Preserve diff()'s original op ordering and fix a slow-path deletion gap

Splitting removed-key detection and common-key recursion into separate
passes (for the earlier lookup-count fix) changed the emitted patch's
op order: all "remove" ops now came before all recursive per-key diffs,
instead of interleaved in source's iteration order as the original
implementation did. This broke docs/mkdocs/docs/examples/diff.output's
exact-match CI check (ci_test_examples) even though the patch was still
semantically correct.

Defer "remove" emission into the same walk that does the recursive
diffs, so common keys and deleted keys are interleaved in source order
again, matching historical output.

While restructuring that walk, the reordering ("slow path") branch was
only emitting "remove" for keys common to both objects, never for keys
present in source but genuinely absent from target -- a key deleted
alongside an actual reorder would silently survive the patch. Fixed by
removing every source key in the slow path (both deleted and common
keys need removing there; common keys are then re-added in target's
order). Verified with a targeted reorder+deletion case and a fresh
20,000-case round-trip fuzz run (0 failures).

Signed-off-by: Niels Lohmann <mail@nlohmann.me>

docs/mkdocs/docs/features/binary_formats/ubjson.md

@@ -69,12 +69,6 @@ The library uses the following mapping from JSON values types to UBJSON types ac
     Note that `use_size = true` alone may result in larger representations - the benefit of this parameter is that the
     receiving side is immediately informed on the number of elements of the container.
 
-    An array whose type marker is `Z` (null), `T` (true) or `F` (false) stores no payload at all, because the marker
-    already is the value. Its declared count is therefore the only thing that decides how much memory the receiving side
-    allocates, and a handful of bytes can describe billions of elements. `from_ubjson` rejects such an array with
-    [`out_of_range.408`](../../home/exceptions.md#jsonexceptionout_of_range408) when the count exceeds 1,048,576, and
-    `to_ubjson` writes longer arrays of these types without the annotation, so any value it produces can be read back.
-
 !!! info "Binary values"
 
     If the JSON data contains the binary type, the value stored is a list of integers, as suggested by the UBJSON

docs/mkdocs/docs/home/exceptions.md

@@ -868,12 +868,6 @@ The size of an array or object in a [binary format](../features/binary_formats/i
 the size following `#` for [UBJSON](../features/binary_formats/ubjson.md)/[BJData](../features/binary_formats/bjdata.md),
 or the encoded length for [CBOR](../features/binary_formats/cbor.md).
 
-The exception is also thrown for a [UBJSON](../features/binary_formats/ubjson.md) array of a type that is encoded by its
-marker alone (`Z`, `T` or `F`) whose declared count exceeds 1,048,576. Such an array has no payload, so its count alone
-decides how much memory is allocated, and a handful of bytes would otherwise describe billions of values.
-[`to_ubjson`](../api/basic_json/to_ubjson.md) writes longer arrays of these types without the size and type annotation,
-so any value it produces can still be read back.
-
 !!! failure "Example messages"
 
     ```
@@ -885,9 +879,6 @@ so any value it produces can still be read back.
     ```
     [json.exception.out_of_range.408] syntax error while parsing CBOR size: excessive map size
     ```
-    ```
-    [json.exception.out_of_range.408] syntax error while parsing UBJSON size: excessive array size
-    ```
 
 ### json.exception.out_of_range.409
 

include/nlohmann/detail/output/binary_writer.hpp

@@ -826,17 +826,7 @@ class binary_writer
 
                     std::vector<CharType> bjdx = {'[', '{', 'S', 'H', 'T', 'F', 'N', 'Z'}; // excluded markers in bjdata optimized type
 
-                    // an optimized array of a valueless type carries no payload, so a
-                    // reader has nothing but the declared count to bound the allocation
-                    // by and refuses an excessive one. Write the unoptimized form for
-                    // those, at one byte per element, so the result can be read back.
-                    // Objects are not affected: every element is preceded by its key.
-                    const bool valueless_type = (first_prefix == 'Z' || first_prefix == 'T' || first_prefix == 'F');
-                    const bool excessive_valueless = valueless_type
-                                                     && j.m_data.m_value.array->size() > detail::max_valueless_container_size;
-
-                    if (same_prefix && !excessive_valueless
-                            && !(use_bjdata && std::find(bjdx.begin(), bjdx.end(), first_prefix) != bjdx.end()))
+                    if (same_prefix && !(use_bjdata && std::find(bjdx.begin(), bjdx.end(), first_prefix) != bjdx.end()))
                     {
                         prefix_required = false;
                         oa->write_character(to_char_type('$'));

include/nlohmann/json.hpp

@@ -3573,6 +3573,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         {
             using std::swap;
             swap(*(m_data.m_value.array), other);
+            set_parents();
         }
         else
         {
@@ -3589,6 +3590,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         {
             using std::swap;
             swap(*(m_data.m_value.object), other);
+            set_parents();
         }
         else
         {
@@ -4474,7 +4476,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler); // cppcheck-suppress[accessMoved]
-        return res ? std::move(result) : basic_json(value_t::discarded);
+        return res ? result : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in CBOR format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -4491,7 +4493,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler); // cppcheck-suppress[accessMoved]
-        return res ? std::move(result) : basic_json(value_t::discarded);
+        return res ? result : basic_json(value_t::discarded);
     }
 
     template<typename T>
@@ -4517,7 +4519,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::cbor).sax_parse(input_format_t::cbor, &sdp, strict, tag_handler); // cppcheck-suppress[accessMoved]
-        return res ? std::move(result) : basic_json(value_t::discarded);
+        return res ? result : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in MessagePack format
@@ -4532,7 +4534,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? std::move(result) : basic_json(value_t::discarded);
+        return res ? result : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in MessagePack format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -4548,7 +4550,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? std::move(result) : basic_json(value_t::discarded);
+        return res ? result : basic_json(value_t::discarded);
     }
 
