The source extent of a value was read from the next node, falling back to the rest of the document when that node held a decoded string. dump() of a small value could thus allocate a buffer as large as the document. Skip a few such nodes, cap the fallback estimate, and shrink a buffer that is much larger than its output.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
parse(ptr, len) compiled: len converted to allow_exceptions, and ptr was
read as a C string, past the end of a buffer without a terminating NUL.
Delete the overloads of parse, parse_copy, accept, and read that take an
integer other than bool where the flags are expected.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
The non-template overloads for double asserted binary64 doubles wherever json.hpp was included, so the library no longer compiled where double is not IEEE 754 binary64 (AVR, -fshort-double). A trait now picks Zmij for any binary64 type, including a long double of that format (MSVC, Apple Arm), and Grisu2 for the others. Remove the unused write_short_decimal, powers_of_ten_16, zmij::decimal, zmij::to_decimal, and shortest_digits(double).
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* avoid allocating temporary basic_json for CBOR and MessagePack object keys
Signed-off-by: alexprabhat99 <alexpbara@gmail.com>
* add size() to the custom object key test type
UBJSON and BJData access object keys through size() and c_str()
directly, so the key type now provides both and the comment says why.
Signed-off-by: alexprabhat99 <alexpbara@gmail.com>
* address review: drop key size()/c_str(), test keys below the depth limit
Nothing in the library calls size() or c_str() on an object key, so the
test key type only keeps data(), which JSON_DIAGNOSTICS needs.
The CBOR and MessagePack custom key tests now also nest objects deeper
than detail::recursion_depth_limit(), so keys written by
write_cbor_iterative and write_msgpack_iterative are covered as well.
Signed-off-by: alexprabhat99 <alexpbara@gmail.com>
---------
Signed-off-by: alexprabhat99 <alexpbara@gmail.com>
* Address review comments on #5775 and #5779
Allow new defaulted parameters and new default arguments in the API
stability rules, mention the macro opt-in, and drop the redundant
recompile advice. Describe test-diagnostics-optimized as the regression
test for the fixed#5742.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Document what counts as a breaking change in the API stability rules
Spell out the 3.x compatibility rules in the roadmap: new defaulted
parameters, new default arguments, noexcept/constexpr, template
parameters, parse and dump results, accepted input, key iteration order,
iterator invalidation, implicit conversions, to_json/from_json lookup,
json_sax, value_t enumerators, and documented macros, CMake options and
headers. Also list std::hash values as not part of the public API, and
link the macro overview from the section.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
---------
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
basic_string_view::_S_compare stores the difference of two lengths in a
signed difference_type on purpose, which -fsanitize=integer reports for
every comparison with a shorter view (test-json_view_cpp17).
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
Drop the empty braced NSDMIs of the std::string members: old Clang
rejects the defaulted constructor when it is used by a member
initializer before the end of the class definition.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
GCC ignores the target attribute in modules, so the SSSE3 dispatch is
disabled for the module interface (the check stays portable, SSE2 is kept).
Make the 8-vs-16 byte unrolling condition in scan_string_run a
preprocessor/template split to avoid a constant condition (C4127).
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
Move the raw string literal out of the CHECK macro (MSVC preprocessor),
cast 64-bit header fields to std::size_t (C4244 on 32-bit), and give the
image_check section in load.md a real anchor for the mkdocs strict build.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
Value-initialize the const std::less in find_parent (clang 3.4/3.6 do not
implement DR 253), and test the Editable template argument through a
function to avoid MSVC C4127.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
contains(json_pointer) is marked JSON_HEDLEY_WARN_UNUSED_RESULT since #5477,
and parse() has been for longer. The contains example ignored the result in
two try blocks waiting for a parse_error that contains() never throws, so
they printed nothing; print the result for those pointers instead.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Use the with_*_t aliases in tests, examples, and docs
Replace spelled-out basic_json<...> instantiations that only change one
or two template parameters with nlohmann::json::with_*_t (or
ordered_json::with_*_t when the object type is ordered_map). Types that
change all three number types chain with_integers_t and with_float_t.
The raw basic_json<...> spelling stays where the template parameter
list itself is the subject: the alias tests in unit-udt.cpp, explicit
instantiations, and the ordered_json/compile-time docs.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Fix unit-large_json for clang and JSON_DIAGNOSTICS
Two test problems from #5781 broke CI on develop: CAPTURE(depth); trips
clang's -Wextra-semi-stmt, and the type_error.321 messages did not
account for the diagnostics path prefix.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Use static_cast in unit-hash for clang-tidy
#5772 added functional casts that clang-tidy reports as C-style casts
(google-readability-casting). Also append a char instead of a
one-character string in unit-large_json.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Declare the expected message prefix const in unit-large_json
Without JSON_DIAGNOSTICS the prefix was never modified, which
clang-tidy reports (misc-const-correctness).
