Merge origin/develop into fix-self-aliasing-pointer-patch

Signed-off-by: Niels Lohmann <mail@nlohmann.me>

docs/mkdocs/docs/api/basic_json/binary_t.md

@@ -90,8 +90,9 @@ type `#!cpp binary_t*` must be dereferenced.
 
 - MessagePack
     - If a subtype is given and the binary array contains exactly 1, 2, 4, 8, or 16 elements, the fixext family (fixext1,
-      fixext2, fixext4, fixext8) is used. For other sizes, the ext family (ext8, ext16, ext32) is used. The subtype is
-      then added as a signed 8-bit integer.
+      fixext2, fixext4, fixext8, fixext16) is used. For other sizes, the ext family (ext8, ext16, ext32) is used. The
+      subtype is then written as the signed 8-bit ext type: subtypes 128 to 255 map to the negative (reserved) ext
+      types, and on reading the ext type is exposed as an unsigned subtype from 0 to 255.
     - If no subtype is given, the bin family (bin8, bin16, bin32) is used.
 
 - BSON

docs/mkdocs/docs/api/basic_json/bjdata_version_t.md

@@ -0,0 +1,48 @@
+# <small>nlohmann::basic_json::</small>bjdata_version_t
+
+```cpp
+enum class bjdata_version_t
+{
+    draft2,
+    draft3
+};
+```
+
+This enumeration is used in [`to_bjdata`](to_bjdata.md) to choose the version of the BJData specification to write:
+
+draft2
+:   BJData Draft 2 (the default). Binary values are written as arrays of `U` integers, and ND-arrays with
+    `"_ArrayType_": "byte"` are written as regular objects, since the `B` marker is not part of Draft 2.
+
+draft3
+:   BJData Draft 3. Binary values are written as `B` elements: as an optimized binary array (`[$B#`) if both `use_size`
+    and `use_type` are set, and as an array of `B`-prefixed elements otherwise. ND-arrays with
+    `"_ArrayType_": "byte"` are written as packed arrays (`[$B#[...]`).
+
+Only the writer is affected by the version. [`from_bjdata`](from_bjdata.md) reads the markers of both drafts.
+
+## Examples
+
+??? example
+
+    The example below shows how the different values of the `bjdata_version_t` influence the serialization of a binary
+    value with [`to_bjdata`](to_bjdata.md).
+
+    ```cpp
+    --8<-- "examples/bjdata_version_t.cpp"
+    ```
+
+    Output:
+
+    ```json
+    --8<-- "examples/bjdata_version_t.output"
+    ```
+
+## See also
+
+- [to_bjdata](to_bjdata.md) serializes a JSON value to BJData
+- [BJData](../../features/binary_formats/bjdata.md) - the article on the BJData format
+
+## Version history
+
+- Added in version 3.12.0.

docs/mkdocs/docs/api/basic_json/cbor_tag_handler_t.md

@@ -15,11 +15,13 @@ error
 :   report a parse error in case of a tag (the `from_cbor` overloads throw a `parse_error` exception by default)
 
 ignore
-:   ignore tags
+:   ignore tags (also in front of a text string map key)
 
 store
 :   store tagged byte strings (for bytes 0xd8..0xdb) as binary values with the tag as subtype; other tagged values are
-    read as if the tag were ignored. If several tags precede a byte string, only the innermost one is stored.
+    read as if the tag were ignored. If several tags precede a byte string, only the tag directly in front of it is
+    stored, and only when it has the form 0xd8..0xdb (a tag 0..23 written as 0xc0..0xd7 is skipped). Tags in front of a
+    text string map key are skipped.
 
 ## Examples
 

docs/mkdocs/docs/api/basic_json/contains.md

@@ -61,11 +61,18 @@ Strong exception safety: if an exception occurs, the original value stays intact
 
 ## Complexity
 
-Logarithmic in the size of the JSON object.
+1. Logarithmic in the size of the JSON object.
+2. Logarithmic in the size of the JSON object.
+3. At most one lookup per reference token of `ptr`, each logarithmic in the size of the container at that level:
+   O(*n* log *m*) for *n* reference tokens and containers of size at most *m*.
+4. Deleted; a call with an integral argument does not compile.
 
 ## Notes
 
-- This method always returns `#!cpp false` when executed on a JSON type that is not an object.
+- Overloads (1) and (2) always return `#!cpp false` when executed on a JSON type that is not an object. Overload (3)
+  also works on arrays and on primitive values: the empty JSON pointer resolves in every JSON value (so
+  `#!cpp json(1).contains(""_json_pointer)` returns `#!cpp true`), and `#!cpp json({1, 2}).contains("/1"_json_pointer)`
+  returns `#!cpp true`.
 - This method can be executed on any JSON value type.
 - Calling this function with an integer argument (for example, `#!cpp contains(0)`) does not compile: such an argument
   would otherwise implicitly convert to a null `#!cpp const char*` and, from there, cause undefined behavior when

docs/mkdocs/docs/api/basic_json/diff.md

@@ -2,17 +2,27 @@
 
 ```cpp
 static basic_json diff(const basic_json& source,
-                       const basic_json& target);
+                       const basic_json& target,
+                       const string_t& path = "");
 ```
 
 Creates a [JSON Patch](http://jsonpatch.com) so that value `source` can be changed into the value `target` by calling
 [`patch`](patch.md) function.
 
-For two JSON values `source` and `target`, the following code always yields `#!cpp true`:
+For two JSON values `source` and `target`, the following code yields `#!cpp true`:
 ```cpp
 source.patch(diff(source, target)) == target;
 ```
 
+The equality holds up to [`operator==`](operator_eq.md), so it has the following exceptions:
+
+- A value that is not equal to itself cannot round-trip. This applies to `NaN` (also nested in an array or object) and
+  to [discarded](is_discarded.md) values: `diff` emits a `replace` operation for them. A `NaN` in the patch is
+  serialized as `#!json null`, so a patch that was dumped and parsed again would set `#!json null`.
+- Numbers that compare equal produce no operation, even if their types or signs differ: `diff(1, 1.0)`,
+  `diff(1u, 1)` (unsigned and signed integer) and `diff(0.0, -0.0)` all return `#!json []`. The patched value is then
+  the `source` and keeps its number type.
+
 ## Parameters
 
 `source` (in)
@@ -21,6 +31,12 @@ source.patch(diff(source, target)) == target;
 `target` (in)
 :   JSON value to compare against
 
+`path` (in)
+:   a prefix that is put verbatim in front of the `path` member of every operation (default: `""`, which addresses the
+    root of the value). The prefix is neither escaped nor validated: `#!cpp diff(1, 2, "abc")` yields an operation with
+    the `path` `abc`, which is not a valid JSON Pointer. Use it with a valid JSON Pointer such as `/root` and escape
+    `~` and `/` in its reference tokens (see [JSON Pointer](../../features/json_pointer.md)).
+
 ## Return value
 
 a JSON patch to convert the `source` to `target`
@@ -31,11 +47,32 @@ Strong guarantee: `source` and `target` are never modified.
 
 ## Complexity
 
-Linear in the lengths of `source` and `target`.
+Linear in the total number of values (including nested ones) in `source` and `target`, times the cost of a key-based
+object operation (looking up a key in an object): logarithmic for [`json`](../json.md), and linear for
+[`ordered_json`](../ordered_json.md) (see [`ordered_map` complexity](../ordered_map.md#complexity)). For
+`ordered_json`, diffing two objects with `n` and `m` members therefore takes O((n+m)²) when their keys do not line up
+(e.g., a key was added or the keys are in a different order). The size of the patch is proportional to the number of
+operations times the length of their paths, so a small change deep inside a value yields a long `path`.
 
 ## Notes
 
-Currently, only `remove`, `add`, and `replace` operations are generated.
+- Currently, only `remove`, `add`, and `replace` operations are generated.
+- The patch is correct, but not guaranteed to be minimal. For instance, `diff([1,2,3], [0,1,2,3])` yields three
+  `replace` operations and one `add` operation instead of a single insertion.
+- Differences between two arrays are reported index by index. Elements that were added at the end of the array are added
+  with `add` operations on the path `/-` (appended in order), and elements that were removed are removed with `remove`
+  operations from the highest index down to the lowest, so that the remaining indices stay valid.
+- For objects, the operations for the members of `source` come first (`replace`, `remove`, or the operations for nested
+  values, in the iteration order of `source`), followed by `add` operations for the members that only `target` has.
+- For [`ordered_json`](../ordered_json.md), objects with the same keys in a different order are different. As a patch
+  cannot reorder members, `diff` removes all keys of the `source` object and adds them again in the order of the
+  `target`.
+- If `source` and `target` differ as a whole (e.g., different types), the patch consists of a single `replace`
+  operation for the root of the value, i.e., with the `path` `""` (or the given `path` prefix).
+- The `value` members of the patch hold copies of values of `target`. A [binary](../../features/binary_values.md) value
+  has no JSON representation: when a patch that contains one is serialized, it becomes an object such as
+  `#!json {"bytes":[1,3],"subtype":null}`, so a parsed patch no longer holds a binary value (and would set that object
+  instead).
           
