Extend memcpy fast path to sized sentinels (e.g. std::counted_iterator)

Extend the memcpy fast path in iterator_input_adapter to sized
sentinels of a different type, not just same-type iterator pairs.
std::counted_iterator paired with std::default_sentinel_t already
satisfies std::contiguous_iterator and std::sized_sentinel_for, so
std::ranges::distance (C++20) lets that combination reach the fast
path too, instead of silently falling back to the byte-by-byte path.

- iterator_is_contiguous now also allows std::sized_sentinel_for<SentinelType,
  IteratorType> under C++20, gated the same way as the existing
  std::contiguous_iterator detection.
- get_elements_impl's fast path uses std::ranges::distance under C++20
  (works for both same-type and sized-sentinel pairs) and falls back to
  std::distance pre-C++20, where SentinelType is always IteratorType.
- Add a C++20-only test exercising json::parse/accept with
  std::counted_iterator + std::default_sentinel_t.
- Document std::default_sentinel_t + std::counted_iterator as a
  SentinelType example across parse.md, accept.md, sax_parse.md, and
  the five from_*.md pages, replacing an earlier ambiguously worded
  bullet.

Addresses review feedback: https://github.com/nlohmann/json/pull/5265#discussion_r3564237584

Signed-off-by: Niels Lohmann <mail@nlohmann.me>

.github/workflows/codeql-analysis.yml

@@ -38,14 +38,14 @@ jobs:
 
     # Initializes the CodeQL tools for scanning.
     - name: Initialize CodeQL
-      uses: github/codeql-action/init@99df26d4f13ea111d4ec1a7dddef6063f76b97e9 # v4.37.0
+      uses: github/codeql-action/init@54f647b7e1bb85c95cddabcd46b0c578ec92bc1a # v4.36.3
       with:
         languages: c-cpp
 
     # Autobuild attempts to build any compiled languages  (C/C++, C#, or Java).
     # If this step fails, then you should remove it and run the build manually (see below)
     - name: Autobuild
-      uses: github/codeql-action/autobuild@99df26d4f13ea111d4ec1a7dddef6063f76b97e9 # v4.37.0
+      uses: github/codeql-action/autobuild@54f647b7e1bb85c95cddabcd46b0c578ec92bc1a # v4.36.3
 
     - name: Perform CodeQL Analysis
-      uses: github/codeql-action/analyze@99df26d4f13ea111d4ec1a7dddef6063f76b97e9 # v4.37.0
+      uses: github/codeql-action/analyze@54f647b7e1bb85c95cddabcd46b0c578ec92bc1a # v4.36.3

.github/workflows/flawfinder.yml

@@ -43,6 +43,6 @@ jobs:
           output: 'flawfinder_results.sarif'
 
       - name: Upload analysis results to GitHub Security tab
-        uses: github/codeql-action/upload-sarif@99df26d4f13ea111d4ec1a7dddef6063f76b97e9 # v4.37.0
+        uses: github/codeql-action/upload-sarif@54f647b7e1bb85c95cddabcd46b0c578ec92bc1a # v4.36.3
         with:
           sarif_file: ${{github.workspace}}/flawfinder_results.sarif

.github/workflows/scorecards.yml

@@ -76,6 +76,6 @@ jobs:
 
       # Upload the results to GitHub's code scanning dashboard.
       - name: "Upload to code-scanning"
-        uses: github/codeql-action/upload-sarif@99df26d4f13ea111d4ec1a7dddef6063f76b97e9 # v4.37.0
+        uses: github/codeql-action/upload-sarif@54f647b7e1bb85c95cddabcd46b0c578ec92bc1a # v4.36.3
         with:
           sarif_file: results.sarif

.github/workflows/semgrep.yml

@@ -61,7 +61,7 @@ jobs:
 
       # Upload SARIF file generated in previous step
       - name: Upload SARIF file
-        uses: github/codeql-action/upload-sarif@99df26d4f13ea111d4ec1a7dddef6063f76b97e9 # v4.37.0
+        uses: github/codeql-action/upload-sarif@54f647b7e1bb85c95cddabcd46b0c578ec92bc1a # v4.36.3
         with:
           sarif_file: semgrep.sarif
         if: always()

.github/workflows/stale.yml

@@ -20,7 +20,7 @@ jobs:
         with:
           egress-policy: audit
 
-      - uses: actions/stale@1e223db275d687790206a7acac4d1a11bd6fe629 # v10.4.0
+      - uses: actions/stale@eb5cf3af3ac0a1aa4c9c45633dd1ae542a27a899 # v10.3.0
         with:
           stale-issue-label: 'state: stale'
           stale-pr-label: 'state: stale'

docs/mkdocs/docs/api/basic_json/binary_t.md

@@ -51,38 +51,6 @@ represent a byte array in modern C++.
 
 The default values for `BinaryType` is `#!cpp std::vector<std::uint8_t>`.
 
-#### Custom BinaryType behavior
-
-When a custom `BinaryType` is configured (other than the default `#!cpp std::vector<std::uint8_t>`), you can assign
-values of that type directly to a `basic_json` instance, and they will automatically be recognized as binary values
-rather than arrays:
-
-```cpp
-using custom_json = nlohmann::basic_json<
-    nlohmann::ordered_map,  // ObjectType
-    std::vector,            // ArrayType
-    std::string,            // StringType
-    bool,                   // BooleanType
-    std::int64_t,           // NumberIntegerType
-    std::uint64_t,          // NumberUnsignedType
-    double,                 // NumberFloatType
-    std::allocator,         // AllocatorType
-    nlohmann::adl_serializer,
-    std::vector<std::byte>  // Custom BinaryType
->;
-
-std::vector<std::byte> data{std::byte{1}, std::byte{2}, std::byte{3}};
-custom_json j = data;  // Creates a binary value, not an array
-assert(j.is_binary());
-
-// Round-tripping works seamlessly
-auto extracted = j.get<std::vector<std::byte>>();
-assert(extracted == data);
-```
-
-This automatic type detection is a convenience feature that only applies to custom (non-default) `BinaryType` configurations.
-The default `nlohmann::json` continues to treat `#!cpp std::vector<std::uint8_t>` as arrays for backward compatibility.
-
 #### Storage
 
 Binary Arrays are stored as pointers in a `basic_json` type. That is, for any access to array values, a pointer of the

docs/mkdocs/docs/api/macros/index.md

@@ -24,7 +24,6 @@ header. See also the [macro overview page](../../features/macros.md).
 - [**JSON_NO_IO**](json_no_io.md) - switch off functions relying on certain C++ I/O headers
 - [**JSON_SKIP_UNSUPPORTED_COMPILER_CHECK**](json_skip_unsupported_compiler_check.md) - do not warn about unsupported compilers
 - [**JSON_USE_GLOBAL_UDLS**](json_use_global_udls.md) - place user-defined string literals (UDLs) into the global namespace
-- [**JSON_USE_SIMDUTF**](json_use_simdutf.md) - use the simdutf library to accelerate UTF-8 validation
 
 ## Library version
 

docs/mkdocs/docs/api/macros/json_diagnostics.md

@@ -38,8 +38,7 @@ When the macro is not defined, the library will define it to its default value.
 
     Diagnostic messages can also be controlled with the CMake option
     [`JSON_Diagnostics`](../../integration/cmake.md#json_diagnostics) (`OFF` by default)
-    which defines `JSON_DIAGNOSTICS` accordingly. Note this only applies when building the
-    library from source — see the pre-installed-package caveat on that page.
+    which defines `JSON_DIAGNOSTICS` accordingly.
 
 ## Examples
 

docs/mkdocs/docs/api/macros/json_use_simdutf.md

@@ -1,52 +0,0 @@
-# JSON_USE_SIMDUTF
-
-```cpp
-#define JSON_USE_SIMDUTF
-```
-
-When defined, the parser validates the UTF-8 content of JSON strings that come from a **contiguous byte input**
-(`std::string`, `std::vector<char>`/`<std::uint8_t>`, string literals, `const char*` ranges, …) using the
-[simdutf](https://github.com/simdutf/simdutf) library instead of the built-in scalar validator. On text with many
-non-ASCII characters (e.g. CJK or emoji) this can validate several times faster.
-
-This is an **opt-in external dependency**. The library itself remains header-only and its behavior is unchanged: the
-same input is accepted or rejected either way, and every parse error is reported at the same position with the same
-message (simdutf is only used to fast-path *valid* runs; anything it flags falls back to the scalar path so the exact
-diagnostic is preserved). Streaming inputs (files, `std::istream`, wide strings, user-defined adapters) always use the
-scalar path.
-
-When `JSON_USE_SIMDUTF` is defined you must make the `simdutf.h` header available on the include path and link the
-simdutf library. When it is not defined, no simdutf header is included and there is no dependency.
-
-## Default definition
-
-By default, `#!cpp JSON_USE_SIMDUTF` is not defined and the portable C++11 scalar validator is used.
-
-```cpp
-#undef JSON_USE_SIMDUTF
-```
-
-## Examples
-
-??? example
-
-    The code below enables the simdutf backend for UTF-8 validation.
-
-    ```cpp
-    #define JSON_USE_SIMDUTF 1
-    #include <simdutf.h>
-    #include <nlohmann/json.hpp>
-
-    ...
-    ```
-
-    The project must also link against simdutf, e.g. with CMake:
-
-    ```cmake
-    target_compile_definitions(your_target PRIVATE JSON_USE_SIMDUTF)
-    target_link_libraries(your_target PRIVATE simdutf::simdutf)
-    ```
-
-## Version history
-
-- Added in version 3.12.1.

docs/mkdocs/docs/features/conversions.md

@@ -47,28 +47,6 @@ json j = {{"one", 1}, {"two", 2}};
 auto m = j.get<std::map<std::string, int>>();  // {{"one", 1}, {"two", 2}}
 ```
 
-`#!cpp std::pair` and `#!cpp std::tuple` are also supported, converting positionally to and from a JSON array:
-
-```cpp
-json j = {1.0, "hello", 42};
-auto t = j.get<std::tuple<double, std::string, int>>();  // {1.0, "hello", 42}
-```
-
-!!! info "Extracting references into a tuple"
-
-    A tuple type may also hold references (e.g. `#!cpp std::tuple<double&, std::string&>`) to avoid copying: `get`
-    then returns a tuple of references pointing directly at the elements stored inside the `basic_json` array,
-    rather than a tuple of copies:
-
-    ```cpp
-    json j = {1.0, "hello"};
-    auto refs = j.get<std::tuple<double&, std::string&>>();
-    std::get<1>(refs) = "world";  // modifies j[1] in place
-    ```
-
-    A referenced type must be one the library actually stores (or an arithmetic type it can convert to/from);
-    otherwise this is a compile error.
-
 ## Implicit conversions
 
 By default, a JSON value implicitly converts to a compatible C++ type, so the explicit `get` call can often be omitted:
@@ -158,20 +136,6 @@ std::vector<int> numbers = {1, 2, 3};
 json j = numbers;   // [1,2,3]
 ```
 
-!!! info "Constructing from a C++20 range view"
-
-    A `json` array can also be constructed directly from a C++20 range view (`std::ranges::view`), such as the result
-    of `std::views::filter` or `std::views::transform` -- no intermediate container is needed:
-
-    ```cpp
-    std::vector<int> nums{1, 2, 37, 42, 21};
-    auto filtered = nums | std::views::filter([](int i) { return i > 10; });
-    json j(filtered);   // [37,42,21]
-    ```
-
-    This requires [`JSON_HAS_RANGES`](../api/macros/json_has_ranges.md) to be enabled and is unavailable on MinGW due
-    to incomplete C++20 ranges support there.
-
 ## Your own types
 
 The conversions above are built in for standard types. To make the same syntax work for **your own** types, provide

docs/mkdocs/docs/integration/cmake.md

@@ -135,31 +135,6 @@ Enable CI build targets. The exact targets are used during the several CI steps
 
 Enable [extended diagnostic messages](../home/exceptions.md#extended-diagnostic-messages) by defining macro [`JSON_DIAGNOSTICS`](../api/macros/json_diagnostics.md). This option is `OFF` by default.
 
