4e99a3d650
Update manpages and auto-completion
2021-02-14 11:44:20 +01:00
0ce05d5725
Merge pull request #3236 from Wouter0100/patch-1
...
doc: Note only path-style URL support for S3
2021-01-31 18:44:58 +01:00
0aed8d47d7
docs: Fix typo in S3 URL support
2021-01-31 18:33:15 +01:00
8442c43209
doc: Update wording for S3 path-only requirement
2021-01-31 15:10:03 +01:00
6bd8a2faaa
backup: Add --ignore-ctime option and document change detection
2021-01-28 23:42:10 +01:00
58c7f4694d
Update threat model
2021-01-28 14:20:42 +01:00
b5972f184c
doc: Note only path-style URL support for S3
...
This adds a node to mention that currently only path-style URL's are supported for S3, as per code at:
- https://github.com/restic/restic/blob/aa0faa8c7d7800b6ba7b11164fa2d3683f7f78aa/internal/backend/s3/config.go#L42-L45
- https://github.com/restic/restic/blob/aa0faa8c7d7800b6ba7b11164fa2d3683f7f78aa/internal/backend/s3/config.go#L48-L62
2021-01-23 16:54:08 +01:00
25f4acdaa8
Add changelog entry
2020-12-29 16:32:18 +01:00
05a987b07c
Support values less than 1 for RESTIC_PROGRESS_FPS
...
For example set the variable to 0.016666 to print the progress once per
minute.
2020-12-29 16:32:18 +01:00
684600cf42
ui: update status for the backup command on non-interactive terminals
...
Allow the backup command to print status on non-interactive terminals.
The output is disabled by setting a MinUpdatePause == 0.
2020-12-29 16:03:43 +01:00
c2ef049f1b
ui/progress: don't print progress on non-interactive terminals
...
This reverts to the old behavior of not printing progress updates on
non-interactive terminals. It was accidentally changed in #3058 .
2020-12-29 16:03:43 +01:00
c661518df9
Merge pull request #2793 from greatroar/rclone-doc
...
Clarify rclone-over-SSH docs
2020-12-29 10:46:34 +01:00
da9053b184
Some gramma fixes in documentation
2020-12-19 01:16:15 +03:00
ef1aeb8724
dump: Update docs and changelog
2020-12-19 01:09:47 +03:00
1cdd38d9e0
Merge pull request #3165 from restic/2747-doc-forget
...
doc: Clarify calendar boundaries for --keep-* options
2020-12-16 08:38:03 +01:00
b3c0d2f45b
doc: Clarify calendar boundaries for --keep-* options
2020-12-15 12:43:06 +01:00
1d69341e88
swift: Add support for id based keystone v3 auth parameters
...
This adds support for the following environment variables, which were
previously missing:
OS_USER_ID User ID for keystone v3 authentication
OS_USER_DOMAIN_ID User domain ID for keystone v3 authentication
OS_PROJECT_DOMAIN_ID Project domain ID for keystone v3 authentication
OS_TRUST_ID Trust ID for keystone v3 authentication
2020-12-11 19:22:34 +01:00
61460dee52
doc: Fix misc missing/incorrect text in manual
2020-11-29 18:59:24 +01:00
52b98f7f95
Merge pull request #3017 from greatroar/files-from0
...
Add backup options --files-from-verbatim and --files-from-raw
2020-11-29 18:15:21 +01:00
f70b10d0ee
doc: Emphasize double transfer and duplication in copy command
2020-11-28 19:49:34 +01:00
55bf76ba0c
backup: Add --files-from-{verbatim,raw} options
2020-11-28 18:22:31 +01:00
c23b1a4cba
Update 04_backup.rst
...
Fixed typo - _files_ are included from _folders_, not other _files_.
2020-11-20 07:52:23 +01:00
1b6e8c888f
Merge pull request #3102 from tofran/remove-rclone-drive-use-tras-default-param
...
Remove `--drive-use-trash=false` from rclone param
2020-11-17 11:21:20 +01:00
8f9cea8cc0
Check data subset: check random percentage subset
2020-11-15 18:13:50 +01:00
e74110a833
docs: Write new entry to changelog/unreleased
2020-11-14 15:48:56 +00:00
94a154c7ca
Remove --drive-use-trash=false from rclone param
...
Google drive trash retention policy changed making this
no longer a good default
a go
Issue #3095
2020-11-13 22:58:48 +00:00
3e0456d88b
Highlight that s3.list-objects-v1 is a temporary
2020-11-11 20:11:35 +01:00
f013662e3f
Remove separate section on Ceph, and move s3.list-objects-v1 note to S3 section
2020-11-11 15:11:14 +01:00
354b7e89cc
Document the extended s3.list-objects-v1 flag in a new Ceph section
2020-11-11 12:32:46 +01:00
fd33030556
Use in-memory index to rebuild index in prune
2020-11-06 20:23:30 +01:00
86b5d8ffaa
s3: add bucket-lookup parameter to select path or dns style bucket lookup
...