 ## Examples
 

docs/mkdocs/docs/api/basic_json/from_bjdata.md

@@ -82,8 +82,11 @@ Strong guarantee: if an exception is thrown, there are no changes in the JSON va
 - Throws [parse_error.112](../../home/exceptions.md#jsonexceptionparse_error112) if a parse error occurs
 - Throws [parse_error.113](../../home/exceptions.md#jsonexceptionparse_error113) if a string could not be parsed
   successfully, or if a string value or object key is not valid UTF-8 and `error_handler` is `strict`
+- Throws [parse_error.115](../../home/exceptions.md#jsonexceptionparse_error115) if the text of a high-precision
+  number (`H`) is not a valid number
 - Throws [out_of_range.408](../../home/exceptions.md#jsonexceptionout_of_range408) if the size of an optimized container
-  or n-dimensional array cannot be represented by `std::size_t`
+  cannot be represented by `std::size_t` or exceeds the container's `max_size()`, or if the product of the dimensions of
+  an n-dimensional array overflows
 
 ## Complexity
 

docs/mkdocs/docs/api/basic_json/from_bon8.md

@@ -74,6 +74,11 @@ Strong guarantee: if an exception is thrown, there are no changes in the JSON va
 - Throws [parse_error.112](../../home/exceptions.md#jsonexceptionparse_error112) if a parse error occurs, for instance
   an invalid byte, a string that is not valid UTF-8, or an object key that is not a string
 
+The UTF-8 validity of strings is always checked, independent of
+[`JSON_STRICT_BINARY_UTF8`](../macros/json_strict_binary_utf8.md), because the end of a BON8 string is determined from
+its encoding. Duplicate object keys are accepted; the last value wins (see
+[BON8](../../features/binary_formats/bon8.md)).
+
 ## Complexity
 
 Linear in the size of the input.

docs/mkdocs/docs/api/basic_json/from_bson.md

@@ -80,7 +80,8 @@ Strong guarantee: if an exception is thrown, there are no changes in the JSON va
 - Throws [`parse_error.110`](../../home/exceptions.md#jsonexceptionparse_error110) if the given input ends prematurely or
   the end of the input was not reached when `strict` was set to true
 - Throws [`parse_error.112`](../../home/exceptions.md#jsonexceptionparse_error112) if a parse error occurs (e.g., an
-  invalid string or byte array length)
+  invalid string or byte array length, an invalid inner length of a binary value with subtype `0x02`, or a document size
+  that does not match the content; `strict` does not affect the document size checks)
 - Throws [`parse_error.114`](../../home/exceptions.md#jsonexceptionparse_error114) if an unsupported BSON record type is
   encountered
 - Throws [`parse_error.113`](../../home/exceptions.md#jsonexceptionparse_error113) if a string value or object key is

docs/mkdocs/docs/api/basic_json/from_cbor.md

@@ -32,8 +32,10 @@ The exact mapping and its limitations are described on a [dedicated page](../../
     
     - an `std::istream` object
     - a `FILE` pointer
-    - a C-style array of characters
-    - a pointer to a null-terminated string of single byte characters
+    - a C-style array of characters (its terminating NUL is read as trailing data: `parse_error.110` unless `strict` is
+      `false`)
+    - a pointer to a null-terminated string of single byte characters (read up to the first 0x00 byte, which is a valid
+      CBOR byte)
     - a container `obj` for which `begin(obj)` and `end(obj)` produce a valid pair of iterators
       (as found via ADL or member functions, with semantics compatible to `std::begin` and `std::end`)
 
@@ -89,8 +91,14 @@ Strong guarantee: if an exception is thrown, there are no changes in the JSON va
 - Throws [parse_error.112](../../home/exceptions.md#jsonexceptionparse_error112) if unsupported features from CBOR were
   used in the given input or if the input is not valid CBOR
 - Throws [parse_error.113](../../home/exceptions.md#jsonexceptionparse_error113) if a map key is not a string (keys of
-  other types are not supported, as JSON object keys are always strings), or if a string value or object key is not
-  valid UTF-8 and `error_handler` is `strict`
+  other types are not supported, as JSON object keys are always strings), if the head of a string or byte string is
+  malformed (including a chunk of the wrong type or an indefinite-length string nested inside an indefinite-length
+  string), or if a string value or object key (or one chunk of an indefinite-length string) is not valid UTF-8 and
+  `error_handler` is `strict`
+- Throws [out_of_range.408](../../home/exceptions.md#jsonexceptionout_of_range408) if an array or map announces
+  a length that `std::size_t` cannot hold, or that equals `std::size_t(-1)` (for example `9B FF FF FF FF FF FF FF FF`)
+- Throws [out_of_range.406](../../home/exceptions.md#jsonexceptionout_of_range406) if a floating-point number does not
+  fit into `number_float_t`
 
 ## Complexity
 

docs/mkdocs/docs/api/basic_json/from_ubjson.md

@@ -79,11 +79,18 @@ Strong guarantee: if an exception is thrown, there are no changes in the JSON va
 
 - Throws [parse_error.110](../../home/exceptions.md#jsonexceptionparse_error110) if the given input ends prematurely or
   the end of the file was not reached when `strict` was set to true
-- Throws [parse_error.112](../../home/exceptions.md#jsonexceptionparse_error112) if a parse error occurs
+- Throws [parse_error.112](../../home/exceptions.md#jsonexceptionparse_error112) if an invalid type marker is read
+  (including a type marker after `$` of an optimized container, even if its count is 0), or if `$` is not followed by `#`
 - Throws [parse_error.113](../../home/exceptions.md#jsonexceptionparse_error113) if a string could not be parsed
-  successfully, or if a string value or object key is not valid UTF-8 and `error_handler` is `strict`
-- Throws [out_of_range.408](../../home/exceptions.md#jsonexceptionout_of_range408) if the size of an optimized container
-  or n-dimensional array cannot be represented by `std::size_t`
+  successfully (negative or non-integer length, `C` followed by a byte above 0x7F), if the count of an optimized
+  container is negative, or if a string value or object key is not valid UTF-8 and `error_handler` is `strict`
+- Throws [parse_error.115](../../home/exceptions.md#jsonexceptionparse_error115) if the text of a high-precision number
+  (`H`) is not a valid JSON number
+- Throws [out_of_range.406](../../home/exceptions.md#jsonexceptionout_of_range406) if a high-precision number, or a
+  float64 when `number_float_t` is `float`, does not fit into `number_float_t`
+- Throws [out_of_range.408](../../home/exceptions.md#jsonexceptionout_of_range408) if the count of an optimized
+  container exceeds the capacity of the container (or of `std::size_t`), or if an optimized array of `Z`, `T`, or `F` has
+  more than 1,048,576 elements
 
 ## Complexity
 

docs/mkdocs/docs/api/basic_json/index.md

@@ -121,6 +121,7 @@ The class satisfies the following concept requirements:
 - [**json_pointer**](../json_pointer/index.md) - JSON Pointer implementation
 - [**json_serializer**](json_serializer.md) - type of the serializer to for conversions from/to JSON
 - [**error_handler_t**](error_handler_t.md) - type to choose behavior on decoding errors
+- [**bjdata_version_t**](bjdata_version_t.md) - type to choose the BJData version to write
 - [**cbor_tag_handler_t**](cbor_tag_handler_t.md) - type to choose how to handle CBOR tags
 - **initializer_list_t** - type for initializer lists of `basic_json` values
 - [**input_format_t**](input_format_t.md) - type to choose the format to parse

docs/mkdocs/docs/api/basic_json/merge_patch.md

@@ -39,13 +39,33 @@ Basic guarantee: if an exception is thrown during the operation, the JSON value
 
 ## Complexity
 
-Linear in the lengths of `apply_patch`.
+Linear in the total number of values (including nested ones) in `apply_patch`, times the cost of a key-based object
+operation (looking up, adding, or erasing a member): logarithmic for [`json`](../json.md), and linear for
+[`ordered_json`](../ordered_json.md) (see [`ordered_map` complexity](../ordered_map.md#complexity)). For
+`ordered_json`, patching an object that has `n` members with a patch that has `m` members therefore takes O(n·m). The
+cost also includes one copy of `apply_patch` (see the notes below).
 
 ## Notes
 
-`apply_patch` may be `#!cpp *this` itself or refer to a value contained in `#!cpp *this` (for example, a subobject
-returned by `#!cpp (*this)[key]`); it is read as it was when `merge_patch()` was called, before any modification of
-`#!cpp *this`.
+- `apply_patch` may be `#!cpp *this` itself or refer to a value contained in `#!cpp *this` (for example, a subobject
+  returned by `#!cpp (*this)[key]`); it is read as it was when `merge_patch()` was called, before any modification of
+  `#!cpp *this`. To make this possible, the function copies `apply_patch` before it modifies `#!cpp *this`, so the cost
+  includes one copy of the patch.
+- A merge patch uses `#!json null` to remove a member, so it cannot set a member to `#!json null`: applying
+  `#!json {"a":null}` to `#!json {"a":1}` gives `#!json {}`.
+- Arrays are not merged: an array in the patch replaces the target value as a whole, and a `#!json null` inside an
+  array is kept as an element. `#!json null` members of the target that the patch does not mention are preserved.
+- A `#!json null` in the patch only removes a member; it does not prevent the creation of the enclosing objects.
+  Applying `#!json {"a":{"b":null}}` to `#!json {}` gives `#!json {"a":{}}` (see example 15 in Appendix A of the RFC).
+- If `apply_patch` is not an object, it replaces the target as a whole. In particular, a `#!json null` patch turns the
+  target into `#!json null`. If `apply_patch` is an object and the target is not, the target is first replaced by an
+  empty object, so applying `#!json {}` to `#!json 1` gives `#!json {}`.
+- A merge patch cannot express every change; for example, it cannot reorder array elements or remove a specific array
+  element. Use [JSON Patch](../../features/json_patch.md) ([RFC 6902](https://tools.ietf.org/html/rfc6902)) for that.
+  [`merge_diff`](merge_diff.md) has a matching limitation, see its notes.
+- A [discarded](is_discarded.md) value is treated like any other non-object value: a discarded
+  `apply_patch` turns the target into a discarded value, and an object patch replaces a discarded target by an object
+  as described above.
 