-!!! warning "Does not apply to a pre-installed package"
-
-    This option only takes effect when building nlohmann/json from source as part of your own
-    CMake project (e.g. via [`FetchContent`](#fetchcontent) or [`add_subdirectory`](#external)).
-    It has **no effect** on a package that was already built and installed elsewhere (Homebrew,
-    vcpkg, a system package, etc.) — the resulting compile definition is baked into the exported
-    `nlohmann_jsonTargets.cmake` at install time, and `set(JSON_Diagnostics ON)` before
-    `find_package()` does not change it (verified against the Homebrew-installed package: the
-    exported target still carries a fixed `$<$<BOOL:OFF>:JSON_DIAGNOSTICS=1>`, regardless of any
-    variable set in the consuming project).
-
-    To enable extended diagnostics for a pre-installed package, override the imported target's
-    property directly after `find_package()`:
-
-    ```cmake
-    find_package(nlohmann_json REQUIRED)
-    set_target_properties(nlohmann_json::nlohmann_json PROPERTIES
-        INTERFACE_COMPILE_DEFINITIONS "JSON_DIAGNOSTICS=1")
-    ```
-
-    This only works cleanly when your project is the sole consumer of that imported target. If
-    nlohmann_json is pulled in from more than one place in your dependency graph with different
-    `JSON_DIAGNOSTICS` values, you may see a `"JSON_DIAGNOSTICS" redefined` compiler error, since
-    conflicting `-D` flags can end up on the same compile command line.
-
 ### `JSON_Diagnostic_Positions`
 
 Enable position diagnostics by defining macro [`JSON_DIAGNOSTIC_POSITIONS`](../api/macros/json_diagnostic_positions.md). This option is `OFF` by default.

docs/mkdocs/mkdocs.yml

@@ -296,7 +296,6 @@ nav:
           - 'JSON_USE_GLOBAL_UDLS': api/macros/json_use_global_udls.md
           - 'JSON_USE_IMPLICIT_CONVERSIONS': api/macros/json_use_implicit_conversions.md
           - 'JSON_USE_LEGACY_DISCARDED_VALUE_COMPARISON': api/macros/json_use_legacy_discarded_value_comparison.md
-          - 'JSON_USE_SIMDUTF': api/macros/json_use_simdutf.md
           - 'NLOHMANN_DEFINE_DERIVED_TYPE_INTRUSIVE, NLOHMANN_DEFINE_DERIVED_TYPE_INTRUSIVE_WITH_DEFAULT, NLOHMANN_DEFINE_DERIVED_TYPE_INTRUSIVE_ONLY_SERIALIZE, NLOHMANN_DEFINE_DERIVED_TYPE_NON_INTRUSIVE, NLOHMANN_DEFINE_DERIVED_TYPE_NON_INTRUSIVE_WITH_DEFAULT, NLOHMANN_DEFINE_DERIVED_TYPE_NON_INTRUSIVE_ONLY_SERIALIZE': api/macros/nlohmann_define_derived_type.md
           - 'NLOHMANN_DEFINE_TYPE_INTRUSIVE, NLOHMANN_DEFINE_TYPE_INTRUSIVE_WITH_DEFAULT, NLOHMANN_DEFINE_TYPE_INTRUSIVE_ONLY_SERIALIZE': api/macros/nlohmann_define_type_intrusive.md
           - 'NLOHMANN_DEFINE_TYPE_NON_INTRUSIVE, NLOHMANN_DEFINE_TYPE_NON_INTRUSIVE_WITH_DEFAULT, NLOHMANN_DEFINE_TYPE_NON_INTRUSIVE_ONLY_SERIALIZE': api/macros/nlohmann_define_type_non_intrusive.md

include/nlohmann/detail/conversions/from_json.hpp

@@ -19,7 +19,6 @@
 #include <unordered_map> // unordered_map
 #include <utility> // pair, declval
 #include <valarray> // valarray
-#include <vector> // vector
 
 #include <nlohmann/detail/exceptions.hpp>
 #include <nlohmann/detail/macro_scope.hpp>
@@ -333,7 +332,6 @@ template < typename BasicJsonType, typename ConstructibleArrayType,
                !is_constructible_object_type<BasicJsonType, ConstructibleArrayType>::value&&
                !is_constructible_string_type<BasicJsonType, ConstructibleArrayType>::value&&
                !std::is_same<ConstructibleArrayType, typename BasicJsonType::binary_t>::value&&
-               !is_compatible_binary_type<BasicJsonType, ConstructibleArrayType>::value&&
                !is_basic_json<ConstructibleArrayType>::value,
                int > = 0 >
 auto from_json(const BasicJsonType& j, ConstructibleArrayType& arr)
@@ -379,25 +377,6 @@ inline void from_json(const BasicJsonType& j, typename BasicJsonType::binary_t&
     bin = *j.template get_ptr<const typename BasicJsonType::binary_t*>();
 }
 
-template < typename BasicJsonType, typename CompatibleArrayType,
-           enable_if_t < is_compatible_binary_type<BasicJsonType, CompatibleArrayType>::value,
-                         int > = 0 >
-inline void from_json(const BasicJsonType& j, CompatibleArrayType& bin)
-{
-    if (j.is_binary())
-    {
-        bin = static_cast<CompatibleArrayType>(*j.template get_ptr<const typename BasicJsonType::binary_t*>());
-    }
-    else if (j.is_array())
-    {
-        from_json_array_impl(j, bin, priority_tag<3> {});
-    }
-    else
-    {
-        JSON_THROW(type_error::create(302, concat("type must be binary or array, but is ", j.type_name()), &j));
-    }
-}
-
 template<typename BasicJsonType, typename ConstructibleObjectType,
          enable_if_t<is_constructible_object_type<BasicJsonType, ConstructibleObjectType>::value, int> = 0>
 inline void from_json(const BasicJsonType& j, ConstructibleObjectType& obj)

include/nlohmann/detail/conversions/to_json.hpp

@@ -177,11 +177,8 @@ struct external_constructor<value_t::array>
     }
 
     template < typename BasicJsonType, typename CompatibleArrayType,
-               enable_if_t < !std::is_same<CompatibleArrayType, typename BasicJsonType::array_t>::value
-#if JSON_HAS_RANGES && !defined(__MINGW32__)
-                             && !is_compatible_range_view<CompatibleArrayType>::value
-#endif
-                             , int > = 0 >
+               enable_if_t < !std::is_same<CompatibleArrayType, typename BasicJsonType::array_t>::value,
+                             int > = 0 >
     static void construct(BasicJsonType& j, const CompatibleArrayType& arr)
     {
         using std::begin;
@@ -221,25 +218,6 @@ struct external_constructor<value_t::array>
         j.set_parents();
         j.assert_invariant();
     }
-
-    // std::ranges does not work properly on MinGW due to incomplete C++20 support
-    // see https://github.com/nlohmann/json/issues/4916
-#if JSON_HAS_RANGES && !defined(__MINGW32__)
-    template<typename BasicJsonType, typename CompatibleArrayType,
-             enable_if_t<is_compatible_range_view<std::remove_cvref_t<CompatibleArrayType>>::value, int> = 0>
-    static void construct(BasicJsonType& j, CompatibleArrayType && arr)
-    {
-        j.m_data.m_value.destroy(j.m_data.m_type);
-        j.m_data.m_type = value_t::array;
-        j.m_data.m_value = value_t::array;
-        for (auto&& x : std::forward<CompatibleArrayType>(arr))
-        {
-            j.m_data.m_value.array->push_back(x);
-            j.set_parent(j.m_data.m_value.array->back());
-        }
-        j.assert_invariant();
-    }
-#endif
 };
 
 template<>
@@ -377,44 +355,19 @@ template < typename BasicJsonType, typename CompatibleArrayType,
                          !is_compatible_object_type<BasicJsonType, CompatibleArrayType>::value&&
                          !is_compatible_string_type<BasicJsonType, CompatibleArrayType>::value&&
                          !std::is_same<typename BasicJsonType::binary_t, CompatibleArrayType>::value&&
-                         !is_compatible_binary_type<BasicJsonType, CompatibleArrayType>::value&&
-                         !is_basic_json<CompatibleArrayType>::value
-#if JSON_HAS_RANGES && !defined(__MINGW32__)
-    && !is_compatible_range_view<CompatibleArrayType>::value
-#endif
-                         ,
+                         !is_basic_json<CompatibleArrayType>::value,
                          int > = 0 >
 inline void to_json(BasicJsonType& j, const CompatibleArrayType& arr)
 {
     external_constructor<value_t::array>::construct(j, arr);
 }
 
-#if JSON_HAS_RANGES && !defined(__MINGW32__)
-template < typename BasicJsonType, typename T,
-           enable_if_t < is_compatible_range_view<std::remove_cvref_t<T>>::value
-                         && !is_compatible_string_type<BasicJsonType, std::remove_cvref_t<T>>::value
-                         && !is_compatible_object_type<BasicJsonType, std::remove_cvref_t<T>>::value
-                         && !is_basic_json<std::remove_cvref_t<T>>::value, int > = 0 >
-inline void to_json(BasicJsonType& j, T && arr)
-{
-    external_constructor<value_t::array>::construct(j, std::forward<T>(arr));
-}
-#endif
-
 template<typename BasicJsonType>
 inline void to_json(BasicJsonType& j, const typename BasicJsonType::binary_t& bin)
 {
     external_constructor<value_t::binary>::construct(j, bin);
 }
 
-template < typename BasicJsonType, typename CompatibleArrayType,
-           enable_if_t < is_compatible_binary_type<BasicJsonType, CompatibleArrayType>::value,
-                         int > = 0 >
-inline void to_json(BasicJsonType& j, const CompatibleArrayType& bin)
-{
-    external_constructor<value_t::binary>::construct(j, typename BasicJsonType::binary_t(bin));
-}
-
 template<typename BasicJsonType, typename T,
          enable_if_t<std::is_convertible<T, BasicJsonType>::value, int> = 0>
 inline void to_json(BasicJsonType& j, const std::valarray<T>& arr)

include/nlohmann/detail/input/input_adapters.hpp

@@ -231,33 +231,6 @@ class iterator_input_adapter
         std::is_same<IteratorType, SentinelType>::value && std::is_pointer<IteratorType>::value;
 #endif
 
-  public:
-    // Whether the remaining input is a single contiguous block of 1-byte
-    // elements that the lexer can inspect directly (used for the SWAR string
-    // fast path). Restricted to same-type iterator/sentinel pairs so that plain
-    // std::distance/std::advance are well-defined in all standards.
-    static constexpr bool supports_bulk_scan =
-        iterator_is_contiguous && std::is_same<IteratorType, SentinelType>::value && sizeof(char_type) == 1;
-
-    // Pointer to the next unread element; only valid when bulk_remaining() > 0.
-    const char_type* bulk_data() const
-    {
-        return &*current;
-    }
-
-    // Number of unread elements available as one contiguous block.
-    std::size_t bulk_remaining() const
-    {
-        return static_cast<std::size_t>(std::distance(current, end));
-    }
-
-    // Consume @a n elements previously inspected via bulk_data().
-    void bulk_skip(std::size_t n)
-    {
-        std::advance(current, static_cast<typename std::iterator_traits<IteratorType>::difference_type>(n));
-    }
-
-  private:
     // contiguous fast path: bulk copy the remaining range with std::memcpy
     template<class T>
     std::size_t get_elements_impl(T* dest, std::size_t count, std::true_type /*contiguous*/)
@@ -422,30 +395,17 @@ struct wide_string_input_helper<BaseInputAdapter, 2>
             }
             else
             {
-                // A supplementary code point is a high surrogate (0xD800..0xDBFF)
-                // followed by a low surrogate (0xDC00..0xDFFF). A lone low
-                // surrogate, a high surrogate at the end of the input, or a high
-                // surrogate followed by any other unit is malformed UTF-16. In
-                // that case the offending unit is passed through unchanged so the
-                // UTF-8 decoder rejects it, matching how \uXXXX surrogate escapes
-                // are handled in the lexer.
-                bool valid_pair = false;
-                if (wc <= 0xDBFF && JSON_HEDLEY_UNLIKELY(!input.empty()))
+                if (JSON_HEDLEY_UNLIKELY(!input.empty()))
                 {
                     const auto wc2 = static_cast<unsigned int>(input.get_character());
-                    if (0xDC00 <= wc2 && wc2 <= 0xDFFF)
-                    {
-                        const auto charcode = 0x10000u + (((static_cast<unsigned int>(wc) & 0x3FFu) << 10u) | (wc2 & 0x3FFu));
-                        utf8_bytes[0] = static_cast<std::char_traits<char>::int_type>(0xF0u | (charcode >> 18u));
-                        utf8_bytes[1] = static_cast<std::char_traits<char>::int_type>(0x80u | ((charcode >> 12u) & 0x3Fu));
-                        utf8_bytes[2] = static_cast<std::char_traits<char>::int_type>(0x80u | ((charcode >> 6u) & 0x3Fu));
-                        utf8_bytes[3] = static_cast<std::char_traits<char>::int_type>(0x80u | (charcode & 0x3Fu));
-                        utf8_bytes_filled = 4;
-                        valid_pair = true;
-                    }
+                    const auto charcode = 0x10000u + (((static_cast<unsigned int>(wc) & 0x3FFu) << 10u) | (wc2 & 0x3FFu));
+                    utf8_bytes[0] = static_cast<std::char_traits<char>::int_type>(0xF0u | (charcode >> 18u));
+                    utf8_bytes[1] = static_cast<std::char_traits<char>::int_type>(0x80u | ((charcode >> 12u) & 0x3Fu));
+                    utf8_bytes[2] = static_cast<std::char_traits<char>::int_type>(0x80u | ((charcode >> 6u) & 0x3Fu));
+                    utf8_bytes[3] = static_cast<std::char_traits<char>::int_type>(0x80u | (charcode & 0x3Fu));
+                    utf8_bytes_filled = 4;
                 }
-
-                if (!valid_pair)
+                else
                 {
                     utf8_bytes[0] = static_cast<std::char_traits<char>::int_type>(wc);
                     utf8_bytes_filled = 1;
@@ -593,24 +553,6 @@ typename iterator_input_adapter_factory<IteratorType, SentinelType>::adapter_typ
     return factory_type::create(first, last);
 }
 
-// Detect a container that stores its elements contiguously as single bytes
-// (std::string, std::vector<char/unsigned char>, std::array<char, N>,
-// std::string_view, ...). Such inputs are wrapped in a pointer-based adapter so
-// they benefit from the contiguous fast paths (bulk string scanning, memcpy for
-// binary formats) in every C++ standard - not only in C++20, where the standard
-// library iterators model std::contiguous_iterator and are detected directly.
-template<typename ContainerType, typename = void>
-struct is_contiguous_byte_container : std::false_type {};
-
-template<typename ContainerType>
-struct is_contiguous_byte_container < ContainerType, void_t <
-decltype(std::declval<const ContainerType&>().data()),
-decltype(std::declval<const ContainerType&>().size()) >>
-            : std::integral_constant < bool,
-        std::is_pointer<decltype(std::declval<const ContainerType&>().data())>::value&&
-        std::is_integral<typename std::remove_pointer<decltype(std::declval<const ContainerType&>().data())>::type>::value&&
-        sizeof(typename std::remove_pointer<decltype(std::declval<const ContainerType&>().data())>::type) == 1 > {};
-
 // Convenience shorthand from container to iterator
 // Enables ADL on begin(container) and end(container)
 // Encloses the using declarations in namespace for not to leak them to outside scope
@@ -638,32 +580,12 @@ struct container_input_adapter_factory< ContainerType,
 
