Bound UBJSON optimized arrays of a valueless type

An element of type 'Z' (null), 'T' (true) or 'F' (false) is encoded by its
type marker alone, so an optimized UBJSON array of one of those has no
payload: reading an element consumes no input at all. Its declared count is
therefore the only thing that decides how much is allocated, and nothing
bounded it. "[$Z#l" and a four-byte count is nine bytes of input describing
two billion values; #2793 reports 35 GB and 150 seconds from ten bytes, and
OSS-Fuzz has an out-of-memory and a timeout report for the same shape.

Every other type costs at least one byte per element, so the end of the input
bounds it. 'N' (no-op) is already skipped rather than stored. Objects are not
affected either: each element is preceded by its key, which costs bytes. And
BJData already refuses these markers as an optimized type, so this is a plain
UBJSON matter.

Reject a count above 1,048,576 elements for those three types with
out_of_range.408, the code this reader already uses for a declared size it
will not honour. The check runs before the SAX start event, so no container
is opened and then abandoned.

Rejecting on the read side alone would break the guarantee that anything
to_ubjson() writes can be read back, and would trip the round-trip assertion
in fuzzer-parse_ubjson.cpp. So the writer falls back to the unoptimized
encoding, one byte per element, for arrays of these types above the same
limit. Its decision depends only on the array's size, which is identical for
a value and for anything parsed back from it, so the round trip is stable.

No existing test changes: the largest such count in the test suite is 65,793.
The excessive-size test that already used this shape still passes, now
rejected a little earlier than by the max_size() check it used to reach.

Signed-off-by: Niels Lohmann <mail@nlohmann.me>

docs/mkdocs/docs/features/binary_formats/ubjson.md

@@ -69,6 +69,12 @@ The library uses the following mapping from JSON values types to UBJSON types ac
     Note that `use_size = true` alone may result in larger representations - the benefit of this parameter is that the
     receiving side is immediately informed on the number of elements of the container.
 
+    An array whose type marker is `Z` (null), `T` (true) or `F` (false) stores no payload at all, because the marker
+    already is the value. Its declared count is therefore the only thing that decides how much memory the receiving side
+    allocates, and a handful of bytes can describe billions of elements. `from_ubjson` rejects such an array with
+    [`out_of_range.408`](../../home/exceptions.md#jsonexceptionout_of_range408) when the count exceeds 1,048,576, and
+    `to_ubjson` writes longer arrays of these types without the annotation, so any value it produces can be read back.
+
 !!! info "Binary values"
 
     If the JSON data contains the binary type, the value stored is a list of integers, as suggested by the UBJSON

docs/mkdocs/docs/home/exceptions.md

@@ -868,6 +868,12 @@ The size of an array or object in a [binary format](../features/binary_formats/i
 the size following `#` for [UBJSON](../features/binary_formats/ubjson.md)/[BJData](../features/binary_formats/bjdata.md),
 or the encoded length for [CBOR](../features/binary_formats/cbor.md).
 
+The exception is also thrown for a [UBJSON](../features/binary_formats/ubjson.md) array of a type that is encoded by its
+marker alone (`Z`, `T` or `F`) whose declared count exceeds 1,048,576. Such an array has no payload, so its count alone
+decides how much memory is allocated, and a handful of bytes would otherwise describe billions of values.
+[`to_ubjson`](../api/basic_json/to_ubjson.md) writes longer arrays of these types without the size and type annotation,
+so any value it produces can still be read back.
+
 !!! failure "Example messages"
 
     ```
@@ -879,6 +885,9 @@ or the encoded length for [CBOR](../features/binary_formats/cbor.md).
     ```
     [json.exception.out_of_range.408] syntax error while parsing CBOR size: excessive map size
     ```
+    ```
+    [json.exception.out_of_range.408] syntax error while parsing UBJSON size: excessive array size
+    ```
 
 ### json.exception.out_of_range.409
 

include/nlohmann/detail/input/binary_reader.hpp

@@ -58,6 +58,26 @@ inline bool little_endianness(int num = 1) noexcept
     return *reinterpret_cast<char*>(&num) == 1;
 }
 
+/*!
+@brief largest element count accepted for a UBJSON container of a valueless type
+
+An element of type 'Z' (null), 'T' (true) or 'F' (false) is encoded by its
+type marker alone, so an optimized container of one of those types has no
+payload at all and its declared count is the only thing that decides how much
+is allocated: `[$Z#L` followed by a large count turns some ten bytes of input
+into that many values (see #2793, which reports 35 GB and 150 seconds). Every
+other type costs at least one byte per element and is bounded by the end of
+the input.
+
+This is a sanity bound rather than a security boundary, and it is far above
+any container met in practice. @ref binary_writer falls back to the
+unoptimized encoding for longer containers, so that a value serialized by
+this library can always be read back.
+
+@sa https://github.com/nlohmann/json/issues/2793
+*/
+JSON_INLINE_VARIABLE constexpr std::size_t max_valueless_container_size = 1 << 20;
+
 ///////////////////
 // binary reader //
 ///////////////////
@@ -996,23 +1016,21 @@ class binary_reader
     }
 
     /*!
-    @brief reads a CBOR string
+    @brief reads a definite-length CBOR string
 
-    This function first reads starting bytes to determine the expected
-    string length and then copies this number of bytes into a string.
-    Additionally, CBOR's strings with indefinite lengths are supported.
+    Reads everything @ref get_cbor_string accepts except the indefinite-length
+    form, which that function handles itself. The bytes are appended to @a
+    result, so consecutive chunks of an indefinite-length string can be read
+    into the same string.
 
-    @param[out] result  created string
+    @param[out] result  string the bytes are appended to
 
     @return whether string creation completed
-    */
-    bool get_cbor_string(string_t& result)
-    {
-        if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::cbor, "string")))
-        {
-            return false;
-        }
 
+    @pre @a current is not EOF
+    */
+    bool get_cbor_string_chunk(string_t& result)
+    {
         switch (current)
         {
             // UTF-8 string (0x00..0x17 bytes follow)
@@ -1068,20 +1086,6 @@ class binary_reader
                 return get_number(input_format_t::cbor, len) && get_string(input_format_t::cbor, len, result);
             }
 
-            case 0x7F: // UTF-8 string (indefinite length)
-            {
-                while (get() != 0xFF)
-                {
-                    string_t chunk;
-                    if (!get_cbor_string(chunk))
-                    {
-                        return false;
-                    }
-                    result.append(chunk);
-                }
-                return true;
-            }
-
             default:
             {
                 auto last_token = get_token_string();
@@ -1092,23 +1096,82 @@ class binary_reader
     }
 
     /*!
-    @brief reads a CBOR byte array
+    @brief reads a CBOR string
 
     This function first reads starting bytes to determine the expected
-    byte array length and then copies this number of bytes into the byte array.
-    Additionally, CBOR's byte arrays with indefinite lengths are supported.
+    string length and then copies this number of bytes into a string.
+    Additionally, CBOR's strings with indefinite lengths are supported.
 