 ## Examples
 

docs/mkdocs/docs/api/basic_json/operator[].md

@@ -137,10 +137,13 @@ Strong exception safety: if an exception occurs, the original value stays intact
 
         When the JSON pointer traverses intermediate levels that don't exist at all yet (not just a missing
         leaf), each missing level is created as an array or an object depending on whether the corresponding
-        pointer token parses as a non-negative integer: a numeric token creates an array, a non-numeric token
-        creates an object. For example, on an initially `#!json null` value, `/foo/0/0/0` creates nested arrays,
-        while `/foo/one/one/one` creates nested objects. This is not specified by the JSON Pointer RFC; it is
-        this library's own, intentional disambiguation rule. See also [JSON Pointer](../../features/json_pointer.md).
+        pointer token is a valid array index: the token `0`, a sequence of digits that does not begin with `0`,
+        or the token `-` creates an array, and every other token creates an object. For example, on an
+        initially `#!json null` value, `/foo/0/0/0` creates nested arrays, while `/foo/one/one/one` creates
+        nested objects. Tokens such as `01` or the empty token cannot be array indices (cf. RFC 6901, Sect. 4)
+        and therefore create objects, just as they would if the level already existed as an object. This is not
+        specified by the JSON Pointer RFC; it is this library's own, intentional disambiguation rule. See also
+        [JSON Pointer](../../features/json_pointer.md).
 
 !!! warning "Deprecation"
 

docs/mkdocs/docs/api/basic_json/patch.md

@@ -40,7 +40,7 @@ Strong guarantee: if an exception is thrown, there are no changes in the JSON va
   where an existing element is required (the "path" of "replace", the "from" of "move" and "copy"); example:
   `"array index '-' (3) is out of range"`.
 - Throws [`out_of_range.403`](../../home/exceptions.md#jsonexceptionout_of_range403) if a JSON pointer inside the patch
-  could not be resolved successfully in the current JSON value; example: `"key baz not found"`.
+  could not be resolved successfully in the current JSON value; example: `"key 'baz' not found"`.
 - Throws [`out_of_range.404`](../../home/exceptions.md#jsonexceptionout_of_range404) if a reference token of a JSON
   pointer inside the patch cannot be resolved, e.g., `-` in a "remove" operation or `1a` for an array; example:
   `"unresolved reference token '-'"`.
@@ -53,7 +53,10 @@ Strong guarantee: if an exception is thrown, there are no changes in the JSON va
 - Throws [`out_of_range.414`](../../home/exceptions.md#jsonexceptionout_of_range414) if a "move" operation's "from"
   location is a proper prefix of its "path" location.
 - Throws [`other_error.501`](../../home/exceptions.md#jsonexceptionother_error501) if "test" operation was
-  unsuccessful.
+  unsuccessful. A "test" operation whose "path" does not exist is unsuccessful, too: the failed lookup is reported as a
+  failed test, even if the operation has no "value" member (which would otherwise be
+  [`parse_error.105`](../../home/exceptions.md#jsonexceptionparse_error105)). Which of the two errors is reported for
+  this combination depends on the order in which the operands of a comparison are evaluated, so do not rely on it.
 
 ## Complexity
 
@@ -65,6 +68,10 @@ the JSON value, the complexity can usually be neglected.
 The application of a patch is atomic: Either all operations succeed and the patched document is returned or an exception
 is thrown. In any case, the original value is not changed: the patch is applied to a copy of the value.
 
+Duplicate member names inside an operation object are resolved by the parser before the patch is applied (the last one
+is kept, see [`object_t`](object_t.md#behavior)), so `#!json {"op": "add", "op": "remove", "path": "/a"}` is a
+`remove` operation.
+
 ## Examples
 
 ??? example "Example: apply a JSON patch"
@@ -108,6 +115,7 @@ is thrown. In any case, the original value is not changed: the patch is applied
 - Added in version 2.0.0.
 - Added [`out_of_range.411`](../../home/exceptions.md#jsonexceptionout_of_range411) and stopped relying on an internal assertion when an "add" operation's
   target location has a non-object/non-array parent in version 3.13.0.
+  This includes a `null` parent, which was previously silently converted to an object, in version 3.13.0.
 - Added [`out_of_range.413`](../../home/exceptions.md#jsonexceptionout_of_range413) and stopped silently ignoring a "remove" operation whose target
   location has a non-object/non-array parent in version 3.13.0.
 - Added [`out_of_range.414`](../../home/exceptions.md#jsonexceptionout_of_range414) and rejected a "move" operation whose "from" location is a proper

docs/mkdocs/docs/api/basic_json/patch_inplace.md

@@ -36,7 +36,7 @@ No guarantees, value may be corrupted by an unsuccessful patch operation.
   where an existing element is required (the "path" of "replace", the "from" of "move" and "copy"); example:
   `"array index '-' (3) is out of range"`.
 - Throws [`out_of_range.403`](../../home/exceptions.md#jsonexceptionout_of_range403) if a JSON pointer inside the patch
-  could not be resolved successfully in the current JSON value; example: `"key baz not found"`.
+  could not be resolved successfully in the current JSON value; example: `"key 'baz' not found"`.
 - Throws [`out_of_range.404`](../../home/exceptions.md#jsonexceptionout_of_range404) if a reference token of a JSON
   pointer inside the patch cannot be resolved, e.g., `-` in a "remove" operation or `1a` for an array; example:
   `"unresolved reference token '-'"`.
@@ -49,7 +49,10 @@ No guarantees, value may be corrupted by an unsuccessful patch operation.
 - Throws [`out_of_range.414`](../../home/exceptions.md#jsonexceptionout_of_range414) if a "move" operation's "from"
   location is a proper prefix of its "path" location.
 - Throws [`other_error.501`](../../home/exceptions.md#jsonexceptionother_error501) if "test" operation was
-  unsuccessful.
+  unsuccessful. A "test" operation whose "path" does not exist is unsuccessful, too: the failed lookup is reported as a
+  failed test, even if the operation has no "value" member (which would otherwise be
+  [`parse_error.105`](../../home/exceptions.md#jsonexceptionparse_error105)). Which of the two errors is reported for
+  this combination depends on the order in which the operands of a comparison are evaluated, so do not rely on it.
 
 ## Complexity
 
@@ -62,6 +65,10 @@ Unlike [`patch`](patch.md), `patch_inplace` applies the operation "in place" and
 That makes it faster for large documents by avoiding the copy. However, the JSON value might be corrupted if the
 function throws an exception.
 
+Duplicate member names inside an operation object are resolved by the parser before the patch is applied (the last one
+is kept, see [`object_t`](object_t.md#behavior)), so `#!json {"op": "add", "op": "remove", "path": "/a"}` is a
+`remove` operation.
+
 The JSON patch may be the JSON value itself (`#!cpp j.patch_inplace(j)`): the operations are then read from a copy of
 the patch made before the first operation is applied, so the result is the same as that of
 `#!cpp j = j.patch(j)`, and the exception safety is the same as above.
@@ -116,6 +123,7 @@ the patch made before the first operation is applied, so the result is the same
 - Added in version 3.11.0.
 - Added [`out_of_range.411`](../../home/exceptions.md#jsonexceptionout_of_range411) and stopped relying on an internal assertion when an "add" operation's
   target location has a non-object/non-array parent in version 3.13.0.
+  This includes a `null` parent, which was previously silently converted to an object, in version 3.13.0.
 - Added [`out_of_range.413`](../../home/exceptions.md#jsonexceptionout_of_range413) and stopped silently ignoring a "remove" operation whose target
   location has a non-object/non-array parent in version 3.13.0.
 - Added [`out_of_range.414`](../../home/exceptions.md#jsonexceptionout_of_range414) and rejected a "move" operation whose "from" location is a proper

docs/mkdocs/docs/api/basic_json/to_bjdata.md

@@ -43,7 +43,8 @@ The exact mapping and its limitations are described on a [dedicated page](../../
 `#!cpp false` by default.
 
 `version` (in)
-:   which version of BJData to use (see note on "Binary values" on [BJData](../../features/binary_formats/bjdata.md));
+:   which version of BJData to use, see [`bjdata_version_t`](bjdata_version_t.md) and the note on "Binary values" on
+[BJData](../../features/binary_formats/bjdata.md);
 optional, `#!cpp bjdata_version_t::draft2` by default.
 
 `error_handler` (in)
@@ -64,7 +65,9 @@ Strong guarantee: if an exception is thrown, there are no changes in the JSON va
 ## Exceptions
 
 - Throws [`other_error.502`](../../home/exceptions.md#jsonexceptionother_error502) if `use_type` is true and `use_size`
-  is false, and `j` contains a non-empty array, object, or binary value.
+  is false, and `j` contains a non-empty array or object, or a non-empty binary value (with
+  `version = bjdata_version_t::draft3`, any binary value, including an empty one).
+  Scalars, empty arrays, and empty objects do not throw.
 - Throws [type_error.316](../../home/exceptions.md#jsonexceptiontype_error316) if a string or object key in `j` is
   not valid UTF-8 and `error_handler` is `strict` (the default only if
   [`JSON_STRICT_BINARY_UTF8`](../macros/json_strict_binary_utf8.md) is enabled)

