Stop CBOR indefinite-length strings from recursing per chunk

get_cbor_string() and get_cbor_binary() handled the indefinite-length forms
(0x7F and 0x5F) by calling themselves once per chunk. Each chunk therefore
cost a native stack frame, and since a chunk may itself be an indefinite-
length string, an input of repeated 0x7F bytes reached one frame per input
byte: 200,000 of them crash the process with SIGSEGV before a single byte is
rejected. This is the same defect as #5104, in a path the container-level
work does not touch.

Count the open levels instead of recursing through them. That is enough here
because every chunk is appended to the same result -- get_bytes() writes at
result.size() -- so there is no per-level state to keep. The temporary chunk
string and its copy into the result go away with the recursion.

The definite-length cases move to get_cbor_string_chunk() and
get_cbor_binary_chunk() unchanged, including their error messages, which
still name 0x7F and 0x5F because those are handled one level up.

Behaviour is unchanged. Comparing against develop over the interesting byte
sequences -- empty, single-chunk, nested, over-closed and truncated forms,
both strings and byte arrays, and an indefinite-length map key -- produces
identical values, error codes, messages and byte offsets. The 200,000-level
input now reports parse_error.110 at byte 200001 instead of crashing.

Note that nesting these is not valid CBOR: RFC 8949, Section 3.2.3 forbids
it. This does not change that either way -- it has always been accepted, and
rejecting it is a separate decision (#5317, #5325). Should it be rejected
later, that is now one condition on the level counter rather than a change to
the control flow.

Signed-off-by: Niels Lohmann <mail@nlohmann.me>

.github/workflows/check_amalgamation.yml

@@ -11,7 +11,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@05e31511f85b41b11d1cf0ef85d0992719546e2c # v2.21.0
+        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
         with:
           egress-policy: audit
 
@@ -34,7 +34,7 @@ jobs:
 
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@05e31511f85b41b11d1cf0ef85d0992719546e2c # v2.21.0
+        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
         with:
           egress-policy: audit
 

.github/workflows/cifuzz.yml

@@ -9,7 +9,7 @@ jobs:
     runs-on: ubuntu-22.04
     steps:
     - name: Harden Runner
-      uses: step-security/harden-runner@05e31511f85b41b11d1cf0ef85d0992719546e2c # v2.21.0
+      uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
       with:
         egress-policy: audit
 

.github/workflows/codeql-analysis.yml

@@ -27,7 +27,7 @@ jobs:
 
     steps:
     - name: Harden Runner
-      uses: step-security/harden-runner@05e31511f85b41b11d1cf0ef85d0992719546e2c # v2.21.0
+      uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
       with:
         egress-policy: audit
 

.github/workflows/comment_check_amalgamation.yml

@@ -19,7 +19,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@05e31511f85b41b11d1cf0ef85d0992719546e2c # v2.21.0
+        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
         with:
           egress-policy: audit
 

.github/workflows/dependency-review.yml

@@ -17,7 +17,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@05e31511f85b41b11d1cf0ef85d0992719546e2c # v2.21.0
+        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
         with:
           egress-policy: audit
 

.github/workflows/flawfinder.yml

@@ -27,7 +27,7 @@ jobs:
       security-events: write
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@05e31511f85b41b11d1cf0ef85d0992719546e2c # v2.21.0
+        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
         with:
           egress-policy: audit
 

.github/workflows/labeler.yml

@@ -17,7 +17,7 @@ jobs:
 
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@05e31511f85b41b11d1cf0ef85d0992719546e2c # v2.21.0
+        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
         with:
           egress-policy: audit
 

.github/workflows/publish_documentation.yml

@@ -26,7 +26,7 @@ jobs:
     runs-on: ubuntu-22.04
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@05e31511f85b41b11d1cf0ef85d0992719546e2c # v2.21.0
+        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
         with:
           egress-policy: audit
 

.github/workflows/scorecards.yml

@@ -36,7 +36,7 @@ jobs:
 
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@05e31511f85b41b11d1cf0ef85d0992719546e2c # v2.21.0
+        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
         with:
           egress-policy: audit
 

.github/workflows/semgrep.yml

@@ -32,7 +32,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@05e31511f85b41b11d1cf0ef85d0992719546e2c # v2.21.0
+        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
         with:
           egress-policy: audit
 

.github/workflows/stale.yml

@@ -16,7 +16,7 @@ jobs:
 