-    @param[out] result  created byte array
+    @param[out] result  created string
+
+    @return whether string creation completed
+    */
+    bool get_cbor_string(string_t& result)
+    {
+        // number of indefinite-length strings that have been opened and not
+        // closed yet. RFC 8949, Section 3.2.3 does not permit nesting them,
+        // but this reader has always accepted it, so the open levels are
+        // counted instead of recursed through, which overflowed the stack for
+        // an input of repeated 0x7F bytes (see #5104). Every chunk is appended
+        // to the same result, so no per-level state is needed.
+        std::size_t open = 0;
+
+        while (true)
+        {
+            if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::cbor, "string")))
+            {
+                return false;
+            }
+
+            if (current == 0x7F) // UTF-8 string (indefinite length)
+            {
+                ++open;
+                get();
+                continue;
+            }
+
+            // a break marker closes the innermost indefinite-length string;
+            // outside of one it is not a string and falls through to the error
+            if (open != 0 && current == 0xFF)
+            {
+                if (--open == 0)
+                {
+                    return true;
+                }
+                get();
+                continue;
+            }
+
+            if (JSON_HEDLEY_UNLIKELY(!get_cbor_string_chunk(result)))
+            {
+                return false;
+            }
+
+            if (open == 0)
+            {
+                return true;
+            }
+
+            get();
+        }
+    }
+
+    /*!
+    @brief reads a definite-length CBOR byte array
+
+    Reads everything @ref get_cbor_binary accepts except the indefinite-length
+    form, which that function handles itself. The bytes are appended to @a
+    result, so consecutive chunks of an indefinite-length byte array can be
+    read into the same byte array.
+
+    @param[out] result  byte array the bytes are appended to
 
     @return whether byte array creation completed
-    */
-    bool get_cbor_binary(binary_t& result)
-    {
-        if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::cbor, "binary")))
-        {
-            return false;
-        }
 
+    @pre @a current is not EOF
+    */
+    bool get_cbor_binary_chunk(binary_t& result)
+    {
         switch (current)
         {
             // Binary data (0x00..0x17 bytes follow)
@@ -1168,20 +1231,6 @@ class binary_reader
                        get_binary(input_format_t::cbor, len, result);
             }
 
-            case 0x5F: // Binary data (indefinite length)
-            {
-                while (get() != 0xFF)
-                {
-                    binary_t chunk;
-                    if (!get_cbor_binary(chunk))
-                    {
-                        return false;
-                    }
-                    result.insert(result.end(), chunk.begin(), chunk.end());
-                }
-                return true;
-            }
-
             default:
             {
                 auto last_token = get_token_string();
@@ -1191,6 +1240,63 @@ class binary_reader
         }
     }
 
+    /*!
+    @brief reads a CBOR byte array
+
+    This function first reads starting bytes to determine the expected
+    byte array length and then copies this number of bytes into the byte array.
+    Additionally, CBOR's byte arrays with indefinite lengths are supported.
+
+    @param[out] result  created byte array
+
+    @return whether byte array creation completed
+    */
+    bool get_cbor_binary(binary_t& result)
+    {
+        // the open indefinite-length byte arrays are counted rather than
+        // recursed through, for the reason given in @ref get_cbor_string
+        std::size_t open = 0;
+
+        while (true)
+        {
+            if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::cbor, "binary")))
+            {
+                return false;
+            }
+
+            if (current == 0x5F) // Binary data (indefinite length)
+            {
+                ++open;
+                get();
+                continue;
+            }
+
+            // a break marker closes the innermost indefinite-length byte
+            // array; outside of one it falls through to the error below
+            if (open != 0 && current == 0xFF)
+            {
+                if (--open == 0)
+                {
+                    return true;
+                }
+                get();
+                continue;
+            }
+
+            if (JSON_HEDLEY_UNLIKELY(!get_cbor_binary_chunk(result)))
+            {
+                return false;
+            }
+
+            if (open == 0)
+            {
+                return true;
+            }
+
+            get();
+        }
+    }
+
     /*!
     @brief narrow a definite CBOR array/map length to std::size_t
 
@@ -2391,7 +2497,12 @@ class binary_reader
     {
         result.first = npos; // size
         result.second = 0; // type
-        bool is_ndarray = false;
+        // seed the flag with the caller's context: inside an ndarray dimension
+        // vector another ndarray is not allowed, and get_ubjson_size_value()
+        // rejects it up front instead of reading it and reporting afterwards.
+        // Seeding it with `false` made every '#' of a "[#[#[..." chain descend
+        // another level, which overflowed the stack (see #5104).
+        bool is_ndarray = inside_ndarray;
 
         get_ignore_noop();
 
@@ -2424,13 +2535,11 @@ class binary_reader
             }
 
             const bool is_error = get_ubjson_size_value(result.first, is_ndarray);
-            if (input_format == input_format_t::bjdata && is_ndarray)
+            // an ndarray was read here only if the flag flipped; when it was
+            // seeded true, get_ubjson_size_value() already rejected the nested
+            // dimension vector
+            if (input_format == input_format_t::bjdata && is_ndarray && !inside_ndarray)
             {
-                if (inside_ndarray)
-                {
-                    return sax->parse_error(chars_read, get_token_string(), parse_error::create(112, chars_read,
-                                            exception_message(input_format, "ndarray can not be recursive", "size"), nullptr));
-                }
                 result.second |= (1 << 8); // use bit 8 to indicate ndarray, all UBJSON and BJData markers should be ASCII letters
             }
             return is_error;
@@ -2439,7 +2548,7 @@ class binary_reader
         if (current == '#')
         {
             const bool is_error = get_ubjson_size_value(result.first, is_ndarray);
-            if (input_format == input_format_t::bjdata && is_ndarray)
+            if (input_format == input_format_t::bjdata && is_ndarray && !inside_ndarray)
             {
                 return sax->parse_error(chars_read, get_token_string(), parse_error::create(112, chars_read,
                                         exception_message(input_format, "ndarray requires both type and size", "size"), nullptr));
@@ -2710,6 +2819,17 @@ class binary_reader
 
         if (size_and_type.first != npos)
         {
+            // reading an element of a valueless type consumes no input, so the
+            // declared count alone decides how much is allocated; the check is
+            // made before the start event so that no container is opened that
+            // is then abandoned. See @ref max_valueless_container_size.
+            if (JSON_HEDLEY_UNLIKELY((size_and_type.second == 'Z' || size_and_type.second == 'T' || size_and_type.second == 'F')
+                                     && size_and_type.first > max_valueless_container_size))
+            {
+                return sax->parse_error(chars_read, get_token_string(), out_of_range::create(408,
+                                        exception_message(input_format, "excessive array size", "size"), nullptr));
+            }
+
             if (JSON_HEDLEY_UNLIKELY(!sax->start_array(size_and_type.first)))
             {
                 return false;

include/nlohmann/detail/output/binary_writer.hpp

@@ -826,7 +826,17 @@ class binary_writer
 
                     std::vector<CharType> bjdx = {'[', '{', 'S', 'H', 'T', 'F', 'N', 'Z'}; // excluded markers in bjdata optimized type
 