docs/mkdocs/docs/api/basic_json/to_bson.md

@@ -13,7 +13,7 @@ static void to_bson(const basic_json& j, detail::output_adapter<char> o,
 ```
 
 BSON (Binary JSON) is a binary format in which zero or more ordered key/value pairs are stored as a single entity (a
-so-called document).
+so-called document). The members of an object are written in the order in which iteration visits them.
 
 1. Returns a byte vector containing the BSON serialization.
 2. Writes the BSON serialization to an output adapter.

docs/mkdocs/docs/api/basic_json/to_cbor.md

@@ -42,7 +42,8 @@ The exact mapping and its limitations are described on a [dedicated page](../../
 
 ## Exception safety
 
-Strong guarantee: if an exception is thrown, there are no changes in the JSON value.
+Strong guarantee: if an exception is thrown, there are no changes in the JSON value. Bytes that were already written to
+the output adapter are not taken back.
 
 ## Exceptions
 

docs/mkdocs/docs/api/basic_json/to_msgpack.md

@@ -53,7 +53,7 @@ Strong guarantee: if an exception is thrown, there are no changes in the JSON va
   value, array, or object exceeds 4294967295, the maximum MessagePack can store; example:
   `"MessagePack length 4294967296 exceeds maximum of 4294967295"`
 - Throws [`out_of_range.415`](../../home/exceptions.md#jsonexceptionout_of_range415) if the subtype of a binary value
-  exceeds 255, the maximum of the MessagePack ext type; example:
+  exceeds 255, the largest value the library can store in the one-byte MessagePack ext type; example:
   `"subtype 70000 is too large for the MessagePack ext type (max 255)"`
 - Throws [type_error.316](../../home/exceptions.md#jsonexceptiontype_error316) if a string or object key in `j` is
   not valid UTF-8 and `error_handler` is `strict`

docs/mkdocs/docs/api/basic_json/unflatten.md

@@ -36,9 +36,9 @@ The function can throw the following exceptions:
 - Throws [`parse_error.109`](../../home/exceptions.md#jsonexceptionparse_error109) if an array index in a key is not a
   number; example: `"array index 'one' is not a number"`
 - Throws [`out_of_range.404`](../../home/exceptions.md#jsonexceptionout_of_range404) if a level becomes an array
-  (because one of its keys is `0`) and another key at that level begins with a digit but is not a valid array index
-  (such as `1a`), or is `-`; example:
-  `"unresolved reference token '-'"`
+  (because one of its keys is `0`) and another key at that level is empty (as in `/a/`), is `-`, or begins with a digit
+  but is not a valid array index (such as `1a`); examples: `"unresolved reference token '-'"`,
+  `"unresolved reference token ''"`
 
 ## Complexity
 
@@ -46,7 +46,7 @@ Linear in the size of the JSON value.
 
 ## Notes
 
-Empty objects and arrays are flattened by [`flatten()`](flatten.md) to `#!json null` values and cannot unflattened to
+Empty objects and arrays are flattened by [`flatten()`](flatten.md) to `#!json null` values and cannot be unflattened to
 their original type.
 
 A flattened array and a flattened object whose keys are array indices are indistinguishable, because both are
@@ -54,7 +54,12 @@ described by the same JSON pointers. A value is therefore restored as an array i
 reference token `0`, and as an object otherwise: `#!json {"2": 1}` is restored unchanged, whereas `#!json {"0": 1}` is
 restored as `#!json [1]`. This decision does not depend on the order in which the flattened object is iterated.
 
-Apart from these two cases, for a JSON value `j`, the following is always true:
+A third case is an object that has the key `0` next to a key that is not a valid array index: `#!json {"0": 1, "b": 2}`
+is flattened to `#!json {"/0": 1, "/b": 2}`, and unflatten treats the level as an array and throws
+[`parse_error.109`](../../home/exceptions.md#jsonexceptionparse_error109) because `b` is not a number. (For the keys
+`-`, `1a`, or the empty key instead of `b`, it throws [`out_of_range.404`](../../home/exceptions.md#jsonexceptionout_of_range404).)
+
+Apart from these three cases, for a JSON value `j`, the following is always true:
 `#!cpp j == j.flatten().unflatten()`.
 
 ## Examples

docs/mkdocs/docs/api/basic_json/value.md

@@ -45,6 +45,9 @@ This is equivalent to Python's `dict.get(key, default)`.
        return default_value;
     }
     ```
+    with one exception: if the JSON value is neither an array nor an object, the function throws
+    [`type_error.306`](../../home/exceptions.md#jsonexceptiontype_error306) before looking at `ptr`, even for the empty
+    pointer, whereas `at` returns the value itself for the empty pointer.
 
 !!! note "Differences to `at` and `operator[]`"
 

docs/mkdocs/docs/api/basic_json_document/erase.md

@@ -12,7 +12,7 @@ void erase(view_type array, I idx);
 std::size_t erase(const json_pointer& ptr);
 ```
 
-Only an **editable** document (`#!cpp Editable == true`, e.g. [`json_editable_document`](../json_editable_document.md))
+Only an **editable** document (`#!cpp view_mode::editable`, e.g. [`json_editable_document`](../json_editable_document.md))
 has `erase`; calling it on a read-only `basic_json_document` fails to compile (`#!cpp static_assert`).
 
 1. Removes every member of `object` whose key is `key` (see [Notes](#notes) on duplicate keys) and returns how many

docs/mkdocs/docs/api/basic_json_document/index.md

@@ -3,7 +3,7 @@
 <small>Defined in header `<nlohmann/json_view.hpp>`</small>
 
 ```cpp
-template<typename BasicJsonType, bool Editable = false>
+template<typename BasicJsonType, view_mode Mode = view_mode::read_only>
 class basic_json_document;
 ```
 
@@ -20,9 +20,9 @@ is move-only: a copy would duplicate the whole index, the decoded-string buffer,
 enough in every use we know of. The index, the decoded strings, and the owned text live in one heap block that the
 document holds through a `#!cpp std::unique_ptr`; this is also why views survive a move of the document.
 
-With `#!cpp Editable == true`, the document also offers [`set`](set.md), [`push_back`](push_back.md),
+With `#!cpp Mode == view_mode::editable`, the document also offers [`set`](set.md), [`push_back`](push_back.md),
 [`insert`](insert.md), and [`erase`](erase.md) to change values in place, see [Edits](#edits) below. The source text
-itself is never written; a read-only document (`#!cpp Editable == false`, the default) does not carry any of the
+itself is never written; a read-only document (`#!cpp view_mode::read_only`, the default) does not carry any of the
 bookkeeping edits need, and calling any of them on one fails to compile (`#!cpp static_assert`).
 
 ## Template parameters
@@ -32,9 +32,10 @@ bookkeeping edits need, and calling any of them on one fails to compile (`#!cpp
     [`ordered_json`](../ordered_json.md). Only 64-bit `number_integer_t`/`number_unsigned_t` types are supported; this
     is checked with a `static_assert`.
 
-`Editable`
-:   whether the document supports [`set`](set.md), [`push_back`](push_back.md), [`insert`](insert.md), and
-    [`erase`](erase.md) (optional, `#!cpp false` by default). See [Edits](#edits) below.
+`Mode`
+:   a [`view_mode`](../view_mode.md): `#!cpp view_mode::editable` if the document supports [`set`](set.md),
+    [`push_back`](push_back.md), [`insert`](insert.md), and [`erase`](erase.md) (optional, `#!cpp view_mode::read_only`
+    by default). See [Edits](#edits) below.
 
 ## Specializations
 
@@ -47,7 +48,7 @@ bookkeeping edits need, and calling any of them on one fails to compile (`#!cpp
 
 ## Member types
 
-- **view_type** - the type of view returned by [`root()`](root.md) (`#!cpp basic_json_view<BasicJsonType, Editable>`)
+- **view_type** - the type of view returned by [`root()`](root.md) (`#!cpp basic_json_view<BasicJsonType, Mode>`)
 - **value_t** - the JSON type enumeration, see [`basic_json::value_t`](../basic_json/value_t.md)
 - **image_check** - how [`load()`](load.md) validates an image (`full`, `bounds`, `none`), see [`image_check`](load.md#image_check)
 
@@ -80,15 +81,15 @@ bookkeeping edits need, and calling any of them on one fails to compile (`#!cpp
 ### Edits
 
 - [**set**](set.md) - replace a value, or set an object member, an array element, or the value a JSON pointer refers
-  to (`#!cpp Editable` documents only)
-- [**push_back**](push_back.md) - append to an array (`#!cpp Editable` documents only)
-- [**insert**](insert.md) - insert an element into an array before a given position (`#!cpp Editable` documents only)
+  to (editable documents only)
+- [**push_back**](push_back.md) - append to an array (editable documents only)
+- [**insert**](insert.md) - insert an element into an array before a given position (editable documents only)
 - [**erase**](erase.md) - remove an object member, an array element, or the value a JSON pointer refers to
-  (`#!cpp Editable` documents only)
+  (editable documents only)
 
 ## Edits
 
-An editable document (`#!cpp Editable == true`) can be changed after parsing, with [`set`](set.md),
+An editable document (`#!cpp view_mode::editable`) can be changed after parsing, with [`set`](set.md),
 [`push_back`](push_back.md), [`insert`](insert.md), and [`erase`](erase.md);
 [`json_editable_document`](../json_editable_document.md) and
 [`ordered_json_editable_document`](../ordered_json_editable_document.md) are the corresponding specializations. A few

docs/mkdocs/docs/api/basic_json_document/insert.md

@@ -5,7 +5,7 @@ template<typename I, typename V>
 view_type insert(view_type array, I idx, V&& value);
 ```
 
-Only an **editable** document (`#!cpp Editable == true`, e.g. [`json_editable_document`](../json_editable_document.md))
+Only an **editable** document (`#!cpp view_mode::editable`, e.g. [`json_editable_document`](../json_editable_document.md))
 has `insert`; calling it on a read-only `basic_json_document` fails to compile (`#!cpp static_assert`).
 
 Inserts `value` into `array` as a new element before position `idx`, which must not be past the end

docs/mkdocs/docs/api/basic_json_document/load.md

@@ -55,10 +55,7 @@ validate with overload 2 first, if the original vector must survive a failed loa
 
 ## Exceptions
 
-On a big-endian target, throws [`type_error.320`](../../home/exceptions.md#jsonexceptiontype_error320) -- the same
-exception [`save()`](save.md#exceptions) throws there, since the image format is little-endian only.
-
-Otherwise throws [`parse_error.116`](../../home/exceptions.md#jsonexceptionparse_error116) if `image` is not one
+Throws [`parse_error.116`](../../home/exceptions.md#jsonexceptionparse_error116) if `image` is not one
 `save()` could have written, or fails the requested `check`:
 
 | message               | when                                                                                                |
@@ -95,6 +92,9 @@ are checked once, however many nodes refer to it.
 
 ## Notes
 
+**Little-endian targets only.** On a big-endian target, `load()` does not exist, just like
+[`save()`](save.md#notes): the image format is little-endian, so a call fails to compile.
+
 ### `image_check` { #image_check }
 
 ```cpp

docs/mkdocs/docs/api/basic_json_document/push_back.md

@@ -13,7 +13,7 @@ editable, and it does not have to be `array`'s own document -- which is copied s
 source document afterward; a `BasicJsonType` value; or anything `BasicJsonType` can be constructed from (numbers,
 strings, `#!cpp bool`, `#!cpp nullptr`, containers, ...).
 
