✅ verify full indentation runs stay intact after resize

Adapted from a regression test in PR #5273: checks that the whole
contiguous run of indent characters at a given nesting level is
present in the dump output, rather than only the total size or a
single spot-checked character.

Signed-off-by: Claude <noreply@anthropic.com>

.github/workflows/ubuntu.yml

@@ -100,7 +100,7 @@ jobs:
     container: ubuntu:focal
     strategy:
       matrix:
-        target: [ci_cmake_flags, ci_test_diagnostics, ci_test_diagnostic_positions, ci_test_noexceptions, ci_test_noimplicitconversions, ci_test_legacycomparison, ci_test_noglobaludls, ci_test_disableenumserialization, ci_test_skiplibraryversioncheck, ci_test_simdutf]
+        target: [ci_cmake_flags, ci_test_diagnostics, ci_test_diagnostic_positions, ci_test_noexceptions, ci_test_noimplicitconversions, ci_test_legacycomparison, ci_test_noglobaludls, ci_test_simdutf]
     steps:
       - name: Install build-essential
         run: apt-get update ; apt-get install -y build-essential unzip wget git libssl-dev

cmake/ci.cmake

@@ -260,40 +260,6 @@ add_custom_target(ci_test_noglobaludls
     COMMENT "Compile and test with global UDLs disabled"
 )
 
-###############################################################################
-# Disable enum serialization.
-###############################################################################
-
-add_custom_target(ci_test_disableenumserialization
-    COMMAND ${CMAKE_COMMAND}
-    -DCMAKE_BUILD_TYPE=Debug -GNinja
-    -DJSON_BuildTests=ON -DJSON_FastTests=ON -DJSON_DisableEnumSerialization=ON
-    -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_disableenumserialization
-    COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_disableenumserialization
-    COMMAND cd ${PROJECT_BINARY_DIR}/build_disableenumserialization && ${CMAKE_CTEST_COMMAND} --parallel ${N} --output-on-failure
-    COMMENT "Compile and test with enum serialization disabled"
-)
-
-###############################################################################
-# Skip the multiple-inclusion library version check.
-###############################################################################
-
-# tests/src/skip_library_version_check.cpp deliberately simulates a scenario
-# (mixing two differently-versioned inclusions of the library in one
-# translation unit) that unavoidably triggers the compiler's own "macro
-# redefined" warning, so -- unlike the ci_test_* targets above -- it is
-# compiled directly here, with a modest warning set, instead of being folded
-# into the library's own -Weverything/-Werror unit test matrix.
-add_custom_target(ci_test_skiplibraryversioncheck
-    COMMAND ${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/skip_library_version_check
-    COMMAND ${CMAKE_CXX_COMPILER} -std=c++11 -Wall -Wextra
-        -I${PROJECT_SOURCE_DIR}/include
-        ${PROJECT_SOURCE_DIR}/tests/src/skip_library_version_check.cpp
-        -o ${PROJECT_BINARY_DIR}/skip_library_version_check/skip_library_version_check
-    COMMAND ${PROJECT_BINARY_DIR}/skip_library_version_check/skip_library_version_check
-    COMMENT "Compile and run a translation unit simulating a mismatched library version, with JSON_SKIP_LIBRARY_VERSION_CHECK defined"
-)
-
 ###############################################################################
 # Coverage.
 ###############################################################################

include/nlohmann/detail/input/binary_reader.hpp

@@ -1434,7 +1434,7 @@ class binary_reader
                 // a copy, not a reference: it must stay valid across the
                 // pop_back() below, which destroys the container_stack element
                 // it would otherwise alias
-                const container_frame top = container_stack.back();
+                container_frame top = container_stack.back();
                 bool at_end = false;
 
                 if (top.remaining != npos)
@@ -2211,7 +2211,7 @@ class binary_reader
             // would otherwise alias.
             for (;;)
             {
-                const container_frame top = container_stack.back();
+                container_frame top = container_stack.back();
 
                 if (top.remaining != npos)
                 {

single_include/nlohmann/json.hpp

@@ -13383,7 +13383,7 @@ class binary_reader
                 // a copy, not a reference: it must stay valid across the
                 // pop_back() below, which destroys the container_stack element
                 // it would otherwise alias
-                const container_frame top = container_stack.back();
+                container_frame top = container_stack.back();
                 bool at_end = false;
 
                 if (top.remaining != npos)
@@ -14160,7 +14160,7 @@ class binary_reader
             // would otherwise alias.
             for (;;)
             {
-                const container_frame top = container_stack.back();
+                container_frame top = container_stack.back();
 
                 if (top.remaining != npos)
                 {

tests/benchmarks/src/benchmarks.cpp

@@ -252,323 +252,4 @@ static void BinaryToCbor(benchmark::State& state)
 }
 BENCHMARK(BinaryToCbor)->RangeMultiplier(2)->Range(8, 8 << 12);
 