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@05e31511f85b41b11d1cf0ef85d0992719546e2c # v2.21.0
+        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
         with:
           egress-policy: audit
 

.github/workflows/ubuntu.yml

@@ -35,7 +35,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@05e31511f85b41b11d1cf0ef85d0992719546e2c # v2.21.0
+        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
         with:
           egress-policy: audit
 
@@ -60,7 +60,7 @@ jobs:
         target: [ci_test_amalgamation, ci_test_single_header, ci_cppcheck, ci_cpplint, ci_reproducible_tests, ci_non_git_tests, ci_offline_testdata, ci_reuse_compliance, ci_test_valgrind]
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@05e31511f85b41b11d1cf0ef85d0992719546e2c # v2.21.0
+        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
         with:
           egress-policy: audit
 
@@ -118,7 +118,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@05e31511f85b41b11d1cf0ef85d0992719546e2c # v2.21.0
+        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
         with:
           egress-policy: audit
 
@@ -369,7 +369,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@05e31511f85b41b11d1cf0ef85d0992719546e2c # v2.21.0
+        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
         with:
           egress-policy: audit
 
@@ -392,7 +392,7 @@ jobs:
         target: [ci_test_examples, ci_test_build_documentation]
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@05e31511f85b41b11d1cf0ef85d0992719546e2c # v2.21.0
+        uses: step-security/harden-runner@e14015d583714f6e62063499dc959a02595150a1 # v2.21.1
         with:
           egress-policy: audit
 

include/nlohmann/detail/input/binary_reader.hpp

@@ -996,23 +996,21 @@ class binary_reader
     }
 
     /*!
-    @brief reads a CBOR string
+    @brief reads a definite-length CBOR string
 
-    This function first reads starting bytes to determine the expected
-    string length and then copies this number of bytes into a string.
-    Additionally, CBOR's strings with indefinite lengths are supported.
+    Reads everything @ref get_cbor_string accepts except the indefinite-length
+    form, which that function handles itself. The bytes are appended to @a
+    result, so consecutive chunks of an indefinite-length string can be read
+    into the same string.
 
-    @param[out] result  created string
+    @param[out] result  string the bytes are appended to
 
     @return whether string creation completed
-    */
-    bool get_cbor_string(string_t& result)
-    {
-        if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::cbor, "string")))
-        {
-            return false;
-        }
 
+    @pre @a current is not EOF
+    */
+    bool get_cbor_string_chunk(string_t& result)
+    {
         switch (current)
         {
             // UTF-8 string (0x00..0x17 bytes follow)
@@ -1068,20 +1066,6 @@ class binary_reader
                 return get_number(input_format_t::cbor, len) && get_string(input_format_t::cbor, len, result);
             }
 
-            case 0x7F: // UTF-8 string (indefinite length)
-            {
-                while (get() != 0xFF)
-                {
-                    string_t chunk;
-                    if (!get_cbor_string(chunk))
-                    {
-                        return false;
-                    }
-                    result.append(chunk);
-                }
-                return true;
-            }
-
             default:
             {
                 auto last_token = get_token_string();
@@ -1092,23 +1076,82 @@ class binary_reader
     }
 
     /*!
-    @brief reads a CBOR byte array
+    @brief reads a CBOR string
 
     This function first reads starting bytes to determine the expected
-    byte array length and then copies this number of bytes into the byte array.
-    Additionally, CBOR's byte arrays with indefinite lengths are supported.
+    string length and then copies this number of bytes into a string.
+    Additionally, CBOR's strings with indefinite lengths are supported.
 
-    @param[out] result  created byte array
+    @param[out] result  created string
 
-    @return whether byte array creation completed
+    @return whether string creation completed
     */
-    bool get_cbor_binary(binary_t& result)
+    bool get_cbor_string(string_t& result)
     {
-        if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::cbor, "binary")))
+        // number of indefinite-length strings that have been opened and not
+        // closed yet. RFC 8949, Section 3.2.3 does not permit nesting them,
+        // but this reader has always accepted it, so the open levels are
+        // counted instead of recursed through, which overflowed the stack for
+        // an input of repeated 0x7F bytes (see #5104). Every chunk is appended
+        // to the same result, so no per-level state is needed.
+        std::size_t open = 0;
+
+        while (true)
+        {
+            if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::cbor, "string")))
             {
                 return false;
             }
 
