object in the original string.
- */
-void validate_generated_json_and_start_end_pos_helper(const std::string& original_string, const json& j, const json& check)
-{
-    CHECK(j == check);
-    CHECK(j.start_pos() == 0);
-    CHECK(j.end_pos() == original_string.size());
-}
-
-/**
- * Parses the root object from the given root string and validates that the start and end positions for the nested object are correct.
- *
- * This checks that whitespace around the nested object is included in the start and end positions of the root object.
- */
-void validate_start_end_pos_for_nested_obj_helper(const std::string& nested_type_json_str, const std::string& root_type_json_str, const json& expected_json, const json::parser_callback_t& cb = nullptr)
-{
-    json j;
-
-    // 1. If callback is provided, use callback version of parse()
-    if (cb)
-    {
-        j = json::parse(root_type_json_str, cb);
-    }
-    else
-    {
-        j = json::parse(root_type_json_str);
-    }
-
-    // 2. Check if the generated JSON is as expected
-    // Assumptions: The root_type_json_str does not have any whitespace around the json object
-    validate_generated_json_and_start_end_pos_helper(root_type_json_str, j, expected_json);
-
-    // 3. Get the nested object
-    const auto& nested = j["nested"];
-    // 4. Check if the start and end positions are generated correctly for nested objects and arrays
-    CHECK(nested_type_json_str == root_type_json_str.substr(nested.start_pos(), nested.end_pos() - nested.start_pos()));
-}
-#endif
-
 } // namespace

 TEST_CASE("parser class")
@@ -1825,228 +1779,6 @@ TEST_CASE("parser class")
        CHECK_THROWS_WITH_AS(_ = json::parse("/a", nullptr, true, true), "[json.exception.parse_error.101] parse error at line 1, column 2: syntax error while parsing value - invalid comment; expecting '/' or '*' after '/'; last read: '/a'", json::parse_error);
        CHECK_THROWS_WITH_AS(_ = json::parse("/*", nullptr, true, true), "[json.exception.parse_error.101] parse error at line 1, column 3: syntax error while parsing value - invalid comment; missing closing '*/'; last read: '/*<U+0000>'", json::parse_error);
    }
-
-#if JSON_DIAGNOSTIC_POSITIONS
-    // Macro for all test cases for start_pos and end_pos
-#define SETUP_TESTCASES() \
-    SECTION("with callback") \
-    { \
-        SECTION("filter nothing") \
-        { \
-            json::parser_callback_t const cb = [](int /*unused*/, json::parse_event_t /*unused*/, json& /*unused*/) noexcept \
-            { \
-                return true; \
-            }; \
-            validate_start_end_pos_for_nested_obj_helper(nested_type_json_str, root_type_json_str, expected, cb); \
-        } \
-        SECTION("filter element") \
-        { \
-            json::parser_callback_t const cb = [](int /*unused*/, json::parse_event_t event, json& j) noexcept \
-            { \
-                return (event != json::parse_event_t::key && event != json::parse_event_t::value) || j != json("a"); \
-            }; \
-            validate_start_end_pos_for_nested_obj_helper(nested_type_json_str, root_type_json_str, filteredExpected, cb); \
-        } \
-    } \
-    SECTION("without callback") \
-    { \
-        validate_start_end_pos_for_nested_obj_helper(nested_type_json_str, root_type_json_str, expected); \
-    }
-
-    SECTION("retrieve start position and end position")
-    {
-        SECTION("for object")
-        {
-            // Create an object with spaces to test the start and end positions. Spaces will not be included in the
-            // JSON object, however, the start and end positions should include the spaces from the input JSON string.