-Only an **editable** document (`#!cpp Editable == true`, e.g. [`json_editable_document`](../json_editable_document.md))
+Only an **editable** document (`#!cpp view_mode::editable`, e.g. [`json_editable_document`](../json_editable_document.md))
 has `push_back`; calling it on a read-only `basic_json_document` fails to compile (`#!cpp static_assert`).
 
 ## Template parameters

docs/mkdocs/docs/api/basic_json_document/save.md

@@ -12,7 +12,7 @@ An edited document is written in its *current* state, with its values in documen
 parser would have produced them for that JSON text: a member [`set`](set.md) added goes at the end, an
 [`erase`](erase.md)d member leaves no trace, and a float that is not finite (NaN or positive/negative infinity)
 becomes null, the same substitution [`dump()`](../basic_json_view/dump.md) makes. The same document always saves to
-the same bytes -- also across `BasicJsonType` and `#!cpp Editable`, since the image reflects document order and
+the same bytes -- also across `BasicJsonType` and the [`view_mode`](../view_mode.md), since the image reflects document order and
 values only, not which specialization produced them.
 
 ## Return value
@@ -31,9 +31,6 @@ Throws [`type_error.320`](../../home/exceptions.md#jsonexceptiontype_error320) i
 [discarded](is_discarded.md) -- a default-constructed document, or one a failed [`parse()`](parse.md)/
 [`read()`](read.md) with `allow_exceptions == false` left discarded.
 
-On a big-endian target, throws `type_error.320` with a different message instead: the image format is little-endian
-only (see [Notes](#notes)).
-
 Throws [`out_of_range.416`](../../home/exceptions.md#jsonexceptionout_of_range416) if the node count, the text, or
 the decoded strings of the image would individually reach 4 GiB -- the same 32-bit offsets
 [`parse()`](parse.md#exceptions) and, for edits, [`set`](set.md)/[`push_back`](push_back.md) are already limited to.
@@ -44,9 +41,6 @@ the decoded strings of the image would individually reach 4 GiB -- the same 32-b
     [json.exception.type_error.320] cannot save a discarded json_document
     ```
     ```
-    [json.exception.type_error.320] json_document images need a little-endian target
-    ```
-    ```
     [json.exception.out_of_range.416] images of 4 GiB or more are not supported by json_document
     ```
 
@@ -70,9 +64,9 @@ else -- see [`load`'s Exceptions](load.md#exceptions).
     the *same* build on the *same* (little-endian) machine -- not as a long-term storage format. Keep the original
     JSON text if you need to read a saved document back with a future library version.
 
-**Little-endian only.** The image is written as raw little-endian bytes, with no byte-swapping. `save()` (and
-[`load`](load.md)) throw `type_error.320` on a big-endian target rather than silently produce bytes a big-endian
-reader could not interpret correctly.
+**Little-endian targets only.** The image is written as raw little-endian bytes, with no byte-swapping. On a
+big-endian target, `save()` and [`load`](load.md) do not exist: a call fails to compile rather than produce bytes a
+big-endian reader could not interpret correctly.
 
 ## Examples
 

docs/mkdocs/docs/api/basic_json_document/set.md

@@ -18,7 +18,7 @@ template<typename V>
 view_type set(const json_pointer& ptr, V&& value);
 ```
 
-Only an **editable** document (`#!cpp Editable == true`, e.g. [`json_editable_document`](../json_editable_document.md))
+Only an **editable** document (`#!cpp view_mode::editable`, e.g. [`json_editable_document`](../json_editable_document.md))
 has `set`; calling it on a read-only `basic_json_document` fails to compile (`#!cpp static_assert`).
 
 1. Replaces the value `target` refers to with `value`.

docs/mkdocs/docs/api/basic_json_view/basic_json_view.md

@@ -1,20 +1,32 @@
 # <small>nlohmann::basic_json_view::</small>basic_json_view
 
 ```cpp
+// (1)
 basic_json_view() noexcept = default;
+
+// (2) only for Mode == view_mode::editable
+basic_json_view(const basic_json_view<BasicJsonType, view_mode::read_only>& other) noexcept;
 ```
 
-Creates an invalid (discarded) view: [`type()`](type.md) is `#!cpp value_t::discarded` and
-[`is_discarded()`](is_discarded.md) is `#!cpp true`.
+1. Creates an invalid (discarded) view: [`type()`](type.md) is `#!cpp value_t::discarded` and
+   [`is_discarded()`](is_discarded.md) is `#!cpp true`.
+2. Converts a view of a read-only document into a view of an editable document (implicitly), so that a function
+   taking a [`json_editable_view`](../json_editable_view.md) accepts both. The result is a view of the same value of
+   the same read-only document. See [`view_mode`](../view_mode.md) for why there is no conversion the other way.
 
-This is the only constructor a caller can use directly. Every other view is obtained from a
+## Parameters
+
+`other` (in)
+:   a view of a read-only document with the same `BasicJsonType`
+
+Apart from these, a view is obtained from a
 [`basic_json_document`](../basic_json_document/index.md), via [`root()`](../basic_json_document/root.md) or by
 navigating into a container with [`operator[]`](operator[].md), [`at`](at.md), [`front`](front.md), [`back`](back.md),
 [`find`](find.md), or iteration.
 
 ## Exception safety
 
-No-throw guarantee: this constructor never throws exceptions.
+No-throw guarantee: these constructors never throw exceptions.
 
 ## Complexity
 
@@ -45,6 +57,7 @@ placeholder for "no value yet" and later be assigned a real view.
 
 - [is_discarded](is_discarded.md) - return whether the view is invalid
 - [root](../basic_json_document/root.md) - the view of a document's root value
+- [view_mode](../view_mode.md) - whether a document and its views can be edited
 
 ## Version history
 

docs/mkdocs/docs/api/basic_json_view/get.md

@@ -19,16 +19,36 @@ For the types below, the conversion works directly on the flat index -- no `Basi
   document's own buffer of decoded strings (see [`get_string()`](get_string.md))
 - `BasicJsonType` -- equivalent to [`materialize()`](materialize.md)
 - `basic_json_view` -- returns `#!cpp *this`
-- `#!cpp std::vector<U, A>` -- from an array, element by element, each converted with `#!cpp get<U>()`; `#!cpp
-  std::vector<basic_json_view>` keeps a view of every element instead of a value
-- `#!cpp std::map<K, V, C, A>` and `#!cpp std::unordered_map<K, V, H, E, A>`, if `K` is constructible from a `#!cpp
-  (const char*, std::size_t)` pair -- from an object, member by member, each value converted with `#!cpp get<V>()`; with a repeated
-  key, the *last* value is kept, as [`BasicJsonType::parse()`](../basic_json/parse.md) (and
-  [`materialize()`](materialize.md)) does; `#!cpp std::map<std::string, basic_json_view>` keeps views of the members
-  instead of values
+- `#!cpp std::vector<U, A>` of the types above -- from an array, element by element, each converted with
+  `#!cpp get<U>()`; `#!cpp std::vector<basic_json_view>` keeps a view of every element instead of a value
+- `#!cpp std::map<K, basic_json_view, C, A>` and `#!cpp std::unordered_map<K, basic_json_view, H, E, A>`, if `K` is
+  constructible from a `#!cpp (const char*, std::size_t)` pair -- views of the members of an object; with a repeated
+  key, the view of the *last* member is kept, as [`BasicJsonType::parse()`](../basic_json/parse.md) keeps its value
 
-Every other `T` -- `#!cpp std::list`, `#!cpp std::pair`, `#!cpp std::array`, enumerations, user types with a
-`from_json()`, ... -- is converted by `#!cpp materialize().get<T>()`: the subtree is built into a real `BasicJsonType`
+A default-constructible `T` whose `from_json()` accepts views reads the view directly as well, without building a
+`BasicJsonType` value. This covers the library's own conversions of the standard library types -- all other
+`#!cpp std::vector`s, `#!cpp std::map`/`#!cpp std::unordered_map` (also with other key types), `#!cpp std::list`,
+`#!cpp std::deque`, `#!cpp std::set`, `#!cpp std::forward_list`, `#!cpp std::valarray`, `#!cpp std::array`, C arrays,
+`#!cpp std::pair`, `#!cpp std::tuple`, `#!cpp std::optional`, enumerations, `#!cpp std::filesystem::path`, ... --
+which give the same values as `#!cpp materialize().get<T>()` (from an object, a repeated key keeps the *last* value,
+as [`BasicJsonType::parse()`](../basic_json/parse.md) does), as well as the types of the
+[`NLOHMANN_DEFINE_TYPE_*`](../macros/nlohmann_define_type_intrusive.md) and
+[`NLOHMANN_DEFINE_DERIVED_TYPE_*`](../macros/nlohmann_define_derived_type.md) macros and the enumerations of
+[`NLOHMANN_JSON_SERIALIZE_ENUM`](../macros/nlohmann_json_serialize_enum.md), and any `from_json()` constrained to
+accept views, e.g. with [`is_json_view`](../is_json_view.md). A `from_json()` that also accepts types that are no JSON
+values at all, such as the unconstrained `#!cpp template<typename BasicJsonType> void from_json(const BasicJsonType&,
+T&)` of [arbitrary type conversions](../../features/arbitrary_types.md), is not called with a view: it may use
+`BasicJsonType` functions a view does not have. See [Writing generic code](../../features/json_view.md#writing-generic-code).
+
+!!! warning "Duplicate keys"
+
+    Such a `from_json()` looks members up in the view, where a repeated key finds the **first** member, while
+    `#!cpp materialize().get<T>()` sees the **last** one, as [`BasicJsonType::parse()`](../basic_json/parse.md)
+    keeps it: for `#!cpp {"x":1,"x":2}`, `#!cpp get<point>()` reads `#!cpp x == 1`. See
+    [Duplicate keys](../../features/json_view.md#duplicate-keys).
+
+Every other `T` -- user types whose `from_json()` is written for `BasicJsonType` only, types without a default
+constructor, `#!cpp std::tuple`s holding references, ... -- is converted by `#!cpp materialize().get<T>()`: the subtree is built into a real `BasicJsonType`
 value first (as [`BasicJsonType::parse()`](../basic_json/parse.md) would), and converted from there exactly as
 [`BasicJsonType::get<T>()`](../basic_json/get.md) would convert it.
 
@@ -53,12 +73,15 @@ Strong guarantee: there are no changes to the view or the document it refers to.
   throws for the same JSON type and `T`.
 - For `#!cpp std::vector<U, A>`: throws `type_error.302` if the value is not an array; otherwise, whatever converting
   an element to `U` throws.
-- For `#!cpp std::map`/`#!cpp std::unordered_map`: throws `type_error.302` if the value is not an object; otherwise,
-  whatever converting a member to the mapped type throws.
+- For `#!cpp std::map`/`#!cpp std::unordered_map` of views: throws `type_error.302` if the value is not an object.
+- For a `T` whose `from_json()` reads the view: whatever that `from_json()` throws; for the library's conversions and
+  the macros, the same exceptions with the same messages as [`BasicJsonType::get<T>()`](../basic_json/get.md) of the
+  same value.
 - For every other `T`: whatever [`materialize().get<T>()`](../basic_json/get.md) throws -- typically `type_error.302`,
   or whatever a user-provided `from_json()` throws.
 
-None of the exceptions thrown directly by this function (the first three bullets above) carry a
+None of the exceptions thrown directly by this function or by a `from_json()` that reads the view (the first four
+bullets above) carry a
 [`JSON_DIAGNOSTICS`](../macros/json_diagnostics.md) path: the view has no `BasicJsonType` value to point at. An
 exception thrown while converting through `materialize()` (the last bullet) is different: it is thrown by a real
 `BasicJsonType` value, so it **does** carry a `JSON_DIAGNOSTICS` path if `BasicJsonType` was built with it enabled.
@@ -76,6 +99,8 @@ document.
 - `#!cpp std::map`/`#!cpp std::unordered_map`: linear in the number of members for walking them, plus the container's
   own insertion cost per member (logarithmic for `#!cpp std::map`, amortized constant for `#!cpp
   std::unordered_map`), times the complexity of converting one member to the mapped type.
+- a `T` whose `from_json()` reads the view: the cost of that `from_json()`; for the macros, linear in the number of
+  members times the cost of a lookup, plus the cost of converting the members.
 - every other `T`: the cost of [`materialize()`](materialize.md) and of destroying the `BasicJsonType` value
   afterwards, plus that of [`BasicJsonType::get<T>()`](../basic_json/get.md).
 

docs/mkdocs/docs/api/basic_json_view/get_to.md

@@ -5,12 +5,13 @@ template<typename T>
 T& get_to(T& v) const;
 ```
 