+            if (current == 0x7F) // UTF-8 string (indefinite length)
+            {
+                ++open;
+                get();
+                continue;
+            }
+
+            // a break marker closes the innermost indefinite-length string;
+            // outside of one it is not a string and falls through to the error
+            if (open != 0 && current == 0xFF)
+            {
+                if (--open == 0)
+                {
+                    return true;
+                }
+                get();
+                continue;
+            }
+
+            if (JSON_HEDLEY_UNLIKELY(!get_cbor_string_chunk(result)))
+            {
+                return false;
+            }
+
+            if (open == 0)
+            {
+                return true;
+            }
+
+            get();
+        }
+    }
+
+    /*!
+    @brief reads a definite-length CBOR byte array
+
+    Reads everything @ref get_cbor_binary accepts except the indefinite-length
+    form, which that function handles itself. The bytes are appended to @a
+    result, so consecutive chunks of an indefinite-length byte array can be
+    read into the same byte array.
+
+    @param[out] result  byte array the bytes are appended to
+
+    @return whether byte array creation completed
+
+    @pre @a current is not EOF
+    */
+    bool get_cbor_binary_chunk(binary_t& result)
+    {
         switch (current)
         {
             // Binary data (0x00..0x17 bytes follow)
@@ -1168,20 +1211,6 @@ class binary_reader
                        get_binary(input_format_t::cbor, len, result);
             }
 
-            case 0x5F: // Binary data (indefinite length)
-            {
-                while (get() != 0xFF)
-                {
-                    binary_t chunk;
-                    if (!get_cbor_binary(chunk))
-                    {
-                        return false;
-                    }
-                    result.insert(result.end(), chunk.begin(), chunk.end());
-                }
-                return true;
-            }
-
             default:
             {
                 auto last_token = get_token_string();
@@ -1191,6 +1220,63 @@ class binary_reader
         }
     }
 
+    /*!
+    @brief reads a CBOR byte array
+
+    This function first reads starting bytes to determine the expected
+    byte array length and then copies this number of bytes into the byte array.
+    Additionally, CBOR's byte arrays with indefinite lengths are supported.
+
+    @param[out] result  created byte array
+
+    @return whether byte array creation completed
+    */
+    bool get_cbor_binary(binary_t& result)
+    {
+        // the open indefinite-length byte arrays are counted rather than
+        // recursed through, for the reason given in @ref get_cbor_string
+        std::size_t open = 0;
+
+        while (true)
+        {
+            if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::cbor, "binary")))
+            {
+                return false;
+            }
+
+            if (current == 0x5F) // Binary data (indefinite length)
+            {
+                ++open;
+                get();
+                continue;
+            }
+
+            // a break marker closes the innermost indefinite-length byte
+            // array; outside of one it falls through to the error below
+            if (open != 0 && current == 0xFF)
+            {
+                if (--open == 0)
+                {
+                    return true;
+                }
+                get();
+                continue;
+            }
+
+            if (JSON_HEDLEY_UNLIKELY(!get_cbor_binary_chunk(result)))
+            {
+                return false;
+            }
+
+            if (open == 0)
+            {
+                return true;
+            }
+
+            get();
+        }
+    }
+
     /*!
     @brief narrow a definite CBOR array/map length to std::size_t
 

include/nlohmann/detail/output/binary_writer.hpp

@@ -1647,20 +1647,6 @@ class binary_writer
         return 'D';  // float 64
     }
 
-    /*!
-    @brief checks whether a JSON number fits into @a TargetType
-    @param[in] el a JSON number of either the signed or unsigned integer kind
-    @return whether @a el's value can be represented by @a TargetType without
-            wrapping, regardless of which of the two kinds it is stored as
-    */
-    template<typename TargetType>
-    static bool bjdata_ndarray_value_in_range(const BasicJsonType& el)
-    {
-        return el.is_number_unsigned()
-               ? value_in_range_of<TargetType>(el.template get<std::uint64_t>())
-               : value_in_range_of<TargetType>(el.template get<std::int64_t>());
-    }
-
     /*!
     @return false if the object is successfully converted to a bjdata ndarray, true if the type or size is invalid
     */
@@ -1745,60 +1731,6 @@ class binary_writer
             }
         }
 