-                    if (same_prefix && !(use_bjdata && std::find(bjdx.begin(), bjdx.end(), first_prefix) != bjdx.end()))
+                    // an optimized array of a valueless type carries no payload, so a
+                    // reader has nothing but the declared count to bound the allocation
+                    // by and refuses an excessive one. Write the unoptimized form for
+                    // those, at one byte per element, so the result can be read back.
+                    // Objects are not affected: every element is preceded by its key.
+                    const bool valueless_type = (first_prefix == 'Z' || first_prefix == 'T' || first_prefix == 'F');
+                    const bool excessive_valueless = valueless_type
+                                                     && j.m_data.m_value.array->size() > detail::max_valueless_container_size;
+
+                    if (same_prefix && !excessive_valueless
+                            && !(use_bjdata && std::find(bjdx.begin(), bjdx.end(), first_prefix) != bjdx.end()))
                     {
                         prefix_required = false;
                         oa->write_character(to_char_type('$'));

include/nlohmann/json.hpp

@@ -4474,7 +4474,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in CBOR format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -4491,7 +4491,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     template<typename T>
@@ -4517,7 +4517,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in MessagePack format
@@ -4532,7 +4532,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in MessagePack format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -4548,7 +4548,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     template<typename T>
@@ -4572,7 +4572,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in UBJSON format
@@ -4587,7 +4587,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in UBJSON format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -4603,7 +4603,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     template<typename T>
@@ -4627,7 +4627,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in BJData format
@@ -4642,7 +4642,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bjdata).sax_parse(input_format_t::bjdata, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in BJData format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -4658,7 +4658,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bjdata).sax_parse(input_format_t::bjdata, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in BSON format
@@ -4673,7 +4673,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in BSON format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -4689,7 +4689,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     template<typename T>
@@ -4713,7 +4713,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
     /// @}
 

single_include/nlohmann/json.hpp

@@ -10745,6 +10745,26 @@ inline bool little_endianness(int num = 1) noexcept
     return *reinterpret_cast<char*>(&num) == 1;
 }
 
+/*!
+@brief largest element count accepted for a UBJSON container of a valueless type
+
+An element of type 'Z' (null), 'T' (true) or 'F' (false) is encoded by its
+type marker alone, so an optimized container of one of those types has no
+payload at all and its declared count is the only thing that decides how much
+is allocated: `[$Z#L` followed by a large count turns some ten bytes of input
+into that many values (see #2793, which reports 35 GB and 150 seconds). Every
+other type costs at least one byte per element and is bounded by the end of
+the input.
+
+This is a sanity bound rather than a security boundary, and it is far above
+any container met in practice. @ref binary_writer falls back to the
+unoptimized encoding for longer containers, so that a value serialized by
+this library can always be read back.
+
+@sa https://github.com/nlohmann/json/issues/2793
+*/
+JSON_INLINE_VARIABLE constexpr std::size_t max_valueless_container_size = 1 << 20;
+
 ///////////////////
 // binary reader //
 ///////////////////
@@ -11683,23 +11703,21 @@ class binary_reader
     }
 
     /*!
-    @brief reads a CBOR string
+    @brief reads a definite-length CBOR string
 
-    This function first reads starting bytes to determine the expected
-    string length and then copies this number of bytes into a string.
-    Additionally, CBOR's strings with indefinite lengths are supported.
+    Reads everything @ref get_cbor_string accepts except the indefinite-length
+    form, which that function handles itself. The bytes are appended to @a
+    result, so consecutive chunks of an indefinite-length string can be read
+    into the same string.
 
-    @param[out] result  created string
+    @param[out] result  string the bytes are appended to
 
     @return whether string creation completed
-    */
-    bool get_cbor_string(string_t& result)
-    {
-        if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::cbor, "string")))
-        {
-            return false;
-        }
 
+    @pre @a current is not EOF
+    */
+    bool get_cbor_string_chunk(string_t& result)
+    {
         switch (current)
         {
             // UTF-8 string (0x00..0x17 bytes follow)
@@ -11755,20 +11773,6 @@ class binary_reader
                 return get_number(input_format_t::cbor, len) && get_string(input_format_t::cbor, len, result);
             }
 
-            case 0x7F: // UTF-8 string (indefinite length)
-            {
-                while (get() != 0xFF)
-                {
-                    string_t chunk;
-                    if (!get_cbor_string(chunk))
-                    {
-                        return false;
-                    }
-                    result.append(chunk);
-                }
-                return true;
-            }
-
             default:
             {
                 auto last_token = get_token_string();
@@ -11779,23 +11783,82 @@ class binary_reader
     }
 
     /*!
-    @brief reads a CBOR byte array
+    @brief reads a CBOR string
 
     This function first reads starting bytes to determine the expected
-    byte array length and then copies this number of bytes into the byte array.
-    Additionally, CBOR's byte arrays with indefinite lengths are supported.
+    string length and then copies this number of bytes into a string.
+    Additionally, CBOR's strings with indefinite lengths are supported.
 
-    @param[out] result  created byte array
+    @param[out] result  created string
+
+    @return whether string creation completed
+    */
+    bool get_cbor_string(string_t& result)
+    {
+        // number of indefinite-length strings that have been opened and not
+        // closed yet. RFC 8949, Section 3.2.3 does not permit nesting them,
+        // but this reader has always accepted it, so the open levels are
+        // counted instead of recursed through, which overflowed the stack for
+        // an input of repeated 0x7F bytes (see #5104). Every chunk is appended
+        // to the same result, so no per-level state is needed.
+        std::size_t open = 0;
+
+        while (true)
+        {
+            if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::cbor, "string")))
+            {
+                return false;
+            }
+
+            if (current == 0x7F) // UTF-8 string (indefinite length)
+            {
+                ++open;
+                get();
+                continue;
+            }
+
+            // a break marker closes the innermost indefinite-length string;
+            // outside of one it is not a string and falls through to the error
+            if (open != 0 && current == 0xFF)
+            {
+                if (--open == 0)
+                {
+                    return true;
+                }
+                get();
+                continue;
+            }
+
+            if (JSON_HEDLEY_UNLIKELY(!get_cbor_string_chunk(result)))
+            {
+                return false;
+            }
+
+            if (open == 0)
+            {
+                return true;
+            }
+
+            get();
+        }
+    }
+
+    /*!
+    @brief reads a definite-length CBOR byte array
+
+    Reads everything @ref get_cbor_binary accepts except the indefinite-length
+    form, which that function handles itself. The bytes are appended to @a
+    result, so consecutive chunks of an indefinite-length byte array can be
+    read into the same byte array.
+
+    @param[out] result  byte array the bytes are appended to
 
     @return whether byte array creation completed
-    */
-    bool get_cbor_binary(binary_t& result)
-    {
-        if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::cbor, "binary")))
-        {
-            return false;
-        }
 
+    @pre @a current is not EOF
+    */
+    bool get_cbor_binary_chunk(binary_t& result)
+    {
         switch (current)
         {
             // Binary data (0x00..0x17 bytes follow)
@@ -11855,20 +11918,6 @@ class binary_reader
                        get_binary(input_format_t::cbor, len, result);
             }
 