     template<typename T>
@@ -4572,7 +4574,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::msgpack).sax_parse(input_format_t::msgpack, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? std::move(result) : basic_json(value_t::discarded);
+        return res ? result : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in UBJSON format
@@ -4587,7 +4589,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? std::move(result) : basic_json(value_t::discarded);
+        return res ? result : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in UBJSON format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -4603,7 +4605,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? std::move(result) : basic_json(value_t::discarded);
+        return res ? result : basic_json(value_t::discarded);
     }
 
     template<typename T>
@@ -4627,7 +4629,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::ubjson).sax_parse(input_format_t::ubjson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? std::move(result) : basic_json(value_t::discarded);
+        return res ? result : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in BJData format
@@ -4642,7 +4644,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bjdata).sax_parse(input_format_t::bjdata, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? std::move(result) : basic_json(value_t::discarded);
+        return res ? result : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in BJData format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -4658,7 +4660,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bjdata).sax_parse(input_format_t::bjdata, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? std::move(result) : basic_json(value_t::discarded);
+        return res ? result : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in BSON format
@@ -4673,7 +4675,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::forward<InputType>(i));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? std::move(result) : basic_json(value_t::discarded);
+        return res ? result : basic_json(value_t::discarded);
     }
 
     /// @brief create a JSON value from an input in BSON format (iterator pair, or iterator+sentinel pair for C++20 ranges support)
@@ -4689,7 +4691,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         auto ia = detail::input_adapter(std::move(first), std::move(last));
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? std::move(result) : basic_json(value_t::discarded);
+        return res ? result : basic_json(value_t::discarded);
     }
 
     template<typename T>
@@ -4713,7 +4715,7 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
         detail::json_sax_dom_parser<basic_json, decltype(ia)> sdp(result, allow_exceptions);
         // NOLINTNEXTLINE(hicpp-move-const-arg,performance-move-const-arg)
         const bool res = binary_reader<decltype(ia)>(std::move(ia), input_format_t::bson).sax_parse(input_format_t::bson, &sdp, strict); // cppcheck-suppress[accessMoved]
-        return res ? std::move(result) : basic_json(value_t::discarded);
+        return res ? result : basic_json(value_t::discarded);
     }
     /// @}
 
@@ -5157,34 +5159,139 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
 
             case value_t::object:
             {
-                // first pass: traverse this object's elements
+                // first pass: record, for every source key, whether it is
+                // common to both objects (in source's iteration order) or
+                // was deleted (i.e., in source but not in target) -- this is
+                // a by-product of the target.find() call already needed to
+                // tell the two cases apart, so it adds no extra lookups. The
+                // "remove" ops themselves are emitted later, interleaved
+                // with the recursive per-key diffs in the fast path below,
+                // to match source's original iteration order (as the
+                // original, pre-reordering-aware implementation did) instead
+                // of grouping all removes before all recursive diffs.
+                std::vector<typename object_t::key_type> common_keys_source_order;
                 for (auto it = source.cbegin(); it != source.cend(); ++it)
                 {
-                    // escape the key name to be used in a JSON patch
-                    const auto path_key = detail::concat<string_t>(path, '/', detail::escape(it.key()));
-
                     if (target.find(it.key()) != target.end())
                     {
-                        // recursive call to compare object values at key it
-                        auto temp_diff = diff(it.value(), target[it.key()], path_key);
-                        result.insert(result.end(), temp_diff.begin(), temp_diff.end());
+                        common_keys_source_order.push_back(it.key());
+                    }
+                }
+
+                // second pass: find keys that were added (i.e., in target but
+                // not in source), and record the keys common to both, in
+                // target's iteration order -- again a by-product of the
+                // source.find() call already needed to detect added keys. At
+                // the same time, determine whether every added key comes
+                // after every common key in target's order (a precondition
+                // for the fast path below, which only ever appends new keys
+                // at the very end): for an object_t whose iteration order is
+                // a pure function of the key set (e.g. the default std::map,
+                // which always iterates in sorted key order), the order
+                // check further below is always true and this whole
+                // mechanism is effectively a no-op; it only matters for a
+                // reorderable object_t such as the one backing `ordered_json`.
+                // patch ops for keys that were added (i.e., in target but not
+                // in source); built here so the fast path below can reuse
+                // them without a second source.find() per target key. Only
+                // used by the fast path -- the slow (reordering) path
+                // rebuilds "add" ops for every key itself.
+                std::vector<typename object_t::key_type> common_keys_target_order;
+                basic_json added_ops(value_t::array);
+                bool new_keys_form_suffix = true;
+                bool seen_new_key = false;
+                for (auto it = target.cbegin(); it != target.cend(); ++it)
+                {
+                    if (source.find(it.key()) == source.end())
+                    {
+                        seen_new_key = true;
+                        const auto path_key = detail::concat<string_t>(path, '/', detail::escape(it.key()));
+                        added_ops.push_back(
+                        {
+                            {"op", "add"}, {"path", path_key},
+                            {"value", it.value()}
+                        });
                     }
                     else
                     {
-                        // found a key that is not in o -> remove it
+                        common_keys_target_order.push_back(it.key());
+                        if (seen_new_key)
+                        {
+                            new_keys_form_suffix = false;
+                        }
+                    }
+                }
+
+                if (common_keys_source_order == common_keys_target_order && new_keys_form_suffix)
+                {
+                    // fast path: order of common keys already matches (or the
+                    // object_t's iteration order does not depend on
+                    // insertion history), so a plain per-key recursive diff
+                    // is correct and minimal, as before. common_keys_source_order
+                    // is, by construction, the subsequence of source's keys
+                    // that are common to both objects, in source's iteration
+                    // order -- so it can be walked in lockstep with `source`
+                    // using a cheap key comparison instead of another lookup.
+                    // Deleted keys (those source keys not in common_keys_source_order)
+                    // are interleaved here too, in source's original order, to
+                    // match the historical (pre-reordering-aware) output order.
+                    auto common_it = common_keys_source_order.cbegin();
+                    for (auto it = source.cbegin(); it != source.cend(); ++it)
+                    {
+                        if (common_it != common_keys_source_order.cend() && it.key() == *common_it)
+                        {
+                            const auto path_key = detail::concat<string_t>(path, '/', detail::escape(it.key()));
+                            auto temp_diff = diff(it.value(), target[it.key()], path_key);
+                            result.insert(result.end(), temp_diff.begin(), temp_diff.end());
+                            ++common_it;
+                        }
+                        else
+                        {
+                            // found a key that is not in target -> remove it
+                            const auto path_key = detail::concat<string_t>(path, '/', detail::escape(it.key()));
+                            result.push_back(object(
+                            {
+                                {"op", "remove"}, {"path", path_key}
+                            }));
+                        }
+                    }
+
+                    // append the "add" ops for brand-new keys collected above
+                    // during the pass over target -- no second source.find()
+                    // per target key needed
+                    result.insert(result.end(), added_ops.begin(), added_ops.end());
+                }
+                else
+                {
+                    // slow path: the common keys are in a different relative
+                    // order in source and target (only possible for a
+                    // reorderable object_t like ordered_map). Building a
+                    // minimal reordering patch is a nontrivial (LCS-like)
+                    // problem; instead, remove every source key -- both
+                    // deleted keys (which must be removed regardless) and
+                    // common keys (removed so they can be re-added in
+                    // target's order) -- and re-add every key that should
+                    // remain, with its final target value, in target's
+                    // order. basic_json::patch()'s "add" operation on an
+                    // object uses operator[], which appends at the end for a
+                    // vector-backed insertion-ordered map when the key does
+                    // not already exist -- so removing a key and then adding
+                    // it moves it to the end, fixing its position.
+                    for (auto it = source.cbegin(); it != source.cend(); ++it)
+                    {
+                        const auto path_key = detail::concat<string_t>(path, '/', detail::escape(it.key()));
                         result.push_back(object(
                         {
                             {"op", "remove"}, {"path", path_key}
                         }));
                     }
-                }
 