-Converts the value to `T` and stores it in `v`, in one of two ways:
+Converts the value to `T` and stores it in `v`, in one of three ways:
 
 - For the types that [`get<T>()`](get.md) converts directly -- arithmetic types, `#!cpp bool`,
   `#!cpp std::nullptr_t`, [`string_view_t`](index.md#member-types), `#!cpp std::basic_string`, `BasicJsonType`,
-  `basic_json_view`, `#!cpp std::vector`, and `#!cpp std::map`/`#!cpp std::unordered_map` with string keys -- `v` is
-  assigned: `#!cpp v = get<T>()`.
+  `basic_json_view`, vectors of these, and maps of views -- `v` is assigned: `#!cpp v = get<T>()`.
+- For a type whose `from_json()` accepts views (see [`get<T>()`](get.md)), that `from_json()` is called with the
+  view and the existing `v`, without building a `BasicJsonType` value.
 - For every other type, the subtree is built into a `BasicJsonType` value and `#!cpp materialize().get_to(v)` is
   called, i.e. `from_json()` is invoked with the existing `v`, exactly as
   [`BasicJsonType::get_to()`](../basic_json/get_to.md) does.

docs/mkdocs/docs/api/basic_json_view/index.md

@@ -3,7 +3,7 @@
 <small>Defined in header `<nlohmann/json_view.hpp>`</small>
 
 ```cpp
-template<typename BasicJsonType, bool Editable = false>
+template<typename BasicJsonType, view_mode Mode = view_mode::read_only>
 class basic_json_view;
 ```
 
@@ -37,7 +37,7 @@ Moving the document itself does not invalidate its views: the index is heap-allo
 `#!cpp operator ValueType()`), and no `#!cpp get_ptr()` or `#!cpp get_ref()`; see [`get`](get.md).
 
 `basic_json_view` itself is always read-only -- it never has a `set` or `push_back` of its own. A view of an
-**editable** document (`#!cpp Editable == true`) sees every edit made through
+**editable** document (`#!cpp view_mode::editable`) sees every edit made through
 [`basic_json_document::set`](../basic_json_document/set.md) and
 [`basic_json_document::push_back`](../basic_json_document/push_back.md): once a value is changed, every view that
 still refers to it -- including ones taken before the change -- reads the new value. See
@@ -49,9 +49,10 @@ still refers to it -- including ones taken before the change -- reads the new va
 :   a specialization of [`basic_json`](../basic_json/index.md), matching the
     [`basic_json_document`](../basic_json_document/index.md) the view was taken from.
 
-`Editable`
-:   whether the view is of an editable document, matching the [`basic_json_document`](../basic_json_document/index.md)
-    it was taken from (optional, `#!cpp false` by default). See [Edits](../basic_json_document/index.md#edits).
+`Mode`
+:   a [`view_mode`](../view_mode.md): whether the view is of an editable document, matching the
+    [`basic_json_document`](../basic_json_document/index.md) it was taken from (optional, `#!cpp view_mode::read_only` by
+    default). See [Edits](../basic_json_document/index.md#edits).
 
 ## Specializations
 
@@ -63,6 +64,7 @@ still refers to it -- including ones taken before the change -- reads the new va
 
 ## Member types
 
+- **basic_json_type** - `BasicJsonType` (it also marks the class for [`is_json_view`](../is_json_view.md))
 - **value_t** - the JSON type enumeration, see [`basic_json::value_t`](../basic_json/value_t.md)
 - **string_t**, **number_integer_t**, **number_unsigned_t**, **number_float_t**, **json_pointer** - the corresponding
   member types of `BasicJsonType`

docs/mkdocs/docs/api/byte_container_with_subtype/index.md

@@ -6,7 +6,7 @@ class byte_container_with_subtype : public BinaryType;
 ```
 
 This type extends the template parameter `BinaryType` provided to [`basic_json`](../basic_json/index.md) with a subtype
-used by BSON and MessagePack. This type exists so that the user does not have to specify a type themselves with a
+used by BSON, CBOR, and MessagePack. This type exists so that the user does not have to specify a type themselves with a
 specific naming scheme in order to override the binary type.
 
 ## Template parameters

docs/mkdocs/docs/api/is_json_view.md

@@ -0,0 +1,56 @@
+# <small>nlohmann::</small>is_json_view
+
+<small>Defined in header `<nlohmann/json_view.hpp>`</small>
+
+```cpp
+template<typename T>
+struct is_json_view;
+```
+
+A type trait: `#!cpp is_json_view<T>::value` is `#!cpp true` if `T` is a [`basic_json_view`](basic_json_view/index.md)
+of any `BasicJsonType` and any [`view_mode`](view_mode.md) -- [`json_view`](json_view.md),
+[`json_editable_view`](json_editable_view.md), [`ordered_json_view`](ordered_json_view.md), ... -- and
+`#!cpp false` otherwise, for [`basic_json`](basic_json/index.md) as well.
+
+It is meant for constraining templates that accept views, in particular a `from_json()` that should read views
+directly: [`get<T>()`](basic_json_view/get.md) on a view calls a `from_json()` with the view only if that `from_json()`
+accepts views but not arbitrary types.
+
+## Template parameters
+
+`T`
+:   the type to check (without cv-qualifiers or references)
+
+## Notes
+
+A view is recognized by its member type `basic_json_type` (a [`basic_json`](basic_json/index.md) specialization) and
+its [`materialize()`](basic_json_view/materialize.md) returning that type, so the trait needs no declaration of the
+view class.
+
+## Examples
+
+??? example
+
+    The example below shows the trait, and a `from_json()` constrained to `json` values and views: `get<T>()` on a view
+    reads the view directly.
+
+    ```cpp
+    --8<-- "examples/is_json_view.cpp"
+    ```
+
+    Output:
+
+    ```
+    --8<-- "examples/is_json_view.output"
+    ```
+
+## See also
+
+- [basic_json_view](basic_json_view/index.md) - a handle to one value of a document
+- [get](basic_json_view/get.md) - which conversions read the view directly
+- [view_mode](view_mode.md) - read-only or editable
+- [Writing generic code](../features/json_view.md#writing-generic-code) - functions and `from_json()` for views
+
+## Version history
+
+Added in version 3.13.0.

docs/mkdocs/docs/api/json_document.md

@@ -3,7 +3,7 @@
 <small>Defined in header `<nlohmann/json_view.hpp>`</small>
 
 ```cpp
-using json_document = basic_json_document<json>;
+using json_document = basic_json_document<json, view_mode::read_only>;
 ```
 
 This type is a [`basic_json_document`](basic_json_document/index.md) of the default [`json`](json.md)

docs/mkdocs/docs/api/json_editable_document.md

@@ -3,7 +3,7 @@
 <small>Defined in header `<nlohmann/json_view.hpp>`</small>
 
 ```cpp
-using json_editable_document = basic_json_document<json, true>;
+using json_editable_document = basic_json_document<json, view_mode::editable>;
 ```
 
 This type is an **editable** [`basic_json_document`](basic_json_document/index.md) of the default

docs/mkdocs/docs/api/json_editable_view.md

@@ -3,7 +3,7 @@
 <small>Defined in header `<nlohmann/json_view.hpp>`</small>
 