-//////////////////////////////////////////////////////////////////////////////
-// parse binary formats
-//////////////////////////////////////////////////////////////////////////////
-
-// Only MessagePack had a read benchmark (FromMsgpack above, left untouched so
-// its numbers stay comparable across releases). The benchmarks below cover the
-// other formats, and read from a contiguous buffer as well as from a FILE*:
-// most callers pass a container, and the two adapters compile to different
-// code. The test data repository ships JSON only, so the input for each is
-// derived at setup time by serializing a parsed test file.
-
-/// binary format to benchmark; the _optimized variants add UBJSON/BJData size
-/// and type annotations, which the readers handle in a separate code path
-enum class binary_format
-{
-    cbor,
-    msgpack,
-    ubjson,
-    ubjson_optimized,
-    bjdata,
-    bjdata_optimized,
-    bson
-};
-
-static std::vector<std::uint8_t> to_binary(const json& j, const binary_format format)
-{
-    switch (format)
-    {
-        case binary_format::cbor:
-            return json::to_cbor(j);
-        case binary_format::msgpack:
-            return json::to_msgpack(j);
-        case binary_format::ubjson:
-            return json::to_ubjson(j);
-        case binary_format::ubjson_optimized:
-            return json::to_ubjson(j, true, true);
-        case binary_format::bjdata:
-            return json::to_bjdata(j);
-        case binary_format::bjdata_optimized:
-            return json::to_bjdata(j, true, true);
-        case binary_format::bson:
-        default:
-            return json::to_bson(j);
-    }
-}
-
-static json from_binary(const std::vector<std::uint8_t>& bytes, const binary_format format)
-{
-    switch (format)
-    {
-        case binary_format::cbor:
-            return json::from_cbor(bytes);
-        case binary_format::msgpack:
-            return json::from_msgpack(bytes);
-        case binary_format::ubjson:
-        case binary_format::ubjson_optimized:
-            return json::from_ubjson(bytes);
-        case binary_format::bjdata:
-        case binary_format::bjdata_optimized:
-            return json::from_bjdata(bytes);
-        case binary_format::bson:
-        default:
-            return json::from_bson(bytes);
-    }
-}
-
-static json from_binary(std::FILE* file, const binary_format format)
-{
-    switch (format)
-    {
-        case binary_format::cbor:
-            return json::from_cbor(file);
-        case binary_format::msgpack:
-            return json::from_msgpack(file);
-        case binary_format::ubjson:
-        case binary_format::ubjson_optimized:
-            return json::from_ubjson(file);
-        case binary_format::bjdata:
-        case binary_format::bjdata_optimized:
-            return json::from_bjdata(file);
-        case binary_format::bson:
-        default:
-            return json::from_bson(file);
-    }
-}
-
-/*!
-@brief serialize a parsed test file to @a format
-
-Returns an empty vector and marks the benchmark as skipped if the file cannot
-be represented in the format, rather than letting the exception escape: BSON
-requires an object at the top level, and several test files are arrays.
-*/
-static std::vector<std::uint8_t> binary_input(benchmark::State& state, const char* filename, const binary_format format)
-{
-    std::ifstream f(filename);
-    std::string const str((std::istreambuf_iterator<char>(f)), std::istreambuf_iterator<char>());
-    const json j = json::parse(str);
-
-    if (format == binary_format::bson && !j.is_object())
-    {
-        state.SkipWithError("BSON requires an object at the top level");
-        return {};
-    }
-
-    return to_binary(j, format);
-}
-
-static void FromBinaryBuffer(benchmark::State& state, const char* filename, const binary_format format)
-{
-    const std::vector<std::uint8_t> bytes = binary_input(state, filename, format);
-    if (bytes.empty())
-    {
-        return;
-    }
-
-    for (auto _ : state)
-    {
-        // the value is destroyed outside the timed section, because destroying
-        // a large DOM is not what this benchmark measures
-        state.PauseTiming();
-        auto* j = new json();
-        state.ResumeTiming();
-
-        *j = from_binary(bytes, format);
-
-        state.PauseTiming();
-        delete j;
-        state.ResumeTiming();
-    }
-
-    state.SetBytesProcessed(state.iterations() * bytes.size());
-}
-
-BENCHMARK_CAPTURE(FromBinaryBuffer, cbor / jeopardy, TEST_DATA_DIRECTORY "/jeopardy/jeopardy.json", binary_format::cbor);