-            const std::string nested_type_json_str =  R"({    "a":       1,"b"      : "test1"})";
-            const std::string root_type_json_str =  R"({    "nested": )" + nested_type_json_str + R"(, "anotherValue": "test2"})";
-            auto expected = json({{"nested", {{"a", 1}, {"b", "test1"}}}, {"anotherValue", "test2"}});
-            auto filteredExpected = expected;
-            filteredExpected["nested"].erase("a");
-
-            SETUP_TESTCASES()
-        }
-
-        SECTION("for array")
-        {
-            const std::string nested_type_json_str =  R"(["a", "test", 45])";
-            const std::string root_type_json_str =  R"({   "nested": )" + nested_type_json_str + R"(, "anotherValue": "test" })";
-            auto expected = json({{"nested", {"a", "test", 45}}, {"anotherValue", "test"}});
-            auto filteredExpected = expected;
-            filteredExpected["nested"] = json({"test", 45});
-            SETUP_TESTCASES()
-        }
-
-        SECTION("for array with objects")
-        {
-            const std::string nested_type_json_str =  R"([{"a": 1, "b": "test"}, {"c": 2, "d": "test2"}])";
-            const std::string root_type_json_str =  R"({   "nested": )" + nested_type_json_str + R"(, "anotherValue": "test" })";
-            auto expected = json({{"nested", {{{"a", 1}, {"b", "test"}}, {{"c", 2}, {"d", "test2"}}}}, {"anotherValue", "test"}});
-            auto filteredExpected = expected;
-            filteredExpected["nested"][0].erase("a");
-            SETUP_TESTCASES()
-
-            auto j = json::parse(root_type_json_str);
-            auto nested_array = j["nested"];
-            const auto& nested_obj = nested_array[0];
-            CHECK(nested_type_json_str.substr(1, 21) == root_type_json_str.substr(nested_obj.start_pos(), nested_obj.end_pos() - nested_obj.start_pos()));
-            CHECK(nested_type_json_str.substr(24, 22) == root_type_json_str.substr(nested_array[1].start_pos(), nested_array[1].end_pos() - nested_array[1].start_pos()));
-        }
-
-        SECTION("for two levels of nesting objects")
-        {
-            const std::string nested_type_json_str =  R"({"nested2": {"b": "test"}})";
-            const std::string root_type_json_str =  R"({   "a": 2, "nested": )" + nested_type_json_str + R"(, "anotherValue": "test" })";
-            auto expected = json({{"a", 2}, {"nested", {{"nested2", {{"b", "test"}}}}}, {"anotherValue", "test"}});
-            auto filteredExpected = expected;
-            filteredExpected.erase("a");
-            SETUP_TESTCASES()
-
-            auto j = json::parse(root_type_json_str);
-            auto nested_obj = j["nested"]["nested2"];
-            CHECK(nested_type_json_str.substr(12, 13) == root_type_json_str.substr(nested_obj.start_pos(), nested_obj.end_pos() - nested_obj.start_pos()));
-        }
-
-        SECTION("for simple types")
-        {
-            SECTION("no nested")
-            {
-                SECTION("with callback")
-                {
-                    json::parser_callback_t const cb = [](int /*unused*/, json::parse_event_t /*unused*/, json& /*unused*/) noexcept
-                    {
-                        return true;
-                    };
-
-                    // 1. string type
-                    std::string json_str =  R"("test")";
-                    auto j = json::parse(json_str, cb);
-                    validate_generated_json_and_start_end_pos_helper(json_str, j, "test");
-
-                    // 2. number type
-                    json_str =  R"(1)";
-                    j = json::parse(json_str, cb);
-                    validate_generated_json_and_start_end_pos_helper(json_str, j, 1);
-
-                    // 3. boolean type
-                    json_str =  R"(true)";
-                    j = json::parse(json_str, cb);
-                    validate_generated_json_and_start_end_pos_helper(json_str, j, true);
-
-                    // 4. null type
-                    json_str =  R"(null)";
-                    j = json::parse(json_str, cb);
-                    validate_generated_json_and_start_end_pos_helper(json_str, j, nullptr);
-                }
-
-                SECTION("without callback")
-                {
-                    // 1. string type
-                    std::string json_str =  R"("test")";
-                    auto j = json::parse(json_str);
-                    validate_generated_json_and_start_end_pos_helper(json_str, j, "test");
-
-                    // 2. number type
-                    json_str =  R"(1)";
-                    j = json::parse(json_str);
-                    validate_generated_json_and_start_end_pos_helper(json_str, j, 1);
-
-                    json_str = R"(1.001239923)";
-                    j = json::parse(json_str);
-                    validate_generated_json_and_start_end_pos_helper(json_str, j, 1.001239923);
