mirror of
https://github.com/nlohmann/json.git
synced 2026-11-17 17:01:30 +00:00
31b51c95db1c7514c32923f4a4cea1444b5e29e7
8
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
253e4c3926 |
Bound what the DOM parsers reserve for arrays that announce a size (#6082)
* Bound the total number of valueless UBJSON elements per input An optimized UBJSON array of type Z, T or F has no payload, so its declared count is not bounded by the input. The limit of 1048576 applied to each array on its own, so 9 bytes (`[$Z#l` and a count) produced 1048576 values and every further 9 bytes another 1048576: 362 bytes allocated 661 MB in a DOM, and a SAX handler received 1M events per 9 bytes. The reader now adds the counts of all such arrays of one input and rejects the input with out_of_range.408 when the sum exceeds 1048576 plus 4 for every byte read so far. The base is the per-array limit, so an array that was accepted on its own before is still accepted at the start of an input. These arrays add about 80 bytes of memory per input byte (measured 77; one `Z` per byte needs 32), plus the base; the memory of a document as a whole is not bounded by this. The check runs once per valueless array, before its start event, with plain size_t arithmetic that cannot overflow for a 32-bit size_t. Containers with a payload type and objects (every member needs a key) are bounded by the input already and are unchanged. BJData rejects these types. to_ubjson counts the elements of the typed arrays it writes in one call and writes an array in the unoptimized form (`[#n Z Z ...`) once it would bring the total above 1048576, which a reader accepts at any input size. The check is made only for a typed array of a valueless type, so BJData and other arrays do not pay for it. Everything to_ubjson writes in version 3.13.0 can therefore be read back. Two consequences: - to_ubjson output changes for values with more than 1048576 elements in arrays of type Z, T or F: such an array is written at one byte per element, e.g. 270000 rows of 100 nulls take 26.8 MB instead of 1.35 MB. - Output of version 3.12.0 and earlier (typed arrays without such a total) is rejected by from_ubjson when the arrays hold more than 1048576 elements plus 4 per byte of input. 3.12.0 writes a row of up to 255 nulls in 5 bytes (6 above 255), so a table is rejected from 1075 rows of 1000 nulls or 209723 rows of 25 (accepted: 1000 rows of 1000, 209000 rows of 25); rows of 20 or fewer are never rejected. Measured on the test data: no file of json_test_data (converted with to_ubjson in all three modes, 846 round trips) holds an array of this kind with more than 0.17 values per byte. All of them are read back. Reproducer (K arrays of 1048576 nulls), Apple clang -O2: K=40 (362 bytes): before 41943040 values, 664 MB; after rejected, 33 MB K=2 (20 bytes): before 2097152 values, 53 MB; after rejected, 33 MB The new tests count events with a SAX handler where they can: building and comparing million-element values made the first version take 176 s under Valgrind, the current one about 22 s. Behaviour change: an input that holds more than 1048576 elements in arrays of type Z, T or F at more than 4 per byte is now rejected. Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Report an empty array for UBJSON `[$N#<n>` instead of n elements A no-op (N) is not a value, so an optimized array of type N holds no element whatever count it declares. The reader skipped the elements but still passed the declared count to the SAX parser: a handler was told start_array(n) and no element followed, and the DOM parser reserved min(n, 16384) values (256 KB) for an array that stays empty. Nine bytes (`[$N#l 0x7FFFFFFF`) therefore committed 256 KB: 2000 of them in one input, 18 KB, committed 512 MB of heap (capacity 163,840,000 values for the 10000 arrays of the original probe: 2.6 GB for 70 KB of input). Untouched pages keep the resident size small, but the commit charge and a 32-bit address space are consumed. The reader now announces 0 elements for an optimized array of type N. The loop that skips the elements is unchanged (it never ran). A count that does not fit into std::size_t is still rejected by the count reader; a count that is too large for the array type of the DOM (before: out_of_range.408 "excessive array size" from the DOM handler) is accepted now, because the array is empty. Behaviour change: sax_parse reports start_array(0) for `[$N#n` (before: n); from_ubjson no longer throws out_of_range.408 for an N-typed array whose count exceeds the maximum size of the array type. Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Bound what the DOM parsers reserve for arrays that announce a size Cause: #5476 made the DOM parsers reserve storage (up to 16384 elements) for a counted array of CBOR, MessagePack, UBJSON and BJData when it opens, before any input backs the count. The arrays that are open at the same time keep their storage until the parse ends, so N nested headers that announce 16384 elements and are never completed hold N * 16384 * sizeof(json): 100,000 nested CBOR headers `99 40 00` (300,000 bytes) peaked at 1.65 GiB, 3.12.0 at 12 MiB; the same for MessagePack `DC 40 00`, UBJSON `[#I 16384` and BJData. Fix: json_sax_dom_error_state, the base of the three DOM parsers, keeps a credit of elements that may still be reserved: 65,536 at the start plus 2 for every byte the reader has read. An array that announces no more than the credit left is reserved as before (one comparison and one subtraction per counted array); a larger one is reserved what is left and grows as its elements arrive. binary_reader tells a DOM parser (a handler whose pointer converts to json_sax_dom_error_state*; a handler that derives from one privately or protectedly, or any other SAX handler, is not told anything and reserves as in the base of this change) where to find its count of characters read for the duration of sax_parse(). An RAII guard puts back the previous binding on every exit, also by exception, so the parser never keeps a pointer to a reader that is gone (unbound, only the per-array cap of 16384 applies); the public SAX interface is unchanged, and start_array() still reports the announced number. A bound per array by the remaining input would not help, since the same bytes would back every open level; the bound has to be over all arrays. The elements of an array take at least one byte of input each, so the credit is more than honest input needs: none of the 19 inputs measured (canada, citm_catalog, twitter, mesh, update-center, random, numbers, animation, ik_rig, instruments, geo_response, jeopardy and 7 synthetic ones, each as CBOR, MessagePack, UBJSON and BJData, with and without size/type optimization) was given less than it announced. A value that nests five or more arrays of 16384 elements, each with an array as its first element, is the exception: the later ones grow as before. Measurements (clang -O2, macOS arm64, peak memory footprint of `/usr/bin/time -l`, reproducer: n nested headers): n = 20,000 n = 100,000 develop fix 3.12.0 develop fix 3.12.0 CBOR 338.7 5.9 8.2 1687.7 23.3 11.8 MiB MessagePack 338.9 6.0 7.3 1687.9 23.8 11.9 MiB UBJSON 339.0 7.6 8.0 1687.9 30.1 11.6 MiB BJData 339.0 7.3 7.9 1688.0 30.8 11.6 MiB That is at most (65,536 + 2 per input byte) values: 1 MiB plus 32 bytes per input byte with 16-byte values (a value is 24 bytes with JSON_DIAGNOSTICS and up to 40 with JSON_DIAGNOSTIC_POSITIONS), as documented in untrusted_input.md. Lower fixed caps do not get there: a cap of 64 elements still peaks at 113 MiB (n = 100,000) and costs 4.7 % on arrays of 300 elements (mat300.cbor) and 5.0 % on arrays of 10,000 (arrays_of_big.cbor). Reader instructions retired (min of 7, 108 rows: 18 inputs in the 6 forms CBOR, MessagePack, UBJSON and BJData plain and optimized; jeopardy, 46 MB, is within 0.1 %), compared with the base of this change: -0.19 % to +0.37 % in the formats that announce sizes (canada.cbor 81.9 M -> 82.1 M, many_small.cbor 333.5 M -> 334.2 M); the benefit of #5476 is kept (without any reserve canada.cbor takes 116.8 M, +42.6 %, many_small.cbor +71.5 %, mat300.cbor +81.6 %). Rows of plain UBJSON and BJData, whose arrays announce no size, move by -2.7 % to +2.6 % without any code of theirs changing: the base alternates between two instruction counts per process (452 M and 463 M for many_pairs.ubjson, equal in cycles), and a struct with three unused members added to the same class reproduces the 474 M mode. Tests (CBOR, MessagePack, UBJSON, BJData): 200 nested headers that announce 16384 elements peak at 52,433,600 bytes of DOM allocations on the base and below 128 Ki values with the fix (scaled by sizeof(value), so that it holds with the diagnostic macros) (counting allocator, no process memory measured); an array that completes is still reserved in one allocation; CBOR also checks that a DOM parser is not bound to a finished parse (ASan: stack-use-after-scope without the guard), that wrappers derived publicly (also with a parse inside the parse), privately and protectedly compile and are bound or not as described, that an array that got less than it announced decodes and that a SAX handler is told the announced size. The new tests take 4.6 s under Valgrind at -O0 (gcc:12, all four files). Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Clarify the reservation note for announced array counts Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Report an empty array for UBJSON [$N#<n>] instead of n elements (#6079) * Report an empty array for UBJSON `[$N#<n>` instead of n elements A no-op (N) is not a value, so an optimized array of type N holds no element whatever count it declares. The reader skipped the elements but still passed the declared count to the SAX parser: a handler was told start_array(n) and no element followed, and the DOM parser reserved min(n, 16384) values (256 KB) for an array that stays empty. Nine bytes (`[$N#l 0x7FFFFFFF`) therefore committed 256 KB: 2000 of them in one input, 18 KB, committed 512 MB of heap (capacity 163,840,000 values for the 10000 arrays of the original probe: 2.6 GB for 70 KB of input). Untouched pages keep the resident size small, but the commit charge and a 32-bit address space are consumed. The reader now announces 0 elements for an optimized array of type N. The loop that skips the elements is unchanged (it never ran). A count that does not fit into std::size_t is still rejected by the count reader; a count that is too large for the array type of the DOM (before: out_of_range.408 "excessive array size" from the DOM handler) is accepted now, because the array is empty. Behaviour change: sax_parse reports start_array(0) for `[$N#n` (before: n); from_ubjson no longer throws out_of_range.408 for an N-typed array whose count exceeds the maximum size of the array type. Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Clarify the reservation note for announced array counts Signed-off-by: Niels Lohmann <mail@nlohmann.me> --------- Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Add JSON_UBJSON_VALUELESS_ELEMENTS_PER_BYTE to set the UBJSON whole-input budget (#6083) * Add JSON_UBJSON_VALUELESS_ELEMENTS_PER_BYTE to set the UBJSON whole-input budget The whole-input budget for the elements of optimized UBJSON arrays of type Z, T and F (1048576 plus 4 per byte read) rejects files written by 3.12.0 that have long arrays of these types, such as 1100 rows of 1000 nulls with a `$Z` annotation, and there was no way to read them. The per-byte rate is now the macro JSON_UBJSON_VALUELESS_ELEMENTS_PER_BYTE. Semantics: - default 4, so the default build is unchanged (the generated code of from_ubjson is identical at -O2 up to source line numbers); - the value must be a positive integer: 0, negative, non-integral, bool, character and wider-than-uintmax_t values fail to compile with a static_assert that names the macro; - a value that does not fit into std::size_t is the largest size_t, so one spelling works for 32- and 64-bit targets; - the limit base + rate * bytes_read saturates at the largest size_t instead of wrapping around, for any rate and input size; a rate of 131072 (2^20 / 8) or more cannot be exceeded by any input (the shortest header of an array of more than 32767 elements is 8 bytes), which switches the whole-input budget off; - the limit of one array (1048576) and the base (1048576) stay fixed constants, so the writer fallback still follows the base only and a reader with any rate reads everything the writer produces; - the macro is not part of the ABI tag and must have the same value in every translation unit; it is documented that way. The memory the arrays can take in a DOM is about 20 bytes per rate and byte of input (measured, macOS, containers of 9 * rate elements: 25 bytes per input byte at rate 1, 81 at 4, 312 at 16, 1226 at 64, 5493 at 256) plus about 33 MB for the base. A 3.12.0 row of N values has a header of b bytes (5 up to 255, 6 up to 32767, 8 above), so a table is read completely if N <= rate * b, and otherwise up to (1048576 + h * rate, h = outer header: 6, 7 or 9 bytes) / (N - rate * b) rows; 1100 rows of 1000 nulls need a rate of 8. The new page of the macro documents the formulas, the measurements, and two examples that are run by the documentation checks. The tests of the budget move to tests/src/unit-ubjson_valueless.cpp, which derives every boundary from the macro and is built with the rates 1, 1000000 and 0xFFFFFFFFFFFFFFFF in addition to the default (the last two check that nothing is refused and that the limit does not wrap around); they fail with the unchanged header for rate 1, 1000000 and the maximum. Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Refuse char8_t for JSON_UBJSON_VALUELESS_ELEMENTS_PER_BYTE and clarify its documentation Signed-off-by: Niels Lohmann <mail@nlohmann.me> --------- Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Use fseek instead of rewind in the UBJSON FILE* test clang-tidy (bugprone-unsafe-functions) rejects rewind() because it has no error detection. Check the result of fseek() instead. Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Charge an announced array only what is reserved for it An array that announced more than reserve_cap() elements but no more than the credit left was charged the announced count, while reserve_array() reserved at most reserve_cap() of them. An outer array of 20000 elements therefore left a third nested array of 16384 with 12796 instead of the full reservation. reserve_count() now caps the count first and charges that, and the DOM parsers reserve it through reserve_array_capped(), which does not cap again, so the fast path costs the same as before (instructions retired within +-0.06 % on canada, citm_catalog and twitter in CBOR, MessagePack and UBJSON). Also re-wrap the comment of valueless_elements_base. Signed-off-by: Niels Lohmann <mail@nlohmann.me> --------- Signed-off-by: Niels Lohmann <mail@nlohmann.me> |
||
|
|
1dae5a66b1 |
Add JSON_RECURSION_DEPTH_LIMIT to set how deep value walks recurse (#6081)
Signed-off-by: Niels Lohmann <mail@nlohmann.me> |
||
|
|
a47170346a |
docs: new design for the documentation site (#5934)
* docs: new design for the documentation site Apply the brand to the Material for MkDocs site: Inter and JetBrains Mono served by the site (upright and real italic), brand colours, blue header band with the syntax pattern, wordmark in the header, new home page (hero, cards, animated feature tour), 404 page, polish for tabs, search, footer, focus rings, tables and code blocks, and theme features (code copy, previous/next footer, TOC follow, search suggestions). Draw the number railroad diagram, the parser callback events and the iterator illustrations as inline SVGs that follow the light and dark scheme. The generator scripts are in docs/mkdocs/scripts/figures; the feature slideshow (json-light.svg, json-dark.svg, replacing json.gif on the home page) is built by docs/mkdocs/scripts/slideshow. Decision nodes in five flowcharts become hexagons, which need far less room. Signed-off-by: Niels Lohmann <mail@nlohmann.me> * docs: add figures, table captions and a macro chooser - Figures with numbered captions: SAX stepper, json_view layout and edit stepper, exception map, JSON pointer and patch walkers, QA pipeline, scaling and binary size charts, roadmap lanes, release timeline, integration decision tree and namespace builder - Table captions (nj-table-caption) on 9 pages - Compile times: modules and PCH charts, filesystem section, re-measured Figure 1, links between features/modules.md and compile_times.md - Interactive macro chooser for features/arbitrary_types.md - Link check: exclude URLs that answer the plugin with 400/401/419 or are dead (customers.md) Signed-off-by: Niels Lohmann <mail@nlohmann.me> * docs: macro chooser generates adl_serializer for non-default-constructible types Signed-off-by: Niels Lohmann <mail@nlohmann.me> * docs: cross-link concept pages and API pages in See also sections Add See also links in both directions between the concept pages (features, home, integration) and the API pages, write API links in code font, give every entry a comment after a dash, and show the callback event figure on the parser callbacks page. Signed-off-by: Niels Lohmann <mail@nlohmann.me> * docs: address review comments on the new design - Home: add a "Latest release" button - Sponsors: update the list and group it by tier - Features: list all feature pages on the index page - Releases: add highlights per release, link the 4.0 roadmap, add the first commit to the timeline - Exceptions: prefix all example messages with the exception name - API: no code font for format names in the See also links of the to_/from_ pages - Merge Patch: show the document before, the patch, and the result - Replace "--" with typographic dashes, mark external links with an icon, center Mermaid diagrams Signed-off-by: Niels Lohmann <mail@nlohmann.me> --------- Signed-off-by: Niels Lohmann <mail@nlohmann.me> |