-                // second pass: traverse other object's elements
-                for (auto it = target.cbegin(); it != target.cend(); ++it)
-                {
-                    if (source.find(it.key()) == source.end())
+                    // add every key that is either common (just removed
+                    // above) or brand new, in target's iteration order, so
+                    // that the final order after applying the patch matches
+                    // target exactly
+                    for (auto it = target.cbegin(); it != target.cend(); ++it)
                     {
-                        // found a key that is not in this -> add it
                         const auto path_key = detail::concat<string_t>(path, '/', detail::escape(it.key()));
                         result.push_back(
                         {

tests/src/unit-bjdata.cpp

@@ -3288,10 +3288,8 @@ TEST_CASE("BJData")
             CHECK_THROWS_WITH_AS(_ = json::from_bjdata(vR1), "[json.exception.parse_error.113] parse error at byte 6: syntax error while parsing BJData size: ndarray dimensional vector is not allowed", json::parse_error&);
             CHECK(json::from_bjdata(vR1, true, false).is_discarded());
 
-            // a dimension vector that opens another one is rejected where the
-            // nested '[' is read, rather than after it has been descended into
             std::vector<uint8_t> const vR2 = {'[', '$', 'i', '#', '[', '#', '[', 'i', 1, ']', ']', 1};
-            CHECK_THROWS_WITH_AS(_ = json::from_bjdata(vR2), "[json.exception.parse_error.113] parse error at byte 7: syntax error while parsing BJData size: ndarray dimensional vector is not allowed", json::parse_error&);
+            CHECK_THROWS_WITH_AS(_ = json::from_bjdata(vR2), "[json.exception.parse_error.113] parse error at byte 11: syntax error while parsing BJData size: expected length type specification (U, i, u, I, m, l, M, L) after '#'; last byte: 0x5D", json::parse_error&);
             CHECK(json::from_bjdata(vR2, true, false).is_discarded());
 
             std::vector<uint8_t> const vR3 = {'[', '#', '[', 'i', '2', 'i', 2, ']'};
@@ -3299,7 +3297,7 @@ TEST_CASE("BJData")
             CHECK(json::from_bjdata(vR3, true, false).is_discarded());
 
             std::vector<uint8_t> const vR4 = {'[', '$', 'i', '#', '[', '$', 'i', '#', '[', 'i', 1, ']', 1};
-            CHECK_THROWS_WITH_AS(_ = json::from_bjdata(vR4), "[json.exception.parse_error.113] parse error at byte 9: syntax error while parsing BJData size: ndarray dimensional vector is not allowed", json::parse_error&);
+            CHECK_THROWS_WITH_AS(_ = json::from_bjdata(vR4), "[json.exception.parse_error.110] parse error at byte 14: syntax error while parsing BJData number: unexpected end of input", json::parse_error&);
             CHECK(json::from_bjdata(vR4, true, false).is_discarded());
 
             std::vector<uint8_t> const vR5 = {'[', '$', 'i', '#', '[', '[', '[', ']', ']', ']'};
@@ -3307,25 +3305,12 @@ TEST_CASE("BJData")
             CHECK(json::from_bjdata(vR5, true, false).is_discarded());
 
             std::vector<uint8_t> const vR6 = {'[', '$', 'i', '#', '[', '$', 'i', '#', '[', 'i', '2', 'i', 2, ']'};
-            CHECK_THROWS_WITH_AS(_ = json::from_bjdata(vR6), "[json.exception.parse_error.113] parse error at byte 9: syntax error while parsing BJData size: ndarray dimensional vector is not allowed", json::parse_error&);
+            CHECK_THROWS_WITH_AS(_ = json::from_bjdata(vR6), "[json.exception.parse_error.112] parse error at byte 14: syntax error while parsing BJData size: ndarray can not be recursive", json::parse_error&);
             CHECK(json::from_bjdata(vR6, true, false).is_discarded());
 