-BENCHMARK_CAPTURE(FromBinaryBuffer, cbor / canada, TEST_DATA_DIRECTORY "/nativejson-benchmark/canada.json", binary_format::cbor);
-BENCHMARK_CAPTURE(FromBinaryBuffer, cbor / citm_catalog, TEST_DATA_DIRECTORY "/nativejson-benchmark/citm_catalog.json", binary_format::cbor);
-BENCHMARK_CAPTURE(FromBinaryBuffer, cbor / twitter, TEST_DATA_DIRECTORY "/nativejson-benchmark/twitter.json", binary_format::cbor);
-BENCHMARK_CAPTURE(FromBinaryBuffer, cbor / floats, TEST_DATA_DIRECTORY "/regression/floats.json", binary_format::cbor);
-BENCHMARK_CAPTURE(FromBinaryBuffer, cbor / signed_ints, TEST_DATA_DIRECTORY "/regression/signed_ints.json", binary_format::cbor);
-BENCHMARK_CAPTURE(FromBinaryBuffer, msgpack / jeopardy, TEST_DATA_DIRECTORY "/jeopardy/jeopardy.json", binary_format::msgpack);
-BENCHMARK_CAPTURE(FromBinaryBuffer, msgpack / canada, TEST_DATA_DIRECTORY "/nativejson-benchmark/canada.json", binary_format::msgpack);
-BENCHMARK_CAPTURE(FromBinaryBuffer, msgpack / citm_catalog, TEST_DATA_DIRECTORY "/nativejson-benchmark/citm_catalog.json", binary_format::msgpack);
-BENCHMARK_CAPTURE(FromBinaryBuffer, msgpack / twitter, TEST_DATA_DIRECTORY "/nativejson-benchmark/twitter.json", binary_format::msgpack);
-BENCHMARK_CAPTURE(FromBinaryBuffer, ubjson / jeopardy, TEST_DATA_DIRECTORY "/jeopardy/jeopardy.json", binary_format::ubjson);
-BENCHMARK_CAPTURE(FromBinaryBuffer, ubjson / canada, TEST_DATA_DIRECTORY "/nativejson-benchmark/canada.json", binary_format::ubjson);
-BENCHMARK_CAPTURE(FromBinaryBuffer, ubjson / citm_catalog, TEST_DATA_DIRECTORY "/nativejson-benchmark/citm_catalog.json", binary_format::ubjson);
-BENCHMARK_CAPTURE(FromBinaryBuffer, ubjson / twitter, TEST_DATA_DIRECTORY "/nativejson-benchmark/twitter.json", binary_format::ubjson);
-BENCHMARK_CAPTURE(FromBinaryBuffer, ubjson_optimized / canada, TEST_DATA_DIRECTORY "/nativejson-benchmark/canada.json", binary_format::ubjson_optimized);
-BENCHMARK_CAPTURE(FromBinaryBuffer, ubjson_optimized / twitter, TEST_DATA_DIRECTORY "/nativejson-benchmark/twitter.json", binary_format::ubjson_optimized);
-BENCHMARK_CAPTURE(FromBinaryBuffer, bjdata / canada, TEST_DATA_DIRECTORY "/nativejson-benchmark/canada.json", binary_format::bjdata);
-BENCHMARK_CAPTURE(FromBinaryBuffer, bjdata / twitter, TEST_DATA_DIRECTORY "/nativejson-benchmark/twitter.json", binary_format::bjdata);
-BENCHMARK_CAPTURE(FromBinaryBuffer, bjdata_optimized / canada, TEST_DATA_DIRECTORY "/nativejson-benchmark/canada.json", binary_format::bjdata_optimized);
-BENCHMARK_CAPTURE(FromBinaryBuffer, bjdata_optimized / twitter, TEST_DATA_DIRECTORY "/nativejson-benchmark/twitter.json", binary_format::bjdata_optimized);
-// BSON requires an object at the top level, so the array-rooted test files
-// (jeopardy and the regression files) cannot be captured here
-BENCHMARK_CAPTURE(FromBinaryBuffer, bson / canada, TEST_DATA_DIRECTORY "/nativejson-benchmark/canada.json", binary_format::bson);
-BENCHMARK_CAPTURE(FromBinaryBuffer, bson / citm_catalog, TEST_DATA_DIRECTORY "/nativejson-benchmark/citm_catalog.json", binary_format::bson);
-BENCHMARK_CAPTURE(FromBinaryBuffer, bson / twitter, TEST_DATA_DIRECTORY "/nativejson-benchmark/twitter.json", binary_format::bson);
-
-static void FromBinaryFile(benchmark::State& state, const char* filename, const binary_format format)
-{
-    const std::vector<std::uint8_t> bytes = binary_input(state, filename, format);
-    if (bytes.empty())
-    {
-        return;
-    }
-
-    const char* tmp = "benchmark_input.bin";
-    std::ofstream o(tmp, std::ios::binary);
-    o.write(reinterpret_cast<const char*>(bytes.data()), static_cast<std::streamsize>(bytes.size()));
-    o.flush();
-    o.close();
-
-    for (auto _ : state)
-    {
-        state.PauseTiming();
-        auto* j = new json();
-        auto* file = std::fopen(tmp, "rb");
-        state.ResumeTiming();
-
-        *j = from_binary(file, format);
-
-        state.PauseTiming();
-        std::fclose(file);
-        delete j;
-        state.ResumeTiming();
-    }
-
-    state.SetBytesProcessed(state.iterations() * bytes.size());
-}
-
-BENCHMARK_CAPTURE(FromBinaryFile, cbor / canada, TEST_DATA_DIRECTORY "/nativejson-benchmark/canada.json", binary_format::cbor);
-BENCHMARK_CAPTURE(FromBinaryFile, cbor / twitter, TEST_DATA_DIRECTORY "/nativejson-benchmark/twitter.json", binary_format::cbor);
-BENCHMARK_CAPTURE(FromBinaryFile, ubjson / canada, TEST_DATA_DIRECTORY "/nativejson-benchmark/canada.json", binary_format::ubjson);
-BENCHMARK_CAPTURE(FromBinaryFile, ubjson / twitter, TEST_DATA_DIRECTORY "/nativejson-benchmark/twitter.json", binary_format::ubjson);
-BENCHMARK_CAPTURE(FromBinaryFile, bjdata / twitter, TEST_DATA_DIRECTORY "/nativejson-benchmark/twitter.json", binary_format::bjdata);