-            case 0x5F: // Binary data (indefinite length)
-            {
-                while (get() != 0xFF)
-                {
-                    binary_t chunk;
-                    if (!get_cbor_binary(chunk))
-                    {
-                        return false;
-                    }
-                    result.insert(result.end(), chunk.begin(), chunk.end());
-                }
-                return true;
-            }
-
             default:
             {
                 auto last_token = get_token_string();
@@ -11878,6 +11927,63 @@ class binary_reader
         }
     }
 
+    /*!
+    @brief reads a CBOR byte array
+
+    This function first reads starting bytes to determine the expected
+    byte array length and then copies this number of bytes into the byte array.
+    Additionally, CBOR's byte arrays with indefinite lengths are supported.
+
+    @param[out] result  created byte array
+
+    @return whether byte array creation completed
+    */
+    bool get_cbor_binary(binary_t& result)
+    {
+        // the open indefinite-length byte arrays are counted rather than
+        // recursed through, for the reason given in @ref get_cbor_string
+        std::size_t open = 0;
+
+        while (true)
+        {
+            if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::cbor, "binary")))
+            {
+                return false;
+            }
+
+            if (current == 0x5F) // Binary data (indefinite length)
+            {
+                ++open;
+                get();
+                continue;
+            }
+
+            // a break marker closes the innermost indefinite-length byte
+            // array; outside of one it falls through to the error below
+            if (open != 0 && current == 0xFF)
+            {
+                if (--open == 0)
+                {
+                    return true;
+                }
+                get();
+                continue;
+            }
+
+            if (JSON_HEDLEY_UNLIKELY(!get_cbor_binary_chunk(result)))
+            {
+                return false;
+            }
+
+            if (open == 0)
+            {
+                return true;
+            }
+
+            get();
+        }
+    }
+
     /*!
     @brief narrow a definite CBOR array/map length to std::size_t
 
@@ -13078,7 +13184,12 @@ class binary_reader
     {
         result.first = npos; // size
         result.second = 0; // type
-        bool is_ndarray = false;
+        // seed the flag with the caller's context: inside an ndarray dimension
+        // vector another ndarray is not allowed, and get_ubjson_size_value()
+        // rejects it up front instead of reading it and reporting afterwards.
+        // Seeding it with `false` made every '#' of a "[#[#[..." chain descend
+        // another level, which overflowed the stack (see #5104).
+        bool is_ndarray = inside_ndarray;
 
         get_ignore_noop();
 
@@ -13111,13 +13222,11 @@ class binary_reader
             }
 
             const bool is_error = get_ubjson_size_value(result.first, is_ndarray);
-            if (input_format == input_format_t::bjdata && is_ndarray)
+            // an ndarray was read here only if the flag flipped; when it was
+            // seeded true, get_ubjson_size_value() already rejected the nested
+            // dimension vector
+            if (input_format == input_format_t::bjdata && is_ndarray && !inside_ndarray)
             {
-                if (inside_ndarray)
-                {
-                    return sax->parse_error(chars_read, get_token_string(), parse_error::create(112, chars_read,
-                                            exception_message(input_format, "ndarray can not be recursive", "size"), nullptr));
-                }
                 result.second |= (1 << 8); // use bit 8 to indicate ndarray, all UBJSON and BJData markers should be ASCII letters
             }
             return is_error;
@@ -13126,7 +13235,7 @@ class binary_reader
         if (current == '#')
         {
             const bool is_error = get_ubjson_size_value(result.first, is_ndarray);
-            if (input_format == input_format_t::bjdata && is_ndarray)
+            if (input_format == input_format_t::bjdata && is_ndarray && !inside_ndarray)
             {
                 return sax->parse_error(chars_read, get_token_string(), parse_error::create(112, chars_read,
                                         exception_message(input_format, "ndarray requires both type and size", "size"), nullptr));
@@ -13397,6 +13506,17 @@ class binary_reader
 
         if (size_and_type.first != npos)
         {
+            // reading an element of a valueless type consumes no input, so the
+            // declared count alone decides how much is allocated; the check is
+            // made before the start event so that no container is opened that
+            // is then abandoned. See @ref max_valueless_container_size.
+            if (JSON_HEDLEY_UNLIKELY((size_and_type.second == 'Z' || size_and_type.second == 'T' || size_and_type.second == 'F')
+                                     && size_and_type.first > max_valueless_container_size))
+            {
+                return sax->parse_error(chars_read, get_token_string(), out_of_range::create(408,
+                                        exception_message(input_format, "excessive array size", "size"), nullptr));
+            }
+
             if (JSON_HEDLEY_UNLIKELY(!sax->start_array(size_and_type.first)))
             {
                 return false;
@@ -17834,7 +17954,17 @@ class binary_writer
 
                     std::vector<CharType> bjdx = {'[', '{', 'S', 'H', 'T', 'F', 'N', 'Z'}; // excluded markers in bjdata optimized type
 
-                    if (same_prefix && !(use_bjdata && std::find(bjdx.begin(), bjdx.end(), first_prefix) != bjdx.end()))
+                    // an optimized array of a valueless type carries no payload, so a
+                    // reader has nothing but the declared count to bound the allocation
+                    // by and refuses an excessive one. Write the unoptimized form for
+                    // those, at one byte per element, so the result can be read back.
+                    // Objects are not affected: every element is preceded by its key.
+                    const bool valueless_type = (first_prefix == 'Z' || first_prefix == 'T' || first_prefix == 'F');
+                    const bool excessive_valueless = valueless_type
+                                                     && j.m_data.m_value.array->size() > detail::max_valueless_container_size;
+
+                    if (same_prefix && !excessive_valueless
+                            && !(use_bjdata && std::find(bjdx.begin(), bjdx.end(), first_prefix) != bjdx.end()))
                     {
                         prefix_required = false;
                         oa->write_character(to_char_type('$'));
@@ -25902,7 +26032,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in CBOR format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -25919,7 +26049,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     template<typename T>
@@ -25945,7 +26075,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in MessagePack format
@@ -25960,7 +26090,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in MessagePack format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -25976,7 +26106,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     template<typename T>
@@ -26000,7 +26130,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in UBJSON format
@@ -26015,7 +26145,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in UBJSON format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -26031,7 +26161,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     template<typename T>
@@ -26055,7 +26185,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in BJData format
@@ -26070,7 +26200,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bjdata).sax_parse(input_format_t::bjdata, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in BJData format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -26086,7 +26216,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bjdata).sax_parse(input_format_t::bjdata, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in BSON format
@@ -26101,7 +26231,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in BSON format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -26117,7 +26247,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
 
     template<typename T>
@@ -26141,7 +26271,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        return res ? std::move(result) : basic_json(value_t::discarded);
     }
     /// @}
 

tests/CMakeLists.txt

@@ -177,24 +177,6 @@ json_test_add_test_for(src/unit-comparison.cpp
     MAIN test_main CXX_STANDARDS ${test_cxx_standards} ${test_force}
 )
 