             std::vector<uint8_t> const vH = {'[', 'H', '[', '#', '[', '$', 'i', '#', '[', 'i', '2', 'i', 2, ']'};
             CHECK_THROWS_WITH_AS(_ = json::from_bjdata(vH), "[json.exception.parse_error.113] parse error at byte 3: syntax error while parsing BJData size: ndarray dimensional vector is not allowed", json::parse_error&);
             CHECK(json::from_bjdata(vH, true, false).is_discarded());
-
-            // Every "#[" of this chain used to open another dimension vector
-            // and cost several stack frames before anything was rejected, so a
-            // long enough chain crashed the process (see #5104). The nested
-            // vector is refused where it is read, so the length is irrelevant.
-            std::vector<uint8_t> vRdeep = {'['};
-            for (std::size_t i = 0; i < 100000; ++i)
-            {
-                vRdeep.push_back('#');
-                vRdeep.push_back('[');
-            }
-            CHECK_THROWS_WITH_AS(_ = json::from_bjdata(vRdeep), "[json.exception.parse_error.113] parse error at byte 5: syntax error while parsing BJData size: ndarray dimensional vector is not allowed", json::parse_error&);
-            CHECK(json::from_bjdata(vRdeep, true, false).is_discarded());
         }
 
         SECTION("objects")

tests/src/unit-bson.cpp

@@ -1011,76 +1011,6 @@ TEST_CASE("BSON document size mismatch")
     }
 }
 
-TEST_CASE("BSON nesting does not consume the call stack")
-{
-    // An embedded document or array used to be read by calling back into the
-    // document reader, so the native call stack grew with the nesting depth of
-    // the input (#5104). The open documents are kept on a heap stack now.
-    //
-    // Deeply nested values must not be compared, copied or dumped here: those
-    // operations are still recursive and would reintroduce the crash.
-
-    // a document nested deeply enough to have crashed, built by to_bson so
-    // that every one of its size prefixes is correct
-    const std::size_t depth = 30000;
-    json deep = json::object();
-    json* p = &deep;
-    for (std::size_t i = 0; i < depth; ++i)
-    {
-        (*p)["a"] = json::object();
-        p = &(*p)["a"];
-    }
-    const std::vector<uint8_t> input = json::to_bson(deep);
-
-    SECTION("a well-formed deep document is read through the SAX interface")
-    {
-        SaxCountdown accept_all(1000000);
-        CHECK(json::sax_parse(input, &accept_all, json::input_format_t::bson));
-    }
-
-    SECTION("a well-formed deep document is read into a value")
-    {
-        json j = json::from_bson(input);
-
-        std::size_t measured = 0;
-        const json* q = &j;
-        while (q->is_object() && !q->empty())
-        {
-            q = &q->begin().value();
-            ++measured;
-        }
-        CHECK(measured == depth);
-    }
-
-    SECTION("embedded documents and arrays are still read the same way")
-    {
-        const json values = {{"a", {{"b", {{"c", 1}}}}}};
-        CHECK(json::from_bson(json::to_bson(values)) == values);
-
-        const json array = {{"a", {1, 2, 3}}};
-        CHECK(json::from_bson(json::to_bson(array)) == array);
-
-        const json mixed = {{"a", {json{{"x", 1}}, json{{"y", 2}}}}};
-        CHECK(json::from_bson(json::to_bson(mixed)) == mixed);
-
-        CHECK(json::from_bson(json::to_bson(json::object())) == json::object());
-    }
-
-    SECTION("a size that does not match is still reported per document")
-    {
-        // the embedded document claims one byte too many
-        std::vector<uint8_t> const bad =
-        {
-            0x15, 0x00, 0x00, 0x00, 0x03, 'a', 0x00,
-            0x0D, 0x00, 0x00, 0x00, 0x08, 'b', 0x00, 0x01, 0x00,
-            0x00
-        };
-        json _;
-        CHECK_THROWS_AS(_ = json::from_bson(bad), json::parse_error&);
-        CHECK(json::from_bson(bad, true, false).is_discarded());
-    }
-}
-
 TEST_CASE("BSON numerical data")
 {
     SECTION("number")

tests/src/unit-cbor.cpp

@@ -2035,145 +2035,6 @@ TEST_CASE("CBOR definite length equal to the indefinite-length sentinel")
     }
 }
 