 ```cpp
-using json_editable_view = basic_json_view<json, true>;
+using json_editable_view = basic_json_view<json, view_mode::editable>;
 ```
 
 This type is a [`basic_json_view`](basic_json_view/index.md) of a value of a

docs/mkdocs/docs/api/json_pointer/parent_pointer.md

@@ -12,7 +12,8 @@ Parent of this JSON pointer; in case this JSON pointer is the root, the root its
 
 ## Exception safety
 
-No-throw guarantee: this function never throws exceptions.
+Strong exception safety: if an exception occurs, the original value stays intact. The function is not `#!cpp noexcept`
+and allocates a new JSON pointer, so it can throw `#!cpp std::bad_alloc`; it throws no library exceptions.
 
 ## Complexity
 

docs/mkdocs/docs/api/json_view.md

@@ -3,7 +3,7 @@
 <small>Defined in header `<nlohmann/json_view.hpp>`</small>
 
 ```cpp
-using json_view = basic_json_view<json>;
+using json_view = basic_json_view<json, view_mode::read_only>;
 ```
 
 This type is a [`basic_json_view`](basic_json_view/index.md) of a value of a [`json_document`](json_document.md).

docs/mkdocs/docs/api/macros/index.md

@@ -43,8 +43,6 @@ header. See also the [macro overview page](../../features/macros.md).
 - [**JSON_SKIP_UNSUPPORTED_COMPILER_CHECK**](json_skip_unsupported_compiler_check.md) - do not warn about unsupported compilers
 - [**JSON_USE_GLOBAL_UDLS**](json_use_global_udls.md) - place user-defined string literals (UDLs) into the global namespace
 - [**JSON_USE_SIMDUTF**](json_use_simdutf.md) - use the simdutf library to accelerate UTF-8 validation
-- [**JSON_VIEW_NO_SIMD**](json_view_no_simd.md) - use only portable code in the parser of `json_view.hpp`
-- [**JSON_VIEW_USE_SSSE3**](json_view_use_ssse3.md) - validate non-ASCII strings with SSSE3 in the parser of `json_view.hpp`
 
 ## Library version
 

docs/mkdocs/docs/api/macros/json_no_simd.md

@@ -5,7 +5,8 @@
 ```
 
 When defined, the library uses only portable C++ code where it would otherwise use vector instructions: when scanning
-strings during parsing, and when writing floating-point numbers during serialization.
+strings during parsing, and when writing floating-point numbers during serialization. This includes the parser of
+[`basic_json_document`](../basic_json_document/index.md) (`<nlohmann/json_view.hpp>`).
 
 The macro is an escape hatch, for example for toolchains that cannot compile the vector code, for sanitizers or
 analyzers that do not understand it, or to compare the speed of both variants. It does not change any result: values,
@@ -77,6 +78,7 @@ By default, `#!cpp JSON_NO_SIMD` is not defined, and vector instructions are use
 - [**JSON_USE_SIMDUTF**](json_use_simdutf.md) - use the simdutf library to accelerate UTF-8 validation
 - [**JSON_DISABLE_STREAM_BULK_SCAN**](json_disable_stream_bulk_scan.md) - read a `std::istream` one character at a time
 - [Parsing: input sources and performance](../../features/parsing/index.md#input-sources-and-performance)
+- [json_view](../../features/json_view.md) - the zero-copy view, whose parser the macro also affects
 
 ## Version history
 

docs/mkdocs/docs/api/macros/json_view_no_simd.md

@@ -1,52 +0,0 @@
-# JSON_VIEW_NO_SIMD
-
-```cpp
-#define JSON_VIEW_NO_SIMD
-```
-
-When defined, the parser of [`basic_json_document`](../basic_json_document/index.md) (`<nlohmann/json_view.hpp>`)
-uses only portable C++ to scan strings. By default, it scans long runs of string bytes 16 at a time with NEON on
-AArch64 (with GCC and Clang) and SSE2 on x86-64, which are part of the baseline instruction sets of these
-architectures, and validates non-ASCII text with NEON (or SSSE3, see
-[`JSON_VIEW_USE_SSSE3`](json_view_use_ssse3.md)).
-
-The same input is accepted or rejected either way, with the same values, and errors are reported the same way; only
-the speed differs. The macro exists for platforms whose compilers lack the intrinsics headers, and to test the portable
-code.
-
-!!! note "ABI compatibility"
-
-    The macro selects between two definitions of the same inline functions. Whether it is defined is encoded in the
-    [namespace](../../features/namespace.md) (tag `_vns`), resulting in distinct symbol names. Translation units
-    compiled with and without it can therefore be linked into the same program without One Definition Rule (ODR)
-    violations, but they cannot exchange instances of library types.
-
-## Default definition
-
-By default, `#!cpp JSON_VIEW_NO_SIMD` is not defined, and the vector code is used where available.
-
-```cpp
-#undef JSON_VIEW_NO_SIMD
-```
-
-## Examples
-
-??? example
-
-    The code below uses the portable string scanning of the view.
-
-    ```cpp
-    #define JSON_VIEW_NO_SIMD
-    #include <nlohmann/json_view.hpp>
-
-    ...
-    ```
-
-## See also
-
-- [JSON_VIEW_USE_SSSE3](json_view_use_ssse3.md) - validate non-ASCII strings with SSSE3 on x86-64
-- [json_view](../../features/json_view.md) - the zero-copy view
-
-## Version history
-
-- Added in version 3.13.0.

docs/mkdocs/docs/api/macros/json_view_use_ssse3.md

@@ -1,53 +0,0 @@
-# JSON_VIEW_USE_SSSE3
-
-```cpp
-#define JSON_VIEW_USE_SSSE3
-```
-
-When defined on x86-64, the parser of [`basic_json_document`](../basic_json_document/index.md)
-(`<nlohmann/json_view.hpp>`) validates non-ASCII text in strings with SSSE3 without asking the CPU first.
-
-By default, the parser checks once at run time whether the CPU has SSSE3 (all x86-64 CPUs since about 2011 have it)
-and then validates non-ASCII text 16 bytes at a time, using the "lookup4" algorithm of
-[simdjson](https://github.com/simdjson/simdjson); on CPUs without SSSE3, it validates one UTF-8 sequence at a time.
-The vector check is compiled for SSSE3 with a function attribute (GCC 4.9 and later, Clang), so this needs no compiler
-option. With MSVC, the check uses `__cpuid`. On AArch64, the vector check uses NEON and is always on.
-
-Define the macro only together with a compiler option that enables SSSE3 (e.g. `-mssse3`, or `-march=` with a CPU that
-has it), and only for programs that run on such CPUs. It saves the check of the CPU, which costs little. The same
-input is accepted or rejected either way; only the speed of non-ASCII text differs.
-
-!!! note "ABI compatibility"
-
-    The macro selects between two definitions of the same inline functions. Whether it is defined is encoded in the
-    [namespace](../../features/namespace.md) (tag `_vssse3`, on every architecture), resulting in distinct symbol
-    names. Translation units compiled with and without it can therefore be linked into the same program without One
-    Definition Rule (ODR) violations, but they cannot exchange instances of library types.
-
-## Default definition
-
-By default, `#!cpp JSON_VIEW_USE_SSSE3` is not defined.
-
-```cpp
-#undef JSON_VIEW_USE_SSSE3
-```
-
-## Examples
-
-??? example
-
-    With CMake, for a program that only runs on CPUs with SSSE3:
-
-    ```cmake
-    target_compile_definitions(your_target PRIVATE JSON_VIEW_USE_SSSE3)
-    target_compile_options(your_target PRIVATE -mssse3)
-    ```
-
-## See also
-
-- [JSON_VIEW_NO_SIMD](json_view_no_simd.md) - use only portable code in the view's parser
-- [JSON_USE_SIMDUTF](json_use_simdutf.md) - validate UTF-8 with simdutf in `basic_json`'s parser
-
-## Version history
-
-- Added in version 3.13.0.

docs/mkdocs/docs/api/macros/nlohmann_define_derived_type.md

@@ -147,6 +147,13 @@ void to_json(BasicJsonType& j, const B& b) {
     See Implementation limits for [NLOHMANN_DEFINE_TYPE_INTRUSIVE](nlohmann_define_type_intrusive.md) and
     [NLOHMANN_DEFINE_TYPE_NON_INTRUSIVE](nlohmann_define_type_non_intrusive.md), respectively.
 
+!!! info "Views"
+
+    The generated `from_json()` also reads the views of [`json_document`](../json_document.md)s
+    (`<nlohmann/json_view.hpp>`): [`get<T>()`](../basic_json_view/get.md) on a view looks the members up in the
+    view, without building a `json` value first. The base part is read from the view as well if the base's
+    `from_json()` accepts views, and from [`materialize()`](../basic_json_view/materialize.md) otherwise.
+
 ## Examples
 
 ??? example "Example: (1) NLOHMANN_DEFINE_DERIVED_TYPE_INTRUSIVE"
@@ -192,3 +199,5 @@ void to_json(BasicJsonType& j, const B& b) {
 6. Added in version 3.12.0.
 
 All six macros were changed to allow an empty member list in version 3.13.0.
+
+The generated `from_json()` reads the views of `json_document`s since version 3.13.0.

docs/mkdocs/docs/api/macros/nlohmann_define_type_intrusive.md

@@ -81,6 +81,12 @@ See the examples below for the concrete generated code.
       that serializes a struct's members positionally into a JSON array; for that, write `to_json`/`from_json` by
       hand, building/reading a `json::array()` of the members in order.
 
+!!! info "Views"
+
+    The generated `from_json()` also reads the views of [`json_document`](../json_document.md)s
+    (`<nlohmann/json_view.hpp>`): [`get<T>()`](../basic_json_view/get.md) on a view looks the members up in the
+    view, without building a `json` value first.
+
 ## Examples
 
 ??? example "Example: (1) NLOHMANN_DEFINE_TYPE_INTRUSIVE"
@@ -189,3 +195,5 @@ See the examples below for the concrete generated code.
 