 }  // namespace container_input_adapter_factory_impl
 
-// General container path (iterator-based). Contiguous single-byte containers
-// are excluded here and routed through the pointer-based overload below.
-template < typename ContainerType,
-           enable_if_t < !is_contiguous_byte_container<ContainerType>::value, int > = 0 >
-typename container_input_adapter_factory_impl::container_input_adapter_factory<ContainerType>::adapter_type input_adapter(ContainerType && container)
+template<typename ContainerType>
+typename container_input_adapter_factory_impl::container_input_adapter_factory<ContainerType>::adapter_type input_adapter(ContainerType&& container)
 {
     return container_input_adapter_factory_impl::container_input_adapter_factory<ContainerType>::create(std::forward<ContainerType>(container));
 }
 
-// Contiguous single-byte containers (std::string, std::vector<char>, ...) are
-// wrapped in a pointer-based adapter so the contiguous fast paths apply in every
-// standard. The pointer keeps the container's own element type (const char* for
-// std::string, const std::uint8_t* for std::vector<std::uint8_t>, ...), so the
-// resulting char_type - and therefore the parsing behavior - is byte-for-byte
-// identical to the iterator-based path; only the raw pointer additionally
-// enables the bulk fast paths. The container outlives the adapter for the whole
-// parse (temporaries live until the end of the full expression), exactly as the
-// iterators it replaces did.
-template < typename ContainerType,
-           enable_if_t < is_contiguous_byte_container<ContainerType>::value, int > = 0 >
-auto input_adapter(const ContainerType& container)
--> decltype(input_adapter(container.data(), container.data() + container.size()))
-{
-    return input_adapter(container.data(), container.data() + container.size());
-}
-
 // specialization for std::string
 using string_input_adapter_type = decltype(input_adapter(std::declval<std::string>()));
 

include/nlohmann/detail/input/lexer.hpp

@@ -19,9 +19,7 @@
 #include <vector> // vector
 
 #include <nlohmann/detail/input/input_adapters.hpp>
-#include <nlohmann/detail/input/number_parse.hpp>
 #include <nlohmann/detail/input/position_t.hpp>
-#include <nlohmann/detail/input/string_scan.hpp>
 #include <nlohmann/detail/macro_scope.hpp>
 #include <nlohmann/detail/meta/type_traits.hpp>
 
@@ -127,25 +125,6 @@ constexpr bool input_adapter_supports_seek(std::false_type /*detected*/)
     return false;
 }
 
-// Detect whether an input adapter exposes a contiguous byte block that the
-// lexer can scan directly (see iterator_input_adapter::supports_bulk_scan).
-// Adapters without the flag - file, stream, wide-string, user-defined - fall
-// back to the character-at-a-time string scanner.
-template<typename InputAdapterType>
-using detect_supports_bulk_scan = decltype(InputAdapterType::supports_bulk_scan);
-
-template<typename InputAdapterType>
-constexpr bool input_adapter_supports_bulk_scan(std::true_type /*detected*/)
-{
-    return InputAdapterType::supports_bulk_scan;
-}
-
-template<typename InputAdapterType>
-constexpr bool input_adapter_supports_bulk_scan(std::false_type /*detected*/)
-{
-    return false;
-}
-
 /*!
 @brief lexical analysis
 
@@ -167,14 +146,6 @@ class lexer : public lexer_base<BasicJsonType>
     static constexpr bool lazy_token_string =
         input_adapter_supports_seek<InputAdapterType>(is_detected<detect_supports_seek, InputAdapterType> {});
 
-    /// whether string scanning may bulk-consume runs of ordinary characters
-    /// directly from a contiguous input buffer (SWAR fast path). This requires
-    /// the token to be reconstructible lazily (lazy_token_string), so bypassing
-    /// the per-character capture in get() cannot lose error diagnostics.
-    static constexpr bool bulk_scan =
-        lazy_token_string
-        && input_adapter_supports_bulk_scan<InputAdapterType>(is_detected<detect_supports_bulk_scan, InputAdapterType> {});
-
   public:
     using token_type = typename lexer_base<BasicJsonType>::token_type;
 
@@ -294,40 +265,6 @@ class lexer : public lexer_base<BasicJsonType>
         return true;
     }
 
-    /// contiguous input: bulk-append the run of ordinary characters and complete
-    /// well-formed UTF-8 sequences starting at the current read position, leaving
-    /// the first byte that needs individual handling (the closing quote, an
-    /// escape, a control character, or an ill-formed UTF-8 byte) for get()
-    void scan_string_bulk(std::true_type /*bulk*/)
-    {
-        // a pending unget must be consumed through the normal path first
-        if (next_unget)
-        {
-            return;
-        }
-        const std::size_t remaining = ia.bulk_remaining();
-        if (remaining == 0)
-        {
-            return;
-        }
-        const auto* const data = reinterpret_cast<const unsigned char*>(ia.bulk_data());
-
-        const std::size_t pos = string_bulk_run(data, remaining);
-        if (pos == 0)
-        {
-            return;
-        }
-        token_buffer.append(reinterpret_cast<const typename string_t::value_type*>(data), pos);
-        ia.bulk_skip(pos);
-        // the run contains no newline (all bytes < 0x20 are treated as special),
-        // so only the flat character counters advance
-        position.chars_read_total += pos;
-        position.chars_read_current_line += pos;
-    }
-
-    /// streaming input: no bulk fast path
-    void scan_string_bulk(std::false_type /*bulk*/) const noexcept {}
-
     /*!
     @brief scan a string literal
 
@@ -353,10 +290,6 @@ class lexer : public lexer_base<BasicJsonType>
 
         while (true)
         {
-            // bulk-consume ordinary characters from contiguous input, then
-            // handle the next special byte through the switch below
-            scan_string_bulk(std::integral_constant<bool, bulk_scan> {});
-
             // get the next character
             switch (get())
             {
@@ -1346,56 +1279,45 @@ scan_number_done:
         // we are done scanning a number)
         unget();
 
-        return convert_number(number_type);
-    }
+        char* endptr = nullptr; // NOLINT(misc-const-correctness,cppcoreguidelines-pro-type-vararg,hicpp-vararg)
+        errno = 0;
 
-    /*!
-    @brief convert the number text in token_buffer to its value and token type
-
-    The digit sequence in token_buffer has already been validated (by the
-    scan_number() state machine or by the contiguous fast path) and holds the
-    locale decimal point in place of '.'. Integers are parsed first and fall
-    back to floating point on overflow. This is shared so both scanners produce
-    identical results.
-    */
-    token_type convert_number(token_type number_type)
-    {
-        const char* const num_begin = token_buffer.data();
-        const char* const num_end = num_begin + token_buffer.size();
-
-        // try to parse integers first and fall back to floats; the digit
-        // sequence has already been validated, so a dedicated parser can avoid
-        // the locale/errno overhead of strtoull
+        // try to parse integers first and fall back to floats
         if (number_type == token_type::value_unsigned)
         {
-            if (parse_integer_unsigned(num_begin, num_end, value_unsigned))
+            const auto x = std::strtoull(token_buffer.data(), &endptr, 10);
+
+            // we checked the number format before
+            JSON_ASSERT(endptr == token_buffer.data() + token_buffer.size());
+
+            if (errno != ERANGE)
             {
-                return token_type::value_unsigned;
+                value_unsigned = static_cast<number_unsigned_t>(x);
+                if (value_unsigned == x)
+                {
+                    return token_type::value_unsigned;
+                }
             }
         }
         else if (number_type == token_type::value_integer)
         {
-            if (parse_integer_signed(num_begin, num_end, value_integer))
+            const auto x = std::strtoll(token_buffer.data(), &endptr, 10);
+
+            // we checked the number format before
+            JSON_ASSERT(endptr == token_buffer.data() + token_buffer.size());
+
+            if (errno != ERANGE)
             {
-                return token_type::value_integer;
+                value_integer = static_cast<number_integer_t>(x);
+                if (value_integer == x)
+                {
+                    return token_type::value_integer;
+                }
             }
         }
 
         // this code is reached if we parse a floating-point number or if an
-        // integer conversion above overflowed. Prefer std::from_chars
-        // (Eisel-Lemire, locale-independent, correctly rounded) when available;
-        // otherwise the exact Clinger fast path (double only); otherwise the
-        // locale-aware strtof/strtod.
-        if (parse_float_from_chars(num_begin, num_end, value_float))
-        {
-            return token_type::value_float;
-        }
-        if (parse_float_fast(num_begin, num_end, decimal_point_char, value_float))
-        {
-            return token_type::value_float;
-        }
-
-        char* endptr = nullptr; // NOLINT(misc-const-correctness,cppcoreguidelines-pro-type-vararg,hicpp-vararg)
+        // integer conversion above failed
         strtof(value_float, token_buffer.data(), &endptr);
 
         // we checked the number format before
@@ -1404,130 +1326,6 @@ scan_number_done:
         return token_type::value_float;
     }
 
-    /*!
-    @brief contiguous fast path for scanning a number
-
-    Parses the whole number token straight from the input buffer, avoiding the
-    per-character get()/add() of scan_number(). On success it fills token_buffer
-    (with the locale decimal point substituted, as scan_number() does) and
-    returns the token type. On anything it does not fully recognize as a
-    well-formed number it makes no state change and returns
-    token_type::uninitialized, so the caller falls back to scan_number(), which
-    then produces the exact diagnostic. @a current is the first digit or the
-    leading minus (already read); the remaining bytes are taken from the adapter.
-    */
-    token_type scan_number_bulk_contiguous()
-    {
-        // a pending unget offsets the buffer position from current; fall back
-        if (next_unget)
-        {
-            return token_type::uninitialized;
-        }
-        const std::size_t rem = ia.bulk_remaining();
-        if (rem == 0)
-        {
-            // the first digit is the last input byte; let scan_number() finish
-            return token_type::uninitialized;
-        }
-        // the byte before the next unread one is current (contiguous input)
-        const char* const data = reinterpret_cast<const char*>(ia.bulk_data()) - 1;
-        const std::size_t avail = rem + 1;
-
-        // validate + classify the number extent (mirrors scan_number()'s grammar)
-        std::size_t i = 0;
-        std::size_t dot_index = std::string::npos;
-        token_type number_type = token_type::value_unsigned;
-        if (data[0] == '-')
-        {
-            number_type = token_type::value_integer;
-            i = 1;
-            if (i >= avail)
-            {
-                return token_type::uninitialized;
-            }
-        }
-        if (data[i] == '0')
-        {
-            ++i;
-        }
-        else if (data[i] >= '1' && data[i] <= '9')
-        {
-            ++i;
-            while (i < avail && data[i] >= '0' && data[i] <= '9')
-            {
-                ++i;
-            }
-        }
-        else
-        {
-            return token_type::uninitialized;
-        }
-        if (i < avail && data[i] == '.')
-        {
-            number_type = token_type::value_float;
-            dot_index = i;
-            ++i;
-            if (i >= avail || !(data[i] >= '0' && data[i] <= '9'))
-            {
-                return token_type::uninitialized;
-            }
-            while (i < avail && data[i] >= '0' && data[i] <= '9')
-            {
-                ++i;
-            }
-        }
-        if (i < avail && (data[i] == 'e' || data[i] == 'E'))
-        {
-            number_type = token_type::value_float;
-            ++i;
-            if (i < avail && (data[i] == '+' || data[i] == '-'))
-            {
-                ++i;
-            }
-            if (i >= avail || !(data[i] >= '0' && data[i] <= '9'))
-            {
-                return token_type::uninitialized;
-            }
-            while (i < avail && data[i] >= '0' && data[i] <= '9')
-            {
-                ++i;
-            }
-        }
-        const std::size_t len = i;
-
-        // materialize the token exactly as scan_number() would, substituting the
-        // locale decimal point so convert_number()'s strtof fallback stays valid.
-        // reset() already cleared token_buffer, so append() fills it (assign() is
-        // avoided because custom string_t types need not provide it)
-        reset();
-        token_buffer.append(reinterpret_cast<const typename string_t::value_type*>(data), len);
-        if (dot_index != std::string::npos)
-        {
-            token_buffer[dot_index] = static_cast<typename string_t::value_type>(decimal_point_char);
-            decimal_point_position = dot_index;
-        }
-
-        // consume the remaining bytes of the number (current was already read)
-        ia.bulk_skip(len - 1);
-        position.chars_read_total += (len - 1);
-        position.chars_read_current_line += (len - 1);
-
-        return convert_number(number_type);
-    }
-
-    /// contiguous input: try the number fast path, else the byte-path scanner
-    token_type scan_number_dispatch(std::true_type /*bulk*/)
-    {
-        const token_type t = scan_number_bulk_contiguous();
-        return (t != token_type::uninitialized) ? t : scan_number();
-    }
-
-    /// streaming input: always use the byte-path scanner
-    token_type scan_number_dispatch(std::false_type /*bulk*/)
-    {
-        return scan_number();
-    }
-
     /*!
     @param[in] literal_text  the literal text to expect
     @param[in] length        the length of the passed literal text
@@ -1882,7 +1680,7 @@ scan_number_done:
             case '7':
             case '8':
             case '9':
-                return scan_number_dispatch(std::integral_constant<bool, bulk_scan> {});
+                return scan_number();
 