||
|
|
ccc005c012 |
Fix contradictions between the documentation, the README, and the library (#5825)
- Discarded values: the legacy macro only changes <= and >=; != is true by default - Out-of-range numbers are rejected while parsing, not stored as NaN - merge_diff round trip: point to the ordered_json caveat - ensure_ascii example shows the escaped output - out_of_range.405 is thrown for "remove"/"move" on the root, not "add" - CBOR stores binary subtypes as tags - Integer/float comparison uses exact values, not conversion - diff, flatten, and the binary writers are depth-bounded - FAQ: max_digits10 for serialization, trailing commas are supported - out_of_range.407 is still thrown by to_bon8 - FetchContent_MakeAvailable needs CMake 3.14 - json_fwd.hpp contents, operator< link, RFC 7396 for merge patch - README: dump() wording, merge_diff, MSYS2/build2, patch comment typos, operator[] link, embedded CMake example aligned with the docs Signed-off-by: Niels Lohmann <mail@nlohmann.me> |
||
|
|
6197341a21 |
Clean up non-code files (#5801)
* Clean up README, contribution guide, and repository metadata - REUSE.toml: fix the Hedley path and SPDX id (CC0-1.0), mark the docset icons as the public-domain JSON logo - CITATION.cff: v3.12.0 was released on 2025-04-11 - FILES.md: list all workflows, describe the Meson option defaults - README: ctest -LE, table of contents, typos, stale Android/MinGW advice, moved links, merge duplicate Thanks entries, list the analysis tools used in CI - CONTRIBUTING: iterative parser, json_literals.hpp is generated, links - .gitignore: backups and release outputs; .gitattributes: mark generated files - labeler: label other build systems and .github documentation - MODULE.bazel: add the module version Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Clean up CI, CMake, Makefile, and Bazel files - CMakeLists.txt: avoid VERSION_GREATER_EQUAL, which CMake < 3.7 lacks - ci.cmake: test JSON_DisableTupleReferenceConversion in ci_cmake_flags, remove unused variables and unreachable per-compiler targets, look up Clang tools consistently, forward CMAKE_CXX_FLAGS to ci_module_cpp20, format json_literals.hpp and remove backups in ci_test_amalgamation - BUILD.bazel: add json_literals.hpp to the single-header target - workflows: format json_literals.hpp before copying it, drop the obsolete natvis --version plumbing, name natvis and macro_builder in failure messages, drop the duplicate amalgamation job, install Valgrind only where needed, republish docs on version bumps, fix stale names - Makefile: complete .PHONY and help, check-amalgamation always restores the checked-in files, natvis uses its own venv, macro_builder_check installs astyle, clean removes the fuzzer binaries - remove tools/amalgamate/config_json_view.json (json_view.hpp is not on develop yet) Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Fix inaccuracies in the documentation - version history: json_base_class_t (3.11.3), JSON_HAS_CPP_11 (3.10.0), JSON_HAS_RANGES exclusions, define-type macros, ABI tags - releases: 3.12.0 raised the minimum CMake version - from_*: the (ptr, len) overloads are deleted, not removed, in 4.0.0 - contains/count/find: document the deleted integral overloads - add JSON_HAS_RANGE_VIEW_CONVERSION and list the JSON_HAS_* macros in the macro overview - mention BON8 and error_handler where binary formats are listed - broken links, outdated URLs, warning count, Hunter v0.26.12 - copy_markdown_source hook: expand snippets in the Markdown copies Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Pass /EHsc to the Windows C++20 module build ci_module_cpp20 now forwards CMAKE_CXX_FLAGS to the module build. The Windows workflow sets CMAKE_CXX_FLAGS, which replaces CMake's MSVC defaults including /EHsc, so <chrono> failed with C4530 under /WX. Signed-off-by: Niels Lohmann <mail@nlohmann.me> --------- Signed-off-by: Niels Lohmann <mail@nlohmann.me> |
||
|
|
63c10a51fc |
Review and extend the documentation, and check it in CI (#5638)