-TEST_CASE("CBOR nesting does not consume the call stack")
-{
-    // Containers used to be read by calling back into the value reader once
-    // per element, and a tag by calling it for the tagged value, so the native
-    // call stack grew with the nesting depth of the input. Each of the three
-    // costs a single byte to encode -- 0x9F, 0x81 and 0xC2 -- so a payload of
-    // repeated bytes crashed the process (#5104). The containers are kept on a
-    // heap stack now, and a tag is read in a loop.
-    //
-    // Deeply nested values must not be compared, copied or dumped here: those
-    // operations are still recursive and would reintroduce the crash.
-    json _;
-
-    SECTION("indefinite-length containers")
-    {
-        const std::vector<uint8_t> input(500000, 0x9F);
-        CHECK_THROWS_WITH_AS(_ = json::from_cbor(input), "[json.exception.parse_error.110] parse error at byte 500001: syntax error while parsing CBOR value: unexpected end of input", json::parse_error&);
-        CHECK(json::from_cbor(input, true, false).is_discarded());
-    }
-
-    SECTION("definite-length containers")
-    {
-        const std::vector<uint8_t> input(500000, 0x81);
-        CHECK_THROWS_WITH_AS(_ = json::from_cbor(input), "[json.exception.parse_error.110] parse error at byte 500001: syntax error while parsing CBOR value: unexpected end of input", json::parse_error&);
-        CHECK(json::from_cbor(input, true, false).is_discarded());
-    }
-
-    SECTION("tags")
-    {
-        // a tag is not a value of its own, so a chain of them used to recurse
-        const std::vector<uint8_t> input(500000, 0xC2);
-        CHECK_THROWS_WITH_AS(_ = json::from_cbor(input, true, true, json::cbor_tag_handler_t::ignore), "[json.exception.parse_error.110] parse error at byte 500001: syntax error while parsing CBOR value: unexpected end of input", json::parse_error&);
-        CHECK(json::from_cbor(input, true, false, json::cbor_tag_handler_t::ignore).is_discarded());
-    }
-
-    SECTION("a well-formed deep value is read through the SAX interface")
-    {
-        std::vector<uint8_t> input(200000, 0x9F);
-        input.insert(input.end(), 200000, 0xFF);
-
-        SaxCountdown accept_all(1000000);
-        CHECK(json::sax_parse(input, &accept_all, json::input_format_t::cbor));
-    }
-
-    SECTION("a well-formed deep value is read into a value")
-    {
-        const std::size_t depth = 10000;
-        std::vector<uint8_t> input(depth, 0x81);
-        input.push_back(0x00);
-
-        json j = json::from_cbor(input);
-
-        std::size_t measured = 0;
-        const json* p = &j;
-        while (p->is_array() && !p->empty())
-        {
-            p = &p->front();
-            ++measured;
-        }
-        CHECK(measured == depth);
-        CHECK(p->is_number());
-    }
-
-    SECTION("containers are still read the same way")
-    {
-        CHECK(json::from_cbor(std::vector<uint8_t>({0x80})) == json::array());
-        CHECK(json::from_cbor(std::vector<uint8_t>({0xA0})) == json::object());
-        CHECK(json::from_cbor(std::vector<uint8_t>({0x9F, 0xFF})) == json::array());
-        CHECK(json::from_cbor(std::vector<uint8_t>({0xBF, 0xFF})) == json::object());
-        CHECK(json::from_cbor(std::vector<uint8_t>({0x9F, 0x01, 0x02, 0xFF})) == json({1, 2}));
-        CHECK(json::from_cbor(std::vector<uint8_t>({0xBF, 0x61, 'a', 0x01, 0xFF})) == json({{"a", 1}}));
-        // definite and indefinite forms nested inside each other
-        CHECK(json::from_cbor(std::vector<uint8_t>({0x9F, 0x82, 0x01, 0x02, 0xA1, 0x61, 'k', 0xBF, 0xFF, 0xFF})) == json({{1, 2}, {{"k", json::object()}}}));
-    }
-
-    SECTION("tagged values are still read the same way")
-    {
-        const auto ignore = json::cbor_tag_handler_t::ignore;
-        CHECK(json::from_cbor(std::vector<uint8_t>({0xC2, 0x01}), true, true, ignore) == json(1));
-        // a chain of tags resolves to the value that follows it
-        CHECK(json::from_cbor(std::vector<uint8_t>({0xC2, 0xC2, 0xC2, 0x01}), true, true, ignore) == json(1));
-        // a tag inside a container, and one in front of a container
-        CHECK(json::from_cbor(std::vector<uint8_t>({0x82, 0xC2, 0x01, 0x02}), true, true, ignore) == json({1, 2}));
-        CHECK(json::from_cbor(std::vector<uint8_t>({0xC2, 0x82, 0x01, 0x02}), true, true, ignore) == json({1, 2}));
-    }
-}
-
-TEST_CASE("CBOR indefinite-length strings do not recurse per chunk")
-{
-    // Reading an indefinite-length string or byte array used to call itself
-    // once per chunk, so a payload of repeated 0x7F (or 0x5F) bytes exhausted
-    // the call stack before any of the input was rejected. The open levels are
-    // counted now, and the levels below prove the reader still reads the same
-    // values and reports the same errors at the same byte offsets.
-    json _;
-
-    SECTION("many open levels are reported, not crashed on")
-    {
-        const std::vector<uint8_t> input(200000, 0x7F);
-        CHECK_THROWS_WITH_AS(_ = json::from_cbor(input), "[json.exception.parse_error.110] parse error at byte 200001: syntax error while parsing CBOR string: unexpected end of input", json::parse_error&);
-        CHECK(json::from_cbor(input, true, false).is_discarded());
-    }
-
-    SECTION("many open levels are reported, not crashed on (binary)")
-    {
-        const std::vector<uint8_t> input(200000, 0x5F);
-        CHECK_THROWS_WITH_AS(_ = json::from_cbor(input), "[json.exception.parse_error.110] parse error at byte 200001: syntax error while parsing CBOR binary: unexpected end of input", json::parse_error&);
-        CHECK(json::from_cbor(input, true, false).is_discarded());
-    }
-
-    SECTION("chunks are still concatenated")
-    {
-        CHECK(json::from_cbor(std::vector<uint8_t>({0x7F, 0xFF})) == json(""));
-        CHECK(json::from_cbor(std::vector<uint8_t>({0x7F, 0x61, 0x61, 0xFF})) == json("a"));
-        // nested indefinite-length strings are concatenated across levels
-        CHECK(json::from_cbor(std::vector<uint8_t>({0x7F, 0x7F, 0x61, 0x61, 0xFF, 0x61, 0x62, 0xFF})) == json("ab"));
-        CHECK(json::from_cbor(std::vector<uint8_t>({0x7F, 0x7F, 0x7F, 0x61, 0x7A, 0xFF, 0xFF, 0xFF})) == json("z"));
-        CHECK(json::from_cbor(std::vector<uint8_t>({0xA1, 0x7F, 0x61, 0x61, 0xFF, 0x01})) == json({{"a", 1}}));
-    }
-
-    SECTION("chunks are still concatenated (binary)")
-    {
-        CHECK(json::from_cbor(std::vector<uint8_t>({0x5F, 0x41, 0x61, 0xFF})) == json::binary({0x61}));
-        CHECK(json::from_cbor(std::vector<uint8_t>({0x5F, 0x5F, 0x41, 0x61, 0xFF, 0x41, 0x62, 0xFF})) == json::binary({0x61, 0x62}));
-    }
-
-    SECTION("a chunk that is not a string is still rejected")
-    {
-        CHECK_THROWS_WITH_AS(_ = json::from_cbor(std::vector<uint8_t>({0x7F, 0x7F, 0x00})), "[json.exception.parse_error.113] parse error at byte 3: syntax error while parsing CBOR string: expected length specification (0x60-0x7B) or indefinite string type (0x7F); last byte: 0x00", json::parse_error&);
-        CHECK_THROWS_WITH_AS(_ = json::from_cbor(std::vector<uint8_t>({0x5F, 0x5F, 0x00})), "[json.exception.parse_error.113] parse error at byte 3: syntax error while parsing CBOR binary: expected length specification (0x40-0x5B) or indefinite binary array type (0x5F); last byte: 0x00", json::parse_error&);
-    }
-
-    SECTION("a break marker outside an indefinite-length string is not a string")
-    {
-        // 0xFF only closes a string that was opened; on its own it is not one
-        CHECK_THROWS_WITH_AS(_ = json::from_cbor(std::vector<uint8_t>({0xA1, 0xFF, 0x01})), "[json.exception.parse_error.113] parse error at byte 2: syntax error while parsing CBOR string: expected length specification (0x60-0x7B) or indefinite string type (0x7F); last byte: 0xFF", json::parse_error&);
-    }
-}
-
 TEST_CASE("CBOR roundtrips" * doctest::skip())
 {
     SECTION("input from flynn")