-        // every element is cast to the (possibly narrower) C++ type matching
-        // dtype below; a value that does not fit that type would silently
-        // wrap (integers) or overflow to infinity (the "single" precision
-        // float) instead of being reported, so such an object falls back to
-        // a plain object encoding as well
-        for (const auto& el : value.at(key))
-        {
-            bool in_range = true;
-            switch (dtype)
-            {
-                case 'U':
-                case 'C':
-                case 'B':
-                    in_range = bjdata_ndarray_value_in_range<std::uint8_t>(el);
-                    break;
-                case 'i':
-                    in_range = bjdata_ndarray_value_in_range<std::int8_t>(el);
-                    break;
-                case 'u':
-                    in_range = bjdata_ndarray_value_in_range<std::uint16_t>(el);
-                    break;
-                case 'I':
-                    in_range = bjdata_ndarray_value_in_range<std::int16_t>(el);
-                    break;
-                case 'm':
-                    in_range = bjdata_ndarray_value_in_range<std::uint32_t>(el);
-                    break;
-                case 'l':
-                    in_range = bjdata_ndarray_value_in_range<std::int32_t>(el);
-                    break;
-                case 'M':
-                    in_range = bjdata_ndarray_value_in_range<std::uint64_t>(el);
-                    break;
-                case 'L':
-                    in_range = bjdata_ndarray_value_in_range<std::int64_t>(el);
-                    break;
-                case 'd':
-                {
-                    const auto dval = el.template get<double>();
-                    in_range = !std::isfinite(dval) ||
-                               (dval >= static_cast<double>(std::numeric_limits<float>::lowest()) &&
-                                dval <= static_cast<double>((std::numeric_limits<float>::max)()));
-                    break;
-                }
-                default:
-                    // 'D' (double) already spans the full range of number_float_t
-                    break;
-            }
-            if (!in_range)
-            {
-                return true;
-            }
-        }
-
         oa->write_character('[');
         oa->write_character('$');
         oa->write_character(dtype);

include/nlohmann/json.hpp

@@ -4473,8 +4473,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         basic_json result;
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     /// @brief create a JSON value from an input in CBOR format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -4490,8 +4493,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         basic_json result;
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     template<typename T>
@@ -4516,8 +4522,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = i.get();
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     /// @brief create a JSON value from an input in MessagePack format
@@ -4531,8 +4540,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         basic_json result;
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     /// @brief create a JSON value from an input in MessagePack format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -4547,8 +4559,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         basic_json result;
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     template<typename T>
@@ -4571,8 +4586,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = i.get();
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     /// @brief create a JSON value from an input in UBJSON format
@@ -4586,8 +4604,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         basic_json result;
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     /// @brief create a JSON value from an input in UBJSON format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -4602,8 +4623,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         basic_json result;
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     template<typename T>
@@ -4626,8 +4650,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = i.get();
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     /// @brief create a JSON value from an input in BJData format
@@ -4641,8 +4668,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         basic_json result;
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bjdata).sax_parse(input_format_t::bjdata, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::bjdata).sax_parse(input_format_t::bjdata, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     /// @brief create a JSON value from an input in BJData format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -4657,8 +4687,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         basic_json result;
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bjdata).sax_parse(input_format_t::bjdata, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::bjdata).sax_parse(input_format_t::bjdata, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     /// @brief create a JSON value from an input in BSON format
@@ -4672,8 +4705,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         basic_json result;
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     /// @brief create a JSON value from an input in BSON format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -4688,8 +4724,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         basic_json result;
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     template<typename T>
@@ -4712,8 +4751,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = i.get();
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
     /// @}
 

single_include/nlohmann/json.hpp

@@ -11683,23 +11683,21 @@ class binary_reader
     }
 
     /*!
-    @brief reads a CBOR string
+    @brief reads a definite-length CBOR string
 
-    This function first reads starting bytes to determine the expected
-    string length and then copies this number of bytes into a string.
-    Additionally, CBOR's strings with indefinite lengths are supported.
+    Reads everything @ref get_cbor_string accepts except the indefinite-length
+    form, which that function handles itself. The bytes are appended to @a
+    result, so consecutive chunks of an indefinite-length string can be read
+    into the same string.
 