-
-                    json_str = R"(1.123812389000000)";
-                    j = json::parse(json_str);
-                    validate_generated_json_and_start_end_pos_helper(json_str, j, 1.123812389);
-
-                    // 3. boolean type
-                    json_str =  R"(true)";
-                    j = json::parse(json_str);
-                    validate_generated_json_and_start_end_pos_helper(json_str, j, true);
-
-                    json_str =  R"(false)";
-                    j = json::parse(json_str);
-                    validate_generated_json_and_start_end_pos_helper(json_str, j, false);
-
-                    // 4. null type
-                    json_str =  R"(null)";
-                    j = json::parse(json_str);
-                    validate_generated_json_and_start_end_pos_helper(json_str, j, nullptr);
-                }
-            }
-
-            SECTION("string type")
-            {
-                const std::string nested_type_json_str =  R"("test")";
-                const std::string root_type_json_str =  R"({ "a": 1,   "nested": )" + nested_type_json_str + R"(, "anotherValue": "test" })";
-                auto expected = json({{"nested", "test"}, {"anotherValue", "test"}, {"a", 1}});
-                auto filteredExpected = expected;
-                filteredExpected.erase("a");
-                SETUP_TESTCASES()
-            }
-
-            SECTION("number type")
-            {
-                const std::string nested_type_json_str =  R"(2)";
-                const std::string root_type_json_str =  R"({ "a": 1,   "nested": )" + nested_type_json_str + R"(, "anotherValue": "test" })";
-                auto expected = json({{"nested", 2}, {"anotherValue", "test"}, {"a", 1}});
-                auto filteredExpected = expected;
-                filteredExpected.erase("a");
-                SETUP_TESTCASES()
-            }
-
-            SECTION("boolean type")
-            {
-                const std::string nested_type_json_str =  R"(true)";
-                const std::string root_type_json_str =  R"({ "a": 1,   "nested": )" + nested_type_json_str + R"(, "anotherValue": "test" })";
-                auto expected = json({{"nested", true}, {"anotherValue", "test"}, {"a", 1}});
-                auto filteredExpected = expected;
-                filteredExpected.erase("a");
-                SETUP_TESTCASES()
-            }
-
-            SECTION("null type")
-            {
-                const std::string nested_type_json_str =  R"(null)";
-                const std::string root_type_json_str =  R"({ "a": 1,   "nested": )" + nested_type_json_str + R"(, "anotherValue": "test" })";
-                auto expected = json({{"nested", nullptr}, {"anotherValue", "test"}, {"a", 1}});
-                auto filteredExpected = expected;
-                filteredExpected.erase("a");
-                SETUP_TESTCASES()
-            }
-        }
-        SECTION("with leading whitespace and newlines around root JSON")
-        {
-            const std::string initial_whitespace = R"(
-                
-            )";
-            const std::string nested_type_json_str = R"({
-                "a": 1,
-                "nested": {
-                    "b": "test"
-                },
-                "anotherValue": "test"
-            })";
-            const std::string end_whitespace = R"(
-                
-            )";
-            const std::string root_type_json_str = initial_whitespace + nested_type_json_str + end_whitespace;
-
-            auto expected = json({{"a", 1}, {"nested", {{"b", "test"}}}, {"anotherValue", "test"}});
-
-            auto j = json::parse(root_type_json_str);
-
-            // 2. Check if the generated JSON is as expected
-            CHECK(j == expected);
-
-            // 3. Check if the start and end positions do not include the surrounding whitespace
-            CHECK(j.start_pos() == initial_whitespace.size());
-            CHECK(j.end_pos() == root_type_json_str.size() - end_whitespace.size());
-        }
-    }
-#undef SETUP_TESTCASES
-#endif
 }

 // this test relies on parse errors being thrown, so it is skipped when
@@ -2155,321 +1887,3 @@ TEST_CASE("last-read diagnostics are identical across input adapters")
    }
 }
 #endif // !defined(JSON_NOEXCEPTION)
-
-// this test characterizes the current (documented-by-example, not otherwise
-// specified) behavior of JSON_DIAGNOSTIC_POSITIONS positions with respect to
-// value lifetime (copy/move/swap/mutation), the various input adapters, and
-// user-driven SAX usage. It is regression protection, not a behavior
-// specification: if any of these checks fail after a change to json.hpp,
-// that change deliberately altered observable behavior and the test (and
-// this comment) should be updated accordingly, rather than "fixed" blindly.