This is to enable restic working with Alibaba cloud
Fixes #2528
2020-11-05 12:20:10 +01:00
5144141321
Merge pull request #2718 from aawsome/new-cleanup-command
...
Reimplementation of prune
2020-11-05 10:12:19 +01:00
c5300a2c56
Update manpages and auto-completion
2020-11-05 09:41:35 +01:00
c1a3de4a6e
Refactor max-unused calculation, add unlimited option
...
Add a callback to the PruneOptions struct which calculates the number of
bytes allowed to be unused after prune is done. This way, the logic is
closer to the option parsing code.
Also, add an explicit option `unlimited` for the use case when storage
does not matter but bandwidth and time do. Internally, this sets the
maximum number of unused bytes to MaxUint64.
Rework the documentation slightly so that no more "packs" are
mentioned and it talks about "files" instead.
Make it clear in the documentation that the percentage given to
`--max-unused` is relative to the whole repository size after pruning is
done. If specified, it must be below 100%, otherwise the repository
would contain 100% of unused data, which is pointless.
I had a hard time coming up with the correct formula to calculate the
maximum number of unused bytes based on the number of used bytes. For a
fraction `p` (0 ≤ p < 1), a repo with `u` bytes used, and the number of
unused bytes `x` the following holds:
x ≤ p * (u+x)
⇔ x ≤ p*u + p*x
⇔ x - p*x ≤ p*u
⇔ x * (1-p) ≤ p*u
⇔ x ≤ p/(1-p) * u
2020-11-03 16:42:21 +01:00
7f9a0a5907
Reimplementation of prune
2020-11-03 16:42:21 +01:00
e8b4d8d8bc
Merge pull request #2998 from greatroar/env-docs
...
Systematize documentation of environment variables
2020-10-24 22:49:31 +02:00
31b8d7a639
Merge pull request #2274 from fgma/master
...
Support for Volume Shadow Copy Service (VSS) on windows
2020-10-24 15:43:34 +02:00
5695f9ebd2
vss: Implement VSS support for Windows
...
The VSS support works for 32 and 64-bit windows, this includes a check that
the restic version matches the OS architecture as required by VSS. The backup
operation will fail the user has not sufficient permissions to use VSS.
Snapshotting volumes also covers mountpoints but skips UNC paths.
2020-10-24 11:35:57 +02:00
8091151638
doc: Update restic mount availability and requirements
...
NetBSD doesn't support restic mount either, so it's easier to list the
positive cases. Also noted that FUSE for macOS is required on the Mac.
2020-10-22 09:57:30 +02:00
ae179ee63e
Systematize documentation of environment variables
...
Cache locations were documented inconsistently in three places.
The backup docs mentioned PATH being used to find fusermount, which is
never run by restic backup. It now mentions ssh and rclone, which are
used by backends.
The notion of a "system-wide" environment variable makes no sense.
TMPDIR is now mentioned because it allows for optimization and may
have security implications.
2020-10-22 09:57:30 +02:00
f500b0d90e
doc: Add restic install instructions for Alpine Linux
2020-10-11 18:31:07 +02:00
2f3eeff2e7
Merge pull request #2964 from MichaelEischer/fix-repro-instructions
...
Fix instructions to reproduce the release binaries
2020-10-09 21:28:24 +02:00
af4100e07d
Replace repo/repos with repository/repositories in --no-lock help text
2020-10-06 22:49:48 +02:00
187518a8a3
docs: Properly reproduce zip archives for windows binaries
2020-10-05 18:24:46 +02:00
a232c833dc
docs: Update binary reproduction instructions and refer to older instructions
2020-10-05 18:24:46 +02:00
b9b82d878d
Add FAQ on whether restic can resume backups
...
This new FAQ entry explains that restic can resume interrupted backups.
2020-10-03 21:39:45 +02:00
7b50a65492
Update backup help output in documentation
2020-10-01 00:50:27 +02:00
c18b119a9b
Document new option --repository-file
2020-10-01 00:50:27 +02:00
97f7855de3
Add new option --repository-file (default: $RESTIC_REPOSITORY_FILE)
...
As an alternative to -r, this allows to read the repository URL
from a file in order to prevent certain types of information leaks,
especially for URLs containing credentials.
Fixes #1458 , fixes #2900 .
2020-10-01 00:50:26 +02:00
fd02407863
Merge pull request #2849 from classmarkets/gcs-access-token
...
gs: support authentication with access token
2020-09-30 17:42:56 +02:00
Alexander Neumann
MichaelEischer
Wouter van Os
greatroar
Matthew Vance
Alexander Neumann
DRON-666
Leo R. Lundgren
greatroar
Johan Bové
rawtaz
fgma
Quentin Lemaire
tofran
Nick Douma
Alexander Weiss
Nick Craig-Wood
Lorenz Bausch
Andreas Oberritter