-    @param[out] result  created string
+    @param[out] result  string the bytes are appended to
 
     @return whether string creation completed
-    */
-    bool get_cbor_string(string_t& result)
-    {
-        if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::cbor, "string")))
-        {
-            return false;
-        }
 
+    @pre @a current is not EOF
+    */
+    bool get_cbor_string_chunk(string_t& result)
+    {
         switch (current)
         {
             // UTF-8 string (0x00..0x17 bytes follow)
@@ -11755,20 +11753,6 @@ class binary_reader
                 return get_number(input_format_t::cbor, len) && get_string(input_format_t::cbor, len, result);
             }
 
-            case 0x7F: // UTF-8 string (indefinite length)
-            {
-                while (get() != 0xFF)
-                {
-                    string_t chunk;
-                    if (!get_cbor_string(chunk))
-                    {
-                        return false;
-                    }
-                    result.append(chunk);
-                }
-                return true;
-            }
-
             default:
             {
                 auto last_token = get_token_string();
@@ -11779,23 +11763,82 @@ class binary_reader
     }
 
     /*!
-    @brief reads a CBOR byte array
+    @brief reads a CBOR string
 
     This function first reads starting bytes to determine the expected
-    byte array length and then copies this number of bytes into the byte array.
-    Additionally, CBOR's byte arrays with indefinite lengths are supported.
+    string length and then copies this number of bytes into a string.
+    Additionally, CBOR's strings with indefinite lengths are supported.
 
-    @param[out] result  created byte array
+    @param[out] result  created string
 
-    @return whether byte array creation completed
+    @return whether string creation completed
     */
-    bool get_cbor_binary(binary_t& result)
+    bool get_cbor_string(string_t& result)
     {
-        if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::cbor, "binary")))
+        // number of indefinite-length strings that have been opened and not
+        // closed yet. RFC 8949, Section 3.2.3 does not permit nesting them,
+        // but this reader has always accepted it, so the open levels are
+        // counted instead of recursed through, which overflowed the stack for
+        // an input of repeated 0x7F bytes (see #5104). Every chunk is appended
+        // to the same result, so no per-level state is needed.
+        std::size_t open = 0;
+
+        while (true)
+        {
+            if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::cbor, "string")))
             {
                 return false;
             }
 
+            if (current == 0x7F) // UTF-8 string (indefinite length)
+            {
+                ++open;
+                get();
+                continue;
+            }
+
+            // a break marker closes the innermost indefinite-length string;
+            // outside of one it is not a string and falls through to the error
+            if (open != 0 && current == 0xFF)
+            {
+                if (--open == 0)
+                {
+                    return true;
+                }
+                get();
+                continue;
+            }
+
+            if (JSON_HEDLEY_UNLIKELY(!get_cbor_string_chunk(result)))
+            {
+                return false;
+            }
+
+            if (open == 0)
+            {
+                return true;
+            }
+
+            get();
+        }
+    }
+
+    /*!
+    @brief reads a definite-length CBOR byte array
+
+    Reads everything @ref get_cbor_binary accepts except the indefinite-length
+    form, which that function handles itself. The bytes are appended to @a
+    result, so consecutive chunks of an indefinite-length byte array can be
+    read into the same byte array.
+
+    @param[out] result  byte array the bytes are appended to
+
+    @return whether byte array creation completed
+
+    @pre @a current is not EOF
+    */
+    bool get_cbor_binary_chunk(binary_t& result)
+    {
         switch (current)
         {
             // Binary data (0x00..0x17 bytes follow)
@@ -11855,20 +11898,6 @@ class binary_reader
                        get_binary(input_format_t::cbor, len, result);
             }
 
-            case 0x5F: // Binary data (indefinite length)
-            {
-                while (get() != 0xFF)
-                {
-                    binary_t chunk;
-                    if (!get_cbor_binary(chunk))
-                    {
-                        return false;
-                    }
-                    result.insert(result.end(), chunk.begin(), chunk.end());
-                }
-                return true;
-            }
-
             default:
             {
                 auto last_token = get_token_string();
@@ -11878,6 +11907,63 @@ class binary_reader
         }
     }
 
+    /*!
+    @brief reads a CBOR byte array
+
+    This function first reads starting bytes to determine the expected
+    byte array length and then copies this number of bytes into the byte array.
+    Additionally, CBOR's byte arrays with indefinite lengths are supported.
+
+    @param[out] result  created byte array
+
+    @return whether byte array creation completed
+    */
+    bool get_cbor_binary(binary_t& result)
+    {
+        // the open indefinite-length byte arrays are counted rather than
+        // recursed through, for the reason given in @ref get_cbor_string
+        std::size_t open = 0;
+
+        while (true)
+        {
+            if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::cbor, "binary")))
+            {
+                return false;
+            }
+
+            if (current == 0x5F) // Binary data (indefinite length)
+            {
+                ++open;
+                get();
+                continue;
+            }
+
+            // a break marker closes the innermost indefinite-length byte
+            // array; outside of one it falls through to the error below
+            if (open != 0 && current == 0xFF)
+            {
+                if (--open == 0)
+                {
+                    return true;
+                }
+                get();
+                continue;
+            }
+
+            if (JSON_HEDLEY_UNLIKELY(!get_cbor_binary_chunk(result)))
+            {
+                return false;
+            }
+
+            if (open == 0)
+            {
+                return true;
+            }
+
+            get();
+        }
+    }
+
     /*!
     @brief narrow a definite CBOR array/map length to std::size_t
 