-#if JSON_DIAGNOSTIC_POSITIONS
-TEST_CASE("diagnostic positions: value lifetime, input adapters, and SAX")
-{
-    SECTION("value lifetime")
-    {
-        SECTION("copy constructor copies positions, recursively")
-        {
-            // basic_json(const basic_json&) (json.hpp, around line 1192) copies
-            // start_position/end_position for the value itself; nested values
-            // are copied via their own copy constructor (through the copied
-            // object/array container), so positions are preserved throughout
-            // the whole tree.
-            const std::string s = R"({"a":1,"b":[1,2,3]})";
-            const json a = json::parse(s);
-            const json b = a; // NOLINT(performance-unnecessary-copy-initialization)
-
-            CHECK(b.start_pos() == a.start_pos());
-            CHECK(b.end_pos() == a.end_pos());
-            CHECK(b["b"].start_pos() == a["b"].start_pos());
-            CHECK(b["b"].end_pos() == a["b"].end_pos());
-            CHECK(b["b"][0].start_pos() == a["b"][0].start_pos());
-            CHECK(b["b"][0].end_pos() == a["b"][0].end_pos());
-
-            // sanity: the positions are meaningful (not all npos)
-            CHECK(b.start_pos() == 0);
-            CHECK(b.end_pos() == s.size());
-        }
-
-        SECTION("move constructor resets the moved-from value to npos")
-        {
-            // basic_json(basic_json&&) (json.hpp, around line 1265) copies
-            // other's start_position/end_position into *this and then resets
-            // other's to npos (see the cppcheck-suppress[accessForwarded]
-            // annotation there, which flags this reset as worth a second
-            // look). Only the top-level moved-from value is affected; its
-            // (moved-away) children are gone along with it.
-            const std::string s = R"({"a":1,"b":[1,2,3]})";
-            json a = json::parse(s);
-            const auto a_start = a.start_pos();
-            const auto a_end = a.end_pos();
-            const auto nested_start = a["b"].start_pos();
-            const auto nested_end = a["b"].end_pos();
-
-            const json b(std::move(a));
-
-            // the destination retains the original positions, recursively
-            CHECK(b.start_pos() == a_start);
-            CHECK(b.end_pos() == a_end);
-            CHECK(b["b"].start_pos() == nested_start);
-            CHECK(b["b"].end_pos() == nested_end);
-
-            // the moved-from value is reset to a null and reports npos
-            CHECK(a.is_null()); // NOLINT(bugprone-use-after-move,clang-analyzer-cplusplus.Move)
-            CHECK(a.start_pos() == std::string::npos); // NOLINT(bugprone-use-after-move,clang-analyzer-cplusplus.Move)
-            CHECK(a.end_pos() == std::string::npos); // NOLINT(bugprone-use-after-move,clang-analyzer-cplusplus.Move)
-        }
-
-        SECTION("swap() does NOT exchange positions (likely a real bug, see below)")
-        {
-            // NOTE (characterizing, not fixing, for #5420): basic_json::swap()
-            // (json.hpp, around line 3540, and the friend swap() that forwards
-            // to it) swaps m_data.m_type and m_data.m_value but -- unlike
-            // copy-assignment's operator=(basic_json) (json.hpp, around line
-            // 1291), which swaps start_position/end_position as part of its
-            // copy-and-swap implementation -- it never touches
-            // start_position/end_position. So after swap(a, b), the *values*
-            // of a and b are exchanged, but their *positions* are not: each
-            // ends up with its own original position describing the other's
-            // new content. This looks like an oversight/inconsistency rather
-            // than intended behavior, and is flagged to the maintainer; this
-            // test only pins the current (surprising) behavior so a fix (or a
-            // deliberate decision to keep it) shows up here as an intentional
-            // change rather than a silent regression.
-            json a = json::parse(R"({"a":1})");
-            json b = json::parse(R"([1,2,3,4,5])");
-            const auto a_start = a.start_pos();
-            const auto a_end = a.end_pos();
-            const auto b_start = b.start_pos();
-            const auto b_end = b.end_pos();
-            // both start at 0 (root values start right away), but their
-            // lengths (and thus end positions) differ, which is enough to
-            // tell after the swap whether positions actually moved with
-            // the values
-            CHECK(a_end != b_end);
-
-            using std::swap;
-            swap(a, b);
-
-            // values were exchanged as expected ...