* Review and extend the documentation, and check it in CI A review of all documentation pages found factual errors, dead links, missing cross-references, and gaps in examples. This fixes them and adds checks so the same problems are caught automatically. Fixes: - wrong signatures and version histories (operator!= C++20 member, binary() subtype type, get<PointerType>(), JSON_NO_THREAD_LOCAL, ...) - stale descriptions (number parsing since #5283, UBJSON table, SAX example that no longer compiled, tsl::ordered_map advice) - dead internal and external links; repology.org badges (the domain is suspended) replaced by badges that query the registries directly - deprecation notes link the migration guide; the guide itself fixed Additions: - "See also" sections, cross-references, 25 runnable examples, 12 Mermaid diagrams, new API pages for json_pointer::operator<=> and byte_container_with_subtype::operator==/!= - landing page, guides for untrusted input and performance - "unreleased" badge after versions newer than the latest release Checks: - strict documentation build (broken links/anchors fail it); CI and the publish workflow fetch the full history the build needs - weekly external link check, Mermaid syntax check in CI - check_structure.py: example titles, heading levels, alt texts, header links, docset index coverage; its unused-example check works again - all examples produce the same output on every platform Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Keep the customer links that could not be fixed A dead link on the customers page is still the evidence of where the use of the library was documented. Keep the original URLs of the entries without a working replacement (Marne, Cisco Webex Desk Camera, Philips Hue, CyberArk) and exclude exactly these URLs from the link check. Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Correct the duplicate-key recipe's claim about SAX positions The SAX interface's key() receives no position either; only parse_error() does. Also note that the recipe does not report the path to the repeated key (see discussion #5085). Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Say the library is available as a single header and mention json_fwd.hpp Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Correct documentation errors found while hunting for bugs - patch/patch_inplace: list the JSON pointer errors parse_error.106-109 and out_of_range.402/404, and quote the actual parse_error.105 message. - unflatten: list parse_error.106/107/108 and out_of_range.404. - to_bson: list out_of_range.415 (binary subtype above 255) and note that 412 and 415 are new in 3.13.0. - to_string: state that string_t must be convertible to std::string, also in the StringType requirements table. - JSON Lines: a `while (input >> j)` loop also throws after the last value for concatenated JSON values; show a loop that works for both. - BON8: a string gets 0xFF only if nothing follows it in the message; a string at the end of an array or object is ended by 0xFE. - custom_string_type.hpp: add operator+=(char), which the "Always required" list asks for (json_pointer::to_string, flatten, unflatten, and diff did not compile), and an ADL int_to_string for diff and items. Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Cache the release headers with functools.lru_cache Codacy (Pylint) flagged the mutable default argument that header() used as its cache. functools.lru_cache keeps the same memoization without it. The script's output is unchanged. Signed-off-by: Niels Lohmann <mail@nlohmann.me> --------- Signed-off-by: Niels Lohmann <mail@nlohmann.me> |
||
|
|
ad2c14b985 |
Document response times, supported versions, access, secrets, and dependency policies (#5580)
Answer the OpenSSF Best Practices criteria that asked for policies the project follows but had not written down: - SECURITY.md: a first response within 14 days, publishing an advisory with credit once a fix is released, and that only the latest release receives security fixes. - Governance: who has access to the project's resources, how write or admin access is granted, and how CI secrets are stored and rotated. - Quality assurance: how dependencies of the build, test, and documentation tooling are pinned, scanned, and kept free of known vulnerabilities. Also update the assurance case, since comparison no longer recurses per nesting level (#5390), and point the best practices badge and links to bestpractices.dev under the program's current name. Signed-off-by: Niels Lohmann <mail@nlohmann.me> |
||
|
|
80bf54a5a2 |
Add a security assurance case to the documentation (#5572)
Describe the threat model, the trust boundaries, the secure-design argument, and how common weaknesses are countered, with links to the quality assurance page as evidence. Signed-off-by: Niels Lohmann <mail@nlohmann.me> |