-BENCHMARK_CAPTURE(FromBinaryFile, bson / twitter, TEST_DATA_DIRECTORY "/nativejson-benchmark/twitter.json", binary_format::bson);
-
-//////////////////////////////////////////////////////////////////////////////
-// parse binary formats: value shapes
-//////////////////////////////////////////////////////////////////////////////
-
-// The test files above are wide and shallow, but the readers' cost is per
-// container, so these cover the shapes that stress the container handling
-// itself. Every shape is wrapped in an object so that BSON, which requires an
-// object at the top level, measures the same value as the other formats.
-
-/// deeply nested arrays: one container per level, no other work
-static json make_nested()
-{
-    json nested = json::array();
-    json* p = &nested;
-    for (std::size_t i = 1; i < 1000; ++i)
-    {
-        p->push_back(json::array());
-        p = &p->operator[](0);
-    }
-
-    json j = json::object();
-    j["data"] = std::move(nested);
-    return j;
-}
-
-/// many sibling containers: maximum container churn, minimum nesting
-static json make_containers()
-{
-    json data = json::array();
-    for (std::size_t i = 0; i < 100000; ++i)
-    {
-        data.push_back(json::array({1, 2}));
-    }
-
-    json j = json::object();
-    j["data"] = std::move(data);
-    return j;
-}
-
-/// one flat array of numbers: the scalar decoding path, which must not move
-static json make_scalars()
-{
-    json data = json::array();
-    for (std::size_t i = 0; i < 1000000; ++i)
-    {
-        data.push_back(i);
-    }
-
-    json j = json::object();
-    j["data"] = std::move(data);
-    return j;
-}
-
-static void FromBinaryShape(benchmark::State& state, json (*build)(), const binary_format format)
-{
-    const std::vector<std::uint8_t> bytes = to_binary(build(), format);
-
-    for (auto _ : state)
-    {
-        state.PauseTiming();
-        auto* j = new json();
-        state.ResumeTiming();
-
-        *j = from_binary(bytes, format);
-
-        state.PauseTiming();
-        delete j;
-        state.ResumeTiming();
-    }
-
-    state.SetBytesProcessed(state.iterations() * bytes.size());
-}
-
-BENCHMARK_CAPTURE(FromBinaryShape, nested / cbor, make_nested, binary_format::cbor);
-BENCHMARK_CAPTURE(FromBinaryShape, nested / msgpack, make_nested, binary_format::msgpack);
-BENCHMARK_CAPTURE(FromBinaryShape, nested / ubjson, make_nested, binary_format::ubjson);
-BENCHMARK_CAPTURE(FromBinaryShape, nested / bjdata, make_nested, binary_format::bjdata);
-BENCHMARK_CAPTURE(FromBinaryShape, nested / bson, make_nested, binary_format::bson);
-BENCHMARK_CAPTURE(FromBinaryShape, containers / cbor, make_containers, binary_format::cbor);
-BENCHMARK_CAPTURE(FromBinaryShape, containers / msgpack, make_containers, binary_format::msgpack);
-BENCHMARK_CAPTURE(FromBinaryShape, containers / ubjson, make_containers, binary_format::ubjson);
-BENCHMARK_CAPTURE(FromBinaryShape, containers / ubjson_optimized, make_containers, binary_format::ubjson_optimized);
-BENCHMARK_CAPTURE(FromBinaryShape, containers / bjdata, make_containers, binary_format::bjdata);
-BENCHMARK_CAPTURE(FromBinaryShape, containers / bson, make_containers, binary_format::bson);
-// BSON names every array element, so a large array measures key generation
-// rather than scalar decoding and is left out here
-BENCHMARK_CAPTURE(FromBinaryShape, scalars / cbor, make_scalars, binary_format::cbor);
-BENCHMARK_CAPTURE(FromBinaryShape, scalars / msgpack, make_scalars, binary_format::msgpack);
-BENCHMARK_CAPTURE(FromBinaryShape, scalars / ubjson, make_scalars, binary_format::ubjson);
-BENCHMARK_CAPTURE(FromBinaryShape, scalars / bjdata, make_scalars, binary_format::bjdata);
-
-/*!
-@brief parse an indefinite-length CBOR string
-
-The writer never emits this form, so the input is assembled by hand: 0x7F
-opens the string, each chunk is a one-character string, and 0xFF closes it.
-*/
-static void FromCborChunkedString(benchmark::State& state, const std::size_t chunks)
-{
-    std::vector<std::uint8_t> bytes;
-    bytes.reserve(2 * chunks + 2);
-    bytes.push_back(0x7F);
-    for (std::size_t i = 0; i < chunks; ++i)
-    {
-        bytes.push_back(0x61); // string of length 1
-        bytes.push_back(0x61); // 'a'
-    }
-    bytes.push_back(0xFF);
-
-    for (auto _ : state)
-    {
-        json j = json::from_cbor(bytes);
-        benchmark::DoNotOptimize(j);
-    }
-
-    state.SetBytesProcessed(state.iterations() * bytes.size());
-}
-
-BENCHMARK_CAPTURE(FromCborChunkedString, 10000 chunks, 10000);
-
 BENCHMARK_MAIN();