 All three macros were changed to work with any `basic_json` specialization (not only `nlohmann::json`) in version 3.12.0,
 and to allow an empty member list in version 3.13.0.
+
+The generated `from_json()` reads the views of `json_document`s since version 3.13.0.

docs/mkdocs/docs/api/macros/nlohmann_define_type_non_intrusive.md

@@ -80,6 +80,12 @@ See the examples below for the concrete generated code.
       that serializes a struct's members positionally into a JSON array; for that, write `to_json`/`from_json` by
       hand, building/reading a `json::array()` of the members in order.
 
+!!! info "Views"
+
+    The generated `from_json()` also reads the views of [`json_document`](../json_document.md)s
+    (`<nlohmann/json_view.hpp>`): [`get<T>()`](../basic_json_view/get.md) on a view looks the members up in the
+    view, without building a `json` value first.
+
 ## Examples
 
 ??? example "Example: (1) NLOHMANN_DEFINE_TYPE_NON_INTRUSIVE"
@@ -188,3 +194,5 @@ See the examples below for the concrete generated code.
 
 All three macros were changed to work with any `basic_json` specialization (not only `nlohmann::json`) in version 3.12.0,
 and to allow an empty member list in version 3.13.0.
+
+The generated `from_json()` reads the views of `json_document`s since version 3.13.0.

docs/mkdocs/docs/api/macros/nlohmann_json_namespace.md

@@ -39,6 +39,6 @@ the library.
 ## Version history
 
 - Added in version 3.11.0. Changed inline namespace name in version 3.11.2. Added the ABI tag `_dp` in
-  version 3.12.0, and the ABI tags `_bics`, `_psp`, `_snul`, `_sbu8`, `_ekmo`, `_dsbs`, `_dufio`, `_ns`, `_vns`,
-  and `_vssse3` in version 3.13.0; see
+  version 3.12.0, and the ABI tags `_bics`, `_psp`, `_snul`, `_sbu8`, `_ekmo`, `_dsbs`, `_dufio`, and `_ns` in
+  version 3.13.0; see
   [`nlohmann` Namespace](../../features/namespace.md#structure).

docs/mkdocs/docs/api/macros/nlohmann_json_serialize_enum.md

@@ -45,6 +45,12 @@ inline void from_json(const BasicJsonType& j, type& e);
       Define [`JSON_USE_OBJECTS_FOR_ENUM_KEYED_MAPS`](json_use_objects_for_enum_keyed_maps.md) to store them as objects
       with the converted keys. Such maps can be read from both forms.
 
+!!! info "Views"
+
+    The generated `from_json()` also reads the views of [`json_document`](../json_document.md)s
+    (`<nlohmann/json_view.hpp>`), comparing the view with the entries of the mapping, without building a `json` value
+    first.
+
 ## Examples
 
 ??? example "Example: Basic usage"
@@ -88,3 +94,5 @@ inline void from_json(const BasicJsonType& j, type& e);
 ## Version history
 
 Added in version 3.4.0.
+
+The generated `from_json()` reads the views of `json_document`s since version 3.13.0.

docs/mkdocs/docs/api/macros/nlohmann_json_serialize_enum_strict.md

@@ -48,6 +48,12 @@ inline void from_json(const BasicJsonType& j, type& e);
       Define [`JSON_USE_OBJECTS_FOR_ENUM_KEYED_MAPS`](json_use_objects_for_enum_keyed_maps.md) to store them as objects
       with the converted keys. Such maps can be read from both forms.
 
+!!! info "Views"
+
+    The generated `from_json()` also reads the views of [`json_document`](../json_document.md)s
+    (`<nlohmann/json_view.hpp>`), comparing the view with the entries of the mapping, without building a `json` value
+    first.
+
 ## Examples
 
 ??? example "Example: Basic usage"

docs/mkdocs/docs/api/operator_ltlt.md

@@ -37,7 +37,8 @@ the stream `o`
 1. Throws [`type_error.316`](../home/exceptions.md#jsonexceptiontype_error316) if a string stored inside the JSON
    value is not UTF-8 encoded. Note that unlike the [`dump`](basic_json/dump.md) member functions, no `error_handler`
    can be set.
-2. None.
+2. Throws no library exceptions. As the string representation is built with [`to_string`](json_pointer/to_string.md),
+   `#!cpp std::bad_alloc` is possible.
 
 ## Complexity
 

docs/mkdocs/docs/api/ordered_json_document.md

@@ -3,7 +3,7 @@
 <small>Defined in header `<nlohmann/json_view.hpp>`</small>
 
 ```cpp
-using ordered_json_document = basic_json_document<ordered_json>;
+using ordered_json_document = basic_json_document<ordered_json, view_mode::read_only>;
 ```
 
 This type is a [`basic_json_document`](basic_json_document/index.md) of the [`ordered_json`](ordered_json.md)

docs/mkdocs/docs/api/ordered_json_editable_document.md

@@ -3,7 +3,7 @@
 <small>Defined in header `<nlohmann/json_view.hpp>`</small>
 
 ```cpp
-using ordered_json_editable_document = basic_json_document<ordered_json, true>;
+using ordered_json_editable_document = basic_json_document<ordered_json, view_mode::editable>;
 ```
 
 This type is an **editable** [`basic_json_document`](basic_json_document/index.md) of the

docs/mkdocs/docs/api/ordered_json_editable_view.md

@@ -3,7 +3,7 @@
 <small>Defined in header `<nlohmann/json_view.hpp>`</small>
 
 ```cpp
-using ordered_json_editable_view = basic_json_view<ordered_json, true>;
+using ordered_json_editable_view = basic_json_view<ordered_json, view_mode::editable>;
 ```
 
 This type is a [`basic_json_view`](basic_json_view/index.md) of a value of an

docs/mkdocs/docs/api/ordered_json_view.md

@@ -3,7 +3,7 @@
 <small>Defined in header `<nlohmann/json_view.hpp>`</small>
 
 ```cpp
-using ordered_json_view = basic_json_view<ordered_json>;
+using ordered_json_view = basic_json_view<ordered_json, view_mode::read_only>;
 ```
 
 This type is a [`basic_json_view`](basic_json_view/index.md) of a value of an

docs/mkdocs/docs/api/view_mode.md

@@ -0,0 +1,89 @@
+# <small>nlohmann::</small>view_mode
+
+<small>Defined in header `<nlohmann/json_view.hpp>`</small>
+
+```cpp
+enum class view_mode : std::uint8_t
+{
+    read_only,
+    editable
+};
+```
+
+The second template parameter of [`basic_json_document`](basic_json_document/index.md) and
+[`basic_json_view`](basic_json_view/index.md): whether a document can be changed after parsing, and whether a view is
+of such a document.
+
+`read_only`
+:   the default: the document is parsed once and then only read. It carries none of the bookkeeping edits need, and
+    calling [`set`](basic_json_document/set.md), [`push_back`](basic_json_document/push_back.md),
+    [`insert`](basic_json_document/insert.md), or [`erase`](basic_json_document/erase.md) on it fails to compile.
+
+`editable`
+:   the document also offers [`set`](basic_json_document/set.md), [`push_back`](basic_json_document/push_back.md),
+    [`insert`](basic_json_document/insert.md), and [`erase`](basic_json_document/erase.md); its views see every edit,
+    see [Edits](basic_json_document/index.md#edits).
+
+The shortcuts name both modes: [`json_document`](json_document.md) and [`json_view`](json_view.md) are read-only,
+[`json_editable_document`](json_editable_document.md) and [`json_editable_view`](json_editable_view.md) are editable
+(and likewise for `ordered_json`).
+
+## Notes
+
+The mode is a compile-time property of the document's and the view's type, not a setting of a call. A read-only view
+reads a container in place, while a view of an editable document follows the links that edits leave behind. A view of
+a read-only document converts implicitly to a view of an editable document of the same `BasicJsonType`: a read-only
+document has no edits, so the converted view reads it like an editable document before its first edit (at the cost of
+one check per access). There is no conversion the other way, because a read-only view of an editable document would
+read wrong values after the next edit.
+
+A function that takes a [`json_editable_view`](json_editable_view.md) therefore accepts the views of both modes. A
+function template deduces the mode from its argument instead, without conversions, so it names the modes it accepts in
+its signature:
+
+```cpp
+// views of editable documents only
+template<typename BasicJsonType>
+void f(basic_json_view<BasicJsonType, view_mode::editable> v);
+
+// views of read-only documents only
+template<typename BasicJsonType>
+void f(basic_json_view<BasicJsonType, view_mode::read_only> v);
+
+// views of either document type
+template<typename BasicJsonType, view_mode Mode>
+void f(basic_json_view<BasicJsonType, Mode> v);
+```
+
+A function that takes a [`json_view`](json_view.md) accepts neither an [`ordered_json_view`](ordered_json_view.md)
+nor a [`json_editable_view`](json_editable_view.md). Views of the two modes compare with
+[`operator==`](basic_json_view/operator_eq.md).
+
+## Examples
+
+??? example
+
+    The example below shows a function template that accepts the views of both modes, one that accepts only views of
+    editable documents, and a function taking a `json_editable_view` that also accepts a view of a read-only document.
+
+    ```cpp
+    --8<-- "examples/view_mode.cpp"
+    ```
+
+    Output:
+
+    ```
+    --8<-- "examples/view_mode.output"
+    ```
+
+## See also
+
+- [basic_json_document](basic_json_document/index.md) - a parsed JSON text
+- [basic_json_view](basic_json_view/index.md) - a handle to one value of a document
+- [json_editable_document](json_editable_document.md) - an editable document of `json`
+- [(constructor)](basic_json_view/basic_json_view.md) - the conversion from a read-only to an editable view
+- [Writing generic code](../features/json_view.md#writing-generic-code) - functions that accept views
+
+## Version history
+
+Added in version 3.13.0.