             // end of input (the null byte is needed when parsing from
             // string literals)

include/nlohmann/detail/input/number_parse.hpp

@@ -1,302 +0,0 @@
-//     __ _____ _____ _____
-//  __|  |   __|     |   | |  JSON for Modern C++
-// |  |  |__   |  |  | | | |  version 3.12.0
-// |_____|_____|_____|_|___|  https://github.com/nlohmann/json
-//
-// SPDX-FileCopyrightText: 2013-2026 Niels Lohmann <https://nlohmann.me>
-// SPDX-License-Identifier: MIT
-
-#pragma once
-
-#include <array> // array
-#include <cfloat> // FLT_EVAL_METHOD
-#include <cstddef> // size_t
-#include <cstdint> // int64_t, uint64_t
-#include <limits> // numeric_limits
-
-#include <nlohmann/detail/macro_scope.hpp>
-
-// std::from_chars lives in <charconv>, but being in C++17 mode does not
-// guarantee the header exists: GCC 7 sets __cplusplus to C++17 yet ships no
-// <charconv> (added in GCC 8; floating-point support in GCC 11). Guard the
-// include with __has_include so such toolchains fall back to the scalar path.
-#if defined(JSON_HAS_CPP_17) && defined(__has_include)
-    #if __has_include(<charconv>)
-        #include <charconv> // from_chars (only used when __cpp_lib_to_chars is defined)
-        #include <system_error> // errc
-    #endif
-#endif
-
-// This file contains the value-conversion helpers used by the lexer to turn an
-// already-validated number token into a value, without the locale/errno
-// overhead of std::strtoull/std::strtod. They are free functions so the lexer
-// stays focused on scanning; see lexer::convert_number().
-
-NLOHMANN_JSON_NAMESPACE_BEGIN
-namespace detail
-{
-
-/*!
-@brief fast integer parser for an already-validated unsigned integer
-
-The number scanner has already checked that [first, last) is a valid JSON
-integer, so this only needs to accumulate the digits and detect overflow. This
-avoids the locale/errno machinery of std::strtoull, which dominates
-integer-heavy inputs.
-
-@param[in]  first   pointer to the first character (a digit)
-@param[in]  last    pointer past the last character
-@param[out] value   the parsed value on success
-@return true if the value fit into @a NumberUnsignedType; false on overflow, in
-        which case the caller falls back to floating-point parsing (matching the
-        previous std::strtoull behavior)
-*/
-template<typename NumberUnsignedType>
-bool parse_integer_unsigned(const char* first, const char* last, NumberUnsignedType& value) noexcept
-{
-    // accumulate in the widest unsigned type used by the previous strtoull
-    // path so the overflow behavior is unchanged for custom number types
-    std::uint64_t x = 0;
-    constexpr std::uint64_t cutoff = (std::numeric_limits<std::uint64_t>::max)() / 10u;
-    constexpr std::uint64_t cutlim = (std::numeric_limits<std::uint64_t>::max)() % 10u;
-    for (const char* p = first; p != last; ++p)
-    {
-        const auto digit = static_cast<std::uint64_t>(static_cast<unsigned char>(*p) - static_cast<unsigned char>('0'));
-        if (JSON_HEDLEY_UNLIKELY(x > cutoff || (x == cutoff && digit > cutlim)))
-        {
-            return false;
-        }
-        x = (x * 10u) + digit;
-    }
-    value = static_cast<NumberUnsignedType>(x);
-    // reject values that do not round-trip into a narrower NumberUnsignedType
-    return static_cast<std::uint64_t>(value) == x;
-}
-
-/*!
-@brief fast integer parser for an already-validated negative integer
-
-@param[in]  first   pointer to the leading '-'
-@param[in]  last    pointer past the last character
-@param[out] value   the parsed (negative) value on success
-@return true on success; false on overflow (caller falls back to float)
-*/
-template<typename NumberIntegerType>
-bool parse_integer_signed(const char* first, const char* last, NumberIntegerType& value) noexcept
-{
-    // the state machine only reaches the signed path via a leading '-'
-    JSON_ASSERT(first != last && *first == '-');
-    std::uint64_t magnitude = 0;
-    // |INT64_MIN| == INT64_MAX + 1; this is the largest admissible magnitude
-    constexpr std::uint64_t limit = static_cast<std::uint64_t>((std::numeric_limits<std::int64_t>::max)()) + 1u;
-    for (const char* p = first + 1; p != last; ++p)
-    {
-        const auto digit = static_cast<std::uint64_t>(static_cast<unsigned char>(*p) - static_cast<unsigned char>('0'));
-        if (JSON_HEDLEY_UNLIKELY(magnitude > (limit - digit) / 10u))
-        {
-            return false;
-        }
-        magnitude = (magnitude * 10u) + digit;
-    }
-    const std::int64_t x = (magnitude == limit)
-                           ? (std::numeric_limits<std::int64_t>::min)()
-                           : -static_cast<std::int64_t>(magnitude);
-    value = static_cast<NumberIntegerType>(x);
-    // reject values that do not round-trip into a narrower NumberIntegerType
-    return static_cast<std::int64_t>(value) == x;
-}
-
-/*!
-@brief exact fast path for parsing a `double` (Clinger's algorithm)
-
-For the common case - at most 19 significant digits, a decimal exponent in
-[-22, 22], and a significand below 2^53 - the value equals significand *
-10^exp computed in IEEE-754 double arithmetic, which is exact under
-round-to-nearest because both operands are exactly representable. This is the
-same fast path used by fast_float/simdjson; the general cases are left to
-std::strtod. The parser only activates for number_float_t == double; float and
-long double keep the std::strtof/std::strtold paths (see the templated overload
-below).
-
-@param[in]  first          pointer to the first character of the number
-@param[in]  last           pointer past the last character
-@param[in]  decimal_point  the (locale-dependent) decimal point character
-@param[out] out            the parsed value on success
-@return true if the value was parsed exactly; false to fall back to strtod
-*/
-template<typename DecimalPointType>
-bool parse_float_fast(const char* first, const char* last, DecimalPointType decimal_point, double& out) noexcept
-{
-#if defined(FLT_EVAL_METHOD) && FLT_EVAL_METHOD != 0
-    // Clinger's fast path is only exact when double operations are evaluated in
-    // true double precision. On platforms that keep intermediates in extended
-    // precision (e.g. the x87 FPU on 32-bit x86, where FLT_EVAL_METHOD == 2) the
-    // single significand * 10^scale step is double-rounded and can be 1 ULP off,
-    // so decline and let the caller fall back to the correctly-rounded
-    // std::from_chars / std::strtod path.
-    static_cast<void>(first);
-    static_cast<void>(last);
-    static_cast<void>(decimal_point);
-    static_cast<void>(out);
-    return false;
-#else
-    static const std::array<double, 23> powers_of_ten =
-    {
-        {
-            1e0, 1e1, 1e2, 1e3, 1e4, 1e5, 1e6, 1e7, 1e8, 1e9, 1e10, 1e11,
-            1e12, 1e13, 1e14, 1e15, 1e16, 1e17, 1e18, 1e19, 1e20, 1e21, 1e22
-        }
-    };
-
-    const char* p = first;
-    bool negative = false;
-    if (p != last && (*p == '-' || *p == '+'))
-    {
-        negative = (*p == '-');
-        ++p;
-    }
-
-    std::uint64_t significand = 0;
-    int num_digits = 0;
-    int fractional_digits = 0;
-    bool seen_dot = false;
-    bool any_digit = false;
-    for (; p != last; ++p)
-    {
-        const char c = *p;
-        if (c >= '0' && c <= '9')
-        {
-            any_digit = true;
-            if (JSON_HEDLEY_UNLIKELY(num_digits >= 19))
-            {
-                return false; // significand may not fit into uint64_t
-            }
-            significand = (significand * 10u) + static_cast<std::uint64_t>(c - '0');
-            ++num_digits;
-            fractional_digits += static_cast<int>(seen_dot);
-        }
-        else if (static_cast<DecimalPointType>(c) == decimal_point)
-        {
-            if (JSON_HEDLEY_UNLIKELY(seen_dot))
-            {
-                return false;
-            }
-            seen_dot = true;
-        }
-        else if (c == 'e' || c == 'E')
-        {
-            ++p;
-            break;
-        }
-        else
-        {
-            return false;
-        }
-    }
-    if (JSON_HEDLEY_UNLIKELY(!any_digit))
-    {
-        return false;
-    }
-
-    int exponent = 0;
-    if (p != last) // an exponent part remains
-    {
-        bool exp_negative = false;
-        if (p != last && (*p == '-' || *p == '+'))
-        {
-            exp_negative = (*p == '-');
-            ++p;
-        }
-        bool any_exp_digit = false;
-        for (; p != last; ++p)
-        {
-            if (JSON_HEDLEY_UNLIKELY(*p < '0' || *p > '9'))
-            {
-                return false;
-            }
-            exponent = (exponent * 10) + (*p - '0');
-            any_exp_digit = true;
-            if (JSON_HEDLEY_UNLIKELY(exponent > 9999))
-            {
-                return false;
-            }
-        }
-        if (JSON_HEDLEY_UNLIKELY(!any_exp_digit))
-        {
-            return false;
-        }
-        if (exp_negative)
-        {
-            exponent = -exponent;
-        }
-    }
-
-    const int scale = exponent - fractional_digits;
-    if (JSON_HEDLEY_UNLIKELY(significand >= (static_cast<std::uint64_t>(1) << 53)))
-    {
-        return false; // significand not exactly representable as double
-    }
-
-    auto result = static_cast<double>(significand);
-    if (scale >= 0)
-    {
-        if (JSON_HEDLEY_UNLIKELY(scale > 22))
-        {
-            return false;
-        }
-        result *= powers_of_ten[static_cast<std::size_t>(scale)];
-    }
-    else
-    {
-        if (JSON_HEDLEY_UNLIKELY(-scale > 22))
-        {
-            return false;
-        }
-        result /= powers_of_ten[static_cast<std::size_t>(-scale)];
-    }
-    out = negative ? -result : result;
-    return true;
-#endif
-}
-
-/// fast float path is only exact for `double`; decline for float/long double
-template<typename DecimalPointType, typename FloatType>
-bool parse_float_fast(const char* /*first*/, const char* /*last*/, DecimalPointType /*decimal_point*/, FloatType& /*out*/) noexcept
-{
-    return false;
-}
-
-/*!
-@brief parse a float with std::from_chars (Eisel-Lemire) when available
-
-std::from_chars is locale-independent, correctly rounded, and - via the
-Eisel-Lemire algorithm in modern standard libraries - much faster than strtod
-over the whole value range (not just the Clinger subset). It is used only when
-__cpp_lib_to_chars indicates full floating-point support and only when it
-consumes the entire token ([first, last)); a partial parse means the buffer
-uses a non-'.' locale decimal point, in which case the caller falls back to the
-locale-aware path. An under-/overflow (result_out_of_range) also declines, so
-the caller's strtod fallback supplies the well-defined ±inf/0 result the parser
-expects (side-stepping the P4168 divergence between implementations).
-
-@return true if the value was parsed exactly and fully; false to fall back
-*/
-template<typename FloatType>
-bool parse_float_from_chars(const char* first, const char* last, FloatType& out) noexcept
-{
-    // JSON_HAS_CPP_17 must gate the use as well as the <charconv> include above:
-    // some standard libraries (e.g. libstdc++ 15) define __cpp_lib_to_chars even
-    // in C++14 mode, where <charconv> is not included.
-#if defined(JSON_HAS_CPP_17) && defined(__cpp_lib_to_chars)
-    const auto result = std::from_chars(first, last, out);
-    return result.ec == std::errc() && result.ptr == last;
-#else
-    static_cast<void>(first);
-    static_cast<void>(last);
-    static_cast<void>(out);
-    return false;
-#endif
-}
-
-}  // namespace detail
-NLOHMANN_JSON_NAMESPACE_END