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
---------
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Install CMake package config files with Meson, and add Meson options
Squashed onto develop from:
- Install CMake package config files with Meson
- meson: Indent code inside an if block
- meson: set a minimum Meson version
- meson: use `override_dependency()` to set dependencies
- meson: use `install_subdir` for headers
- meson: set the C++ standard to C++11
- meson: handle single header and multiheader the same way CMake does
- meson: add support for the GlobalUDLs option
- meson: add support for the ImplictConversions option
- Add meson information to FILES.md
- Complete the Meson options and match CMake's compile definitions
- Add the JSON_* definitions to the CMake pkg-config file
- Document the Meson options and check them in CI
- Fix the Meson CMake target for includedir or datadir outside the prefix
- Avoid //include in Meson-generated CMake target for prefix /
- Add DisableTupleReferenceConversion to Meson and the CMake pkg-config file
- Check in CI that Meson and pkg-config offer the CMake options
- Remove accidentally committed Python bytecode
Co-authored-by: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Add the StrictBinaryUTF8 and DeleteDeprecatedFunctions Meson options
JSON_StrictBinaryUTF8 (#5741) and JSON_DeleteDeprecatedFunctions (#5755)
arrived with develop but were missing from the Meson build and the
pkg-config file, so check_build_options failed. Both Meson options
default to false and add JSON_STRICT_BINARY_UTF8=1 and
JSON_DELETE_DEPRECATED_FUNCTIONS=1 to the dependency, the pkg-config
file, and the generated CMake target; CMake's pkg-config file now
carries both definitions too. The ci_meson_install job sets and checks
them in its non-default install.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
---------
Signed-off-by: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
Co-authored-by: Dylan Baker <dylan@pnwbakers.com>
- pow5_table.hpp: pow5_128_largest_power was unused in this branch's
own code (GCC -Werror=unused-const-variable); tie it to the table
size with a static_assert instead of removing it, since a later
branch in the stack (json-view/23-zmij) uses it.
- number_parse.hpp: rename the local variable `copy` to `buffer` to
satisfy cpplint's build/include_what_you_use check.
- unit-class_lexer.cpp: extend the NOLINT list on the seeded mt19937
with bugprone-random-generator-seed, and parenthesize
`8 * sizeof(Bits) - 1` for clang-tidy.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Make std::hash<basic_json> consistent with operator== for numbers
operator== converts between number_integer, number_unsigned, and
number_float before comparing, so json(0), json(0U), and json(0.0)
all compare equal. hash() folded the specific value_t into the
result for each of the three numeric cases, giving each a distinct
hash and breaking the standard Hash requirement that a == b implies
hash(a) == hash(b). A std::unordered_set could therefore hold all
three as separate elements even though they compare equal.
hash() now treats all three numeric variants the same way: it
converts the value to number_float_t and combines it with a single
shared type tag, so any two numbers operator== considers equal hash
identically regardless of which internal type actually holds them.
Updated the accompanying test to check this consistency directly
(including via an actual unordered_set) instead of asserting that 0,
0U, and 0.0 hash differently, since that assumption was the bug.
Also corrected the function's own doc comment and the std::hash API
docs, which described the old behavior as intended.
Fixes#5400
Signed-off-by: Afonso Januário <afonso-januario@hotmail.com>
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Remove now-unused number_integer_t/number_unsigned_t typedefs in hash()
Merging the three numeric branches into one that only reads
number_float_t left these two aliases unused, which several CI
configurations treat as a build error under -Wunused-local-typedefs.
Signed-off-by: Afonso Januário <afonso-januario@hotmail.com>
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Mark the unordered_set in the hash regression test const
clang-tidy's misc-const-correctness check flagged it: the set is
never mutated after construction, only read via size().
Signed-off-by: Afonso Januário <afonso-januario@hotmail.com>
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Normalize -0.0 in number hashes and test range ends
operator== compares numbers exactly since #5459, so equal numbers
share one value and convert to the same number_float_t. Update the
comment accordingly, map -0.0 to 0.0 before hashing (std::hash need
not do that), and test -0.0 and the ends of the integer ranges. Show
hash(0.0) in the docs example and note the change in the version
history.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Clarify hash documentation after review
- Say "may hash differently" for null, false, and numbers, since a
collision across types is possible.