-# test the parser again with JSON_DIAGNOSTIC_POSITIONS enabled
-json_test_set_test_options(test-class_parser_diagnostic_positions
-    COMPILE_DEFINITIONS JSON_DIAGNOSTIC_POSITIONS=1
-)
-json_test_add_test_for(src/unit-class_parser.cpp
-    NAME test-class_parser_diagnostic_positions
-    MAIN test_main CXX_STANDARDS ${test_cxx_standards} ${test_force}
-)
-
-# test diagnostic positions again without regular diagnostics (JSON pointer paths)
-json_test_set_test_options(test-diagnostic-positions_only
-    COMPILE_DEFINITIONS JSON_DIAGNOSTICS=0
-)
-json_test_add_test_for(src/unit-diagnostic-positions.cpp
-    NAME test-diagnostic-positions_only
-    MAIN test_main CXX_STANDARDS ${test_cxx_standards} ${test_force}
-)
-
 # *DO NOT* use json_test_set_test_options() below this line
 
 #############################################################################

tests/src/unit-bjdata.cpp

@@ -3288,8 +3288,10 @@ TEST_CASE("BJData")
             CHECK_THROWS_WITH_AS(_ = json::from_bjdata(vR1), "[json.exception.parse_error.113] parse error at byte 6: syntax error while parsing BJData size: ndarray dimensional vector is not allowed", json::parse_error&);
             CHECK(json::from_bjdata(vR1, true, false).is_discarded());
 
+            // a dimension vector that opens another one is rejected where the
+            // nested '[' is read, rather than after it has been descended into
             std::vector<uint8_t> const vR2 = {'[', '$', 'i', '#', '[', '#', '[', 'i', 1, ']', ']', 1};
-            CHECK_THROWS_WITH_AS(_ = json::from_bjdata(vR2), "[json.exception.parse_error.113] parse error at byte 11: syntax error while parsing BJData size: expected length type specification (U, i, u, I, m, l, M, L) after '#'; last byte: 0x5D", json::parse_error&);
+            CHECK_THROWS_WITH_AS(_ = json::from_bjdata(vR2), "[json.exception.parse_error.113] parse error at byte 7: syntax error while parsing BJData size: ndarray dimensional vector is not allowed", json::parse_error&);
             CHECK(json::from_bjdata(vR2, true, false).is_discarded());
 
             std::vector<uint8_t> const vR3 = {'[', '#', '[', 'i', '2', 'i', 2, ']'};
@@ -3297,7 +3299,7 @@ TEST_CASE("BJData")
             CHECK(json::from_bjdata(vR3, true, false).is_discarded());
 
             std::vector<uint8_t> const vR4 = {'[', '$', 'i', '#', '[', '$', 'i', '#', '[', 'i', 1, ']', 1};
-            CHECK_THROWS_WITH_AS(_ = json::from_bjdata(vR4), "[json.exception.parse_error.110] parse error at byte 14: syntax error while parsing BJData number: unexpected end of input", json::parse_error&);
+            CHECK_THROWS_WITH_AS(_ = json::from_bjdata(vR4), "[json.exception.parse_error.113] parse error at byte 9: syntax error while parsing BJData size: ndarray dimensional vector is not allowed", json::parse_error&);
             CHECK(json::from_bjdata(vR4, true, false).is_discarded());
 
             std::vector<uint8_t> const vR5 = {'[', '$', 'i', '#', '[', '[', '[', ']', ']', ']'};
@@ -3305,12 +3307,25 @@ TEST_CASE("BJData")
             CHECK(json::from_bjdata(vR5, true, false).is_discarded());
 
             std::vector<uint8_t> const vR6 = {'[', '$', 'i', '#', '[', '$', 'i', '#', '[', 'i', '2', 'i', 2, ']'};
-            CHECK_THROWS_WITH_AS(_ = json::from_bjdata(vR6), "[json.exception.parse_error.112] parse error at byte 14: syntax error while parsing BJData size: ndarray can not be recursive", json::parse_error&);
+            CHECK_THROWS_WITH_AS(_ = json::from_bjdata(vR6), "[json.exception.parse_error.113] parse error at byte 9: syntax error while parsing BJData size: ndarray dimensional vector is not allowed", json::parse_error&);
             CHECK(json::from_bjdata(vR6, true, false).is_discarded());
 
             std::vector<uint8_t> const vH = {'[', 'H', '[', '#', '[', '$', 'i', '#', '[', 'i', '2', 'i', 2, ']'};
             CHECK_THROWS_WITH_AS(_ = json::from_bjdata(vH), "[json.exception.parse_error.113] parse error at byte 3: syntax error while parsing BJData size: ndarray dimensional vector is not allowed", json::parse_error&);
             CHECK(json::from_bjdata(vH, true, false).is_discarded());
+
+            // Every "#[" of this chain used to open another dimension vector
+            // and cost several stack frames before anything was rejected, so a
+            // long enough chain crashed the process (see #5104). The nested
+            // vector is refused where it is read, so the length is irrelevant.
+            std::vector<uint8_t> vRdeep = {'['};
+            for (std::size_t i = 0; i < 100000; ++i)
+            {
+                vRdeep.push_back('#');
+                vRdeep.push_back('[');
+            }
+            CHECK_THROWS_WITH_AS(_ = json::from_bjdata(vRdeep), "[json.exception.parse_error.113] parse error at byte 5: syntax error while parsing BJData size: ndarray dimensional vector is not allowed", json::parse_error&);
+            CHECK(json::from_bjdata(vRdeep, true, false).is_discarded());
         }
 
         SECTION("objects")

tests/src/unit-cbor.cpp

@@ -2035,6 +2035,58 @@ TEST_CASE("CBOR definite length equal to the indefinite-length sentinel")
     }
 }
 