tests/src/unit-diagnostics.cpp

@@ -273,5 +273,36 @@ TEST_CASE("Regression tests for extended diagnostics")
         CHECK(j1["numbers"]["two"] == 2);
         CHECK(j1["string"] == "t");
     }
+
+    SECTION("Regression test - swap(array_t&)/swap(object_t&) must update JSON_DIAGNOSTICS parent pointers")
+    {
+        // swap(array_t&)
+        {
+            json j = json::array();
+            json::array_t arr = {json::array({1})};
+            j.swap(arr);
+
+            // parent pointers of the moved-in elements must point into j, not
+            // into the now-defunct free-standing array_t
+            CHECK_THROWS_WITH_AS(j[0][0].get<std::string>(), "[json.exception.type_error.302] (/0/0) type must be string, but is number", json::type_error);
+
+            // must not trigger assert_invariant() in a debug/assert-enabled build
+            json const k = j;
+            CHECK(k == j);
+        }
+
+        // swap(object_t&)
+        {
+            json o = json::object();
+            json::object_t obj = {{"a", json::array({1})}};
+            o.swap(obj);
+
+            CHECK_THROWS_WITH_AS(o["a"][0].get<std::string>(), "[json.exception.type_error.302] (/a/0) type must be string, but is number", json::type_error);
+
+            // must not trigger assert_invariant() in a debug/assert-enabled build
+            json const p = o;
+            CHECK(p == o);
+        }
+    }
 }
 

tests/src/unit-msgpack.cpp

@@ -1598,67 +1598,6 @@ TEST_CASE("MessagePack")
 }
 
 // use this testcase outside [hide] to run it with Valgrind
-TEST_CASE("MessagePack nesting does not consume the call stack")
-{
-    // Reading a container used to call back into the value reader once per
-    // element, so the native call stack grew with the nesting depth of the
-    // input: one frame per byte for repeated 0x91 (a one-element array), which
-    // crashes the process long before the input is exhausted (#5104). The
-    // containers are kept on a heap stack now.
-    //
-    // Note that deeply nested values must not be compared, copied or dumped
-    // here: those operations are still recursive, and would reintroduce the
-    // very crash this checks for. Depth is measured by descending instead.
-
-    SECTION("an unterminated chain is reported, not crashed on")
-    {
-        json _;
-        const std::vector<uint8_t> input(300000, 0x91);
-        CHECK_THROWS_WITH_AS(_ = json::from_msgpack(input), "[json.exception.parse_error.110] parse error at byte 300001: syntax error while parsing MessagePack value: unexpected end of input", json::parse_error&);
-        CHECK(json::from_msgpack(input, true, false).is_discarded());
-    }
-
-    SECTION("a well-formed deep value is read through the SAX interface")
-    {
-        std::vector<uint8_t> input(300000, 0x91);
-        input.push_back(0x01); // innermost value
-
-        SaxCountdown accept_all(600001);
-        CHECK(json::sax_parse(input, &accept_all, json::input_format_t::msgpack));
-    }
-
-    SECTION("a well-formed deep value is read into a value")
-    {
-        const std::size_t depth = 10000;
-        std::vector<uint8_t> input(depth, 0x91);
-        input.push_back(0x01);
-
-        json j = json::from_msgpack(input);
-
-        std::size_t measured = 0;
-        const json* p = &j;
-        while (p->is_array() && !p->empty())
-        {
-            p = &p->front();
-            ++measured;
-        }
-        CHECK(measured == depth);
-        CHECK(p->is_number());
-    }
-
-    SECTION("containers are still read the same way")
-    {
-        CHECK(json::from_msgpack(std::vector<uint8_t>({0x90})) == json::array());
-        CHECK(json::from_msgpack(std::vector<uint8_t>({0x80})) == json::object());
-        CHECK(json::from_msgpack(std::vector<uint8_t>({0x92, 0x90, 0x80})) == json({json::array(), json::object()}));
-        CHECK(json::from_msgpack(std::vector<uint8_t>({0x91, 0x91, 0x91, 0x90})) == json({{{json::array()}}}));
-        CHECK(json::from_msgpack(std::vector<uint8_t>({0x81, 0xA1, 'a', 0x81, 0xA1, 'b', 0x92, 0x01, 0x02})) == json({{"a", {{"b", {1, 2}}}}}));
-        // array 16 and map 32, i.e. the counted forms
-        CHECK(json::from_msgpack(std::vector<uint8_t>({0xDC, 0x00, 0x02, 0x01, 0x02})) == json({1, 2}));
-        CHECK(json::from_msgpack(std::vector<uint8_t>({0xDF, 0x00, 0x00, 0x00, 0x01, 0xA1, 'k', 0xC3})) == json({{"k", true}}));
-    }
-}
-
 TEST_CASE("single MessagePack roundtrip")
 {
     SECTION("sample.json")