include/nlohmann/detail/input/string_scan.hpp

@@ -1,289 +0,0 @@
-//     __ _____ _____ _____
-//  __|  |   __|     |   | |  JSON for Modern C++
-// |  |  |__   |  |  | | | |  version 3.12.0
-// |_____|_____|_____|_|___|  https://github.com/nlohmann/json
-//
-// SPDX-FileCopyrightText: 2013-2026 Niels Lohmann <https://nlohmann.me>
-// SPDX-License-Identifier: MIT
-
-#pragma once
-
-#include <cstddef> // size_t
-#include <cstdint> // uint64_t
-#include <cstring> // memcpy
-
-#if defined(JSON_USE_SIMDUTF)
-    // Optional SIMD backend for bulk UTF-8 validation. This is an opt-in
-    // external dependency: nlohmann/json itself stays header-only and the C++11
-    // scalar validator below is always available; defining JSON_USE_SIMDUTF
-    // additionally requires the simdutf headers on the include path and linking
-    // the simdutf library. See string_bulk_run().
-    #include <simdutf.h>
-#endif
-
-#include <nlohmann/detail/macro_scope.hpp>
-
-// This file contains the byte-level string-scanning helpers used by the lexer's
-// contiguous fast path. They operate purely on raw bytes (no dependency on the
-// lexer's template parameters) so they are free functions, keeping the lexer
-// itself focused on the state machine; see lexer::scan_string_bulk().
-
-NLOHMANN_JSON_NAMESPACE_BEGIN
-namespace detail
-{
-
-// classify a single byte as needing individual string handling: the closing
-// quote, an escape, a control character, or a non-ASCII (UTF-8)
-// lead/continuation byte. Ordinary bytes (0x20..0x7F except '"' and '\\') are
-// copied verbatim, which the bulk scanner does 8 bytes at a time.
-inline bool is_string_special(unsigned char c) noexcept
-{
-    return c == '\"' || c == '\\' || c < 0x20u || c >= 0x80u;
-}
-
-// SWAR helper: return a word whose high bit is set in every byte of @a v that
-// is_string_special(); zero if the 8 bytes are all ordinary.
-inline std::uint64_t swar_string_special(std::uint64_t v) noexcept
-{
-    constexpr std::uint64_t ones = 0x0101010101010101ull;
-    constexpr std::uint64_t high = 0x8080808080808080ull;
-    const std::uint64_t q = v ^ 0x2222222222222222ull; // '"'  (0x22)
-    const std::uint64_t b = v ^ 0x5C5C5C5C5C5C5C5Cull; // '\\' (0x5C)
-    const std::uint64_t has_quote     = (q - ones) & ~q & high;
-    const std::uint64_t has_backslash = (b - ones) & ~b & high;
-    const std::uint64_t has_control   = (v - 0x2020202020202020ull) & ~v & high; // < 0x20
-    const std::uint64_t has_non_ascii = v & high;                                // >= 0x80
-    return has_quote | has_backslash | has_control | has_non_ascii;
-}
-
-// return the index of the first is_string_special() byte in [data, data+n), or
-// n if every byte is ordinary; scans 8 bytes at a time
-inline std::size_t find_string_special(const unsigned char* data, std::size_t n) noexcept
-{
-    std::size_t i = 0;
-    for (; i + 8 <= n; i += 8)
-    {
-        std::uint64_t word = 0;
-        std::memcpy(&word, data + i, sizeof(word));
-        if (swar_string_special(word) != 0)
-        {
-            // a special byte is in this word; locate it (endian-agnostic)
-            for (std::size_t j = 0; j < 8; ++j)
-            {
-                if (is_string_special(data[i + j]))
-                {
-                    return i + j;
-                }
-            }
-        }
-    }
-    for (; i < n; ++i)
-    {
-        if (is_string_special(data[i]))
-        {
-            return i;
-        }
-    }
-    return n;
-}
-
-// classify a byte as one the serializer must NOT copy verbatim when
-// ensure_ascii is requested: the closing quote, an escape, a control character
-// (< 0x20), DEL (0x7F), or any non-ASCII byte (>= 0x80). Everything else -
-// printable ASCII except '"' and '\\' - is emitted unchanged. Note this differs
-// from is_string_special() only in that 0x7F is also a stop (it is escaped as
-// \u007f under ensure_ascii).
-inline bool is_ascii_copyable(unsigned char c) noexcept
-{
-    return c >= 0x20u && c < 0x7Fu && c != '\"' && c != '\\';
-}
-
-// return the index of the first byte in [data, data+n) that is NOT
-// is_ascii_copyable(), or n if every byte can be copied verbatim; scans 8 bytes
-// at a time. Used by the serializer's ensure_ascii fast path.
-inline std::size_t find_ascii_copyable_run(const unsigned char* data, std::size_t n) noexcept
-{
-    constexpr std::uint64_t ones = 0x0101010101010101ull;
-    constexpr std::uint64_t high = 0x8080808080808080ull;
-    std::size_t i = 0;
-    for (; i + 8 <= n; i += 8)
-    {
-        std::uint64_t v = 0;
-        std::memcpy(&v, data + i, sizeof(v));
-        const std::uint64_t q = v ^ 0x2222222222222222ull; // '"'  (0x22)
-        const std::uint64_t b = v ^ 0x5C5C5C5C5C5C5C5Cull; // '\\' (0x5C)
-        const std::uint64_t d = v ^ 0x7F7F7F7F7F7F7F7Full; // DEL  (0x7F)
-        const std::uint64_t stop = ((q - ones) & ~q & high)   // == '"'
-                                   | ((b - ones) & ~b & high)  // == '\\'
-                                   | ((d - ones) & ~d & high)  // == 0x7F
-                                   | ((v - 0x2020202020202020ull) & ~v & high) // < 0x20
-                                   | (v & high);               // >= 0x80
-        if (stop != 0)
-        {
-            for (std::size_t j = 0; j < 8; ++j)
-            {
-                if (!is_ascii_copyable(data[i + j]))
-                {
-                    return i + j;
-                }
-            }
-        }
-    }
-    for (; i < n; ++i)
-    {
-        if (!is_ascii_copyable(data[i]))
-        {
-            return i;
-        }
-    }
-    return n;
-}
-
-// Validate one UTF-8 sequence at the front of [data, data+avail). Returns its
-// length (2..4) only when the bytes form a *well-formed* sequence using exactly
-// the same ranges as scan_string()'s per-byte switch, so the bulk path accepts
-// precisely what the byte path accepts. Returns 0 for anything that is invalid,
-// incomplete, or that the byte path must diagnose (the caller then defers to
-// that path, keeping error messages unchanged). Lead bytes < 0x80 are handled
-// by the caller and never passed here.
-inline std::size_t validate_one_utf8(const unsigned char* data, std::size_t avail) noexcept
-{
-    const unsigned char c0 = data[0];
-    if (c0 >= 0xC2 && c0 <= 0xDF)  // U+0080..U+07FF
-    {
-        if (avail >= 2 && data[1] >= 0x80 && data[1] <= 0xBF)
-        {
-            return 2;
-        }
-    }
-    else if (c0 == 0xE0)  // U+0800..U+0FFF
-    {
-        if (avail >= 3 && data[1] >= 0xA0 && data[1] <= 0xBF && data[2] >= 0x80 && data[2] <= 0xBF)
-        {
-            return 3;
-        }
-    }
-    else if ((c0 >= 0xE1 && c0 <= 0xEC) || c0 == 0xEE || c0 == 0xEF)  // U+1000..U+CFFF, U+E000..U+FFFF
-    {
-        if (avail >= 3 && data[1] >= 0x80 && data[1] <= 0xBF && data[2] >= 0x80 && data[2] <= 0xBF)
-        {
-            return 3;
-        }
-    }
-    else if (c0 == 0xED)  // U+D000..U+D7FF (excludes surrogates)
-    {
-        if (avail >= 3 && data[1] >= 0x80 && data[1] <= 0x9F && data[2] >= 0x80 && data[2] <= 0xBF)
-        {
-            return 3;
-        }
-    }
-    else if (c0 == 0xF0)  // U+10000..U+3FFFF
-    {
-        if (avail >= 4 && data[1] >= 0x90 && data[1] <= 0xBF && data[2] >= 0x80 && data[2] <= 0xBF && data[3] >= 0x80 && data[3] <= 0xBF)
-        {
-            return 4;
-        }
-    }
-    else if (c0 >= 0xF1 && c0 <= 0xF3)  // U+40000..U+FFFFF
-    {
-        if (avail >= 4 && data[1] >= 0x80 && data[1] <= 0xBF && data[2] >= 0x80 && data[2] <= 0xBF && data[3] >= 0x80 && data[3] <= 0xBF)
-        {
-            return 4;
-        }
-    }
-    else if (c0 == 0xF4)  // U+100000..U+10FFFF
-    {
-        if (avail >= 4 && data[1] >= 0x80 && data[1] <= 0x8F && data[2] >= 0x80 && data[2] <= 0xBF && data[3] >= 0x80 && data[3] <= 0xBF)
-        {
-            return 4;
-        }
-    }
-    return 0; // invalid, incomplete, or must be diagnosed by the byte path
-}
-
-// Scalar (C++11) computation of the bulk run length: the number of leading
-// bytes in [data, data+n) that are ordinary ASCII or complete well-formed UTF-8
-// sequences, stopping before the first byte that needs individual handling (the
-// closing quote, an escape, a control character, or an ill-formed/truncated
-// sequence). ASCII is skipped 8 bytes at a time.
-inline std::size_t scalar_string_bulk_run(const unsigned char* data, std::size_t n) noexcept
-{
-    std::size_t pos = 0;
-    while (pos < n)
-    {
-        pos += find_string_special(data + pos, n - pos);
-        if (pos >= n || data[pos] < 0x80u)
-        {
-            break; // end of buffer, or a quote/escape/control byte
-        }
-        const std::size_t seq = validate_one_utf8(data + pos, n - pos);
-        if (seq == 0)
-        {
-            break; // ill-formed or truncated: let the byte path diagnose it
-        }
-        pos += seq;
-    }
-    return pos;
-}
-
-#if defined(JSON_USE_SIMDUTF)
-// Index of the first quote/escape/control byte in [data, data+n) (non-ASCII
-// bytes are *not* stops here - the whole run is handed to simdutf), or n.
-inline std::size_t find_string_delimiter(const unsigned char* data, std::size_t n) noexcept
-{
-    constexpr std::uint64_t ones = 0x0101010101010101ull;
-    constexpr std::uint64_t high = 0x8080808080808080ull;
-    std::size_t i = 0;
-    for (; i + 8 <= n; i += 8)
-    {
-        std::uint64_t v = 0;
-        std::memcpy(&v, data + i, sizeof(v));
-        const std::uint64_t q = v ^ 0x2222222222222222ull;
-        const std::uint64_t b = v ^ 0x5C5C5C5C5C5C5C5Cull;
-        const std::uint64_t hit = ((q - ones) & ~q & high)
-                                  | ((b - ones) & ~b & high)
-                                  | ((v - 0x2020202020202020ull) & ~v & high);
-        if (hit != 0)
-        {
-            for (std::size_t j = 0; j < 8; ++j)
-            {
-                const unsigned char c = data[i + j];
-                if (c == '\"' || c == '\\' || c < 0x20u)
-                {
-                    return i + j;
-                }
-            }
-        }
-    }
-    for (; i < n; ++i)
-    {
-        const unsigned char c = data[i];
-        if (c == '\"' || c == '\\' || c < 0x20u)
-        {
-            return i;
-        }
-    }
-    return n;
-}
-#endif
-
-// Backend-dispatched bulk run length. With JSON_USE_SIMDUTF the run up to the
-// next delimiter is validated in one shot by simdutf; on the rare failure the
-// scalar helper recomputes the exact valid prefix so the byte path still
-// produces the precise diagnostic. Without it, the pure scalar path is used.
-inline std::size_t string_bulk_run(const unsigned char* data, std::size_t n) noexcept
-{
-#if defined(JSON_USE_SIMDUTF)
-    const std::size_t run = find_string_delimiter(data, n);
-    if (run != 0 && simdutf::validate_utf8(reinterpret_cast<const char*>(data), run))
-    {
-        return run;
-    }
-    return scalar_string_bulk_run(data, n);
-#else
-    return scalar_string_bulk_run(data, n);
-#endif
-}
-
-}  // namespace detail
-NLOHMANN_JSON_NAMESPACE_END

include/nlohmann/detail/meta/type_traits.hpp

@@ -13,15 +13,11 @@
 #include <tuple> // tuple
 #include <type_traits> // false_type, is_constructible, is_integral, is_same, true_type
 #include <utility> // declval
-#include <vector> // vector
 #if defined(__cpp_lib_byte) && __cpp_lib_byte >= 201603L
     #include <cstddef> // byte
 #endif
 #include <nlohmann/detail/iterators/iterator_traits.hpp>
 #include <nlohmann/detail/macro_scope.hpp>
-#ifdef JSON_HAS_CPP_17
-    #include <optional> // optional
-#endif
 #include <nlohmann/detail/meta/call_std/begin.hpp>
 #include <nlohmann/detail/meta/call_std/end.hpp>
 #include <nlohmann/detail/meta/cpp_future.hpp>
@@ -454,51 +450,6 @@ struct is_constructible_string_type
         value_type_t, laundered_type >>::value;
 };
 
-// Forward declarations: iteration_proxy.hpp includes this file, so we cannot
-// include it here.
-template<typename IteratorType> class iteration_proxy;
-template<typename IteratorType> class iteration_proxy_value;
-
-// Identifies nlohmann's internal iteration-proxy types. These must be excluded
-// before evaluating any std::ranges concept to avoid circular constraints.
-template<typename T> struct is_iteration_proxy_type : std::false_type {};
-template<typename T> struct is_iteration_proxy_type<iteration_proxy<T>>       : std::true_type {};
-template<typename T> struct is_iteration_proxy_type<iteration_proxy_value<T>> : std::true_type {};
-
-// In C++26, std::optional satisfies std::ranges::view; exclude it so the
-// range-view overload does not hijack the optional serializer.
-#ifdef JSON_HAS_CPP_17
-template<typename T> struct is_range_view_optional_type : std::false_type {};
-template<typename T> struct is_range_view_optional_type<std::optional<T>> : std::true_type {};
-#else
-template<typename T> struct is_range_view_optional_type : std::false_type {};
-#endif
-
-// std::ranges does not work properly on MinGW due to incomplete C++20 support
-// see https://github.com/nlohmann/json/issues/4916
-#if JSON_HAS_RANGES && !defined(__MINGW32__)
-
-// SafeToCheck guards against types that trigger circular constraints when
-// std::ranges::view<T> is evaluated on GCC 12 / libstdc++ 12:
-//   - iteration_proxy / iteration_proxy_value directly
-//   - views wrapping the above (e.g. owning_view<iteration_proxy<...>>)
-//   - views wrapping basic_json (e.g. ref_view<json>) — same circularity
-//     via json's constructors → is_compatible_array_type → here
-// nlohmann's plain range_value_t (iterator_traits-based) is safe to call
-// before any std::ranges concept is touched, so we use it for the checks.
-template < typename T, bool SafeToCheck =
-           !is_iteration_proxy_type<T>::value &&
-           !is_iteration_proxy_type<detected_t<range_value_t, T>>::value &&
-           !is_basic_json<detected_t<range_value_t, T>>::value &&
-           !is_range_view_optional_type<T>::value >
-struct is_compatible_range_view : std::false_type {};
-
-template<typename T>
-struct is_compatible_range_view<T, true>
-    : std::bool_constant<std::ranges::view<T>> {};
-
-#endif
-
 template<typename BasicJsonType, typename CompatibleArrayType, typename = void>
 struct is_compatible_array_type_impl : std::false_type {};
 