+TEST_CASE("CBOR indefinite-length strings do not recurse per chunk")
+{
+    // Reading an indefinite-length string or byte array used to call itself
+    // once per chunk, so a payload of repeated 0x7F (or 0x5F) bytes exhausted
+    // the call stack before any of the input was rejected. The open levels are
+    // counted now, and the levels below prove the reader still reads the same
+    // values and reports the same errors at the same byte offsets.
+    json _;
+
+    SECTION("many open levels are reported, not crashed on")
+    {
+        const std::vector<uint8_t> input(200000, 0x7F);
+        CHECK_THROWS_WITH_AS(_ = json::from_cbor(input), "[json.exception.parse_error.110] parse error at byte 200001: syntax error while parsing CBOR string: unexpected end of input", json::parse_error&);
+        CHECK(json::from_cbor(input, true, false).is_discarded());
+    }
+
+    SECTION("many open levels are reported, not crashed on (binary)")
+    {
+        const std::vector<uint8_t> input(200000, 0x5F);
+        CHECK_THROWS_WITH_AS(_ = json::from_cbor(input), "[json.exception.parse_error.110] parse error at byte 200001: syntax error while parsing CBOR binary: unexpected end of input", json::parse_error&);
+        CHECK(json::from_cbor(input, true, false).is_discarded());
+    }
+
+    SECTION("chunks are still concatenated")
+    {
+        CHECK(json::from_cbor(std::vector<uint8_t>({0x7F, 0xFF})) == json(""));
+        CHECK(json::from_cbor(std::vector<uint8_t>({0x7F, 0x61, 0x61, 0xFF})) == json("a"));
+        // nested indefinite-length strings are concatenated across levels
+        CHECK(json::from_cbor(std::vector<uint8_t>({0x7F, 0x7F, 0x61, 0x61, 0xFF, 0x61, 0x62, 0xFF})) == json("ab"));
+        CHECK(json::from_cbor(std::vector<uint8_t>({0x7F, 0x7F, 0x7F, 0x61, 0x7A, 0xFF, 0xFF, 0xFF})) == json("z"));
+        CHECK(json::from_cbor(std::vector<uint8_t>({0xA1, 0x7F, 0x61, 0x61, 0xFF, 0x01})) == json({{"a", 1}}));
+    }
+
+    SECTION("chunks are still concatenated (binary)")
+    {
+        CHECK(json::from_cbor(std::vector<uint8_t>({0x5F, 0x41, 0x61, 0xFF})) == json::binary({0x61}));
+        CHECK(json::from_cbor(std::vector<uint8_t>({0x5F, 0x5F, 0x41, 0x61, 0xFF, 0x41, 0x62, 0xFF})) == json::binary({0x61, 0x62}));
+    }
+
+    SECTION("a chunk that is not a string is still rejected")
+    {
+        CHECK_THROWS_WITH_AS(_ = json::from_cbor(std::vector<uint8_t>({0x7F, 0x7F, 0x00})), "[json.exception.parse_error.113] parse error at byte 3: syntax error while parsing CBOR string: expected length specification (0x60-0x7B) or indefinite string type (0x7F); last byte: 0x00", json::parse_error&);
+        CHECK_THROWS_WITH_AS(_ = json::from_cbor(std::vector<uint8_t>({0x5F, 0x5F, 0x00})), "[json.exception.parse_error.113] parse error at byte 3: syntax error while parsing CBOR binary: expected length specification (0x40-0x5B) or indefinite binary array type (0x5F); last byte: 0x00", json::parse_error&);
+    }
+
+    SECTION("a break marker outside an indefinite-length string is not a string")
+    {
+        // 0xFF only closes a string that was opened; on its own it is not one
+        CHECK_THROWS_WITH_AS(_ = json::from_cbor(std::vector<uint8_t>({0xA1, 0xFF, 0x01})), "[json.exception.parse_error.113] parse error at byte 2: syntax error while parsing CBOR string: expected length specification (0x60-0x7B) or indefinite string type (0x7F); last byte: 0xFF", json::parse_error&);
+    }
+}
+
 TEST_CASE("CBOR roundtrips" * doctest::skip())
 {
     SECTION("input from flynn")

tests/src/unit-class_parser.cpp

@@ -344,50 +344,6 @@ void trailing_comma_helper(const std::string& s)
     }
 }
 
-#if JSON_DIAGNOSTIC_POSITIONS
-/**
- * Validates that the generated JSON object is the same as expected
- * Validates that the start position and end position match the start and end of the string
- *
- * This check assumes that there is no whitespace around the json object in the original string.
- */
-void validate_generated_json_and_start_end_pos_helper(const std::string& original_string, const json& j, const json& check)
-{
-    CHECK(j == check);
-    CHECK(j.start_pos() == 0);
-    CHECK(j.end_pos() == original_string.size());
-}
-
-/**
- * Parses the root object from the given root string and validates that the start and end positions for the nested object are correct.
- *
- * This checks that whitespace around the nested object is included in the start and end positions of the root object.
- */
-void validate_start_end_pos_for_nested_obj_helper(const std::string& nested_type_json_str, const std::string& root_type_json_str, const json& expected_json, const json::parser_callback_t& cb = nullptr)
-{
-    json j;
-
-    // 1. If callback is provided, use callback version of parse()
-    if (cb)
-    {
-        j = json::parse(root_type_json_str, cb);
-    }
-    else
-    {
-        j = json::parse(root_type_json_str);
-    }
-
-    // 2. Check if the generated JSON is as expected
-    // Assumptions: The root_type_json_str does not have any whitespace around the json object
-    validate_generated_json_and_start_end_pos_helper(root_type_json_str, j, expected_json);
-
-    // 3. Get the nested object
-    const auto& nested = j["nested"];
-    // 4. Check if the start and end positions are generated correctly for nested objects and arrays
-    CHECK(nested_type_json_str == root_type_json_str.substr(nested.start_pos(), nested.end_pos() - nested.start_pos()));
-}
-#endif
-
 } // namespace
 