tests/src/skip_library_version_check.cpp

@@ -1,61 +0,0 @@
-//     __ _____ _____ _____
-//  __|  |   __|     |   | |  JSON for Modern C++ (supporting code)
-// |  |  |__   |  |  | | | |  version 3.12.0
-// |_____|_____|_____|_|___|  https://github.com/nlohmann/json
-//
-// SPDX-FileCopyrightText: 2013-2026 Niels Lohmann <https://nlohmann.me>
-// SPDX-License-Identifier: MIT
-
-// Standalone compile-and-run check for the JSON_SKIP_LIBRARY_VERSION_CHECK
-// configuration macro, which (per #5423) was never exercised anywhere in the
-// test matrix.
-//
-// include/nlohmann/detail/abi_macros.hpp normally emits a #warning if
-// NLOHMANN_JSON_VERSION_MAJOR/MINOR/PATCH are already defined (as they would
-// be by an earlier inclusion of a different version of the library) with
-// values that mismatch the version about to be defined -- unless
-// JSON_SKIP_LIBRARY_VERSION_CHECK is defined, in which case the check (and
-// that #warning) is skipped.
-//
-// This file deliberately is not named tests/src/unit-*.cpp: it is compiled
-// directly (with a modest, non-strict warning set) by the dedicated
-// ci_test_skiplibraryversioncheck target in cmake/ci.cmake, rather than being
-// folded into the library's own -Weverything/-Werror unit test matrix. That
-// is because the scenario simulated here -- mixing two different, already
-// differently-versioned inclusions of the library in one translation unit --
-// unavoidably also triggers the *compiler's own* "macro redefined" warning,
-// independent of (and unaffected by) JSON_SKIP_LIBRARY_VERSION_CHECK, which
-// only ever silences the library's own #warning. Building this file under
-// -Weverything -Werror would therefore fail for a reason unrelated to the
-// macro under test.
-#define NLOHMANN_JSON_VERSION_MAJOR 0
-#define NLOHMANN_JSON_VERSION_MINOR 0
-#define NLOHMANN_JSON_VERSION_PATCH 0
-
-#define JSON_SKIP_LIBRARY_VERSION_CHECK 1
-
-#include <nlohmann/json.hpp>
-
-int main()
-{
-    // reaching this point at all already proves that the mismatched,
-    // pre-defined version macros above did not stop compilation -- which is
-    // exactly what JSON_SKIP_LIBRARY_VERSION_CHECK is for. The library must
-    // also still be fully usable.
-    const nlohmann::json j = {{"a", 1}, {"b", {1, 2, 3}}};
-    if (j.dump() != "{\"a\":1,\"b\":[1,2,3]}")
-    {
-        return 1;
-    }
-
-    // include/nlohmann/detail/abi_macros.hpp unconditionally (re)defines the
-    // version macros to the library's real, current version right after the
-    // (here, skipped) mismatch check, regardless of the deliberately wrong
-    // stand-in values defined above.
-    if (NLOHMANN_JSON_VERSION_MAJOR == 0 && NLOHMANN_JSON_VERSION_MINOR == 0 && NLOHMANN_JSON_VERSION_PATCH == 0)
-    {
-        return 1;
-    }
-
-    return 0;
-}

tests/src/unit-byte_container_with_subtype.cpp

@@ -42,39 +42,6 @@ TEST_CASE("byte_container_with_subtype")
         CHECK(container.subtype() == static_cast<subtype_type>(-1));
     }
 
-    SECTION("move semantics")
-    {
-        // the rvalue-reference constructor (without a subtype) must actually move
-        // the passed-in container rather than copy it; comparing the buffer address
-        // before and after is a stronger check than just observing the source is
-        // empty afterward, since a copy-then-clear could also leave it empty
-        {
-            std::vector<std::uint8_t> bytes = {{0xCA, 0xFE, 0xBA, 0xBE}};
-            const auto* const data_ptr = bytes.data();
-
-            nlohmann::byte_container_with_subtype<std::vector<std::uint8_t>> container(std::move(bytes));
-
-            CHECK(container.size() == 4);
-            CHECK(container.data() == data_ptr);
-            CHECK(!container.has_subtype());
-            CHECK(bytes.empty()); // NOLINT(bugprone-use-after-move,clang-analyzer-cplusplus.Move,hicpp-invalid-access-moved)
-        }
-
-        // same check for the rvalue-reference constructor that also takes a subtype
-        {
-            std::vector<std::uint8_t> bytes = {{0xCA, 0xFE, 0xBA, 0xBE}};
-            const auto* const data_ptr = bytes.data();
-
-            nlohmann::byte_container_with_subtype<std::vector<std::uint8_t>> container(std::move(bytes), 42);
-
-            CHECK(container.size() == 4);
-            CHECK(container.data() == data_ptr);
-            CHECK(container.has_subtype());
-            CHECK(container.subtype() == 42);
-            CHECK(bytes.empty()); // NOLINT(bugprone-use-after-move,clang-analyzer-cplusplus.Move,hicpp-invalid-access-moved)
-        }
-    }
-
     SECTION("comparisons")
     {
         std::vector<std::uint8_t> const bytes = {{0xCA, 0xFE, 0xBA, 0xBE}};

tests/src/unit-conversions.cpp

@@ -1792,40 +1792,6 @@ TEST_CASE("std::filesystem::path")
 }
 #endif
 
-// the ADL to_json overload for std::u8string only exists under the same guard
-// as std::filesystem::path support (it is otherwise only reached indirectly,
-// via std::filesystem::path::u8string()) -- mirror both #if conditions from
-// include/nlohmann/detail/conversions/to_json.hpp exactly
-#if JSON_HAS_FILESYSTEM || JSON_HAS_EXPERIMENTAL_FILESYSTEM
-#if defined(__cpp_lib_char8_t)
-TEST_CASE("std::u8string")
-{
-    SECTION("ascii")
-    {
-        const std::u8string s = u8"Path";
-        json const j = s;
-
-        CHECK(j.template get<std::string>() == "Path");
-    }
-
-    SECTION("utf-8")
-    {
-        // use \u universal-character-names (rather than raw \x byte escapes
-        // or literal non-ASCII source bytes) to compose the multi-byte UTF-8
-        // encoding -- MSVC treats \x escapes used that way inside a u8
-        // literal as a nonstandard extension (warning C5321), which some of
-        // our CI configs promote to an error; \u is portable and produces
-        // the exact same encoded bytes without depending on the source
-        // file's encoding
-        const std::u8string s = u8"P\u011B\u0161ina";
-        json const j = s;
-
-        CHECK(j.template get<std::string>() == "P\xc4\x9b\xc5\xa1ina");
-    }
-}
-#endif
-#endif
-
 TEST_CASE("std::optional")
 {
     SECTION("null")

tests/src/unit-inspection.cpp

@@ -245,6 +245,71 @@ TEST_CASE("object inspection")
             CHECK(binary.dump(1024).size() == 2086);
         }
 