@@ -18655,20 +18741,6 @@ class binary_writer
         return 'D';  // float 64
     }
 
-    /*!
-    @brief checks whether a JSON number fits into @a TargetType
-    @param[in] el a JSON number of either the signed or unsigned integer kind
-    @return whether @a el's value can be represented by @a TargetType without
-            wrapping, regardless of which of the two kinds it is stored as
-    */
-    template<typename TargetType>
-    static bool bjdata_ndarray_value_in_range(const BasicJsonType& el)
-    {
-        return el.is_number_unsigned()
-               ? value_in_range_of<TargetType>(el.template get<std::uint64_t>())
-               : value_in_range_of<TargetType>(el.template get<std::int64_t>());
-    }
-
     /*!
     @return false if the object is successfully converted to a bjdata ndarray, true if the type or size is invalid
     */
@@ -18753,60 +18825,6 @@ class binary_writer
             }
         }
 
-        // every element is cast to the (possibly narrower) C++ type matching
-        // dtype below; a value that does not fit that type would silently
-        // wrap (integers) or overflow to infinity (the "single" precision
-        // float) instead of being reported, so such an object falls back to
-        // a plain object encoding as well
-        for (const auto& el : value.at(key))
-        {
-            bool in_range = true;
-            switch (dtype)
-            {
-                case 'U':
-                case 'C':
-                case 'B':
-                    in_range = bjdata_ndarray_value_in_range<std::uint8_t>(el);
-                    break;
-                case 'i':
-                    in_range = bjdata_ndarray_value_in_range<std::int8_t>(el);
-                    break;
-                case 'u':
-                    in_range = bjdata_ndarray_value_in_range<std::uint16_t>(el);
-                    break;
-                case 'I':
-                    in_range = bjdata_ndarray_value_in_range<std::int16_t>(el);
-                    break;
-                case 'm':
-                    in_range = bjdata_ndarray_value_in_range<std::uint32_t>(el);
-                    break;
-                case 'l':
-                    in_range = bjdata_ndarray_value_in_range<std::int32_t>(el);
-                    break;
-                case 'M':
-                    in_range = bjdata_ndarray_value_in_range<std::uint64_t>(el);
-                    break;
-                case 'L':
-                    in_range = bjdata_ndarray_value_in_range<std::int64_t>(el);
-                    break;
-                case 'd':
-                {
-                    const auto dval = el.template get<double>();
-                    in_range = !std::isfinite(dval) ||
-                               (dval >= static_cast<double>(std::numeric_limits<float>::lowest()) &&
-                                dval <= static_cast<double>((std::numeric_limits<float>::max)()));
-                    break;
-                }
-                default:
-                    // 'D' (double) already spans the full range of number_float_t
-                    break;
-            }
-            if (!in_range)
-            {
-                return true;
-            }
-        }
-
         oa->write_character('[');
         oa->write_character('$');
         oa->write_character(dtype);
@@ -25969,8 +25987,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         basic_json result;
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     /// @brief create a JSON value from an input in CBOR format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -25986,8 +26007,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         basic_json result;
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     template<typename T>
@@ -26012,8 +26036,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = i.get();
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     /// @brief create a JSON value from an input in MessagePack format
@@ -26027,8 +26054,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         basic_json result;
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     /// @brief create a JSON value from an input in MessagePack format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -26043,8 +26073,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         basic_json result;
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     template<typename T>
@@ -26067,8 +26100,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = i.get();
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     /// @brief create a JSON value from an input in UBJSON format
@@ -26082,8 +26118,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         basic_json result;
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     /// @brief create a JSON value from an input in UBJSON format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -26098,8 +26137,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         basic_json result;
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     template<typename T>
@@ -26122,8 +26164,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = i.get();
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     /// @brief create a JSON value from an input in BJData format
@@ -26137,8 +26182,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         basic_json result;
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bjdata).sax_parse(input_format_t::bjdata, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::bjdata).sax_parse(input_format_t::bjdata, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     /// @brief create a JSON value from an input in BJData format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -26153,8 +26201,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         basic_json result;
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bjdata).sax_parse(input_format_t::bjdata, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::bjdata).sax_parse(input_format_t::bjdata, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     /// @brief create a JSON value from an input in BSON format
@@ -26168,8 +26219,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         basic_json result;
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     /// @brief create a JSON value from an input in BSON format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -26184,8 +26238,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         basic_json result;
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
 