@@ -510,38 +461,13 @@ struct is_compatible_array_type_impl <
     is_iterator_traits<iterator_traits<detected_t<iterator_t, CompatibleArrayType>>>::value&&
 // special case for types like std::filesystem::path whose iterator's value_type are themselves
 // c.f. https://github.com/nlohmann/json/pull/3073
-    !std::is_same<CompatibleArrayType, detected_t<range_value_t, CompatibleArrayType>>::value
-// When range-view support is enabled, std::ranges::view types (e.g. std::string_view,
-// filter_view) can match BOTH this iterator-based specialization AND the view-based one
-// below, causing ambiguity. Exclude views here so the two specializations are mutually
-// exclusive: this one handles plain iterable containers, the other handles views.
-#if JSON_HAS_RANGES && !defined(__MINGW32__)
-&& !is_compatible_range_view<CompatibleArrayType>::value
-#endif
-            >>
+    !std::is_same<CompatibleArrayType, detected_t<range_value_t, CompatibleArrayType>>::value >>
 {
     static constexpr bool value =
         is_constructible<BasicJsonType,
         range_value_t<CompatibleArrayType>>::value;
 };
 
-#if JSON_HAS_RANGES && !defined(__MINGW32__)
-template<typename BasicJsonType, typename CompatibleArrayType>
-struct is_compatible_array_type_impl <
-    BasicJsonType, CompatibleArrayType,
-    enable_if_t < is_compatible_range_view<CompatibleArrayType>::value
-    && !std::is_same<detected_t<range_value_t, CompatibleArrayType>, char>::value
-    && !std::is_same<detected_t<range_value_t, CompatibleArrayType>, wchar_t>::value >>
-{
-    // CompatibleArrayType is a std::ranges::view here, so std::ranges::range_value_t
-    // is safe and correctly handles C++20 iterators that may lack classic iterator_traits.
-    static constexpr bool value =
-        is_constructible<BasicJsonType,
-        std::ranges::range_value_t<CompatibleArrayType>>::value;
-};
-#endif
-
-
 template<typename BasicJsonType, typename CompatibleArrayType>
 struct is_compatible_array_type
     : is_compatible_array_type_impl<BasicJsonType, CompatibleArrayType> {};
@@ -633,14 +559,6 @@ template<typename BasicJsonType, typename CompatibleType>
 struct is_compatible_type
     : is_compatible_type_impl<BasicJsonType, CompatibleType> {};
 
-template<typename BasicJsonType, typename CompatibleArrayType>
-struct is_compatible_binary_type
-{
-    static constexpr bool value =
-        std::is_same<typename BasicJsonType::binary_t::container_type, CompatibleArrayType>::value &&
-        !std::is_same<typename BasicJsonType::binary_t::container_type, std::vector<std::uint8_t>>::value;
-};
-
 template<typename BasicJsonType, typename CompatibleReferenceType>
 struct is_compatible_reference_type_impl
 {

include/nlohmann/detail/output/serializer.hpp

@@ -16,7 +16,6 @@
 #include <cstddef> // size_t, ptrdiff_t
 #include <cstdint> // uint8_t
 #include <cstdio> // snprintf
-#include <cstring> // memcpy
 #include <limits> // numeric_limits
 #include <string> // string, char_traits
 #include <iomanip> // setfill, setw
@@ -25,7 +24,6 @@
 
 #include <nlohmann/detail/conversions/to_chars.hpp>
 #include <nlohmann/detail/exceptions.hpp>
-#include <nlohmann/detail/input/string_scan.hpp>
 #include <nlohmann/detail/macro_scope.hpp>
 #include <nlohmann/detail/meta/cpp_future.hpp>
 #include <nlohmann/detail/output/binary_writer.hpp>
@@ -111,25 +109,6 @@ class serializer
               const bool ensure_ascii,
               const unsigned int indent_step,
               const unsigned int current_indent = 0)
-    {
-        dump_internal(val, pretty_print, ensure_ascii, indent_step, current_indent);
-        flush();
-    }
-
-  JSON_PRIVATE_UNLESS_TESTED:
-    /*!
-    @brief recursive worker for @ref dump
-
-    Identical in behavior to the historical @ref dump, but writes into the
-    serializer's internal @ref write_buffer instead of issuing a virtual call
-    per token. The public @ref dump wraps this and flushes the buffer once the
-    top-level value has been serialized.
-    */
-    void dump_internal(const BasicJsonType& val,
-                       const bool pretty_print,
-                       const bool ensure_ascii,
-                       const unsigned int indent_step,
-                       const unsigned int current_indent = 0)
     {
         switch (val.m_data.m_type)
         {
@@ -137,13 +116,13 @@ class serializer
             {
                 if (val.m_data.m_value.object->empty())
                 {
-                    put_chars("{}", 2);
+                    o->write_characters("{}", 2);
                     return;
                 }
 
                 if (pretty_print)
                 {
-                    put_chars("{\n", 2);
+                    o->write_characters("{\n", 2);
 
                     // variable to hold indentation for recursive calls
                     const auto new_indent = current_indent + indent_step;
@@ -156,51 +135,51 @@ class serializer
                     auto i = val.m_data.m_value.object->cbegin();
                     for (std::size_t cnt = 0; cnt < val.m_data.m_value.object->size() - 1; ++cnt, ++i)
                     {
-                        put_chars(indent_string.c_str(), new_indent);
-                        put_char('\"');
+                        o->write_characters(indent_string.c_str(), new_indent);
+                        o->write_character('\"');
                         dump_escaped(i->first, ensure_ascii);
-                        put_chars("\": ", 3);
-                        dump_internal(i->second, true, ensure_ascii, indent_step, new_indent);
-                        put_chars(",\n", 2);
+                        o->write_characters("\": ", 3);
+                        dump(i->second, true, ensure_ascii, indent_step, new_indent);
+                        o->write_characters(",\n", 2);
                     }
 
                     // last element
                     JSON_ASSERT(i != val.m_data.m_value.object->cend());
                     JSON_ASSERT(std::next(i) == val.m_data.m_value.object->cend());
-                    put_chars(indent_string.c_str(), new_indent);
-                    put_char('\"');
+                    o->write_characters(indent_string.c_str(), new_indent);
+                    o->write_character('\"');
                     dump_escaped(i->first, ensure_ascii);
-                    put_chars("\": ", 3);
-                    dump_internal(i->second, true, ensure_ascii, indent_step, new_indent);
+                    o->write_characters("\": ", 3);
+                    dump(i->second, true, ensure_ascii, indent_step, new_indent);
 
-                    put_char('\n');
-                    put_chars(indent_string.c_str(), current_indent);
-                    put_char('}');
+                    o->write_character('\n');
+                    o->write_characters(indent_string.c_str(), current_indent);
+                    o->write_character('}');
                 }
                 else
                 {
-                    put_char('{');
+                    o->write_character('{');
 
                     // first n-1 elements
                     auto i = val.m_data.m_value.object->cbegin();
                     for (std::size_t cnt = 0; cnt < val.m_data.m_value.object->size() - 1; ++cnt, ++i)
                     {
-                        put_char('\"');
+                        o->write_character('\"');
                         dump_escaped(i->first, ensure_ascii);
-                        put_chars("\":", 2);
-                        dump_internal(i->second, false, ensure_ascii, indent_step, current_indent);
-                        put_char(',');
+                        o->write_characters("\":", 2);
+                        dump(i->second, false, ensure_ascii, indent_step, current_indent);
+                        o->write_character(',');
                     }
 
                     // last element
                     JSON_ASSERT(i != val.m_data.m_value.object->cend());
                     JSON_ASSERT(std::next(i) == val.m_data.m_value.object->cend());
-                    put_char('\"');
+                    o->write_character('\"');
                     dump_escaped(i->first, ensure_ascii);
-                    put_chars("\":", 2);
-                    dump_internal(i->second, false, ensure_ascii, indent_step, current_indent);
+                    o->write_characters("\":", 2);
+                    dump(i->second, false, ensure_ascii, indent_step, current_indent);
 
-                    put_char('}');
+                    o->write_character('}');
                 }
 
                 return;
@@ -210,13 +189,13 @@ class serializer
             {
                 if (val.m_data.m_value.array->empty())
                 {
-                    put_chars("[]", 2);
+                    o->write_characters("[]", 2);
                     return;
                 }
 
                 if (pretty_print)
                 {
-                    put_chars("[\n", 2);
+                    o->write_characters("[\n", 2);
 
                     // variable to hold indentation for recursive calls
                     const auto new_indent = current_indent + indent_step;
@@ -229,37 +208,37 @@ class serializer
                     for (auto i = val.m_data.m_value.array->cbegin();
                             i != val.m_data.m_value.array->cend() - 1; ++i)
                     {
-                        put_chars(indent_string.c_str(), new_indent);
-                        dump_internal(*i, true, ensure_ascii, indent_step, new_indent);
-                        put_chars(",\n", 2);
+                        o->write_characters(indent_string.c_str(), new_indent);
+                        dump(*i, true, ensure_ascii, indent_step, new_indent);
+                        o->write_characters(",\n", 2);
                     }
 
                     // last element
                     JSON_ASSERT(!val.m_data.m_value.array->empty());
-                    put_chars(indent_string.c_str(), new_indent);
-                    dump_internal(val.m_data.m_value.array->back(), true, ensure_ascii, indent_step, new_indent);
+                    o->write_characters(indent_string.c_str(), new_indent);
+                    dump(val.m_data.m_value.array->back(), true, ensure_ascii, indent_step, new_indent);
 
-                    put_char('\n');
-                    put_chars(indent_string.c_str(), current_indent);
-                    put_char(']');
+                    o->write_character('\n');
+                    o->write_characters(indent_string.c_str(), current_indent);
+                    o->write_character(']');
                 }
                 else
                 {
-                    put_char('[');
+                    o->write_character('[');
 
                     // first n-1 elements
                     for (auto i = val.m_data.m_value.array->cbegin();
                             i != val.m_data.m_value.array->cend() - 1; ++i)
                     {
-                        dump_internal(*i, false, ensure_ascii, indent_step, current_indent);
-                        put_char(',');
+                        dump(*i, false, ensure_ascii, indent_step, current_indent);
+                        o->write_character(',');
                     }
 
                     // last element
                     JSON_ASSERT(!val.m_data.m_value.array->empty());
-                    dump_internal(val.m_data.m_value.array->back(), false, ensure_ascii, indent_step, current_indent);
+                    dump(val.m_data.m_value.array->back(), false, ensure_ascii, indent_step, current_indent);
 
-                    put_char(']');
+                    o->write_character(']');
                 }
 
                 return;
@@ -267,9 +246,9 @@ class serializer
 
             case value_t::string:
             {
-                put_char('\"');
+                o->write_character('\"');
                 dump_escaped(*val.m_data.m_value.string, ensure_ascii);
-                put_char('\"');
+                o->write_character('\"');
                 return;
             }
 
@@ -277,7 +256,7 @@ class serializer
             {
                 if (pretty_print)
                 {
-                    put_chars("{\n", 2);
+                    o->write_characters("{\n", 2);
 
                     // variable to hold indentation for recursive calls
                     const auto new_indent = current_indent + indent_step;
@@ -286,9 +265,9 @@ class serializer
                         indent_string.resize(indent_string.size() * 2, ' ');
                     }
 
-                    put_chars(indent_string.c_str(), new_indent);
+                    o->write_characters(indent_string.c_str(), new_indent);
 
-                    put_chars("\"bytes\": [", 10);
+                    o->write_characters("\"bytes\": [", 10);
 
                     if (!val.m_data.m_value.binary->empty())
                     {
@@ -296,30 +275,30 @@ class serializer
                                 i != val.m_data.m_value.binary->cend() - 1; ++i)
                         {
                             dump_integer(*i);
-                            put_chars(", ", 2);
+                            o->write_characters(", ", 2);
                         }
                         dump_integer(val.m_data.m_value.binary->back());
                     }
 
-                    put_chars("],\n", 3);
-                    put_chars(indent_string.c_str(), new_indent);
+                    o->write_characters("],\n", 3);
+                    o->write_characters(indent_string.c_str(), new_indent);
 
-                    put_chars("\"subtype\": ", 11);
+                    o->write_characters("\"subtype\": ", 11);
                     if (val.m_data.m_value.binary->has_subtype())
                     {
                         dump_integer(val.m_data.m_value.binary->subtype());
                     }
                     else
                     {
-                        put_chars("null", 4);
+                        o->write_characters("null", 4);
                     }
-                    put_char('\n');
-                    put_chars(indent_string.c_str(), current_indent);
-                    put_char('}');
+                    o->write_character('\n');
+                    o->write_characters(indent_string.c_str(), current_indent);
+                    o->write_character('}');
                 }
                 else
                 {
-                    put_chars("{\"bytes\":[", 10);
+                    o->write_characters("{\"bytes\":[", 10);
 
                     if (!val.m_data.m_value.binary->empty())
                     {
@@ -327,20 +306,20 @@ class serializer
                                 i != val.m_data.m_value.binary->cend() - 1; ++i)
                         {
                             dump_integer(*i);
-                            put_char(',');
+                            o->write_character(',');
                         }
                         dump_integer(val.m_data.m_value.binary->back());
                     }
 