+        SECTION("indentation and resize")
+        {
+            SECTION("array")
+            {
+                const auto j_array = json::parse("[[[[[[]]]]]]");
+                // check right size after indentation triggering a resize
+                CHECK(j_array.dump(1024).size() == 25622);
+                // check if right indentation symbol is used
+                CHECK(j_array.dump(1024, '\t')[4096] == '\t');
+                // check resize is large enough
+                CHECK(j_array.dump(10000).size() == 250022);
+            }
+
+            SECTION("object")
+            {
+                const auto j_object = json::parse(R"({"":{"":{"":{"":{"":{}}}}}})");
+                // check right size after indentation triggering a resize
+                CHECK(j_object.dump(1024).size() == 25642);
+                // check if right indentation symbol is used
+                CHECK(j_object.dump(1024, '\t')[4096] == '\t');
+                // check resize is large enough
+                CHECK(j_object.dump(10000).size() == 250042);
+            }
+
+            SECTION("binary")
+            {
+                const auto j_binary = json::binary({1, 2, 3}, 128);
+                // check right size after indentation triggering a resize
+                CHECK(j_binary.dump(1024).size() == 2086);
+                CHECK(j_binary.dump(1024, '\t')[1024] == '\t');
+                // check resize is large enough
+                CHECK(j_binary.dump(10000).size() == 20038);
+            }
+
+            SECTION("full-width run integrity")
+            {
+                // the size/single-index checks above can't catch a corrupted byte
+                // in the middle of an indentation run, so also verify each level's
+                // indentation is an intact, uninterrupted run of the indent character
+                const std::string::size_type width = 1100;
+
+                SECTION("object")
+                {
+                    const json j_object = {{"outer", {{"inner", 1}}}};
+                    const std::string s = j_object.dump(static_cast<int>(width));
+                    CHECK(s.find('\n' + std::string(width, ' ') + "\"outer\"") != std::string::npos);
+                    CHECK(s.find('\n' + std::string(2 * width, ' ') + "\"inner\"") != std::string::npos);
+                }
+
+                SECTION("array")
+                {
+                    const json j_array = json::array({json::array({1})});
+                    const std::string s = j_array.dump(static_cast<int>(width));
+                    CHECK(s.find('\n' + std::string(2 * width, ' ') + '1') != std::string::npos);
+                }
+
+                SECTION("binary")
+                {
+                    const json j_binary = json::binary({1, 2, 3});
+                    const std::string s = j_binary.dump(static_cast<int>(width));
+                    CHECK(s.find('\n' + std::string(width, ' ') + "\"bytes\"") != std::string::npos);
+                }
+            }
+        }
+
         SECTION("dump and floating-point numbers")
         {
             auto s = json(42.23).dump();

tests/src/unit-json_patch.cpp

@@ -672,102 +672,6 @@ TEST_CASE("JSON patch")
         }
     }
 
-    SECTION("patch_inplace")
-    {
-        SECTION("happy path: patch_inplace mirrors patch() on success")
-        {
-            // mirrors "A.5. Replacing a Value" above, but applies the patch with
-            // patch_inplace() to a mutable copy instead of using patch()'s
-            // returned copy
-            json doc = R"(
-                    {
-                        "baz": "qux",
-                        "foo": "bar"
-                    }
-                )"_json;
-
-            json const patch = R"(
-                    [
-                        { "op": "replace", "path": "/baz", "value": "boo" }
-                    ]
-                )"_json;
-
-            json const expected = R"(
-                    {
-                        "baz": "boo",
-                        "foo": "bar"
-                    }
-                )"_json;
-
-            doc.patch_inplace(patch);
-            CHECK(doc == expected);
-        }
-
-        // this test relies on the "test" operation actually throwing so the
-        // partial-application state can be observed right after the throw
-        // point; under JSON_NOEXCEPTION, JSON_THROW() calls std::abort()
-        // instead (there is no C++ exception to throw), and doctest's
-        // CHECK_THROWS_AS() is compiled out to a no-op that never even
-        // invokes the given expression (see doctest's "--no-throw" test
-        // filter, which ci_test_noexceptions passes) -- so patch()/
-        // patch_inplace() would never be called at all and the follow-up
-        // state assertions below would fail against the untouched original
-#if !defined(JSON_NOEXCEPTION)
-        SECTION("distinguishing contract vs patch(): partial application on failure")
-        {
-            // Unlike patch(), which is all-or-nothing because it applies the
-            // patch to an internal copy that is simply discarded when an
-            // exception is thrown (leaving the original untouched no matter
-            // what), patch_inplace() mutates the document it is called on
-            // directly and immediately, operation by operation. So if a JSON
-            // Patch fails partway through, whatever operations already
-            // succeeded remain applied -- the document is left in a partially
-            // patched state. This is empirically verified current behavior,
-            // not just documented intent, and is pinned here as such.
-            json const original = R"(
-                    {
-                        "baz": "qux",
-                        "foo": "bar"
-                    }
-                )"_json;
-
-            // the first operation ("replace") succeeds; the second ("test")
-            // fails because the value at "/baz" no longer (and never did)
-            // equal "not boo"
-            json const patch = R"(
-                    [
-                        { "op": "replace", "path": "/baz", "value": "boo" },
-                        { "op": "test", "path": "/baz", "value": "not boo" }
-                    ]
-                )"_json;
-
-            // patch() never modifies the object it is called on -- it always
-            // operates on (and returns) a separate copy, so the original is
-            // left completely untouched, regardless of success or failure.
-            // copy_for_patch is intentionally a real copy, not a reference
-            // to `original`: the whole point of this check is to catch a
-            // hypothetical future regression where patch() *does* mutate its
-            // receiver. Using a reference here would make the assertion
-            // below compare `original` to itself -- trivially true even if
-            // such a bug existed -- which is exactly what a static analyzer
-            // can't see when it suggests "this copy is never modified, use
-            // a reference instead".
-            json copy_for_patch = original; // NOLINT(performance-unnecessary-copy-initialization)
-            CHECK_THROWS_AS(copy_for_patch.patch(patch), json::other_error&);
-            CHECK(copy_for_patch == original);
-
-            // patch_inplace(), in contrast, already applied the successful
-            // "replace" operation to the document before the "test" operation
-            // threw -- that change is not rolled back
-            json doc = original;
-            CHECK_THROWS_AS(doc.patch_inplace(patch), json::other_error&);
-            CHECK(doc != original);
-            CHECK(doc.at("baz") == "boo");
-            CHECK(doc.at("foo") == "bar");
-        }
-#endif // !defined(JSON_NOEXCEPTION)
-    }
-
     SECTION("errors")
     {
         SECTION("unknown operation")