tests/src/unit-ordered_json.cpp

@@ -81,3 +81,84 @@ TEST_CASE("regression test for issue #3732 - iteration_proxy_value<iter_impl<ord
     };
     static_cast<void>(fn);
 }
+
+TEST_CASE("regression test - diff() must account for ordered_json member order")
+{
+    SECTION("pure reorder, no value changes")
+    {
+        ordered_json a = {{"a", 1}, {"b", 2}};
+        ordered_json b = {{"b", 2}, {"a", 1}};
+        CHECK(a != b); // order-sensitive equality
+        CHECK(a.patch(ordered_json::diff(a, b)) == b);
+    }
+
+    SECTION("new key must land at the front")
+    {
+        ordered_json c = {{"b", 2}};
+        ordered_json e = {{"a", 1}, {"b", 2}};
+        CHECK(c.patch(ordered_json::diff(c, e)) == e);
+    }
+
+    SECTION("reorder plus a value change on one of the reordered keys")
+    {
+        ordered_json a = {{"a", 1}, {"b", 2}};
+        ordered_json b = {{"b", 20}, {"a", 1}};
+        CHECK(a != b);
+        CHECK(a.patch(ordered_json::diff(a, b)) == b);
+    }
+
+    SECTION("reorder plus a deleted key")
+    {
+        ordered_json a = {{"a", 1}, {"b", 2}, {"c", 3}};
+        ordered_json b = {{"b", 2}, {"a", 1}};
+        CHECK(a != b);
+        CHECK(a.patch(ordered_json::diff(a, b)) == b);
+    }
+
+    SECTION("reorder plus a nested value that itself needs a recursive diff")
+    {
+        ordered_json a = {{"a", {{"x", 1}, {"y", 2}}}, {"b", 2}};
+        ordered_json b = {{"b", 2}, {"a", {{"x", 1}, {"y", 99}}}};
+        CHECK(a != b);
+        CHECK(a.patch(ordered_json::diff(a, b)) == b);
+    }
+
+    SECTION("three or more keys shuffled into a different order")
+    {
+        ordered_json a = {{"a", 1}, {"b", 2}, {"c", 3}, {"d", 4}};
+        ordered_json b = {{"d", 4}, {"b", 2}, {"a", 1}, {"c", 3}};
+        CHECK(a != b);
+        CHECK(a.patch(ordered_json::diff(a, b)) == b);
+    }
+
+    SECTION("matching order still produces a minimal patch (fast path unaffected)")
+    {
+        ordered_json a = {{"a", 1}, {"b", 2}, {"c", 3}};
+        ordered_json b = {{"a", 1}, {"b", 20}, {"c", 3}};
+        auto p = ordered_json::diff(a, b);
+        // only the changed value should be touched, not a wholesale remove+add
+        CHECK(p.size() == 1);
+        CHECK(p[0]["op"] == "replace");
+        CHECK(p[0]["path"] == "/b");
+        CHECK(a.patch(p) == b);
+    }
+
+    SECTION("plain json (std::map-backed) is unaffected by same-key-different-insertion-order")
+    {
+        json a;
+        a["b"] = 2;
+        a["a"] = 1;
+
+        json b;
+        b["a"] = 1;
+        b["b"] = 2;
+
+        // std::map iteration is always sorted by key, so a == b regardless of
+        // insertion order, and diff() must still produce the same minimal
+        // (empty) result as before this fix
+        CHECK(a == b);
+        auto p = json::diff(a, b);
+        CHECK(p.empty());
+        CHECK(a.patch(p) == b);
+    }
+}