-                    put_chars("],\"subtype\":", 12);
+                    o->write_characters("],\"subtype\":", 12);
                     if (val.m_data.m_value.binary->has_subtype())
                     {
                         dump_integer(val.m_data.m_value.binary->subtype());
-                        put_char('}');
+                        o->write_character('}');
                     }
                     else
                     {
-                        put_chars("null}", 5);
+                        o->write_characters("null}", 5);
                     }
                 }
                 return;
@@ -350,11 +329,11 @@ class serializer
             {
                 if (val.m_data.m_value.boolean)
                 {
-                    put_chars("true", 4);
+                    o->write_characters("true", 4);
                 }
                 else
                 {
-                    put_chars("false", 5);
+                    o->write_characters("false", 5);
                 }
                 return;
             }
@@ -379,13 +358,13 @@ class serializer
 
             case value_t::discarded:
             {
-                put_chars("<discarded>", 11);
+                o->write_characters("<discarded>", 11);
                 return;
             }
 
             case value_t::null:
             {
-                put_chars("null", 4);
+                o->write_characters("null", 4);
                 return;
             }
 
@@ -421,45 +400,6 @@ class serializer
 
         for (std::size_t i = 0; i < s.size(); ++i)
         {
-            // Fast path: at a character boundary (state == UTF8_ACCEPT),
-            // bulk-copy the longest run of bytes that need no escaping using a
-            // SWAR scanner shared with the lexer's contiguous path. The scanner
-            // stops exactly at the first byte dump_escaped would handle
-            // individually, so that byte is left to the byte-at-a-time path
-            // below, keeping escaping output and error diagnostics unchanged.
-            //
-            // - ensure_ascii == false: string_bulk_run() copies ordinary bytes
-            //   and complete well-formed UTF-8, stopping at a quote, backslash,
-            //   control character (< 0x20), or ill-formed/truncated sequence.
-            // - ensure_ascii == true: only printable ASCII may be copied
-            //   verbatim; find_ascii_copyable_run() additionally stops at 0x7F
-            //   and every non-ASCII byte (>= 0x80), which must be \u-escaped.
-            if (state == UTF8_ACCEPT)
-            {
-                const auto* const data = reinterpret_cast<const unsigned char*>(s.data());
-                const std::size_t run = ensure_ascii
-                                        ? find_ascii_copyable_run(data + i, s.size() - i)
-                                        : string_bulk_run(data + i, s.size() - i);
-                if (run != 0)
-                {
-                    // emit any bytes still pending in string_buffer first to
-                    // preserve output order, then write the run directly
-                    if (bytes != 0)
-                    {
-                        put_chars(string_buffer.data(), bytes);
-                        bytes = 0;
-                    }
-                    put_chars(s.data() + i, run);
-                    bytes_after_last_accept = 0;
-                    undumped_chars = 0;
-                    i += run;
-                    if (i >= s.size())
-                    {
-                        break;
-                    }
-                }
-            }
-
             const auto byte = static_cast<std::uint8_t>(s[i]);
 
             switch (decode(state, codepoint, byte))
@@ -548,7 +488,7 @@ class serializer
                     // written ("\uxxxx\uxxxx\0") for one code point
                     if (string_buffer.size() - bytes < 13)
                     {
-                        put_chars(string_buffer.data(), bytes);
+                        o->write_characters(string_buffer.data(), bytes);
                         bytes = 0;
                     }
 
@@ -607,7 +547,7 @@ class serializer
                                 // written ("\uxxxx\uxxxx\0") for one code point
                                 if (string_buffer.size() - bytes < 13)
                                 {
-                                    put_chars(string_buffer.data(), bytes);
+                                    o->write_characters(string_buffer.data(), bytes);
                                     bytes = 0;
                                 }
 
@@ -646,7 +586,7 @@ class serializer
             // write buffer
             if (bytes > 0)
             {
-                put_chars(string_buffer.data(), bytes);
+                o->write_characters(string_buffer.data(), bytes);
             }
         }
         else
@@ -662,22 +602,22 @@ class serializer
                 case error_handler_t::ignore:
                 {
                     // write all accepted bytes
-                    put_chars(string_buffer.data(), bytes_after_last_accept);
+                    o->write_characters(string_buffer.data(), bytes_after_last_accept);
                     break;
                 }
 
                 case error_handler_t::replace:
                 {
                     // write all accepted bytes
-                    put_chars(string_buffer.data(), bytes_after_last_accept);
+                    o->write_characters(string_buffer.data(), bytes_after_last_accept);
                     // add a replacement character
                     if (ensure_ascii)
                     {
-                        put_chars("\\ufffd", 6);
+                        o->write_characters("\\ufffd", 6);
                     }
                     else
                     {
-                        put_chars("\xEF\xBF\xBD", 3);
+                        o->write_characters("\xEF\xBF\xBD", 3);
                     }
                     break;
                 }
@@ -688,66 +628,6 @@ class serializer
         }
     }
 
-  private:
-    /*!
-    @brief append a single character to the write buffer
-
-    Structural characters ('{', '"', ',', ...) previously went straight to the
-    output adapter, one virtual call each. Buffering them and flushing in bulk
-    turns those many indirect calls into a single memcpy plus an occasional
-    flush, which dominates the cost of serializing object/array-heavy values.
-    */
-    void put_char(char c)
-    {
-        if (JSON_HEDLEY_UNLIKELY(write_buffer_pos == write_buffer.size()))
-        {
-            flush();
-        }
-        write_buffer[write_buffer_pos++] = c;
-    }
-
-    /*!
-    @brief append @a length characters to the write buffer
-
-    Runs that do not fit the buffer are written straight through the output
-    adapter (after flushing what is pending), so large string/number payloads
-    are not copied an extra time.
-    */
-    JSON_HEDLEY_NON_NULL(2)
-    void put_chars(const char* s, std::size_t length)
-    {
-        if (JSON_HEDLEY_UNLIKELY(length >= write_buffer.size()))
-        {
-            flush();
-            o->write_characters(s, length);
-            return;
-        }
-        if (JSON_HEDLEY_UNLIKELY(write_buffer_pos + length > write_buffer.size()))
-        {
-            flush();
-        }
-        std::memcpy(write_buffer.data() + write_buffer_pos, s, length);
-        write_buffer_pos += length;
-    }
-
-  JSON_PRIVATE_UNLESS_TESTED:
-    /*!
-    @brief flush the write buffer to the output adapter
-
-    Writing zero characters is a well-defined no-op for every output adapter, so
-    the buffered length is passed through unconditionally (no empty-guard branch
-    to leave uncovered).
-
-    @note dump_escaped() and dump_integer()/dump_float() write into the internal
-    write buffer; callers that invoke them directly (rather than through the
-    public dump()) must call flush() before inspecting the output.
-    */
-    void flush()
-    {
-        o->write_characters(write_buffer.data(), write_buffer_pos);
-        write_buffer_pos = 0;
-    }
-
   private:
     /*!
     @brief count digits
@@ -872,7 +752,7 @@ class serializer
         // special case for "0"
         if (x == 0)
         {
-            put_char('0');
+            o->write_character('0');
             return;
         }
 
@@ -925,7 +805,7 @@ class serializer
             *(--buffer_ptr) = static_cast<char>('0' + abs_value);
         }
 
-        put_chars(number_buffer.data(), n_chars);
+        o->write_characters(number_buffer.data(), n_chars);
     }
 
     /*!
@@ -941,7 +821,7 @@ class serializer
         // NaN / inf
         if (!std::isfinite(x))
         {
-            put_chars("null", 4);
+            o->write_characters("null", 4);
             return;
         }
 
@@ -962,7 +842,7 @@ class serializer
         auto* begin = number_buffer.data();
         auto* end = ::nlohmann::detail::to_chars(begin, begin + number_buffer.size(), x);
 
-        put_chars(begin, static_cast<size_t>(end - begin));
+        o->write_characters(begin, static_cast<size_t>(end - begin));
     }
 
     JSON_HEDLEY_NON_NULL(1)
@@ -1013,7 +893,7 @@ class serializer
             }
         }
 
-        put_chars(number_buffer.data(), static_cast<std::size_t>(len));
+        o->write_characters(number_buffer.data(), static_cast<std::size_t>(len));
 
         // determine if we need to append ".0"
         const bool value_is_int_like =
@@ -1025,7 +905,7 @@ class serializer
 
         if (value_is_int_like)
         {
-            put_chars(".0", 2);
+            o->write_characters(".0", 2);
         }
     }
 
@@ -1135,12 +1015,6 @@ class serializer
 
     /// error_handler how to react on decoding errors
     const error_handler_t error_handler;
-
-    /// buffer collecting output before it is flushed to the output adapter, so
-    /// that the many small structural writes become few bulk writes
-    std::array<char, 1024> write_buffer{{}};
-    /// number of valid bytes currently held in @ref write_buffer
-    std::size_t write_buffer_pos = 0;
 };
 
 }  // namespace detail

tests/src/unit-class_lexer.cpp

@@ -12,10 +12,6 @@
 #include <nlohmann/json.hpp>
 using nlohmann::json;
 
-#include <sstream> // stringstream
-#include <string> // string
-#include <vector> // vector
-
 namespace
 {
 // shortcut to scan a string literal
@@ -228,75 +224,3 @@ TEST_CASE("lexer class")
         CHECK((scan_string("/**//**//**/", true) == json::lexer::token_type::end_of_input));
     }
 }
-
-TEST_CASE("lexer number fast path")
-{
-    // The contiguous fast path (used for pointer/string input) must agree with
-    // the streaming byte path (used for std::istream) on token type, numeric
-    // value, and round-trip text for every well-formed number, and reject the
-    // same malformed numbers with the same message.
-    SECTION("contiguous vs streaming parity")
-    {
-        const std::vector<std::string> numbers =
-        {
-            "0", "-0", "1", "-1", "42", "-42", "10", "100", "1234567890",
-            "0.0", "-0.0", "3.14", "-3.14", "0.5", "-0.001", "123.456789",
-            "1e0", "1E0", "1e10", "1e-10", "1e+10", "1.5e3", "-2.5E-4",
-            "9223372036854775807",             // INT64_MAX -> unsigned
-            "9223372036854775808",             // INT64_MAX + 1 -> unsigned
-            "18446744073709551615",            // UINT64_MAX -> unsigned
-            "18446744073709551616",            // UINT64_MAX + 1 -> float
-            "-9223372036854775808",            // INT64_MIN -> integer
-            "-9223372036854775809",            // INT64_MIN - 1 -> float
-            "123456789012345678901234567890",  // huge -> float
-            "0.30000000000000004", "2.2250738585072014e-308", "1e308",
-            // high-precision / wide-exponent values that exercise the
-            // std::from_chars (Eisel-Lemire) path beyond the Clinger subset
-            "1.7976931348623157e308", "1.2345678901234567e-250",
-            "9007199254740993", "5e-324", "1e-320"
-        };
-
-        for (const auto& n : numbers)
-        {
-            const std::string doc = "[" + n + "]";
-
-            // contiguous fast path
-            const json a = json::parse(doc);
-            // streaming byte path
-            std::stringstream ss(doc);
-            const json b = json::parse(ss);
-
-            CAPTURE(n);
-            CHECK(a == b);
-            CHECK(a.dump() == b.dump());
-            CHECK(a[0].type() == b[0].type());
-        }
-    }
-
-    SECTION("token type classification")
-    {
-        CHECK((scan_string("0") == json::lexer::token_type::value_unsigned));
-        CHECK((scan_string("-1") == json::lexer::token_type::value_integer));
-        CHECK((scan_string("1.5") == json::lexer::token_type::value_float));
-        CHECK((scan_string("1e5") == json::lexer::token_type::value_float));
-        CHECK((scan_string("18446744073709551615") == json::lexer::token_type::value_unsigned));
-        CHECK((scan_string("18446744073709551616") == json::lexer::token_type::value_float));
-        CHECK((scan_string("-9223372036854775808") == json::lexer::token_type::value_integer));
-        CHECK((scan_string("-9223372036854775809") == json::lexer::token_type::value_float));
-    }
-
-    SECTION("malformed numbers are rejected identically")
-    {
-        for (const char* bad :
-                {"-", "1.", "1e", "1e+", "1.2e", "01", "-01", "1..2", "1.2.3"
-                })
-        {
-            CAPTURE(bad);
-            // the contiguous fast path must decline and let the byte path report
-            const std::string doc = std::string("[") + bad + "]";
-            CHECK_FALSE(json::accept(doc));
-            std::stringstream ss(doc);
-            CHECK_FALSE(json::accept(ss));
-        }
-    }
-}

tests/src/unit-convenience.cpp

@@ -100,7 +100,6 @@ void check_escaped(const char* original, const char* escaped, const bool ensure_
     std::stringstream ss;
     json::serializer s(nlohmann::detail::output_adapter<char>(ss), ' ');
     s.dump_escaped(original, ensure_ascii);
-    s.flush(); // dump_escaped writes into the serializer's internal buffer
     CHECK(ss.str() == escaped);
 }
 } // namespace

tests/src/unit-conversions.cpp

@@ -1782,21 +1782,6 @@ TEST_CASE("std::optional")
                              "[json.exception.type_error.302] type must be string, but is null", json::type_error&);
         CHECK_THROWS_WITH_AS(std::optional<int>(j_null),
                              "[json.exception.type_error.302] type must be number, but is null", json::type_error&);
-
-        // Assignment goes through the same overload resolution as direct
-        // construction, so it throws for the same reason. This relies on
-        // basic_json's implicit conversion operator, so it only applies
-        // when JSON_USE_IMPLICIT_CONVERSIONS is enabled (the default).
-#if JSON_USE_IMPLICIT_CONVERSIONS
-        std::optional<std::string> opt_assign;
-        CHECK_THROWS_WITH_AS(opt_assign = j_null,
-                             "[json.exception.type_error.302] type must be string, but is null", json::type_error&);
-#endif
-
-        // get_to() is the correct way to obtain std::nullopt from a JSON null.
-        std::optional<std::string> opt_get_to = "placeholder";
-        j_null.get_to(opt_get_to);
-        CHECK(opt_get_to == std::nullopt);
     }
 