-            CHECK(a == json::parse(R"([1,2,3,4,5])"));
-            CHECK(b == json::parse(R"({"a":1})"));
-
-            // ... but positions were NOT: each variable kept its own
-            // original position, now describing the other's content
-            CHECK(a.start_pos() == a_start);
-            CHECK(a.end_pos() == a_end);
-            CHECK(b.start_pos() == b_start);
-            CHECK(b.end_pos() == b_end);
-        }
-
-        SECTION("mutating a parsed document leaves positions of unrelated values untouched")
-        {
-            // Positions are recorded once, during parsing, and are not
-            // recomputed on mutation. As a consequence, after a mutation the
-            // parent's own recorded span may no longer describe its current
-            // (serialized) content -- it still describes what was originally
-            // parsed. This is characterized here as current behavior, not
-            // asserted to be desirable or specified.
-            SECTION("operator[] adding a new object key")
-            {
-                const std::string s = R"({"a":1})";
-                json j = json::parse(s);
-                const auto root_start = j.start_pos();
-                const auto root_end = j.end_pos();
-                const auto a_start = j["a"].start_pos();
-                const auto a_end = j["a"].end_pos();
-
-                j["c"] = 42;
-
-                // the newly-added value was never parsed, so it has no position
-                CHECK(j["c"].start_pos() == std::string::npos);
-                CHECK(j["c"].end_pos() == std::string::npos);
-
-                // the existing sibling's position is unaffected
-                CHECK(j["a"].start_pos() == a_start);
-                CHECK(j["a"].end_pos() == a_end);
-
-                // the parent's own recorded span is left as-is (now stale:
-                // it still reflects the original, shorter `{"a":1}` string)
-                CHECK(j.start_pos() == root_start);
-                CHECK(j.end_pos() == root_end);
-            }
-
-            SECTION("push_back on a parsed array")
-            {
-                const std::string s = R"([1,2,3])";
-                json j = json::parse(s);
-                const auto root_start = j.start_pos();
-                const auto root_end = j.end_pos();
-                const auto first_start = j[0].start_pos();
-
-                j.push_back(4);
-
-                CHECK(j.back().start_pos() == std::string::npos);
-                CHECK(j.back().end_pos() == std::string::npos);
-                CHECK(j[0].start_pos() == first_start);
-                CHECK(j.start_pos() == root_start);
-                CHECK(j.end_pos() == root_end);
-            }
-
-            SECTION("erase on a parsed array shifts elements but keeps their own positions")
-            {
-                const std::string s = R"([1,2,3])";
-                json j = json::parse(s);
-                const auto second_start = j[1].start_pos();
-                const auto third_start = j[2].start_pos();
-                const auto root_start = j.start_pos();
-                const auto root_end = j.end_pos();
-
-                j.erase(0);
-
-                // remaining elements moved down an index, but each one still
-                // reports the position it had *before* the erase (i.e. its
-                // position in the original source string, not a
-                // recalculated one)
-                CHECK(j[0].start_pos() == second_start);
-                CHECK(j[1].start_pos() == third_start);
-
-                // the parent's own recorded span is again left as-is
-                CHECK(j.start_pos() == root_start);
-                CHECK(j.end_pos() == root_end);
-            }
-        }
-    }
-
-    SECTION("input adapters")
-    {
-        SECTION("wide string input: positions count transcoded UTF-8 bytes, not wide characters")
-        {
-            // 'é' (U+00E9) is a single code unit in a wchar_t/UTF-16 string, but
-            // transcodes to 2 bytes in UTF-8; the lexer only ever sees the
-            // transcoded UTF-8 byte stream, so reported positions are byte
-            // offsets into that UTF-8 stream, not indices into the original
-            // std::wstring.