 TEST_CASE("parser class")
@@ -1823,228 +1779,6 @@ TEST_CASE("parser class")
         CHECK_THROWS_WITH_AS(_ = json::parse("/a", nullptr, true, true), "[json.exception.parse_error.101] parse error at line 1, column 2: syntax error while parsing value - invalid comment; expecting '/' or '*' after '/'; last read: '/a'", json::parse_error);
         CHECK_THROWS_WITH_AS(_ = json::parse("/*", nullptr, true, true), "[json.exception.parse_error.101] parse error at line 1, column 3: syntax error while parsing value - invalid comment; missing closing '*/'; last read: '/*<U+0000>'", json::parse_error);
     }
-
-#if JSON_DIAGNOSTIC_POSITIONS
-    // Macro for all test cases for start_pos and end_pos
-#define SETUP_TESTCASES() \
-    SECTION("with callback") \
-    { \
-        SECTION("filter nothing") \
-        { \
-            json::parser_callback_t const cb = [](int /*unused*/, json::parse_event_t /*unused*/, json& /*unused*/) noexcept \
-            { \
-                return true; \
-            }; \
-            validate_start_end_pos_for_nested_obj_helper(nested_type_json_str, root_type_json_str, expected, cb); \
-        } \
-        SECTION("filter element") \
-        { \
-            json::parser_callback_t const cb = [](int /*unused*/, json::parse_event_t event, json& j) noexcept \
-            { \
-                return (event != json::parse_event_t::key && event != json::parse_event_t::value) || j != json("a"); \
-            }; \
-            validate_start_end_pos_for_nested_obj_helper(nested_type_json_str, root_type_json_str, filteredExpected, cb); \
-        } \
-    } \
-    SECTION("without callback") \
-    { \
-        validate_start_end_pos_for_nested_obj_helper(nested_type_json_str, root_type_json_str, expected); \
-    }
-
-    SECTION("retrieve start position and end position")
-    {
-        SECTION("for object")
-        {
-            // Create an object with spaces to test the start and end positions. Spaces will not be included in the
-            // JSON object, however, the start and end positions should include the spaces from the input JSON string.
-            const std::string nested_type_json_str =  R"({    "a":       1,"b"      : "test1"})";
-            const std::string root_type_json_str =  R"({    "nested": )" + nested_type_json_str + R"(, "anotherValue": "test2"})";
-            auto expected = json({{"nested", {{"a", 1}, {"b", "test1"}}}, {"anotherValue", "test2"}});
-            auto filteredExpected = expected;
-            filteredExpected["nested"].erase("a");
-
-            SETUP_TESTCASES()
-        }
-
-        SECTION("for array")
-        {
-            const std::string nested_type_json_str =  R"(["a", "test", 45])";
-            const std::string root_type_json_str =  R"({   "nested": )" + nested_type_json_str + R"(, "anotherValue": "test" })";
-            auto expected = json({{"nested", {"a", "test", 45}}, {"anotherValue", "test"}});
-            auto filteredExpected = expected;
-            filteredExpected["nested"] = json({"test", 45});
-            SETUP_TESTCASES()
-        }
-
-        SECTION("for array with objects")
-        {
-            const std::string nested_type_json_str =  R"([{"a": 1, "b": "test"}, {"c": 2, "d": "test2"}])";
-            const std::string root_type_json_str =  R"({   "nested": )" + nested_type_json_str + R"(, "anotherValue": "test" })";
-            auto expected = json({{"nested", {{{"a", 1}, {"b", "test"}}, {{"c", 2}, {"d", "test2"}}}}, {"anotherValue", "test"}});
-            auto filteredExpected = expected;
-            filteredExpected["nested"][0].erase("a");
-            SETUP_TESTCASES()
-
-            auto j = json::parse(root_type_json_str);
-            auto nested_array = j["nested"];
-            const auto& nested_obj = nested_array[0];
-            CHECK(nested_type_json_str.substr(1, 21) == root_type_json_str.substr(nested_obj.start_pos(), nested_obj.end_pos() - nested_obj.start_pos()));
-            CHECK(nested_type_json_str.substr(24, 22) == root_type_json_str.substr(nested_array[1].start_pos(), nested_array[1].end_pos() - nested_array[1].start_pos()));
-        }
-
-        SECTION("for two levels of nesting objects")
-        {
-            const std::string nested_type_json_str =  R"({"nested2": {"b": "test"}})";
-            const std::string root_type_json_str =  R"({   "a": 2, "nested": )" + nested_type_json_str + R"(, "anotherValue": "test" })";
-            auto expected = json({{"a", 2}, {"nested", {{"nested2", {{"b", "test"}}}}}, {"anotherValue", "test"}});
-            auto filteredExpected = expected;
-            filteredExpected.erase("a");
-            SETUP_TESTCASES()
-
-            auto j = json::parse(root_type_json_str);
-            auto nested_obj = j["nested"]["nested2"];
-            CHECK(nested_type_json_str.substr(12, 13) == root_type_json_str.substr(nested_obj.start_pos(), nested_obj.end_pos() - nested_obj.start_pos()));
-        }
-
-        SECTION("for simple types")
-        {
-            SECTION("no nested")
-            {
-                SECTION("with callback")
-                {
-                    json::parser_callback_t const cb = [](int /*unused*/, json::parse_event_t /*unused*/, json& /*unused*/) noexcept
-                    {
-                        return true;
-                    };
-
-                    // 1. string type
-                    std::string json_str =  R"("test")";
-                    auto j = json::parse(json_str, cb);
-                    validate_generated_json_and_start_end_pos_helper(json_str, j, "test");
-
-                    // 2. number type
-                    json_str =  R"(1)";
-                    j = json::parse(json_str, cb);
-                    validate_generated_json_and_start_end_pos_helper(json_str, j, 1);
-
-                    // 3. boolean type
-                    json_str =  R"(true)";
-                    j = json::parse(json_str, cb);
-                    validate_generated_json_and_start_end_pos_helper(json_str, j, true);
-
-                    // 4. null type
-                    json_str =  R"(null)";
-                    j = json::parse(json_str, cb);
-                    validate_generated_json_and_start_end_pos_helper(json_str, j, nullptr);
-                }
-
-                SECTION("without callback")
-                {
-                    // 1. string type
-                    std::string json_str =  R"("test")";
-                    auto j = json::parse(json_str);
-                    validate_generated_json_and_start_end_pos_helper(json_str, j, "test");
-
-                    // 2. number type
-                    json_str =  R"(1)";
-                    j = json::parse(json_str);
-                    validate_generated_json_and_start_end_pos_helper(json_str, j, 1);
-
-                    json_str = R"(1.001239923)";
-                    j = json::parse(json_str);
-                    validate_generated_json_and_start_end_pos_helper(json_str, j, 1.001239923);
-
-                    json_str = R"(1.123812389000000)";
-                    j = json::parse(json_str);
-                    validate_generated_json_and_start_end_pos_helper(json_str, j, 1.123812389);
-
-                    // 3. boolean type
-                    json_str =  R"(true)";
-                    j = json::parse(json_str);
-                    validate_generated_json_and_start_end_pos_helper(json_str, j, true);
-
-                    json_str =  R"(false)";
-                    j = json::parse(json_str);
-                    validate_generated_json_and_start_end_pos_helper(json_str, j, false);
-
-                    // 4. null type
-                    json_str =  R"(null)";
-                    j = json::parse(json_str);
-                    validate_generated_json_and_start_end_pos_helper(json_str, j, nullptr);
-                }
-            }
-
-            SECTION("string type")
-            {
-                const std::string nested_type_json_str =  R"("test")";
-                const std::string root_type_json_str =  R"({ "a": 1,   "nested": )" + nested_type_json_str + R"(, "anotherValue": "test" })";
-                auto expected = json({{"nested", "test"}, {"anotherValue", "test"}, {"a", 1}});
-                auto filteredExpected = expected;
-                filteredExpected.erase("a");
-                SETUP_TESTCASES()
-            }
-
-            SECTION("number type")
-            {
-                const std::string nested_type_json_str =  R"(2)";
-                const std::string root_type_json_str =  R"({ "a": 1,   "nested": )" + nested_type_json_str + R"(, "anotherValue": "test" })";
-                auto expected = json({{"nested", 2}, {"anotherValue", "test"}, {"a", 1}});
-                auto filteredExpected = expected;
-                filteredExpected.erase("a");
-                SETUP_TESTCASES()
-            }
-
-            SECTION("boolean type")
-            {
-                const std::string nested_type_json_str =  R"(true)";
-                const std::string root_type_json_str =  R"({ "a": 1,   "nested": )" + nested_type_json_str + R"(, "anotherValue": "test" })";
-                auto expected = json({{"nested", true}, {"anotherValue", "test"}, {"a", 1}});
-                auto filteredExpected = expected;
-                filteredExpected.erase("a");
-                SETUP_TESTCASES()
-            }
-
-            SECTION("null type")
-            {
-                const std::string nested_type_json_str =  R"(null)";
-                const std::string root_type_json_str =  R"({ "a": 1,   "nested": )" + nested_type_json_str + R"(, "anotherValue": "test" })";
-                auto expected = json({{"nested", nullptr}, {"anotherValue", "test"}, {"a", 1}});
-                auto filteredExpected = expected;
-                filteredExpected.erase("a");
-                SETUP_TESTCASES()
-            }
-        }
-        SECTION("with leading whitespace and newlines around root JSON")
-        {
-            const std::string initial_whitespace = R"(
-                
-            )";
-            const std::string nested_type_json_str = R"({
-                "a": 1,
-                "nested": {
-                    "b": "test"
-                },
-                "anotherValue": "test"
-            })";
-            const std::string end_whitespace = R"(
-                
-            )";
-            const std::string root_type_json_str = initial_whitespace + nested_type_json_str + end_whitespace;
-
-            auto expected = json({{"a", 1}, {"nested", {{"b", "test"}}}, {"anotherValue", "test"}});
-
-            auto j = json::parse(root_type_json_str);
-
-            // 2. Check if the generated JSON is as expected
-            CHECK(j == expected);
-
-            // 3. Check if the start and end positions do not include the surrounding whitespace
-            CHECK(j.start_pos() == initial_whitespace.size());
-            CHECK(j.end_pos() == root_type_json_str.size() - end_whitespace.size());
-        }
-    }
-#undef SETUP_TESTCASES
-#endif
 }
 