     SECTION("string")

tests/src/unit-regression2.cpp

@@ -1136,40 +1136,6 @@ TEST_CASE("regression tests 2")
         CHECK((decoded == json_4804::array()));
     }
 
-    SECTION("discussion #4209 - custom BinaryType direct assignment and round-tripping")
-    {
-        // Test that assigning a custom BinaryType directly creates a binary value, not an array
-        const std::vector<std::byte> original{std::byte{1}, std::byte{2}, std::byte{3}};
-        const json_4804 j = original;
-        CHECK(j.is_binary());
-        CHECK(!j.is_array());
-
-        // Test round-tripping: extracting the binary value back as the custom container type
-        const auto extracted = j.get<std::vector<std::byte>>();
-        CHECK(extracted == original);
-
-        // Test that the default json alias behavior is unchanged: std::vector<uint8_t> -> array
-        const json default_json = std::vector<std::uint8_t> {1, 2, 3};
-        CHECK(default_json.is_array());
-        CHECK(!default_json.is_binary());
-    }
-
-    SECTION("discussion #4209 - custom BinaryType extraction from parsed array")
-    {
-        // Test that extracting a custom BinaryType from a parsed JSON array still works
-        // (not just from a binary-typed node)
-        const auto j = json_4804::parse("[1,2,3]");
-        CHECK(j.is_array());
-        CHECK(!j.is_binary());
-
-        // Extracting as custom BinaryType should work from arrays
-        const auto extracted = j.get<std::vector<std::byte>>();
-        CHECK(extracted.size() == 3);
-        CHECK(extracted[0] == std::byte{1});
-        CHECK(extracted[1] == std::byte{2});
-        CHECK(extracted[2] == std::byte{3});
-    }
-
     SECTION("issue #5046 - implicit conversion of return json to std::optional no longer implicit")
     {
         const json jval{};
@@ -1199,46 +1165,6 @@ TEST_CASE("regression tests 2")
     }
 #endif
 
-#if JSON_HAS_RANGES && !defined(__MINGW32__)
-    SECTION("issue #4916 - constructing array from C++20 ranges view does not work")
-    {
-        std::vector<int> nums{1, 2, 37, 42, 21};
-        auto filteredNums = nums | std::views::filter([](int i)
-        {
-            return i > 10;
-        });
-        json const j(filteredNums);
-        CHECK(j.type() == json::value_t::array);
-        CHECK(j == json({37, 42, 21}));
-    }
-#endif
-
-    // owning_view is not available in libstdc++ < 12
-#if JSON_HAS_RANGES && !defined(__MINGW32__) && !(defined(__GLIBCXX__) && _GLIBCXX_RELEASE < 12)
-    SECTION("issue #4916 - constructing array from prvalue C++20 ranges view (owning_view)")
-    {
-        json const j(std::vector<int> {1, 2, 37, 42, 21} | std::views::filter([](int i)
-        {
-            return i > 10;
-        }));
-        CHECK(j.type() == json::value_t::array);
-        CHECK(j == json({37, 42, 21}));
-    }
-#endif
-
-#if JSON_HAS_RANGES && !defined(__MINGW32__)
-    SECTION("issue #4916 - constructing array from C++20 transform view (prvalue elements)")
-    {
-        std::vector<int> nums{1, 2, 3};
-        auto t = nums | std::views::transform([](int i) noexcept
-        {
-            return i * 2;
-        });
-        json const j(t);
-        CHECK(j.type() == json::value_t::array);
-        CHECK(j == json({2, 4, 6}));
-    }
-#endif
 }
 
 TEST_CASE_TEMPLATE("issue #4798 - nlohmann::json::to_msgpack() encode float NaN as double", T, double, float) // NOLINT(readability-math-missing-parentheses, bugprone-throwing-static-initialization)

tests/src/unit-serialization.cpp

@@ -382,91 +382,3 @@ TEST_CASE("dump for basic_json with long double number_float_t")
         check_same(100.0L,  100.0);
     }
 }
-
-TEST_CASE("serialization of strings (bulk fast path)")
-{
-    // These cases exercise the SWAR bulk-copy fast path in dump_escaped and the
-    // internal write buffer: long runs, escapes interrupting runs, 0x7F/DEL,
-    // multibyte UTF-8 under both ensure_ascii settings, and payloads larger than
-    // the write buffer.
-
-    SECTION("long unescaped ASCII exceeds the write buffer")
-    {
-        const std::string big(3000, 'a');
-        const json j = big;
-        CHECK(j.dump() == '"' + big + '"');
-        CHECK(j.dump(-1, ' ', true) == '"' + big + '"');
-        // round-trips
-        CHECK(json::parse(j.dump()) == j);
-    }
-
-    SECTION("runs interrupted by escapes")
-    {
-        const json j = std::string(500, 'x') + "\n\"\\" + std::string(500, 'y');
-        const std::string out = j.dump();
-        CHECK(out == '"' + std::string(500, 'x') + "\\n\\\"\\\\" + std::string(500, 'y') + '"');
-        CHECK(json::parse(out) == j);
-    }
-
-    SECTION("DEL (0x7F) depends on ensure_ascii")
-    {
-        const json j = std::string("a\x7f" "b");
-        CHECK(j.dump(-1, ' ', false) == "\"a\x7f" "b\"");   // copied verbatim
-        CHECK(j.dump(-1, ' ', true) == "\"a\\u007fb\"");    // escaped
-    }
-
-    SECTION("multibyte UTF-8 under both ensure_ascii settings")
-    {
-        const json j = std::string("A\xc3\xa9\xe4\xbd\xa0\xf0\x9f\x98\x80Z"); // A é 你 😀 Z
-        // not escaping non-ASCII: bytes are copied through the bulk validator
-        CHECK(j.dump(-1, ' ', false) == "\"A\xc3\xa9\xe4\xbd\xa0\xf0\x9f\x98\x80Z\"");
-        // ensure_ascii: escaped (with a surrogate pair for the emoji)
-        CHECK(j.dump(-1, ' ', true) == "\"A\\u00e9\\u4f60\\ud83d\\ude00Z\"");
-        CHECK(json::parse(j.dump(-1, ' ', true)) == j);
-    }
-
-    SECTION("many small structural writes exceed the write buffer")
-    {
-        json arr = json::array();
-        for (int i = 0; i < 2000; ++i)
-        {
-            arr.push_back(i);
-        }
-        const std::string out = arr.dump();
-        CHECK(out.front() == '[');
-        CHECK(out.back() == ']');
-        CHECK(json::parse(out) == arr);
-
-        json obj = json::object();
-        for (int i = 0; i < 500; ++i)
-        {
-            obj["key" + std::to_string(i)] = i;
-        }
-        CHECK(json::parse(obj.dump()) == obj);
-        CHECK(json::parse(obj.dump(2)) == obj);
-
-        // an array of many empty strings emits a long run of single-character
-        // writes ('"', '"', ',') at shallow nesting depth, so the write buffer
-        // fills and flushes mid-run without the deep recursion that would
-        // overflow the stack on some debug builds
-        json many_empty = json::array();
-        for (int i = 0; i < 500; ++i)
-        {
-            many_empty.push_back("");
-        }
-        const std::string out2 = many_empty.dump();
-        CHECK(out2.size() > 1024); // spans multiple write-buffer flushes
-        CHECK(out2.front() == '[');
-        CHECK(out2.back() == ']');
-        CHECK(json::parse(out2) == many_empty);
-    }
-
-    SECTION("invalid UTF-8 handling is unaffected by the fast path")
-    {
-        const json j = std::string("valid\xff" "more");
-        CHECK_THROWS_WITH_AS(j.dump(), "[json.exception.type_error.316] invalid UTF-8 byte at index 5: 0xFF", json::type_error&);
-        CHECK(j.dump(-1, ' ', false, json::error_handler_t::replace) == "\"valid\xef\xbf\xbd" "more\"");
-        CHECK(j.dump(-1, ' ', true, json::error_handler_t::replace) == "\"valid\\ufffdmore\"");
-        CHECK(j.dump(-1, ' ', false, json::error_handler_t::ignore) == "\"validmore\"");
-    }
-}

tests/src/unit-user_defined_input.cpp

@@ -216,16 +216,15 @@ TEST_CASE("Parse with heterogeneous iterator and sentinel types")
 // JSON_HAS_CPP_20 (do not remove; see note at top of file)
 TEST_CASE("Parse with std::counted_iterator and std::default_sentinel_t")
 {
-    using iterator_type = std::string::const_iterator;
     const std::string json_str = R"({"key":"value","array":[1,2,3]})";
-    const auto len = static_cast<std::iter_difference_t<iterator_type>>(json_str.size());
+    const auto len = static_cast<std::iter_difference_t<std::string::const_iterator>>(json_str.size());
 
-    const std::counted_iterator<iterator_type> first(json_str.begin(), len);
+    std::counted_iterator first(json_str.begin(), len);
     const json j = json::parse(first, std::default_sentinel);
     CHECK(j["key"] == "value");
     CHECK(j["array"].size() == 3);
 
-    const std::counted_iterator<iterator_type> first2(json_str.begin(), len);
+    std::counted_iterator first2(json_str.begin(), len);
     CHECK(json::accept(first2, std::default_sentinel));
 }
 #endif

tests/src/unit-wstring.cpp

@@ -53,27 +53,6 @@ TEST_CASE("wide strings")
             std::wstring const w = L"\"\xDBFF";
             json _;
             CHECK_THROWS_AS(_ = json::parse(w), json::parse_error&);
-
-            // the exact message depends on the width of wchar_t: a 16-bit
-            // wchar_t passes the lone surrogate to the UTF-8 decoder unchanged
-            // (rejected as a single ill-formed byte at column 2), while a
-            // 32-bit wchar_t first encodes it as an ill-formed three-byte
-            // sequence (rejected one byte later, at column 3)
-            const char* const error_low_surrogate = sizeof(wchar_t) == 2
-                                                    ? "[json.exception.parse_error.101] parse error at line 1, column 2: syntax error while parsing value - invalid string: ill-formed UTF-8 byte; last read: '\"<U+0000>'"
-                                                    : "[json.exception.parse_error.101] parse error at line 1, column 3: syntax error while parsing value - invalid string: ill-formed UTF-8 byte; last read: '\"\xED\xB0'";
-            const char* const error_high_surrogate = sizeof(wchar_t) == 2
-                ? "[json.exception.parse_error.101] parse error at line 1, column 2: syntax error while parsing value - invalid string: ill-formed UTF-8 byte; last read: '\"<U+0000>'"
-                : "[json.exception.parse_error.101] parse error at line 1, column 3: syntax error while parsing value - invalid string: ill-formed UTF-8 byte; last read: '\"\xED\xA0'";
-
-            // a lone low surrogate cannot start a pair
-            CHECK_THROWS_WITH_AS(_ = json::parse(std::wstring{L'"', static_cast<wchar_t>(0xDC00), L'"'}), error_low_surrogate, json::parse_error&);
-            // a high surrogate followed by a non-low-surrogate unit is invalid
-            CHECK_THROWS_WITH_AS(_ = json::parse(std::wstring{L'"', static_cast<wchar_t>(0xD800), L'a', L'"'}), error_high_surrogate, json::parse_error&);
-            // a lone low surrogate must not swallow the following unit: pairing
-            // it with any second unit would produce valid UTF-8, so the error
-            // has to report an ill-formed byte at the surrogate's own position
-            CHECK_THROWS_WITH_AS(_ = json::parse(std::wstring{L'"', static_cast<wchar_t>(0xDC00), L'a', L'"'}), error_low_surrogate, json::parse_error&);
         }
     }
 
@@ -89,22 +68,11 @@ TEST_CASE("wide strings")
 
     SECTION("invalid std::u16string")
     {
-        if (u16string_is_utf16())
+        if (wstring_is_utf16())
         {
             std::u16string const w = u"\"\xDBFF";
             json _;
             CHECK_THROWS_AS(_ = json::parse(w), json::parse_error&);
-
-            // a lone low surrogate cannot start a pair
-            CHECK_THROWS_WITH_AS(_ = json::parse(std::u16string{u'"', 0xDC00, u'"'}), "[json.exception.parse_error.101] parse error at line 1, column 2: syntax error while parsing value - invalid string: ill-formed UTF-8 byte; last read: '\"<U+0000>'", json::parse_error&);
-            // a high surrogate followed by a non-low-surrogate unit is invalid
-            CHECK_THROWS_WITH_AS(_ = json::parse(std::u16string{u'"', 0xD800, u'a', u'"'}), "[json.exception.parse_error.101] parse error at line 1, column 2: syntax error while parsing value - invalid string: ill-formed UTF-8 byte; last read: '\"<U+0000>'", json::parse_error&);
-            // a lone low surrogate must not swallow the following unit: pairing
-            // it with any second unit would produce valid UTF-8, so the error
-            // has to report an ill-formed byte at the surrogate's own position
-            CHECK_THROWS_WITH_AS(_ = json::parse(std::u16string{u'"', 0xDC00, u'a', u'"'}), "[json.exception.parse_error.101] parse error at line 1, column 2: syntax error while parsing value - invalid string: ill-formed UTF-8 byte; last read: '\"<U+0000>'", json::parse_error&);
-            // a valid surrogate pair is still decoded (U+1F600)
-            CHECK(json::parse(std::u16string{u'"', 0xD83D, 0xDE00, u'"'}).get<std::string>() == "\xF0\x9F\x98\x80");
         }
     }