tests/src/unit-ubjson.cpp

@@ -2149,166 +2149,6 @@ TEST_CASE("UBJSON")
     }
 }
 
-TEST_CASE("UBJSON nesting does not consume the call stack")
-{
-    // Containers used to be read by calling back into the value reader once
-    // per element, so the native call stack grew with the nesting depth of the
-    // input. '[' alone opens a container, so a payload of repeated '[' crashed
-    // the process (#5104), as did the optimized forms, which reach the same
-    // path through a type or size annotation. The containers are kept on a
-    // heap stack now.
-    //
-    // Deeply nested values must not be compared, copied or dumped here: those
-    // operations are still recursive and would reintroduce the crash.
-    json _;
-
-    SECTION("containers that end at a marker")
-    {
-        const std::vector<uint8_t> input(500000, '[');
-        CHECK_THROWS_WITH_AS(_ = json::from_ubjson(input), "[json.exception.parse_error.110] parse error at byte 500001: syntax error while parsing UBJSON value: unexpected end of input", json::parse_error&);
-        CHECK(json::from_ubjson(input, true, false).is_discarded());
-    }
-
-    SECTION("containers with a size")
-    {
-        std::vector<uint8_t> input;
-        for (std::size_t i = 0; i < 100000; ++i)
-        {
-            input.push_back('[');
-            input.push_back('#');
-            input.push_back('i');
-            input.push_back(1);
-        }
-        CHECK_THROWS_AS(_ = json::from_ubjson(input), json::parse_error&);
-        CHECK(json::from_ubjson(input, true, false).is_discarded());
-    }
-
-    SECTION("containers with a type and a size")
-    {
-        // '[' is a permitted optimized type in UBJSON, so each element of such
-        // a container is itself a container, read without a marker of its own
-        std::vector<uint8_t> input;
-        for (std::size_t i = 0; i < 100000; ++i)
-        {
-            const std::vector<uint8_t> level = {'[', '$', '[', '#', 'i', 1};
-            input.insert(input.end(), level.begin(), level.end());
-        }
-        CHECK_THROWS_AS(_ = json::from_ubjson(input), json::parse_error&);
-        CHECK(json::from_ubjson(input, true, false).is_discarded());
-    }
-
-    SECTION("a well-formed deep value is read through the SAX interface")
-    {
-        std::vector<uint8_t> input(100000, '[');
-        input.insert(input.end(), 100000, ']');
-
-        SaxCountdown accept_all(1000000);
-        CHECK(json::sax_parse(input, &accept_all, json::input_format_t::ubjson));
-    }
-
-    SECTION("a well-formed deep value is read into a value")
-    {
-        const std::size_t depth = 10000;
-        std::vector<uint8_t> input(depth, '[');
-        input.insert(input.end(), depth, ']');
-
-        json j = json::from_ubjson(input);
-
-        std::size_t measured = 0;
-        const json* p = &j;
-        while (p->is_array() && !p->empty())
-        {
-            p = &p->front();
-            ++measured;
-        }
-        // the innermost array is empty, so the descent stops one level short
-        CHECK(measured == depth - 1);
-    }
-
-    SECTION("containers are still read the same way")
-    {
-        CHECK(json::from_ubjson(std::vector<uint8_t>({'[', ']'})) == json::array());
-        CHECK(json::from_ubjson(std::vector<uint8_t>({'{', '}'})) == json::object());
-        CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '#', 'i', 0})) == json::array());
-        CHECK(json::from_ubjson(std::vector<uint8_t>({'{', '#', 'i', 0})) == json::object());
-        CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '$', 'i', '#', 'i', 2, 1, 2})) == json({1, 2}));
-        CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '#', 'i', 2, 'i', 1, 'i', 2})) == json({1, 2}));
-        CHECK(json::from_ubjson(std::vector<uint8_t>({'{', '$', 'i', '#', 'i', 1, 'i', 1, 'a', 1})) == json({{"a", 1}}));
-        // a no-op is not a value, so a container of them holds none
-        CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '$', 'N', '#', 'i', 2})) == json::array());
-        // sized and unsized forms nested inside one another
-        CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '[', '#', 'i', 2, 'i', 1, 'i', 2, ']'})) == json({{1, 2}}));
-        CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '#', 'i', 1, '[', 'i', 1, ']'})) == json({{1}}));
-        // an optimized container of containers
-        CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '$', '[', '#', 'i', 2, 'i', 1, ']', 'i', 2, ']'})) == json({{1}, {2}}));
-    }
-
-    SECTION("BJData containers are still read the same way")
-    {
-        // the ND-array wrapper and the binary shortcut are complete values,
-        // not containers the reader descends into
-        CHECK(json::from_bjdata(std::vector<uint8_t>({'[', '$', 'U', '#', '[', '$', 'i', '#', 'i', 2, 2, 3, 1, 2, 3, 4, 5, 6})) ==
-        json({{"_ArrayType_", "uint8"}, {"_ArraySize_", {2, 3}}, {"_ArrayData_", {1, 2, 3, 4, 5, 6}}}));
-        CHECK(json::from_bjdata(std::vector<uint8_t>({'[', '$', 'i', '#', 'i', 2, 1, 2})) == json({1, 2}));
-        CHECK(json::from_bjdata(std::vector<uint8_t>({'[', '[', 'i', 1, ']', ']'})) == json({{1}}));
-    }
-}
-
-TEST_CASE("UBJSON optimized arrays of a valueless type are bounded")
-{
-    // An element of type 'Z', 'T' or 'F' is encoded by its marker alone, so an
-    // optimized array of one of those has no payload and the declared count is
-    // the only thing deciding how much is allocated. Ten bytes used to produce
-    // billions of values (#2793); every other type costs at least one byte per
-    // element and is bounded by the end of the input.
-    json _;
-
-    SECTION("an excessive count is rejected")
-    {
-        // 'l' is a big-endian int32: 0x7FFFFFFF elements, about 34 GB of value
-        for (const auto marker :
-                {'Z', 'T', 'F'
-                })
-        {
-            const std::vector<uint8_t> input = {'[', '$', static_cast<uint8_t>(marker), '#', 'l', 0x7F, 0xFF, 0xFF, 0xFF};
-            CHECK_THROWS_WITH_AS(_ = json::from_ubjson(input), "[json.exception.out_of_range.408] syntax error while parsing UBJSON size: excessive array size", json::out_of_range&);
-            CHECK(json::from_ubjson(input, true, false).is_discarded());
-        }
-    }
-
-    SECTION("ordinary counts are unaffected")
-    {
-        CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '$', 'Z', '#', 'i', 3})) == json({nullptr, nullptr, nullptr}));
-        CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '$', 'T', '#', 'i', 2})) == json({true, true}));
-        CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '$', 'F', '#', 'i', 2})) == json({false, false}));
-        // 'N' is a no-op rather than a value, and still yields an empty array
-        CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '$', 'N', '#', 'i', 2})) == json::array());
-    }
-
-    SECTION("a type with a payload is unaffected")
-    {
-        // the same count for 'U' is bounded by the end of the input instead
-        const std::vector<uint8_t> input = {'[', '$', 'U', '#', 'l', 0x7F, 0xFF, 0xFF, 0xFF};
-        CHECK_THROWS_AS(_ = json::from_ubjson(input), json::parse_error&);
-    }
-
-    SECTION("the writer stays within what the reader accepts")
-    {
-        // below the limit the optimized form is used and is tiny; above it the
-        // writer falls back so that the result can still be read back
-        json const at_limit(1048576, nullptr);
-        const auto v_at_limit = json::to_ubjson(at_limit, true, true);
-        CHECK(v_at_limit.size() == 9);
-        CHECK(v_at_limit.at(1) == '$');
-        CHECK(json::from_ubjson(v_at_limit) == at_limit);
-
-        json const above_limit(1048577, nullptr);
-        const auto v_above_limit = json::to_ubjson(above_limit, true, true);
-        CHECK(v_above_limit.at(1) != '$');
-        CHECK(json::from_ubjson(v_above_limit) == above_limit);
-    }
-}
-
 TEST_CASE("Universal Binary JSON Specification Examples 1")
 {
     SECTION("Null Value")