-            // é (rather than a literal 'é' byte sequence in this source
-            // file) so the wide-string literal's meaning does not depend on
-            // the compiler's assumed source character set (MSVC, without
-            // /utf-8, would otherwise decode the raw UTF-8 bytes using the
-            // system code page instead of as UTF-8)
-            const std::wstring ws = L"{\"a\":\"\u00e9\u00e9\"}";
-            CHECK(ws.size() == 10); // 10 wide characters
-
-            const json j = json::parse(ws);
-            CHECK(j.start_pos() == 0);
-            // the transcoded UTF-8 form is 2 bytes longer than the wide string,
-            // because each of the two 'é' characters becomes 2 UTF-8 bytes
-            CHECK(j.end_pos() == 12);
-            CHECK(j.end_pos() != ws.size());
-
-            const json& a = j["a"];
-            CHECK(a.start_pos() == 5);
-            CHECK(a.end_pos() == 11);
-        }
-
-        SECTION("BOM-prefixed input: start_pos() reflects the skipped 3-byte BOM")
-        {
-            const std::string s = "\xEF\xBB\xBF{\"a\":1}";
-            const json j = json::parse(s);
-
-            // the lexer silently skips the BOM before parsing the value, so
-            // the root value's recorded span starts right after it
-            CHECK(j.start_pos() == 3);
-            CHECK(j.end_pos() == s.size());
-        }
-
-        SECTION("std::istringstream: positions are consistent, not npos")
-        {
-            const std::string s = R"({"a":1,"b":2})";
-            std::istringstream ss(s);
-            const json j = json::parse(ss);
-
-            CHECK(j.start_pos() == 0);
-            CHECK(j.end_pos() == s.size());
-            CHECK(j["a"].start_pos() == 5);
-        }
-
-        SECTION("std::ifstream: positions are consistent, not npos")
-        {
-            const std::string s = R"({"a":1,"b":2})";
-            {
-                std::ofstream file("unit-class_parser_diagnostic_positions.tmp");
-                file << s;
-            }
-
-            {
-                std::ifstream f("unit-class_parser_diagnostic_positions.tmp");
-                const json j = json::parse(f);
-
-                CHECK(j.start_pos() == 0);
-                CHECK(j.end_pos() == s.size());
-                CHECK(j["a"].start_pos() == 5);
-            }
-
-            static_cast<void>(std::remove("unit-class_parser_diagnostic_positions.tmp"));
-        }
-
-        SECTION("iterator-pair input: positions are consistent, not npos")
-        {
-            const std::string s = R"({"a":1,"b":2})";
-            const json j = json::parse(s.begin(), s.end());
-
-            CHECK(j.start_pos() == 0);
-            CHECK(j.end_pos() == s.size());
-            CHECK(j["a"].start_pos() == 5);
-        }
-
-        SECTION("binary formats have no text positions")
-        {
-            // binary formats (CBOR, MessagePack, UBJSON, BSON, BJData) are
-            // parsed via detail::binary_reader, which never sets
-            // start_position/end_position on the values it produces (they
-            // have no notion of a text offset), so every value's position
-            // stays at its default of npos.
-            const json src = json::parse(R"({"a":1,"b":[1,2]})");
-
-            const json from_cbor = json::from_cbor(json::to_cbor(src));
-            CHECK(from_cbor.start_pos() == std::string::npos);
-            CHECK(from_cbor.end_pos() == std::string::npos);
-            CHECK(from_cbor["a"].start_pos() == std::string::npos);
-            CHECK(from_cbor["b"][0].start_pos() == std::string::npos);
-
-            const json from_msgpack = json::from_msgpack(json::to_msgpack(src));
-            CHECK(from_msgpack.start_pos() == std::string::npos);
-            CHECK(from_msgpack.end_pos() == std::string::npos);
-
-            const json from_ubjson = json::from_ubjson(json::to_ubjson(src));
-            CHECK(from_ubjson.start_pos() == std::string::npos);
-            CHECK(from_ubjson.end_pos() == std::string::npos);
-
-            const json from_bson_val = json::from_bson(json::to_bson(src));
-            CHECK(from_bson_val.start_pos() == std::string::npos);
-            CHECK(from_bson_val.end_pos() == std::string::npos);
-        }
-    }
-
-    SECTION("user-driven SAX consumers with no lexer report npos")
-    {
-        // json::parse() internally wires up its json_sax_dom_parser with a
-        // pointer to its own lexer (see parser.hpp), which is how positions
-        // get set at all. A user who constructs a json_sax_dom_parser
-        // directly (e.g. to drive it via json::sax_parse()) and does not
-        // supply a lexer pointer gets a consumer with m_lexer_ref == nullptr;
-        // every "if (m_lexer_ref)" guard in json_sax.hpp is then skipped, so
-        // every value it produces keeps its default, unset position (npos).
-        // This was previously true but silently unasserted (operator==
-        // ignores positions), see #5420.