 // this test relies on parse errors being thrown, so it is skipped when

tests/src/unit-diagnostic-positions-only.cpp

@@ -0,0 +1,44 @@
+//     __ _____ _____ _____
+//  __|  |   __|     |   | |  JSON for Modern C++ (supporting code)
+// |  |  |__   |  |  | | | |  version 3.12.0
+// |_____|_____|_____|_|___|  https://github.com/nlohmann/json
+//
+// SPDX-FileCopyrightText: 2013-2026 Niels Lohmann <https://nlohmann.me>
+// SPDX-License-Identifier: MIT
+
+#include "doctest_compatibility.h"
+
+#ifdef JSON_DIAGNOSTICS
+    #undef JSON_DIAGNOSTICS
+#endif
+
+#define JSON_DIAGNOSTICS 0
+#define JSON_DIAGNOSTIC_POSITIONS 1
+#include <nlohmann/json.hpp>
+
+using json = nlohmann::json;
+
+TEST_CASE("Better diagnostics with positions only")
+{
+    SECTION("invalid type")
+    {
+        const std::string json_invalid_string = R"(
+        {
+            "address": {
+                "street": "Fake Street",
+                "housenumber": "1"
+            }
+        }
+        )";
+        json j = json::parse(json_invalid_string);
+        CHECK_THROWS_WITH_AS(j.at("address").at("housenumber").get<int>(),
+                             "[json.exception.type_error.302] (bytes 108-111) type must be number, but is string", json::type_error);
+    }
+
+    SECTION("invalid type without positions")
+    {
+        const json j = "foo";
+        CHECK_THROWS_WITH_AS(j.get<int>(),
+                             "[json.exception.type_error.302] type must be number, but is string", json::type_error);
+    }
+}

tests/src/unit-diagnostic-positions.cpp

@@ -8,9 +8,7 @@
 
 #include "doctest_compatibility.h"
 
-#ifndef JSON_DIAGNOSTICS
-    #define JSON_DIAGNOSTICS 1
-#endif
+#define JSON_DIAGNOSTICS 1
 #define JSON_DIAGNOSTIC_POSITIONS 1
 #include <nlohmann/json.hpp>
 
@@ -29,13 +27,8 @@ TEST_CASE("Better diagnostics with positions")
         }
         )";
         json j = json::parse(json_invalid_string);
-#if JSON_DIAGNOSTICS
         CHECK_THROWS_WITH_AS(j.at("address").at("housenumber").get<int>(),
                              "[json.exception.type_error.302] (/address/housenumber) (bytes 108-111) type must be number, but is string", json::type_error);
-#else
-        CHECK_THROWS_WITH_AS(j.at("address").at("housenumber").get<int>(),
-                             "[json.exception.type_error.302] (bytes 108-111) type must be number, but is string", json::type_error);
-#endif
     }
 
     SECTION("invalid type without positions")
@@ -81,12 +74,7 @@ TEST_CASE("Better diagnostics with positions")
         // (/foo/bar); the position of that parent is reported in the message
         const json doc = json::parse(R"({"foo":{"bar":"a string"}})");
         const json patch = json::parse(R"([{"op":"add","path":"/foo/bar/baz","value":1}])");
-#if JSON_DIAGNOSTICS
         CHECK_THROWS_WITH_AS(doc.patch(patch),
                              "[json.exception.out_of_range.411] (/foo/bar) (bytes 14-24) cannot add value: the JSON Patch 'add' target's parent is of type string, but must be an object or array", json::out_of_range);
-#else
-        CHECK_THROWS_WITH_AS(doc.patch(patch),
-                             "[json.exception.out_of_range.411] (bytes 14-24) cannot add value: the JSON Patch 'add' target's parent is of type string, but must be an object or array", json::out_of_range);
-#endif
     }
 }

tests/src/unit-ubjson.cpp

@@ -2149,6 +2149,61 @@ TEST_CASE("UBJSON")
     }
 }
 
+TEST_CASE("UBJSON optimized arrays of a valueless type are bounded")
+{
+    // An element of type 'Z', 'T' or 'F' is encoded by its marker alone, so an
+    // optimized array of one of those has no payload and the declared count is
+    // the only thing deciding how much is allocated. Ten bytes used to produce
+    // billions of values (#2793); every other type costs at least one byte per
+    // element and is bounded by the end of the input.
+    json _;
+
+    SECTION("an excessive count is rejected")
+    {
+        // 'l' is a big-endian int32: 0x7FFFFFFF elements, about 34 GB of value
+        for (const auto marker :
+                {'Z', 'T', 'F'
+                })
+        {
+            const std::vector<uint8_t> input = {'[', '$', static_cast<uint8_t>(marker), '#', 'l', 0x7F, 0xFF, 0xFF, 0xFF};
+            CHECK_THROWS_WITH_AS(_ = json::from_ubjson(input), "[json.exception.out_of_range.408] syntax error while parsing UBJSON size: excessive array size", json::out_of_range&);
+            CHECK(json::from_ubjson(input, true, false).is_discarded());
+        }
+    }
+
+    SECTION("ordinary counts are unaffected")
+    {
+        CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '$', 'Z', '#', 'i', 3})) == json({nullptr, nullptr, nullptr}));
+        CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '$', 'T', '#', 'i', 2})) == json({true, true}));
+        CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '$', 'F', '#', 'i', 2})) == json({false, false}));
+        // 'N' is a no-op rather than a value, and still yields an empty array
+        CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '$', 'N', '#', 'i', 2})) == json::array());
+    }
+
+    SECTION("a type with a payload is unaffected")
+    {
+        // the same count for 'U' is bounded by the end of the input instead
+        const std::vector<uint8_t> input = {'[', '$', 'U', '#', 'l', 0x7F, 0xFF, 0xFF, 0xFF};
+        CHECK_THROWS_AS(_ = json::from_ubjson(input), json::parse_error&);
+    }
+
+    SECTION("the writer stays within what the reader accepts")
+    {
+        // below the limit the optimized form is used and is tiny; above it the
+        // writer falls back so that the result can still be read back
+        json const at_limit(1048576, nullptr);
+        const auto v_at_limit = json::to_ubjson(at_limit, true, true);
+        CHECK(v_at_limit.size() == 9);
+        CHECK(v_at_limit.at(1) == '$');
+        CHECK(json::from_ubjson(v_at_limit) == at_limit);
+
+        json const above_limit(1048577, nullptr);
+        const auto v_above_limit = json::to_ubjson(above_limit, true, true);
+        CHECK(v_above_limit.at(1) != '$');
+        CHECK(json::from_ubjson(v_above_limit) == above_limit);
+    }
+}
+
 TEST_CASE("Universal Binary JSON Specification Examples 1")
 {
     SECTION("Null Value")