- Name the storage types (signed integer, unsigned integer,
floating-point number) instead of example literals.
- Explain that the hash survives converting an integer to
number_float_t but not the lossy conversion back, and that unequal
numbers may share a hash.
- State that the example hash values are illustrative only and vary by
platform, compiler, compiler version, and library version.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
---------
Signed-off-by: Afonso Januário <afonso-januario@hotmail.com>
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
Co-authored-by: Afonso Januário <afonso-januario@hotmail.com>
* Stop binary writers overflowing the stack on deep values
to_cbor, to_msgpack, and to_ubjson recurse once per nesting level.
The parser is iterative, so a value the library accepts can crash on
the way back out.
Keep the existing recursive path for the first 128 levels and finish
anything deeper on a heap stack. Output is unchanged. BSON is left
alone because its extra size walk is a separate change.
Rebased onto the value-type output sink. The heap frames now initialize
every member, which is what -Weffc++ was rejecting.
See #5392.
Signed-off-by: ayush-singh-0601 <singhayush062006@gmail.com>
(cherry picked from commit cf65ac438f)
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Redesign the iterative binary writers around a shared recursion depth limit
Address the open review on the non-recursive CBOR/MessagePack/UBJSON/BJData
writers (#5518):
- Delete the CBOR array/object prefix helpers; both the recursive and
iterative paths call write_cbor_head(), which already existed on develop.
- MessagePack: share one write_msgpack_array_prefix()/write_msgpack_object_prefix()
helper per container kind between the recursive and iterative paths, both
going through to_msgpack_length() so an over-long container throws
out_of_range.412 identically either way.
- Reuse detail::recursion_depth_limit() instead of a separate constant, the
same bound serializer::dump() and write_bson_document() already use.
- Redesign the frames after bson_frame/dump_frame: only a container with
elements is ever pushed, its header is written at the point it is pushed,
and the iterator is set in the frame's constructor instead of a
default-then-assign two-step with a since-removed "started" flag. The
UBJSON frame keeps only the value pointer, the per-element prefix_required
flag, and the iterator; write_closer and is_object are no longer stored,
since the former is always !use_count (use_count is constant for the whole
document) and the latter follows from value->is_object().
- Factor the BJData ND-array shape check into is_bjdata_ndarray(), used by
both the recursive object case and the iterative pushing logic.
- Give the frame classes the GCC -Weffc++ treatment already used for
diff_frame: a noexcept converting constructor plus the five special members
defaulted with no explicit noexcept.
- Fix two @ref self-references in write_cbor/write_msgpack/write_ubjson's own
doc comments to point at the public to_cbor/to_msgpack/to_ubjson/to_bjdata
API instead.
- The iterative object-key write for CBOR/MessagePack now runs the same
strict-mode check_utf8() against the parent object as diagnostics context
that the recursive path already ran, so the two paths raise identical
diagnostics across the switch-over.
- Rewrite the tests: round trips instead of a bare size check, byte-exact
comparisons against the recursive output at depths around the bound, a
deep object and a BJData ND-array past the bound, a deep discarded value
(type_error.321), and the OSS-Fuzz 566583014 CBOR/MessagePack regression.
BSON is unaffected by this change; it already walks its documents
iteratively and is covered separately by #5553.
Co-authored-by: ayush-singh-0601 <179524189+ayush-singh-0601@users.noreply.github.com>
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
---------
Signed-off-by: ayush-singh-0601 <singhayush062006@gmail.com>
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
Co-authored-by: ayush-singh-0601 <singhayush062006@gmail.com>
Co-authored-by: ayush-singh-0601 <179524189+ayush-singh-0601@users.noreply.github.com>
* Add a natvis fallback visualizer for detail::json_default_base
Squashed onto develop from:
- Add a type in the natvis template for detail::json_default_base
- Document the json_default_base natvis fallback and regenerate natvis
- Match json_default_base in both its current and 3.12.0 namespace
Co-authored-by: Mihnea Magheru <sakuntalle@yahoo.com>
Signed-off-by: Mihnea Magheru <sakuntalle@yahoo.com>
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Take the natvis template from the PR in the amalgamation check
The check ran generate_natvis.py from a develop checkout, which loads
nlohmann_json.natvis.j2 from its own directory. A PR that changes the
template was therefore checked against develop's template and always
failed. Copy the PR's template next to the develop script before
running it.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
---------
Signed-off-by: Mihnea Magheru <sakuntalle@yahoo.com>
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
Co-authored-by: Mihnea Magheru <sakuntalle@yahoo.com>
Niels Lohmann
Alex Prabhat Bara
Suyog Verma