tests/src/unit-no-mem-leak-on-adl-serialize.cpp

@@ -70,7 +70,7 @@ TEST_CASE("check_for_mem_leak_on_adl_to_json-2")
     }
 }
 
-TEST_CASE("check_for_mem_leak_on_adl_to_json-3")
+TEST_CASE("check_for_mem_leak_on_adl_to_json-2")
 {
     try
     {

tests/src/unit-no_io_and_user_exceptions.cpp

@@ -1,91 +0,0 @@
-//     __ _____ _____ _____
-//  __|  |   __|     |   | |  JSON for Modern C++ (supporting code)
-// |  |  |__   |  |  | | | |  version 3.12.0
-// |_____|_____|_____|_|___|  https://github.com/nlohmann/json
-//
-// SPDX-FileCopyrightText: 2013-2026 Niels Lohmann <https://nlohmann.me>
-// SPDX-License-Identifier: MIT
-
-// This translation unit is a dedicated, small compile-and-run check for two
-// configuration macros that (per #5423) were never exercised anywhere in the
-// test matrix:
-// - JSON_NO_IO, which removes the library's <istream>/<ostream> support
-//   (operator<<, operator>>, and the stream-based overloads of dump()/parse())
-// - the JSON_THROW_USER / JSON_TRY_USER / JSON_CATCH_USER trio, which lets a
-//   user replace the library's internal exception handling
-//
-// Both macros are about excluding/replacing a facility the library would
-// otherwise pull in on its own, and defining one has no bearing on the other,
-// so -- to keep the test matrix small -- they are exercised together in a
-// single dedicated file instead of two.
-//
-// JSON_NO_IO requires this file itself to never rely on <iostream>/<sstream>;
-// only string-based parsing/dumping is used below.
-#define JSON_NO_IO 1
-
-// The user-supplied exception macros below are a *conforming* replacement:
-// they simply forward to the real throw/try/catch keywords (via a counter so
-// the test can assert each macro was actually invoked, not just defined), so
-// every exception-related behavior the library relies on internally --
-// including rethrowing std::out_of_range as json::out_of_range in at() --
-// keeps working exactly as it would with the library's own default macros.
-static int json_throw_user_call_count = 0; // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)
-
-#define JSON_THROW_USER(exception) do { ++json_throw_user_call_count; throw (exception); } while (false) // NOLINT(cppcoreguidelines-macro-usage)
-#define JSON_TRY_USER try // NOLINT(cppcoreguidelines-macro-usage)
-#define JSON_CATCH_USER(exception) catch (exception) // NOLINT(cppcoreguidelines-macro-usage)
-
-#include "doctest_compatibility.h"
-
-#include <nlohmann/json.hpp>
-using json = nlohmann::json;
-
-TEST_CASE("JSON_NO_IO")
-{
-    // everything that does not touch <istream>/<ostream> must keep working:
-    // parsing from and dumping to std::string
-    const json j = json::parse(R"({"a":[1,2,3],"b":true})");
-    CHECK(j.dump() == R"({"a":[1,2,3],"b":true})");
-    CHECK(j.at("a").size() == 3);
-    CHECK(j.at("b").get<bool>() == true);
-}
-
-// this test relies on CHECK_THROWS_AS() actually invoking the guarded
-// expression so json_throw_user_call_count gets bumped and can be observed
-// afterwards; doctest's "--no-throw" test filter (which ci_test_noexceptions
-// passes, together with a global -DJSON_NOEXCEPTION added to CMAKE_CXX_FLAGS
-// for every translation unit in that build, this file included) compiles
-// CHECK_THROWS_AS() out to a no-op that never even invokes the given
-// expression -- so json::parse()/at() below would never be called at all and
-// the call-count assertions would fail even though our JSON_THROW_USER
-// override (which always really throws, regardless of JSON_NOEXCEPTION) would
-// have worked fine on its own
-#if !defined(JSON_NOEXCEPTION)
-TEST_CASE("JSON_THROW_USER, JSON_TRY_USER, JSON_CATCH_USER")
-{
-    json_throw_user_call_count = 0;
-
-    // json::parse() is [[nodiscard]] (JSON_HEDLEY_WARN_UNUSED_RESULT); under
-    // GCC in C++11 mode that expands to __attribute__((warn_unused_result)),
-    // which -- unlike a [[nodiscard]] attribute proper -- GCC does not
-    // consider satisfied by doctest's CHECK_THROWS_AS() wrapping the
-    // expression in a (void) cast, so the discarded return value would still
-    // be flagged under -Werror=unused-result; assign it to discard it instead,
-    // matching the established `json _ = json::parse(...)` pattern used
-    // elsewhere in the test suite (see unit-class_parser.cpp)
-    json _; // NOLINT(readability-identifier-naming)
-
-    // a parse error goes through JSON_THROW directly, i.e., through our
-    // JSON_THROW_USER override
-    CHECK_THROWS_AS(_ = json::parse("this is not JSON"), json::parse_error&);
-    CHECK(json_throw_user_call_count > 0);
-
-    // at() on an out-of-range array index internally catches std::out_of_range
-    // (JSON_TRY_USER/JSON_CATCH_USER) and rethrows it as json::out_of_range
-    // (JSON_THROW_USER again), so this exercises all three macros together
-    const int count_before = json_throw_user_call_count;
-    const json arr = json::array({1, 2, 3});
-    CHECK_THROWS_AS(arr.at(10), json::out_of_range&);
-    CHECK(json_throw_user_call_count > count_before);
-}
-#endif