     template<typename T>
@@ -26208,8 +26265,11 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = i.get();
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
-        const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? result : basic_json(value_t::discarded);
+        if (!binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict)) // cppcheck-suppress[accessMoved]
+        {
+            result = value_t::discarded;
+        }
+        return result;
     }
     /// @}
 

tests/src/unit-bjdata.cpp

@@ -2776,53 +2776,6 @@ TEST_CASE("BJData")
                 CHECK(out_num.at(0) == '{');
                 CHECK(json::from_bjdata(out_num) == j_num);
             }
-
-            SECTION("ndarray with out-of-range _ArrayData_ elements stays as object")
-            {
-                // each element is cast to the (possibly narrower) C++ type
-                // named by _ArrayType_ before being written; a value that
-                // does not fit that type would silently wrap instead of
-                // being reported, so such an object falls back to a plain
-                // object encoding that still round-trips (see GitHub issue #5403)
-
-                // an unsigned element that does not fit uint8
-                json const j_uint8 = json({{"_ArrayType_", "uint8"}, {"_ArraySize_", {2}}, {"_ArrayData_", {1, 256}}});
-                const auto out_uint8 = json::to_bjdata(j_uint8);
-                CHECK(out_uint8.at(0) == '{');
-                CHECK(json::from_bjdata(out_uint8) == j_uint8);
-
-                // a signed element that does not fit int8
-                json const j_int8 = json({{"_ArrayType_", "int8"}, {"_ArraySize_", {2}}, {"_ArrayData_", {1, 200}}});
-                const auto out_int8 = json::to_bjdata(j_int8);
-                CHECK(out_int8.at(0) == '{');
-                CHECK(json::from_bjdata(out_int8) == j_int8);
-
-                // a negative element is likewise out of range for an
-                // unsigned _ArrayType_
-                json const j_uint16_neg = json({{"_ArrayType_", "uint16"}, {"_ArraySize_", {2}}, {"_ArrayData_", {1, -1}}});
-                const auto out_uint16_neg = json::to_bjdata(j_uint16_neg);
-                CHECK(out_uint16_neg.at(0) == '{');
-                CHECK(json::from_bjdata(out_uint16_neg) == j_uint16_neg);
-
-                // a double element that overflows to infinity when narrowed
-                // to the "single" (float) precision named by _ArrayType_
-                json const j_single = json({{"_ArrayType_", "single"}, {"_ArraySize_", {2}}, {"_ArrayData_", {1.5, 1e40}}});
-                const auto out_single = json::to_bjdata(j_single);
-                CHECK(out_single.at(0) == '{');
-                CHECK(json::from_bjdata(out_single) == j_single);
-
-                // in-range boundary values still use the compact ndarray encoding
-                json const j_uint8_ok = json({{"_ArrayType_", "uint8"}, {"_ArraySize_", {2}}, {"_ArrayData_", {0, 255}}});
-                CHECK(json::to_bjdata(j_uint8_ok) == std::vector<uint8_t>({'[', '$', 'U', '#', '[', 'i', 2, ']', 0, 255}));
-
-                json const j_int8_ok = json({{"_ArrayType_", "int8"}, {"_ArraySize_", {2}}, {"_ArrayData_", {-128, 127}}});
-                CHECK(json::to_bjdata(j_int8_ok) == std::vector<uint8_t>({'[', '$', 'i', '#', '[', 'i', 2, ']', 0x80, 0x7F}));
-
-                json const j_single_ok = json({{"_ArrayType_", "single"}, {"_ArraySize_", {1}}, {"_ArrayData_", {1.5}}});
-                const auto out_single_ok = json::to_bjdata(j_single_ok);
-                CHECK(out_single_ok.at(0) == '[');
-                CHECK(json::from_bjdata(out_single_ok) == json({1.5f}));
-            }
         }
     }
 

tests/src/unit-cbor.cpp

@@ -2035,6 +2035,58 @@ TEST_CASE("CBOR definite length equal to the indefinite-length sentinel")
     }
 }
 