-        json result;
-        nlohmann::detail::json_sax_dom_parser<json, nlohmann::detail::string_input_adapter_type> sdp(result);
-        const std::string s = R"({"a":1,"b":[1,2,3]})";
-        CHECK(json::sax_parse(s, &sdp));
-
-        CHECK(result.start_pos() == std::string::npos);
-        CHECK(result.end_pos() == std::string::npos);
-        CHECK(result["a"].start_pos() == std::string::npos);
-        CHECK(result["a"].end_pos() == std::string::npos);
-        CHECK(result["b"][0].start_pos() == std::string::npos);
-        CHECK(result["b"][0].end_pos() == std::string::npos);
-    }
-}
-#endif
@@ -0,0 +1,44 @@
+//     __ _____ _____ _____
+//  __|  |   __|     |   | |  JSON for Modern C++ (supporting code)
+// |  |  |__   |  |  | | | |  version 3.12.0
+// |_____|_____|_____|_|___|  https://github.com/nlohmann/json
+//
+// SPDX-FileCopyrightText: 2013-2026 Niels Lohmann <https://nlohmann.me>
+// SPDX-License-Identifier: MIT
+
+#include "doctest_compatibility.h"
+
+#ifdef JSON_DIAGNOSTICS
+    #undef JSON_DIAGNOSTICS
+#endif
+
+#define JSON_DIAGNOSTICS 0
+#define JSON_DIAGNOSTIC_POSITIONS 1
+#include <nlohmann/json.hpp>
+
+using json = nlohmann::json;
+
+TEST_CASE("Better diagnostics with positions only")
+{
+    SECTION("invalid type")
+    {
+        const std::string json_invalid_string = R"(
+        {
+            "address": {
+                "street": "Fake Street",
+                "housenumber": "1"
+            }
+        }
+        )";
+        json j = json::parse(json_invalid_string);
+        CHECK_THROWS_WITH_AS(j.at("address").at("housenumber").get<int>(),
+                             "[json.exception.type_error.302] (bytes 108-111) type must be number, but is string", json::type_error);
+    }
+
+    SECTION("invalid type without positions")
+    {
+        const json j = "foo";
+        CHECK_THROWS_WITH_AS(j.get<int>(),
+                             "[json.exception.type_error.302] type must be number, but is string", json::type_error);
+    }
+}
@@ -8,9 +8,7 @@

 #include "doctest_compatibility.h"

-#ifndef JSON_DIAGNOSTICS
-    #define JSON_DIAGNOSTICS 1
-#endif
+#define JSON_DIAGNOSTICS 1
 #define JSON_DIAGNOSTIC_POSITIONS 1
 #include <nlohmann/json.hpp>

@@ -29,13 +27,8 @@ TEST_CASE("Better diagnostics with positions")
        }
        )";
        json j = json::parse(json_invalid_string);
-#if JSON_DIAGNOSTICS
        CHECK_THROWS_WITH_AS(j.at("address").at("housenumber").get<int>(),
                             "[json.exception.type_error.302] (/address/housenumber) (bytes 108-111) type must be number, but is string", json::type_error);
-#else
-        CHECK_THROWS_WITH_AS(j.at("address").at("housenumber").get<int>(),
-                             "[json.exception.type_error.302] (bytes 108-111) type must be number, but is string", json::type_error);
-#endif
    }

    SECTION("invalid type without positions")
@@ -81,12 +74,7 @@ TEST_CASE("Better diagnostics with positions")
        // (/foo/bar); the position of that parent is reported in the message
        const json doc = json::parse(R"({"foo":{"bar":"a string"}})");
        const json patch = json::parse(R"([{"op":"add","path":"/foo/bar/baz","value":1}])");
-#if JSON_DIAGNOSTICS
        CHECK_THROWS_WITH_AS(doc.patch(patch),
                             "[json.exception.out_of_range.411] (/foo/bar) (bytes 14-24) cannot add value: the JSON Patch 'add' target's parent is of type string, but must be an object or array", json::out_of_range);
-#else
-        CHECK_THROWS_WITH_AS(doc.patch(patch),
-                             "[json.exception.out_of_range.411] (bytes 14-24) cannot add value: the JSON Patch 'add' target's parent is of type string, but must be an object or array", json::out_of_range);
-#endif
    }
 }