tests/src/unit-regression3.cpp

@@ -18,14 +18,6 @@
 // for some reason including this after the json header leads to linker errors with VS 2017...
 #include <locale>
 
-// skip tests if JSON_DisableEnumSerialization=ON (#4384): std::byte is a
-// scoped enum, so get<std::byte>() (needed below to get<std::vector<std::byte>>()
-// from a plain JSON array, not just from an already-binary value) relies on
-// enum serialization being enabled
-#if defined(JSON_DISABLE_ENUM_SERIALIZATION) && (JSON_DISABLE_ENUM_SERIALIZATION == 1)
-    #define SKIP_TESTS_FOR_ENUM_SERIALIZATION
-#endif
-
 #define JSON_TESTS_PRIVATE
 #include <nlohmann/json.hpp>
 using json = nlohmann::json;
@@ -473,7 +465,6 @@ TEST_CASE("regression tests 3")
         CHECK((decoded == json_4804::array()));
     }
 
-#ifndef SKIP_TESTS_FOR_ENUM_SERIALIZATION
     SECTION("discussion #4209 - custom BinaryType direct assignment and round-tripping")
     {
         // Test that assigning a custom BinaryType directly creates a binary value, not an array
@@ -507,7 +498,6 @@ TEST_CASE("regression tests 3")
         CHECK(extracted[1] == std::byte{2});
         CHECK(extracted[2] == std::byte{3});
     }
-#endif
 
     SECTION("issue #5046 - implicit conversion of return json to std::optional no longer implicit")
     {

tests/src/unit-serialization.cpp

@@ -469,7 +469,7 @@ TEST_CASE("serialization of strings (bulk fast path)")
     SECTION("invalid UTF-8 handling is unaffected by the fast path")
     {
         const json j = std::string("valid\xff" "more");
-        CHECK_THROWS_WITH_AS(utils::ignore_return_value(j.dump()), "[json.exception.type_error.316] invalid UTF-8 byte at index 5: 0xFF", json::type_error&);
+        CHECK_THROWS_WITH_AS(j.dump(), "[json.exception.type_error.316] invalid UTF-8 byte at index 5: 0xFF", json::type_error&);
         CHECK(j.dump(-1, ' ', false, json::error_handler_t::replace) == "\"valid\xef\xbf\xbd" "more\"");
         CHECK(j.dump(-1, ' ', true, json::error_handler_t::replace) == "\"valid\\ufffdmore\"");
         CHECK(j.dump(-1, ' ', false, json::error_handler_t::ignore) == "\"validmore\"");

tests/src/unit-std-format.cpp

@@ -52,23 +52,6 @@ TEST_CASE("std::formatter<nlohmann::json>")
         CHECK(std::format("{:2}", j) == j.dump(2));
         CHECK(std::format("{:#2}", j) == j.dump(2));
         CHECK(std::format("{:8}", j) == j.dump(8));
-        // multi-digit widths must accumulate every digit, not just the first
-        CHECK(std::format("{:12}", j) == j.dump(12));
-        CHECK(std::format("{:#12}", j) == j.dump(12));
-        CHECK(std::format("{:10}", j) == j.dump(10));
-    }
-
-    SECTION("bare alignment with no fill character defaults to a space indent character")
-    {
-        const json j = {{"foo", 1}, {"bar", {1, 2, 3}}};
-        // without a preceding fill character, the alignment character itself must not
-        // be mistaken for the indent character -- the default space is kept
-        CHECK(std::format("{:<}", j) == j.dump());
-        CHECK(std::format("{:>}", j) == j.dump());
-        CHECK(std::format("{:^}", j) == j.dump());
-        CHECK(std::format("{:<3}", j) == j.dump(3, ' '));
-        CHECK(std::format("{:>3}", j) == j.dump(3, ' '));
-        CHECK(std::format("{:^3}", j) == j.dump(3, ' '));
     }
 
     SECTION("fill-and-align sets the indent character, like dump(indent, indent_char)")