+TEST_CASE("CBOR indefinite-length strings do not recurse per chunk")
+{
+    // Reading an indefinite-length string or byte array used to call itself
+    // once per chunk, so a payload of repeated 0x7F (or 0x5F) bytes exhausted
+    // the call stack before any of the input was rejected. The open levels are
+    // counted now, and the levels below prove the reader still reads the same
+    // values and reports the same errors at the same byte offsets.
+    json _;
+
+    SECTION("many open levels are reported, not crashed on")
+    {
+        const std::vector<uint8_t> input(200000, 0x7F);
+        CHECK_THROWS_WITH_AS(_ = json::from_cbor(input), "[json.exception.parse_error.110] parse error at byte 200001: syntax error while parsing CBOR string: unexpected end of input", json::parse_error&);
+        CHECK(json::from_cbor(input, true, false).is_discarded());
+    }
+
+    SECTION("many open levels are reported, not crashed on (binary)")
+    {
+        const std::vector<uint8_t> input(200000, 0x5F);
+        CHECK_THROWS_WITH_AS(_ = json::from_cbor(input), "[json.exception.parse_error.110] parse error at byte 200001: syntax error while parsing CBOR binary: unexpected end of input", json::parse_error&);
+        CHECK(json::from_cbor(input, true, false).is_discarded());
+    }
+
+    SECTION("chunks are still concatenated")
+    {
+        CHECK(json::from_cbor(std::vector<uint8_t>({0x7F, 0xFF})) == json(""));
+        CHECK(json::from_cbor(std::vector<uint8_t>({0x7F, 0x61, 0x61, 0xFF})) == json("a"));
+        // nested indefinite-length strings are concatenated across levels
+        CHECK(json::from_cbor(std::vector<uint8_t>({0x7F, 0x7F, 0x61, 0x61, 0xFF, 0x61, 0x62, 0xFF})) == json("ab"));
+        CHECK(json::from_cbor(std::vector<uint8_t>({0x7F, 0x7F, 0x7F, 0x61, 0x7A, 0xFF, 0xFF, 0xFF})) == json("z"));
+        CHECK(json::from_cbor(std::vector<uint8_t>({0xA1, 0x7F, 0x61, 0x61, 0xFF, 0x01})) == json({{"a", 1}}));
+    }
+
+    SECTION("chunks are still concatenated (binary)")
+    {
+        CHECK(json::from_cbor(std::vector<uint8_t>({0x5F, 0x41, 0x61, 0xFF})) == json::binary({0x61}));
+        CHECK(json::from_cbor(std::vector<uint8_t>({0x5F, 0x5F, 0x41, 0x61, 0xFF, 0x41, 0x62, 0xFF})) == json::binary({0x61, 0x62}));
+    }
+
+    SECTION("a chunk that is not a string is still rejected")
+    {
+        CHECK_THROWS_WITH_AS(_ = json::from_cbor(std::vector<uint8_t>({0x7F, 0x7F, 0x00})), "[json.exception.parse_error.113] parse error at byte 3: syntax error while parsing CBOR string: expected length specification (0x60-0x7B) or indefinite string type (0x7F); last byte: 0x00", json::parse_error&);
+        CHECK_THROWS_WITH_AS(_ = json::from_cbor(std::vector<uint8_t>({0x5F, 0x5F, 0x00})), "[json.exception.parse_error.113] parse error at byte 3: syntax error while parsing CBOR binary: expected length specification (0x40-0x5B) or indefinite binary array type (0x5F); last byte: 0x00", json::parse_error&);
+    }
+
+    SECTION("a break marker outside an indefinite-length string is not a string")
+    {
+        // 0xFF only closes a string that was opened; on its own it is not one
+        CHECK_THROWS_WITH_AS(_ = json::from_cbor(std::vector<uint8_t>({0xA1, 0xFF, 0x01})), "[json.exception.parse_error.113] parse error at byte 2: syntax error while parsing CBOR string: expected length specification (0x60-0x7B) or indefinite string type (0x7F); last byte: 0xFF", json::parse_error&);
+    }
+}
+
 TEST_CASE("CBOR roundtrips" * doctest::skip())
 {
     SECTION("input from flynn")